3 * Default values for configuration settings.
9 * To customize your installation, edit "LocalSettings.php". If you make
10 * changes here, they will be lost on next upgrade of MediaWiki!
12 * In this file, variables whose default values depend on other
13 * variables are set to false. The actual default value of these variables
14 * will only be set in Setup.php, taking into account any custom settings
15 * performed in LocalSettings.php.
17 * Documentation is in the source and on:
18 * http://www.mediawiki.org/wiki/Manual:Configuration_settings
20 * This program is free software; you can redistribute it and/or modify
21 * it under the terms of the GNU General Public License as published by
22 * the Free Software Foundation; either version 2 of the License, or
23 * (at your option) any later version.
25 * This program is distributed in the hope that it will be useful,
26 * but WITHOUT ANY WARRANTY; without even the implied warranty of
27 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
28 * GNU General Public License for more details.
30 * You should have received a copy of the GNU General Public License along
31 * with this program; if not, write to the Free Software Foundation, Inc.,
32 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
33 * http://www.gnu.org/copyleft/gpl.html
39 * @cond file_level_code
40 * This is not a valid entry point, perform no further processing unless MEDIAWIKI is defined
42 if( !defined( 'MEDIAWIKI' ) ) {
43 echo "This file is part of MediaWiki and is not a valid entry point\n";
47 # Create a site configuration object. Not used for much in a default install.
48 # Note: this (and other things) will break if the autoloader is not enabled.
49 # Please include includes/AutoLoader.php before including this file.
50 $wgConf = new SiteConfiguration
;
53 /** MediaWiki version number */
54 $wgVersion = '1.20alpha';
56 /** Name of the site. It must be changed in LocalSettings.php */
57 $wgSitename = 'MediaWiki';
64 * $wgServer = 'http://example.com';
67 * This is usually detected correctly by MediaWiki. If MediaWiki detects the
68 * wrong server, it will redirect incorrectly after you save a page. In that
69 * case, set this variable to fix it.
71 * If you want to use protocol-relative URLs on your wiki, set this to a
72 * protocol-relative URL like '//example.com' and set $wgCanonicalServer
73 * to a fully qualified URL.
75 $wgServer = WebRequest
::detectServer();
78 * Canonical URL of the server, to use in IRC feeds and notification e-mails.
79 * Must be fully qualified, even if $wgServer is protocol-relative.
81 * Defaults to $wgServer, expanded to a fully qualified http:// URL if needed.
83 $wgCanonicalServer = false;
85 /************************************************************************//**
86 * @name Script path settings
91 * The path we should point to.
92 * It might be a virtual path in case with use apache mod_rewrite for example.
94 * This *needs* to be set correctly.
96 * Other paths will be set to defaults based on it unless they are directly
97 * set in LocalSettings.php
99 $wgScriptPath = '/wiki';
102 * Whether to support URLs like index.php/Page_title These often break when PHP
103 * is set up in CGI mode. PATH_INFO *may* be correct if cgi.fix_pathinfo is set,
104 * but then again it may not; lighttpd converts incoming path data to lowercase
105 * on systems with case-insensitive filesystems, and there have been reports of
106 * problems on Apache as well.
108 * To be safe we'll continue to keep it off by default.
110 * Override this to false if $_SERVER['PATH_INFO'] contains unexpectedly
111 * incorrect garbage, or to true if it is really correct.
113 * The default $wgArticlePath will be set based on this value at runtime, but if
114 * you have customized it, having this incorrectly set to true can cause
115 * redirect loops when "pretty URLs" are used.
118 ( strpos( php_sapi_name(), 'cgi' ) === false ) &&
119 ( strpos( php_sapi_name(), 'apache2filter' ) === false ) &&
120 ( strpos( php_sapi_name(), 'isapi' ) === false );
123 * The extension to append to script names by default. This can either be .php
126 * Some hosting providers use PHP 4 for *.php files, and PHP 5 for *.php5. This
127 * variable is provided to support those providers.
129 $wgScriptExtension = '.php';
134 /************************************************************************//**
135 * @name URLs and file paths
137 * These various web and file path variables are set to their defaults
138 * in Setup.php if they are not explicitly set from LocalSettings.php.
140 * These will relatively rarely need to be set manually, unless you are
141 * splitting style sheets or images outside the main document root.
143 * In this section, a "path" is usually a host-relative URL, i.e. a URL without
144 * the host part, that starts with a slash. In most cases a full URL is also
145 * acceptable. A "directory" is a local file path.
147 * In both paths and directories, trailing slashes should not be included.
153 * The URL path to index.php.
155 * Defaults to "{$wgScriptPath}/index{$wgScriptExtension}".
160 * The URL path to redirect.php. This is a script that is used by the Nostalgia
163 * Defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}".
165 $wgRedirectScript = false;
168 * The URL path to load.php.
170 * Defaults to "{$wgScriptPath}/load{$wgScriptExtension}".
172 $wgLoadScript = false;
175 * The URL path of the skins directory.
176 * Defaults to "{$wgScriptPath}/skins".
178 $wgStylePath = false;
179 $wgStyleSheetPath = &$wgStylePath;
182 * The URL path of the skins directory. Should not point to an external domain.
183 * Defaults to "{$wgScriptPath}/skins".
185 $wgLocalStylePath = false;
188 * The URL path of the extensions directory.
189 * Defaults to "{$wgScriptPath}/extensions".
192 $wgExtensionAssetsPath = false;
195 * Filesystem stylesheets directory.
196 * Defaults to "{$IP}/skins".
198 $wgStyleDirectory = false;
201 * The URL path for primary article page views. This path should contain $1,
202 * which is replaced by the article title.
204 * Defaults to "{$wgScript}/$1" or "{$wgScript}?title=$1",
205 * depending on $wgUsePathInfo.
207 $wgArticlePath = false;
210 * The URL path for the images directory.
211 * Defaults to "{$wgScriptPath}/images".
213 $wgUploadPath = false;
216 * The filesystem path of the images directory. Defaults to "{$IP}/images".
218 $wgUploadDirectory = false;
221 * Directory where the cached page will be saved.
222 * Defaults to "{$wgUploadDirectory}/cache".
224 $wgFileCacheDirectory = false;
227 * The URL path of the wiki logo. The logo size should be 135x135 pixels.
228 * Defaults to "{$wgStylePath}/common/images/wiki.png".
233 * The URL path of the shortcut icon.
235 $wgFavicon = '/favicon.ico';
238 * The URL path of the icon for iPhone and iPod Touch web app bookmarks.
239 * Defaults to no icon.
241 $wgAppleTouchIcon = false;
244 * The local filesystem path to a temporary directory. This is not required to
247 * When this setting is set to false, its value will be set through a call
248 * to wfTempDir(). See that methods implementation for the actual detection
251 * Developers should use the global function wfTempDir() instead of this
255 * @note Default changed to false in MediaWiki 1.20.
258 $wgTmpDirectory = false;
261 * If set, this URL is added to the start of $wgUploadPath to form a complete
264 $wgUploadBaseUrl = '';
267 * To enable remote on-demand scaling, set this to the thumbnail base URL.
268 * Full thumbnail URL will be like $wgUploadStashScalerBaseUrl/e/e6/Foo.jpg/123px-Foo.jpg
269 * where 'e6' are the first two characters of the MD5 hash of the file name.
270 * If $wgUploadStashScalerBaseUrl is set to false, thumbs are rendered locally as needed.
272 $wgUploadStashScalerBaseUrl = false;
275 * To set 'pretty' URL paths for actions other than
276 * plain page views, add to this array. For instance:
277 * 'edit' => "$wgScriptPath/edit/$1"
279 * There must be an appropriate script or rewrite rule
280 * in place to handle these URLs.
282 $wgActionPaths = array();
286 /************************************************************************//**
287 * @name Files and file uploads
291 /** Uploads have to be specially set up to be secure */
292 $wgEnableUploads = false;
295 * The maximum age of temporary (incomplete) uploaded files
297 $wgUploadStashMaxAge = 6 * 3600; // 6 hours
299 /** Allows to move images and other media files */
300 $wgAllowImageMoving = true;
303 * These are additional characters that should be replaced with '-' in file names
305 $wgIllegalFileChars = ":";
308 * @deprecated since 1.17 use $wgDeletedDirectory
310 $wgFileStore = array();
313 * What directory to place deleted uploads in
315 $wgDeletedDirectory = false; // Defaults to $wgUploadDirectory/deleted
318 * Set this to true if you use img_auth and want the user to see details on why access failed.
320 $wgImgAuthDetails = false;
323 * If this is enabled, img_auth.php will not allow image access unless the wiki
324 * is private. This improves security when image uploads are hosted on a
327 $wgImgAuthPublicTest = true;
330 * File repository structures
332 * $wgLocalFileRepo is a single repository structure, and $wgForeignFileRepos is
333 * an array of such structures. Each repository structure is an associative
334 * array of properties configuring the repository.
336 * Properties required for all repos:
337 * - class The class name for the repository. May come from the core or an extension.
338 * The core repository classes are FileRepo, LocalRepo, ForeignDBRepo.
339 * FSRepo is also supported for backwards compatibility.
341 * - name A unique name for the repository (but $wgLocalFileRepo should be 'local').
342 * The name should consist of alpha-numberic characters.
343 * - backend A file backend name (see $wgFileBackends).
345 * For most core repos:
346 * - zones Associative array of zone names that each map to an array with:
347 * container : backend container name the zone is in
348 * directory : root path within container for the zone
349 * url : base URL to the root of the zone
350 * Zones default to using "<repo name>-<zone name>" as the container name
351 * and default to using the container root as the zone's root directory.
352 * Nesting of zone locations within other zones should be avoided.
353 * - url Public zone URL. The 'zones' settings take precedence.
354 * - hashLevels The number of directory levels for hash-based division of files
355 * - thumbScriptUrl The URL for thumb.php (optional, not recommended)
356 * - transformVia404 Whether to skip media file transformation on parse and rely on a 404
358 * - initialCapital Equivalent to $wgCapitalLinks (or $wgCapitalLinkOverrides[NS_FILE],
359 * determines whether filenames implicitly start with a capital letter.
360 * The current implementation may give incorrect description page links
361 * when the local $wgCapitalLinks and initialCapital are mismatched.
362 * - pathDisclosureProtection
363 * May be 'paranoid' to remove all parameters from error messages, 'none' to
364 * leave the paths in unchanged, or 'simple' to replace paths with
365 * placeholders. Default for LocalRepo is 'simple'.
366 * - fileMode This allows wikis to set the file mode when uploading/moving files. Default
368 * - directory The local filesystem directory where public files are stored. Not used for
370 * - thumbDir The base thumbnail directory. Defaults to "<directory>/thumb".
371 * - thumbUrl The base thumbnail URL. Defaults to "<url>/thumb".
374 * These settings describe a foreign MediaWiki installation. They are optional, and will be ignored
375 * for local repositories:
376 * - descBaseUrl URL of image description pages, e.g. http://en.wikipedia.org/wiki/File:
377 * - scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g.
378 * http://en.wikipedia.org/w
379 * - scriptExtension Script extension of the MediaWiki installation, equivalent to
380 * $wgScriptExtension, e.g. .php5 defaults to .php
382 * - articleUrl Equivalent to $wgArticlePath, e.g. http://en.wikipedia.org/wiki/$1
383 * - fetchDescription Fetch the text of the remote file description page. Equivalent to
384 * $wgFetchCommonsDescriptions.
387 * - dbType, dbServer, dbUser, dbPassword, dbName, dbFlags
388 * equivalent to the corresponding member of $wgDBservers
389 * - tablePrefix Table prefix, the foreign wiki's $wgDBprefix
390 * - hasSharedCache True if the wiki's shared cache is accessible via the local $wgMemc
393 * - apibase Use for the foreign API's URL
394 * - apiThumbCacheExpiry How long to locally cache thumbs for
396 * If you leave $wgLocalFileRepo set to false, Setup will fill in appropriate values.
397 * Otherwise, set $wgLocalFileRepo to a repository structure as described above.
398 * If you set $wgUseInstantCommons to true, it will add an entry for Commons.
399 * If you set $wgForeignFileRepos to an array of repostory structures, those will
400 * be searched after the local file repo.
401 * Otherwise, you will only have access to local media files.
403 * @see Setup.php for an example usage and default initialization.
405 $wgLocalFileRepo = false;
407 /** @see $wgLocalFileRepo */
408 $wgForeignFileRepos = array();
411 * Use Commons as a remote file repository. Essentially a wrapper, when this
412 * is enabled $wgForeignFileRepos will point at Commons with a set of default
415 $wgUseInstantCommons = false;
418 * File backend structure configuration.
419 * This is an array of file backend configuration arrays.
420 * Each backend configuration has the following parameters:
421 * 'name' : A unique name for the backend
422 * 'class' : The file backend class to use
423 * 'wikiId' : A unique string that identifies the wiki (container prefix)
424 * 'lockManager' : The name of a lock manager (see $wgLockManagers)
425 * Additional parameters are specific to the class used.
427 $wgFileBackends = array();
430 * Array of configuration arrays for each lock manager.
431 * Each backend configuration has the following parameters:
432 * 'name' : A unique name for the lock manger
433 * 'class' : The lock manger class to use
434 * Additional parameters are specific to the class used.
436 $wgLockManagers = array();
439 * Show EXIF data, on by default if available.
440 * Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php
442 * NOTE FOR WINDOWS USERS:
443 * To enable EXIF functions, add the following lines to the
444 * "Windows extensions" section of php.ini:
446 * extension=extensions/php_mbstring.dll
447 * extension=extensions/php_exif.dll
449 $wgShowEXIF = function_exists( 'exif_read_data' );
452 * If to automatically update the img_metadata field
453 * if the metadata field is outdated but compatible with the current version.
456 $wgUpdateCompatibleMetadata = false;
459 * If you operate multiple wikis, you can define a shared upload path here.
460 * Uploads to this wiki will NOT be put there - they will be put into
461 * $wgUploadDirectory.
462 * If $wgUseSharedUploads is set, the wiki will look in the shared repository if
463 * no file of the given name is found in the local repository (for [[File:..]],
464 * [[Media:..]] links). Thumbnails will also be looked for and generated in this
467 * Note that these configuration settings can now be defined on a per-
468 * repository basis for an arbitrary number of file repositories, using the
469 * $wgForeignFileRepos variable.
471 $wgUseSharedUploads = false;
473 /** Full path on the web server where shared uploads can be found */
474 $wgSharedUploadPath = "http://commons.wikimedia.org/shared/images";
476 /** Fetch commons image description pages and display them on the local wiki? */
477 $wgFetchCommonsDescriptions = false;
479 /** Path on the file system where shared uploads can be found. */
480 $wgSharedUploadDirectory = "/var/www/wiki3/images";
482 /** DB name with metadata about shared directory. Set this to false if the uploads do not come from a wiki. */
483 $wgSharedUploadDBname = false;
485 /** Optional table prefix used in database. */
486 $wgSharedUploadDBprefix = '';
488 /** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */
489 $wgCacheSharedUploads = true;
492 * Allow for upload to be copied from an URL. Requires Special:Upload?source=web
493 * The timeout for copy uploads is set by $wgHTTPTimeout.
494 * You have to assign the user right 'upload_by_url' to a user group, to use this.
496 $wgAllowCopyUploads = false;
499 * Allow asynchronous copy uploads.
500 * This feature is experimental and broken as of r81612.
502 $wgAllowAsyncCopyUploads = false;
505 * A list of domains copy uploads can come from
507 $wgCopyUploadsDomains = array();
510 * Max size for uploads, in bytes. If not set to an array, applies to all
511 * uploads. If set to an array, per upload type maximums can be set, using the
512 * file and url keys. If the * key is set this value will be used as maximum
513 * for non-specified types.
516 * $wgMaxUploadSize = array(
518 * 'url' => 500 * 1024,
520 * Sets the maximum for all uploads to 250 kB except for upload-by-url, which
521 * will have a maximum of 500 kB.
524 $wgMaxUploadSize = 1024*1024*100; # 100MB
527 * Point the upload navigation link to an external URL
528 * Useful if you want to use a shared repository by default
529 * without disabling local uploads (use $wgEnableUploads = false for that)
530 * e.g. $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
532 $wgUploadNavigationUrl = false;
535 * Point the upload link for missing files to an external URL, as with
536 * $wgUploadNavigationUrl. The URL will get "(?|&)wpDestFile=<filename>"
537 * appended to it as appropriate.
539 $wgUploadMissingFileUrl = false;
542 * Give a path here to use thumb.php for thumbnail generation on client request, instead of
543 * generating them on render and outputting a static URL. This is necessary if some of your
544 * apache servers don't have read/write access to the thumbnail path.
547 * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb{$wgScriptExtension}";
549 $wgThumbnailScriptPath = false;
550 $wgSharedThumbnailScriptPath = false;
553 * Set this to false if you do not want MediaWiki to divide your images
554 * directory into many subdirectories, for improved performance.
556 * It's almost always good to leave this enabled. In previous versions of
557 * MediaWiki, some users set this to false to allow images to be added to the
558 * wiki by simply copying them into $wgUploadDirectory and then running
559 * maintenance/rebuildImages.php to register them in the database. This is no
560 * longer recommended, use maintenance/importImages.php instead.
562 * Note that this variable may be ignored if $wgLocalFileRepo is set.
564 $wgHashedUploadDirectory = true;
567 * Set the following to false especially if you have a set of files that need to
568 * be accessible by all wikis, and you do not want to use the hash (path/a/aa/)
571 $wgHashedSharedUploadDirectory = true;
574 * Base URL for a repository wiki. Leave this blank if uploads are just stored
575 * in a shared directory and not meant to be accessible through a separate wiki.
576 * Otherwise the image description pages on the local wiki will link to the
577 * image description page on this wiki.
579 * Please specify the namespace, as in the example below.
581 $wgRepositoryBaseUrl = "http://commons.wikimedia.org/wiki/File:";
584 * This is the list of preferred extensions for uploading files. Uploading files
585 * with extensions not in this list will trigger a warning.
587 * WARNING: If you add any OpenOffice or Microsoft Office file formats here,
588 * such as odt or doc, and untrusted users are allowed to upload files, then
589 * your wiki will be vulnerable to cross-site request forgery (CSRF).
591 $wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg' );
593 /** Files with these extensions will never be allowed as uploads. */
594 $wgFileBlacklist = array(
595 # HTML may contain cookie-stealing JavaScript and web bugs
596 'html', 'htm', 'js', 'jsb', 'mhtml', 'mht', 'xhtml', 'xht',
597 # PHP scripts may execute arbitrary code on the server
598 'php', 'phtml', 'php3', 'php4', 'php5', 'phps',
599 # Other types that may be interpreted by some servers
600 'shtml', 'jhtml', 'pl', 'py', 'cgi',
601 # May contain harmful executables for Windows victims
602 'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' );
605 * Files with these mime types will never be allowed as uploads
606 * if $wgVerifyMimeType is enabled.
608 $wgMimeTypeBlacklist = array(
609 # HTML may contain cookie-stealing JavaScript and web bugs
610 'text/html', 'text/javascript', 'text/x-javascript', 'application/x-shellscript',
611 # PHP scripts may execute arbitrary code on the server
612 'application/x-php', 'text/x-php',
613 # Other types that may be interpreted by some servers
614 'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh',
615 # Client-side hazards on Internet Explorer
616 'text/scriptlet', 'application/x-msdownload',
617 # Windows metafile, client-side vulnerability on some systems
618 'application/x-msmetafile',
622 * Allow Java archive uploads.
623 * This is not recommended for public wikis since a maliciously-constructed
624 * applet running on the same domain as the wiki can steal the user's cookies.
626 $wgAllowJavaUploads = false;
629 * This is a flag to determine whether or not to check file extensions on upload.
631 * WARNING: setting this to false is insecure for public wikis.
633 $wgCheckFileExtensions = true;
636 * If this is turned off, users may override the warning for files not covered
637 * by $wgFileExtensions.
639 * WARNING: setting this to false is insecure for public wikis.
641 $wgStrictFileExtensions = true;
644 * Setting this to true will disable the upload system's checks for HTML/JavaScript.
645 * THIS IS VERY DANGEROUS on a publicly editable site, so USE wgGroupPermissions
646 * TO RESTRICT UPLOADING to only those that you trust
648 $wgDisableUploadScriptChecks = false;
650 /** Warn if uploaded files are larger than this (in bytes), or false to disable*/
651 $wgUploadSizeWarning = false;
654 * list of trusted media-types and mime types.
655 * Use the MEDIATYPE_xxx constants to represent media types.
656 * This list is used by File::isSafeFile
658 * Types not listed here will have a warning about unsafe content
659 * displayed on the images description page. It would also be possible
660 * to use this for further restrictions, like disabling direct
661 * [[media:...]] links for non-trusted formats.
663 $wgTrustedMediaFormats = array(
664 MEDIATYPE_BITMAP
, //all bitmap formats
665 MEDIATYPE_AUDIO
, //all audio formats
666 MEDIATYPE_VIDEO
, //all plain video formats
667 "image/svg+xml", //svg (only needed if inline rendering of svg is not supported)
668 "application/pdf", //PDF files
669 #"application/x-shockwave-flash", //flash/shockwave movie
673 * Plugins for media file type handling.
674 * Each entry in the array maps a MIME type to a class name
676 $wgMediaHandlers = array(
677 'image/jpeg' => 'JpegHandler',
678 'image/png' => 'PNGHandler',
679 'image/gif' => 'GIFHandler',
680 'image/tiff' => 'TiffHandler',
681 'image/x-ms-bmp' => 'BmpHandler',
682 'image/x-bmp' => 'BmpHandler',
683 'image/x-xcf' => 'XCFHandler',
684 'image/svg+xml' => 'SvgHandler', // official
685 'image/svg' => 'SvgHandler', // compat
686 'image/vnd.djvu' => 'DjVuHandler', // official
687 'image/x.djvu' => 'DjVuHandler', // compat
688 'image/x-djvu' => 'DjVuHandler', // compat
692 * Resizing can be done using PHP's internal image libraries or using
693 * ImageMagick or another third-party converter, e.g. GraphicMagick.
694 * These support more file formats than PHP, which only supports PNG,
695 * GIF, JPG, XBM and WBMP.
697 * Use Image Magick instead of PHP builtin functions.
699 $wgUseImageMagick = false;
700 /** The convert command shipped with ImageMagick */
701 $wgImageMagickConvertCommand = '/usr/bin/convert';
702 /** The identify command shipped with ImageMagick */
703 $wgImageMagickIdentifyCommand = '/usr/bin/identify';
705 /** Sharpening parameter to ImageMagick */
706 $wgSharpenParameter = '0x0.4';
708 /** Reduction in linear dimensions below which sharpening will be enabled */
709 $wgSharpenReductionThreshold = 0.85;
712 * Temporary directory used for ImageMagick. The directory must exist. Leave
713 * this set to false to let ImageMagick decide for itself.
715 $wgImageMagickTempDir = false;
718 * Use another resizing converter, e.g. GraphicMagick
719 * %s will be replaced with the source path, %d with the destination
720 * %w and %h will be replaced with the width and height.
722 * Example for GraphicMagick:
724 * $wgCustomConvertCommand = "gm convert %s -resize %wx%h %d"
727 * Leave as false to skip this.
729 $wgCustomConvertCommand = false;
732 * Some tests and extensions use exiv2 to manipulate the EXIF metadata in some image formats.
734 $wgExiv2Command = '/usr/bin/exiv2';
737 * Scalable Vector Graphics (SVG) may be uploaded as images.
738 * Since SVG support is not yet standard in browsers, it is
739 * necessary to rasterize SVGs to PNG as a fallback format.
741 * An external program is required to perform this conversion.
742 * If set to an array, the first item is a PHP callable and any further items
743 * are passed as parameters after $srcPath, $dstPath, $width, $height
745 $wgSVGConverters = array(
746 'ImageMagick' => '$path/convert -background white -thumbnail $widthx$height\! $input PNG:$output',
747 'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
748 'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
749 'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input',
750 'rsvg' => '$path/rsvg -w$width -h$height $input $output',
751 'imgserv' => '$path/imgserv-wrapper -i svg -o png -w$width $input $output',
752 'ImagickExt' => array( 'SvgHandler::rasterizeImagickExt' ),
755 /** Pick a converter defined in $wgSVGConverters */
756 $wgSVGConverter = 'ImageMagick';
758 /** If not in the executable PATH, specify the SVG converter path. */
759 $wgSVGConverterPath = '';
761 /** Don't scale a SVG larger than this */
762 $wgSVGMaxSize = 2048;
764 /** Don't read SVG metadata beyond this point.
765 * Default is 1024*256 bytes
767 $wgSVGMetadataCutoff = 262144;
770 * MediaWiki will reject HTMLesque tags in uploaded files due to idiotic browsers which can't
771 * perform basic stuff like MIME detection and which are vulnerable to further idiots uploading
772 * crap files as images. When this directive is on, "<title>" will be allowed in files with
773 * an "image/svg+xml" MIME type. You should leave this disabled if your web server is misconfigured
774 * and doesn't send appropriate MIME types for SVG images.
776 $wgAllowTitlesInSVG = false;
779 * The maximum number of pixels a source image can have if it is to be scaled
780 * down by a scaler that requires the full source image to be decompressed
781 * and stored in decompressed form, before the thumbnail is generated.
783 * This provides a limit on memory usage for the decompression side of the
784 * image scaler. The limit is used when scaling PNGs with any of the
785 * built-in image scalers, such as ImageMagick or GD. It is ignored for
786 * JPEGs with ImageMagick, and when using the VipsScaler extension.
788 * The default is 50 MB if decompressed to RGBA form, which corresponds to
789 * 12.5 million pixels or 3500x3500.
791 $wgMaxImageArea = 1.25e7
;
793 * Force thumbnailing of animated GIFs above this size to a single
794 * frame instead of an animated thumbnail. As of MW 1.17 this limit
795 * is checked against the total size of all frames in the animation.
796 * It probably makes sense to keep this equal to $wgMaxImageArea.
798 $wgMaxAnimatedGifArea = 1.25e7
;
800 * Browsers don't support TIFF inline generally...
801 * For inline display, we need to convert to PNG or JPEG.
802 * Note scaling should work with ImageMagick, but may not with GD scaling.
806 * // PNG is lossless, but inefficient for photos
807 * $wgTiffThumbnailType = array( 'png', 'image/png' );
808 * // JPEG is good for photos, but has no transparency support. Bad for diagrams.
809 * $wgTiffThumbnailType = array( 'jpg', 'image/jpeg' );
812 $wgTiffThumbnailType = false;
815 * If rendered thumbnail files are older than this timestamp, they
816 * will be rerendered on demand as if the file didn't already exist.
817 * Update if there is some need to force thumbs and SVG rasterizations
818 * to rerender, such as fixes to rendering bugs.
820 $wgThumbnailEpoch = '20030516000000';
823 * If set, inline scaled images will still produce "<img>" tags ready for
824 * output instead of showing an error message.
826 * This may be useful if errors are transitory, especially if the site
827 * is configured to automatically render thumbnails on request.
829 * On the other hand, it may obscure error conditions from debugging.
830 * Enable the debug log or the 'thumbnail' log group to make sure errors
831 * are logged to a file for review.
833 $wgIgnoreImageErrors = false;
836 * Allow thumbnail rendering on page view. If this is false, a valid
837 * thumbnail URL is still output, but no file will be created at
838 * the target location. This may save some time if you have a
839 * thumb.php or 404 handler set up which is faster than the regular
842 $wgGenerateThumbnailOnParse = true;
845 * Show thumbnails for old images on the image description page
847 $wgShowArchiveThumbnails = true;
849 /** Obsolete, always true, kept for compatibility with extensions */
850 $wgUseImageResize = true;
853 * If set to true, images that contain certain the exif orientation tag will
854 * be rotated accordingly. If set to null, try to auto-detect whether a scaler
855 * is available that can rotate.
857 $wgEnableAutoRotation = null;
860 * Internal name of virus scanner. This servers as a key to the
861 * $wgAntivirusSetup array. Set this to NULL to disable virus scanning. If not
862 * null, every file uploaded will be scanned for viruses.
867 * Configuration for different virus scanners. This an associative array of
868 * associative arrays. It contains one setup array per known scanner type.
869 * The entry is selected by $wgAntivirus, i.e.
870 * valid values for $wgAntivirus are the keys defined in this array.
872 * The configuration array for each scanner contains the following keys:
873 * "command", "codemap", "messagepattern":
875 * "command" is the full command to call the virus scanner - %f will be
876 * replaced with the name of the file to scan. If not present, the filename
877 * will be appended to the command. Note that this must be overwritten if the
878 * scanner is not in the system path; in that case, plase set
879 * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full
882 * "codemap" is a mapping of exit code to return codes of the detectVirus
883 * function in SpecialUpload.
884 * - An exit code mapped to AV_SCAN_FAILED causes the function to consider
885 * the scan to be failed. This will pass the file if $wgAntivirusRequired
887 * - An exit code mapped to AV_SCAN_ABORTED causes the function to consider
888 * the file to have an usupported format, which is probably imune to
889 * virusses. This causes the file to pass.
890 * - An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning
891 * no virus was found.
892 * - All other codes (like AV_VIRUS_FOUND) will cause the function to report
894 * - You may use "*" as a key in the array to catch all exit codes not mapped otherwise.
896 * "messagepattern" is a perl regular expression to extract the meaningful part of the scanners
897 * output. The relevant part should be matched as group one (\1).
898 * If not defined or the pattern does not match, the full message is shown to the user.
900 $wgAntivirusSetup = array(
904 'command' => "clamscan --no-summary ",
907 "0" => AV_NO_VIRUS
, # no virus
908 "1" => AV_VIRUS_FOUND
, # virus found
909 "52" => AV_SCAN_ABORTED
, # unsupported file format (probably imune)
910 "*" => AV_SCAN_FAILED
, # else scan failed
913 'messagepattern' => '/.*?:(.*)/sim',
918 /** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected. */
919 $wgAntivirusRequired = true;
921 /** Determines if the mime type of uploaded files should be checked */
922 $wgVerifyMimeType = true;
924 /** Sets the mime type definition file to use by MimeMagic.php. */
925 $wgMimeTypeFile = "includes/mime.types";
926 #$wgMimeTypeFile= "/etc/mime.types";
927 #$wgMimeTypeFile= null; #use built-in defaults only.
929 /** Sets the mime type info file to use by MimeMagic.php. */
930 $wgMimeInfoFile= "includes/mime.info";
931 #$wgMimeInfoFile= null; #use built-in defaults only.
934 * Switch for loading the FileInfo extension by PECL at runtime.
935 * This should be used only if fileinfo is installed as a shared object
936 * or a dynamic library.
938 $wgLoadFileinfoExtension = false;
940 /** Sets an external mime detector program. The command must print only
941 * the mime type to standard output.
942 * The name of the file to process will be appended to the command given here.
943 * If not set or NULL, mime_content_type will be used if available.
946 * #$wgMimeDetectorCommand = "file -bi"; # use external mime detector (Linux)
949 $wgMimeDetectorCommand = null;
952 * Switch for trivial mime detection. Used by thumb.php to disable all fancy
953 * things, because only a few types of images are needed and file extensions
956 $wgTrivialMimeDetection = false;
959 * Additional XML types we can allow via mime-detection.
960 * array = ( 'rootElement' => 'associatedMimeType' )
962 $wgXMLMimeTypes = array(
963 'http://www.w3.org/2000/svg:svg' => 'image/svg+xml',
964 'svg' => 'image/svg+xml',
965 'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram',
966 'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml?
967 'html' => 'text/html', // application/xhtml+xml?
971 * Limit images on image description pages to a user-selectable limit. In order
972 * to reduce disk usage, limits can only be selected from a list.
973 * The user preference is saved as an array offset in the database, by default
974 * the offset is set with $wgDefaultUserOptions['imagesize']. Make sure you
975 * change it if you alter the array (see bug 8858).
976 * This is the list of settings the user can choose from:
978 $wgImageLimits = array(
987 * Adjust thumbnails on image pages according to a user setting. In order to
988 * reduce disk usage, the values can only be selected from a list. This is the
989 * list of settings the user can choose from:
991 $wgThumbLimits = array(
1001 * Default parameters for the "<gallery>" tag
1003 $wgGalleryOptions = array (
1004 'imagesPerRow' => 0, // Default number of images per-row in the gallery. 0 -> Adapt to screensize
1005 'imageWidth' => 120, // Width of the cells containing images in galleries (in "px")
1006 'imageHeight' => 120, // Height of the cells containing images in galleries (in "px")
1007 'captionLength' => 25, // Length of caption to truncate (in characters)
1008 'showBytes' => true, // Show the filesize in bytes in categories
1012 * Adjust width of upright images when parameter 'upright' is used
1013 * This allows a nicer look for upright images without the need to fix the width
1014 * by hardcoded px in wiki sourcecode.
1016 $wgThumbUpright = 0.75;
1019 * Default value for chmoding of new directories.
1021 $wgDirectoryMode = 0777;
1025 * Path of the djvudump executable
1026 * Enable this and $wgDjvuRenderer to enable djvu rendering
1028 # $wgDjvuDump = 'djvudump';
1032 * Path of the ddjvu DJVU renderer
1033 * Enable this and $wgDjvuDump to enable djvu rendering
1035 # $wgDjvuRenderer = 'ddjvu';
1036 $wgDjvuRenderer = null;
1039 * Path of the djvutxt DJVU text extraction utility
1040 * Enable this and $wgDjvuDump to enable text layer extraction from djvu files
1042 # $wgDjvuTxt = 'djvutxt';
1046 * Path of the djvutoxml executable
1047 * This works like djvudump except much, much slower as of version 3.5.
1049 * For now I recommend you use djvudump instead. The djvuxml output is
1050 * probably more stable, so we'll switch back to it as soon as they fix
1051 * the efficiency problem.
1052 * http://sourceforge.net/tracker/index.php?func=detail&aid=1704049&group_id=32953&atid=406583
1054 # $wgDjvuToXML = 'djvutoxml';
1055 $wgDjvuToXML = null;
1059 * Shell command for the DJVU post processor
1060 * Default: pnmtopng, since ddjvu generates ppm output
1061 * Set this to false to output the ppm file directly.
1063 $wgDjvuPostProcessor = 'pnmtojpeg';
1065 * File extension for the DJVU post processor output
1067 $wgDjvuOutputExtension = 'jpg';
1069 /** @} */ # end of file uploads }
1071 /************************************************************************//**
1072 * @name Email settings
1076 $serverName = substr( $wgServer, strrpos( $wgServer, '/' ) +
1 );
1079 * Site admin email address.
1081 $wgEmergencyContact = 'wikiadmin@' . $serverName;
1084 * Password reminder email address.
1086 * The address we should use as sender when a user is requesting his password.
1088 $wgPasswordSender = 'apache@' . $serverName;
1090 unset( $serverName ); # Don't leak local variables to global scope
1093 * Password reminder name
1095 $wgPasswordSenderName = 'MediaWiki Mail';
1098 * Dummy address which should be accepted during mail send action.
1099 * It might be necessary to adapt the address or to set it equal
1100 * to the $wgEmergencyContact address.
1102 $wgNoReplyAddress = 'reply@not.possible';
1105 * Set to true to enable the e-mail basic features:
1106 * Password reminders, etc. If sending e-mail on your
1107 * server doesn't work, you might want to disable this.
1109 $wgEnableEmail = true;
1112 * Set to true to enable user-to-user e-mail.
1113 * This can potentially be abused, as it's hard to track.
1115 $wgEnableUserEmail = true;
1118 * Set to true to put the sending user's email in a Reply-To header
1119 * instead of From. ($wgEmergencyContact will be used as From.)
1121 * Some mailers (eg sSMTP) set the SMTP envelope sender to the From value,
1122 * which can cause problems with SPF validation and leak recipient addressses
1123 * when bounces are sent to the sender.
1125 $wgUserEmailUseReplyTo = false;
1128 * Minimum time, in hours, which must elapse between password reminder
1129 * emails for a given account. This is to prevent abuse by mail flooding.
1131 $wgPasswordReminderResendTime = 24;
1134 * The time, in seconds, when an emailed temporary password expires.
1136 $wgNewPasswordExpiry = 3600 * 24 * 7;
1139 * The time, in seconds, when an email confirmation email expires
1141 $wgUserEmailConfirmationTokenExpiry = 7 * 24 * 60 * 60;
1145 * For using a direct (authenticated) SMTP server connection.
1146 * Default to false or fill an array :
1148 * "host" => 'SMTP domain',
1149 * "IDHost" => 'domain for MessageID',
1151 * "auth" => true/false,
1152 * "username" => user,
1153 * "password" => password
1159 * Additional email parameters, will be passed as the last argument to mail() call.
1160 * If using safe_mode this has no effect
1162 $wgAdditionalMailParams = null;
1165 * True: from page editor if s/he opted-in. False: Enotif mails appear to come
1166 * from $wgEmergencyContact
1168 $wgEnotifFromEditor = false;
1170 // TODO move UPO to preferences probably ?
1171 # If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion
1172 # If set to false, the corresponding input form on the user preference page is suppressed
1173 # It call this to be a "user-preferences-option (UPO)"
1176 * Require email authentication before sending mail to an email addres. This is
1177 * highly recommended. It prevents MediaWiki from being used as an open spam
1180 $wgEmailAuthentication = true;
1183 * Allow users to enable email notification ("enotif") on watchlist changes.
1185 $wgEnotifWatchlist = false;
1188 * Allow users to enable email notification ("enotif") when someone edits their
1191 $wgEnotifUserTalk = false;
1194 * Set the Reply-to address in notifications to the editor's address, if user
1195 * allowed this in the preferences.
1197 $wgEnotifRevealEditorAddress = false;
1200 * Send notification mails on minor edits to watchlist pages. This is enabled
1201 * by default. Does not affect user talk notifications.
1203 $wgEnotifMinorEdits = true;
1206 * Send a generic mail instead of a personalised mail for each user. This
1207 * always uses UTC as the time zone, and doesn't include the username.
1209 * For pages with many users watching, this can significantly reduce mail load.
1210 * Has no effect when using sendmail rather than SMTP.
1212 $wgEnotifImpersonal = false;
1215 * Maximum number of users to mail at once when using impersonal mail. Should
1216 * match the limit on your mail server.
1218 $wgEnotifMaxRecips = 500;
1221 * Send mails via the job queue. This can be useful to reduce the time it
1222 * takes to save a page that a lot of people are watching.
1224 $wgEnotifUseJobQ = false;
1227 * Use real name instead of username in e-mail "from" field.
1229 $wgEnotifUseRealName = false;
1232 * Array of usernames who will be sent a notification email for every change
1233 * which occurs on a wiki. Users will not be notified of their own changes.
1235 $wgUsersNotifiedOnAllChanges = array();
1238 /** @} */ # end of email settings
1240 /************************************************************************//**
1241 * @name Database settings
1244 /** Database host name or IP address */
1245 $wgDBserver = 'localhost';
1246 /** Database port number (for PostgreSQL) */
1248 /** Name of the database */
1249 $wgDBname = 'my_wiki';
1250 /** Database username */
1251 $wgDBuser = 'wikiuser';
1252 /** Database user's password */
1254 /** Database type */
1255 $wgDBtype = 'mysql';
1257 /** Separate username for maintenance tasks. Leave as null to use the default. */
1258 $wgDBadminuser = null;
1259 /** Separate password for maintenance tasks. Leave as null to use the default. */
1260 $wgDBadminpassword = null;
1264 * Leave as null to select the default search engine for the
1265 * selected database type (eg SearchMySQL), or set to a class
1266 * name to override to a custom search engine.
1268 $wgSearchType = null;
1270 /** Table name prefix */
1272 /** MySQL table options to use during installation or update */
1273 $wgDBTableOptions = 'ENGINE=InnoDB';
1276 * SQL Mode - default is turning off all modes, including strict, if set.
1277 * null can be used to skip the setting for performance reasons and assume
1278 * DBA has done his best job.
1279 * String override can be used for some additional fun :-)
1283 /** Mediawiki schema */
1284 $wgDBmwschema = 'mediawiki';
1286 /** To override default SQLite data directory ($docroot/../data) */
1287 $wgSQLiteDataDir = '';
1290 * Make all database connections secretly go to localhost. Fool the load balancer
1291 * thinking there is an arbitrarily large cluster of servers to connect to.
1292 * Useful for debugging.
1294 $wgAllDBsAreLocalhost = false;
1297 * Shared database for multiple wikis. Commonly used for storing a user table
1298 * for single sign-on. The server for this database must be the same as for the
1301 * For backwards compatibility the shared prefix is set to the same as the local
1302 * prefix, and the user table is listed in the default list of shared tables.
1303 * The user_properties table is also added so that users will continue to have their
1304 * preferences shared (preferences were stored in the user table prior to 1.16)
1306 * $wgSharedTables may be customized with a list of tables to share in the shared
1307 * datbase. However it is advised to limit what tables you do share as many of
1308 * MediaWiki's tables may have side effects if you try to share them.
1311 * $wgSharedPrefix is the table prefix for the shared database. It defaults to
1316 /** @see $wgSharedDB */
1317 $wgSharedPrefix = false;
1318 /** @see $wgSharedDB */
1319 $wgSharedTables = array( 'user', 'user_properties' );
1322 * Database load balancer
1323 * This is a two-dimensional array, an array of server info structures
1326 * - dbname: Default database name
1328 * - password: DB password
1329 * - type: "mysql" or "postgres"
1330 * - load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
1331 * - groupLoads: array of load ratios, the key is the query group name. A query may belong
1332 * to several groups, the most specific group defined here is used.
1334 * - flags: bit field
1335 * - DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
1336 * - DBO_DEBUG -- equivalent of $wgDebugDumpSql
1337 * - DBO_TRX -- wrap entire request in a transaction
1338 * - DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
1339 * - DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
1340 * - DBO_PERSISTENT -- enables persistent database connections
1342 * - max lag: (optional) Maximum replication lag before a slave will taken out of rotation
1343 * - max threads: (optional) Maximum number of running threads
1345 * These and any other user-defined properties will be assigned to the mLBInfo member
1346 * variable of the Database object.
1348 * Leave at false to use the single-server variables above. If you set this
1349 * variable, the single-server variables will generally be ignored (except
1350 * perhaps in some command-line scripts).
1352 * The first server listed in this array (with key 0) will be the master. The
1353 * rest of the servers will be slaves. To prevent writes to your slaves due to
1354 * accidental misconfiguration or MediaWiki bugs, set read_only=1 on all your
1355 * slaves in my.cnf. You can set read_only mode at runtime using:
1358 * SET @@read_only=1;
1361 * Since the effect of writing to a slave is so damaging and difficult to clean
1362 * up, we at Wikimedia set read_only=1 in my.cnf on all our DB servers, even
1363 * our masters, and then set read_only=0 on masters at runtime.
1365 $wgDBservers = false;
1368 * Load balancer factory configuration
1369 * To set up a multi-master wiki farm, set the class here to something that
1370 * can return a LoadBalancer with an appropriate master on a call to getMainLB().
1371 * The class identified here is responsible for reading $wgDBservers,
1372 * $wgDBserver, etc., so overriding it may cause those globals to be ignored.
1374 * The LBFactory_Multi class is provided for this purpose, please see
1375 * includes/db/LBFactory_Multi.php for configuration information.
1377 $wgLBFactoryConf = array( 'class' => 'LBFactory_Simple' );
1379 /** How long to wait for a slave to catch up to the master */
1380 $wgMasterWaitTimeout = 10;
1382 /** File to log database errors to */
1383 $wgDBerrorLog = false;
1385 * Override wiki timezone to UTC for wgDBerrorLog
1388 $wgDBerrorLogInUTC = false;
1390 /** When to give an error message */
1391 $wgDBClusterTimeout = 10;
1394 * Scale load balancer polling time so that under overload conditions, the database server
1395 * receives a SHOW STATUS query at an average interval of this many microseconds
1397 $wgDBAvgStatusPoll = 2000;
1400 * Set to true to engage MySQL 4.1/5.0 charset-related features;
1401 * for now will just cause sending of 'SET NAMES=utf8' on connect.
1403 * WARNING: THIS IS EXPERIMENTAL!
1405 * May break if you're not using the table defs from mysql5/tables.sql.
1406 * May break if you're upgrading an existing wiki if set differently.
1407 * Broken symptoms likely to include incorrect behavior with page titles,
1408 * usernames, comments etc containing non-ASCII characters.
1409 * Might also cause failures on the object cache and other things.
1411 * Even correct usage may cause failures with Unicode supplementary
1412 * characters (those not in the Basic Multilingual Plane) unless MySQL
1413 * has enhanced their Unicode support.
1415 $wgDBmysql5 = false;
1418 * Other wikis on this site, can be administered from a single developer
1420 * Array numeric key => database name
1422 $wgLocalDatabases = array();
1425 * If lag is higher than $wgSlaveLagWarning, show a warning in some special
1426 * pages (like watchlist). If the lag is higher than $wgSlaveLagCritical,
1427 * show a more obvious warning.
1429 $wgSlaveLagWarning = 10;
1430 /** @see $wgSlaveLagWarning */
1431 $wgSlaveLagCritical = 30;
1434 * Use old names for change_tags indices.
1436 $wgOldChangeTagsIndex = false;
1438 /**@}*/ # End of DB settings }
1441 /************************************************************************//**
1442 * @name Text storage
1447 * We can also compress text stored in the 'text' table. If this is set on, new
1448 * revisions will be compressed on page save if zlib support is available. Any
1449 * compressed revisions will be decompressed on load regardless of this setting
1450 * *but will not be readable at all* if zlib support is not available.
1452 $wgCompressRevisions = false;
1455 * External stores allow including content
1456 * from non database sources following URL links
1458 * Short names of ExternalStore classes may be specified in an array here:
1459 * $wgExternalStores = array("http","file","custom")...
1461 * CAUTION: Access to database might lead to code execution
1463 $wgExternalStores = false;
1466 * An array of external mysql servers, e.g.
1467 * $wgExternalServers = array( 'cluster1' => array( 'srv28', 'srv29', 'srv30' ) );
1468 * Used by LBFactory_Simple, may be ignored if $wgLBFactoryConf is set to another class.
1470 $wgExternalServers = array();
1473 * The place to put new revisions, false to put them in the local text table.
1474 * Part of a URL, e.g. DB://cluster1
1476 * Can be an array instead of a single string, to enable data distribution. Keys
1477 * must be consecutive integers, starting at zero. Example:
1479 * $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' );
1483 $wgDefaultExternalStore = false;
1486 * Revision text may be cached in $wgMemc to reduce load on external storage
1487 * servers and object extraction overhead for frequently-loaded revisions.
1489 * Set to 0 to disable, or number of seconds before cache expiry.
1491 $wgRevisionCacheExpiry = 0;
1493 /** @} */ # end text storage }
1495 /************************************************************************//**
1496 * @name Performance hacks and limits
1499 /** Disable database-intensive features */
1500 $wgMiserMode = false;
1501 /** Disable all query pages if miser mode is on, not just some */
1502 $wgDisableQueryPages = false;
1503 /** Number of rows to cache in 'querycache' table when miser mode is on */
1504 $wgQueryCacheLimit = 1000;
1505 /** Number of links to a page required before it is deemed "wanted" */
1506 $wgWantedPagesThreshold = 1;
1507 /** Enable slow parser functions */
1508 $wgAllowSlowParserFunctions = false;
1509 /** Allow schema updates */
1510 $wgAllowSchemaUpdates = true;
1513 * Do DELETE/INSERT for link updates instead of incremental
1515 $wgUseDumbLinkUpdate = false;
1518 * Anti-lock flags - bitfield
1519 * - ALF_PRELOAD_LINKS:
1520 * Preload links during link update for save
1521 * - ALF_PRELOAD_EXISTENCE:
1522 * Preload cur_id during replaceLinkHolders
1523 * - ALF_NO_LINK_LOCK:
1524 * Don't use locking reads when updating the link table. This is
1525 * necessary for wikis with a high edit rate for performance
1526 * reasons, but may cause link table inconsistency
1527 * - ALF_NO_BLOCK_LOCK:
1528 * As for ALF_LINK_LOCK, this flag is a necessity for high-traffic
1531 $wgAntiLockFlags = 0;
1534 * Maximum article size in kilobytes
1536 $wgMaxArticleSize = 2048;
1539 * The minimum amount of memory that MediaWiki "needs"; MediaWiki will try to
1540 * raise PHP's memory limit if it's below this amount.
1542 $wgMemoryLimit = "50M";
1544 /** @} */ # end performance hacks }
1546 /************************************************************************//**
1547 * @name Cache settings
1552 * Directory for caching data in the local filesystem. Should not be accessible
1553 * from the web. Set this to false to not use any local caches.
1555 * Note: if multiple wikis share the same localisation cache directory, they
1556 * must all have the same set of extensions. You can set a directory just for
1557 * the localisation cache using $wgLocalisationCacheConf['storeDirectory'].
1559 $wgCacheDirectory = false;
1562 * Main cache type. This should be a cache with fast access, but it may have
1563 * limited space. By default, it is disabled, since the database is not fast
1564 * enough to make it worthwhile.
1568 * - CACHE_ANYTHING: Use anything, as long as it works
1569 * - CACHE_NONE: Do not cache
1570 * - CACHE_DB: Store cache objects in the DB
1571 * - CACHE_MEMCACHED: MemCached, must specify servers in $wgMemCachedServers
1572 * - CACHE_ACCEL: APC, XCache or WinCache
1573 * - CACHE_DBA: Use PHP's DBA extension to store in a DBM-style
1574 * database. This is slow, and is not recommended for
1575 * anything other than debugging.
1576 * - (other): A string may be used which identifies a cache
1577 * configuration in $wgObjectCaches.
1579 * @see $wgMessageCacheType, $wgParserCacheType
1581 $wgMainCacheType = CACHE_NONE
;
1584 * The cache type for storing the contents of the MediaWiki namespace. This
1585 * cache is used for a small amount of data which is expensive to regenerate.
1587 * For available types see $wgMainCacheType.
1589 $wgMessageCacheType = CACHE_ANYTHING
;
1592 * The cache type for storing article HTML. This is used to store data which
1593 * is expensive to regenerate, and benefits from having plenty of storage space.
1595 * For available types see $wgMainCacheType.
1597 $wgParserCacheType = CACHE_ANYTHING
;
1600 * The cache type for storing language conversion tables,
1601 * which are used when parsing certain text and interface messages.
1603 * For available types see $wgMainCacheType.
1605 $wgLanguageConverterCacheType = CACHE_ANYTHING
;
1608 * Advanced object cache configuration.
1610 * Use this to define the class names and constructor parameters which are used
1611 * for the various cache types. Custom cache types may be defined here and
1612 * referenced from $wgMainCacheType, $wgMessageCacheType, $wgParserCacheType,
1613 * or $wgLanguageConverterCacheType.
1615 * The format is an associative array where the key is a cache identifier, and
1616 * the value is an associative array of parameters. The "class" parameter is the
1617 * class name which will be used. Alternatively, a "factory" parameter may be
1618 * given, giving a callable function which will generate a suitable cache object.
1620 * The other parameters are dependent on the class used.
1621 * - CACHE_DBA uses $wgTmpDirectory by default. The 'dir' parameter let you
1624 $wgObjectCaches = array(
1625 CACHE_NONE
=> array( 'class' => 'EmptyBagOStuff' ),
1626 CACHE_DB
=> array( 'class' => 'SqlBagOStuff', 'table' => 'objectcache' ),
1627 CACHE_DBA
=> array( 'class' => 'DBABagOStuff' ),
1629 CACHE_ANYTHING
=> array( 'factory' => 'ObjectCache::newAnything' ),
1630 CACHE_ACCEL
=> array( 'factory' => 'ObjectCache::newAccelerator' ),
1631 CACHE_MEMCACHED
=> array( 'factory' => 'ObjectCache::newMemcached' ),
1633 'apc' => array( 'class' => 'APCBagOStuff' ),
1634 'xcache' => array( 'class' => 'XCacheBagOStuff' ),
1635 'wincache' => array( 'class' => 'WinCacheBagOStuff' ),
1636 'memcached-php' => array( 'class' => 'MemcachedPhpBagOStuff' ),
1637 'memcached-pecl' => array( 'class' => 'MemcachedPeclBagOStuff' ),
1638 'hash' => array( 'class' => 'HashBagOStuff' ),
1642 * The expiry time for the parser cache, in seconds. The default is 86.4k
1643 * seconds, otherwise known as a day.
1645 $wgParserCacheExpireTime = 86400;
1648 * Select which DBA handler <http://www.php.net/manual/en/dba.requirements.php>
1649 * to use as CACHE_DBA backend.
1651 $wgDBAhandler = 'db3';
1654 * Store sessions in MemCached. This can be useful to improve performance, or to
1655 * avoid the locking behaviour of PHP's default session handler, which tends to
1656 * prevent multiple requests for the same user from acting concurrently.
1658 $wgSessionsInMemcached = false;
1661 * This is used for setting php's session.save_handler. In practice, you will
1662 * almost never need to change this ever. Other options might be 'user' or
1663 * 'session_mysql.' Setting to null skips setting this entirely (which might be
1664 * useful if you're doing cross-application sessions, see bug 11381)
1666 $wgSessionHandler = null;
1668 /** If enabled, will send MemCached debugging information to $wgDebugLogFile */
1669 $wgMemCachedDebug = false;
1671 /** The list of MemCached servers and port numbers */
1672 $wgMemCachedServers = array( '127.0.0.1:11000' );
1675 * Use persistent connections to MemCached, which are shared across multiple
1678 $wgMemCachedPersistent = false;
1681 * Read/write timeout for MemCached server communication, in microseconds.
1683 $wgMemCachedTimeout = 100000;
1686 * Set this to true to make a local copy of the message cache, for use in
1687 * addition to memcached. The files will be put in $wgCacheDirectory.
1689 $wgUseLocalMessageCache = false;
1692 * Defines format of local cache
1693 * true - Serialized object
1694 * false - PHP source file (Warning - security risk)
1696 $wgLocalMessageCacheSerialized = true;
1699 * Instead of caching everything, keep track which messages are requested and
1700 * load only most used messages. This only makes sense if there is lots of
1701 * interface messages customised in the wiki (like hundreds in many languages).
1703 $wgAdaptiveMessageCache = false;
1706 * Localisation cache configuration. Associative array with keys:
1707 * class: The class to use. May be overridden by extensions.
1709 * store: The location to store cache data. May be 'files', 'db' or
1710 * 'detect'. If set to "files", data will be in CDB files. If set
1711 * to "db", data will be stored to the database. If set to
1712 * "detect", files will be used if $wgCacheDirectory is set,
1713 * otherwise the database will be used.
1715 * storeClass: The class name for the underlying storage. If set to a class
1716 * name, it overrides the "store" setting.
1718 * storeDirectory: If the store class puts its data in files, this is the
1719 * directory it will use. If this is false, $wgCacheDirectory
1722 * manualRecache: Set this to true to disable cache updates on web requests.
1723 * Use maintenance/rebuildLocalisationCache.php instead.
1725 $wgLocalisationCacheConf = array(
1726 'class' => 'LocalisationCache',
1727 'store' => 'detect',
1728 'storeClass' => false,
1729 'storeDirectory' => false,
1730 'manualRecache' => false,
1733 /** Allow client-side caching of pages */
1734 $wgCachePages = true;
1737 * Set this to current time to invalidate all prior cached pages. Affects both
1738 * client- and server-side caching.
1739 * You can get the current date on your server by using the command:
1740 * date +%Y%m%d%H%M%S
1742 $wgCacheEpoch = '20030516000000';
1745 * Bump this number when changing the global style sheets and JavaScript.
1746 * It should be appended in the query string of static CSS and JS includes,
1747 * to ensure that client-side caches do not keep obsolete copies of global
1750 $wgStyleVersion = '303';
1753 * This will cache static pages for non-logged-in users to reduce
1754 * database traffic on public sites.
1755 * Must set $wgShowIPinHeader = false
1756 * ResourceLoader requests to default language and skins are cached
1757 * as well as single module requests.
1759 $wgUseFileCache = false;
1762 * Depth of the subdirectory hierarchy to be created under
1763 * $wgFileCacheDirectory. The subdirectories will be named based on
1764 * the MD5 hash of the title. A value of 0 means all cache files will
1765 * be put directly into the main file cache directory.
1767 $wgFileCacheDepth = 2;
1770 * Keep parsed pages in a cache (objectcache table or memcached)
1771 * to speed up output of the same page viewed by another user with the
1774 * This can provide a significant speedup for medium to large pages,
1775 * so you probably want to keep it on. Extensions that conflict with the
1776 * parser cache should disable the cache on a per-page basis instead.
1778 $wgEnableParserCache = true;
1781 * Append a configured value to the parser cache and the sitenotice key so
1782 * that they can be kept separate for some class of activity.
1784 $wgRenderHashAppend = '';
1787 * If on, the sidebar navigation links are cached for users with the
1788 * current language set. This can save a touch of load on a busy site
1789 * by shaving off extra message lookups.
1791 * However it is also fragile: changing the site configuration, or
1792 * having a variable $wgArticlePath, can produce broken links that
1793 * don't update as expected.
1795 $wgEnableSidebarCache = false;
1798 * Expiry time for the sidebar cache, in seconds
1800 $wgSidebarCacheExpiry = 86400;
1803 * When using the file cache, we can store the cached HTML gzipped to save disk
1804 * space. Pages will then also be served compressed to clients that support it.
1806 * Requires zlib support enabled in PHP.
1811 * Whether MediaWiki should send an ETag header. Seems to cause
1812 * broken behavior with Squid 2.6, see bug 7098.
1816 /** Clock skew or the one-second resolution of time() can occasionally cause cache
1817 * problems when the user requests two pages within a short period of time. This
1818 * variable adds a given number of seconds to vulnerable timestamps, thereby giving
1821 $wgClockSkewFudge = 5;
1824 * Invalidate various caches when LocalSettings.php changes. This is equivalent
1825 * to setting $wgCacheEpoch to the modification time of LocalSettings.php, as
1826 * was previously done in the default LocalSettings.php file.
1828 * On high-traffic wikis, this should be set to false, to avoid the need to
1829 * check the file modification time, and to avoid the performance impact of
1830 * unnecessary cache invalidations.
1832 $wgInvalidateCacheOnLocalSettingsChange = true;
1834 /** @} */ # end of cache settings
1836 /************************************************************************//**
1837 * @name HTTP proxy (Squid) settings
1839 * Many of these settings apply to any HTTP proxy used in front of MediaWiki,
1840 * although they are referred to as Squid settings for historical reasons.
1842 * Achieving a high hit ratio with an HTTP proxy requires special
1843 * configuration. See http://www.mediawiki.org/wiki/Manual:Squid_caching for
1850 * Enable/disable Squid.
1851 * See http://www.mediawiki.org/wiki/Manual:Squid_caching
1853 $wgUseSquid = false;
1855 /** If you run Squid3 with ESI support, enable this (default:false): */
1858 /** Send X-Vary-Options header for better caching (requires patched Squid) */
1861 /** Add X-Forwarded-Proto to the Vary and X-Vary-Options headers for API
1862 * requests and RSS/Atom feeds. Use this if you have an SSL termination setup
1863 * and need to split the cache between HTTP and HTTPS for API requests,
1864 * feed requests and HTTP redirect responses in order to prevent cache
1865 * pollution. This does not affect 'normal' requests to index.php other than
1868 $wgVaryOnXFP = false;
1871 * Internal server name as known to Squid, if different. Example:
1873 * $wgInternalServer = 'http://yourinternal.tld:8000';
1876 $wgInternalServer = false;
1879 * Cache timeout for the squid, will be sent as s-maxage (without ESI) or
1880 * Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in
1881 * the Squid config. 18000 seconds = 5 hours, more cache hits with 2678400 = 31
1884 $wgSquidMaxage = 18000;
1887 * Default maximum age for raw CSS/JS accesses
1889 $wgForcedRawSMaxage = 300;
1892 * List of proxy servers to purge on changes; default port is 80. Use IP addresses.
1894 * When MediaWiki is running behind a proxy, it will trust X-Forwarded-For
1895 * headers sent/modified from these proxies when obtaining the remote IP address
1897 * For a list of trusted servers which *aren't* purged, see $wgSquidServersNoPurge.
1899 $wgSquidServers = array();
1902 * As above, except these servers aren't purged on page changes; use to set a
1903 * list of trusted proxies, etc.
1905 $wgSquidServersNoPurge = array();
1907 /** Maximum number of titles to purge in any one client operation */
1908 $wgMaxSquidPurgeTitles = 400;
1911 * Routing configuration for HTCP multicast purging. Add elements here to
1912 * enable HTCP and determine which purges are sent where. If set to an empty
1913 * array, HTCP is disabled.
1915 * Each key in this array is a regular expression to match against the purged
1916 * URL, or an empty string to match all URLs. The purged URL is matched against
1917 * the regexes in the order specified, and the first rule whose regex matches
1920 * Example configuration to send purges for upload.wikimedia.org to one
1921 * multicast group and all other purges to another:
1922 * $wgHTCPMulticastRouting = array(
1923 * '|^https?://upload\.wikimedia\.org|' => array(
1924 * 'host' => '239.128.0.113',
1928 * 'host' => '239.128.0.112',
1933 * @see $wgHTCPMulticastTTL
1935 $wgHTCPMulticastRouting = array();
1938 * HTCP multicast address. Set this to a multicast IP address to enable HTCP.
1940 * Note that MediaWiki uses the old non-RFC compliant HTCP format, which was
1941 * present in the earliest Squid implementations of the protocol.
1943 * This setting is DEPRECATED in favor of $wgHTCPMulticastRouting , and kept
1944 * for backwards compatibility only. If $wgHTCPMulticastRouting is set, this
1945 * setting is ignored. If $wgHTCPMulticastRouting is not set and this setting
1946 * is, it is used to populate $wgHTCPMulticastRouting.
1948 * @deprecated in favor of $wgHTCPMulticastRouting
1950 $wgHTCPMulticastAddress = false;
1953 * HTCP multicast port.
1954 * @deprecated in favor of $wgHTCPMulticastRouting
1955 * @see $wgHTCPMulticastAddress
1960 * HTCP multicast TTL.
1961 * @see $wgHTCPMulticastRouting
1963 $wgHTCPMulticastTTL = 1;
1965 /** Should forwarded Private IPs be accepted? */
1966 $wgUsePrivateIPs = false;
1968 /** @} */ # end of HTTP proxy settings
1970 /************************************************************************//**
1971 * @name Language, regional and character encoding settings
1975 /** Site language code, should be one of ./languages/Language(.*).php */
1976 $wgLanguageCode = 'en';
1979 * Some languages need different word forms, usually for different cases.
1980 * Used in Language::convertGrammar(). Example:
1983 * $wgGrammarForms['en']['genitive']['car'] = 'car\'s';
1986 $wgGrammarForms = array();
1988 /** Treat language links as magic connectors, not inline links */
1989 $wgInterwikiMagic = true;
1991 /** Hide interlanguage links from the sidebar */
1992 $wgHideInterlanguageLinks = false;
1994 /** List of language names or overrides for default names in Names.php */
1995 $wgExtraLanguageNames = array();
1998 * List of language codes that don't correspond to an actual language.
1999 * These codes are mostly leftoffs from renames, or other legacy things.
2000 * This array makes them not appear as a selectable language on the installer,
2001 * and excludes them when running the transstat.php script.
2003 $wgDummyLanguageCodes = array(
2006 'be-x-old' => 'be-tarask',
2010 'qqq' => 'qqq', # Used for message documentation.
2011 'qqx' => 'qqx', # Used for viewing message keys.
2014 'zh-classical' => 'lzh',
2015 'zh-min-nan' => 'nan',
2020 * Character set for use in the article edit box. Language-specific encodings
2023 * This historic feature is one of the first that was added by former MediaWiki
2024 * team leader Brion Vibber, and is used to support the Esperanto x-system.
2026 $wgEditEncoding = '';
2029 * Set this to true to replace Arabic presentation forms with their standard
2030 * forms in the U+0600-U+06FF block. This only works if $wgLanguageCode is
2033 * Note that pages with titles containing presentation forms will become
2034 * inaccessible, run maintenance/cleanupTitles.php to fix this.
2036 $wgFixArabicUnicode = true;
2039 * Set this to true to replace ZWJ-based chillu sequences in Malayalam text
2040 * with their Unicode 5.1 equivalents. This only works if $wgLanguageCode is
2041 * set to "ml". Note that some clients (even new clients as of 2010) do not
2042 * support these characters.
2044 * If you enable this on an existing wiki, run maintenance/cleanupTitles.php to
2045 * fix any ZWJ sequences in existing page titles.
2047 $wgFixMalayalamUnicode = true;
2050 * Set this to always convert certain Unicode sequences to modern ones
2051 * regardless of the content language. This has a small performance
2054 * See $wgFixArabicUnicode and $wgFixMalayalamUnicode for conversion
2059 $wgAllUnicodeFixes = false;
2062 * Set this to eg 'ISO-8859-1' to perform character set conversion when
2063 * loading old revisions not marked with "utf-8" flag. Use this when
2064 * converting a wiki from MediaWiki 1.4 or earlier to UTF-8 without the
2065 * burdensome mass conversion of old text data.
2067 * NOTE! This DOES NOT touch any fields other than old_text.Titles, comments,
2068 * user names, etc still must be converted en masse in the database before
2069 * continuing as a UTF-8 wiki.
2071 $wgLegacyEncoding = false;
2074 * Browser Blacklist for unicode non compliant browsers. Contains a list of
2075 * regexps : "/regexp/" matching problematic browsers. These browsers will
2076 * be served encoded unicode in the edit box instead of real unicode.
2078 $wgBrowserBlackList = array(
2080 * Netscape 2-4 detection
2081 * The minor version may contain strings such as "Gold" or "SGoldC-SGI"
2082 * Lots of non-netscape user agents have "compatible", so it's useful to check for that
2083 * with a negative assertion. The [UIN] identifier specifies the level of security
2084 * in a Netscape/Mozilla browser, checking for it rules out a number of fakers.
2085 * The language string is unreliable, it is missing on NS4 Mac.
2087 * Reference: http://www.psychedelix.com/agents/index.shtml
2089 '/^Mozilla\/2\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2090 '/^Mozilla\/3\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2091 '/^Mozilla\/4\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2094 * MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH>
2097 * - Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC)
2098 * - Mozilla/4.0 (compatible; MSIE 5.15; Mac_PowerPC)
2099 * - Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC)
2102 * @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864
2103 * @link http://en.wikipedia.org/wiki/Template%3AOS9
2105 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
2108 * Google wireless transcoder, seems to eat a lot of chars alive
2109 * http://it.wikipedia.org/w/index.php?title=Luciano_Ligabue&diff=prev&oldid=8857361
2111 '/^Mozilla\/4\.0 \(compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder;\)/'
2115 * If set to true, the MediaWiki 1.4 to 1.5 schema conversion will
2116 * create stub reference rows in the text table instead of copying
2117 * the full text of all current entries from 'cur' to 'text'.
2119 * This will speed up the conversion step for large sites, but
2120 * requires that the cur table be kept around for those revisions
2121 * to remain viewable.
2123 * maintenance/migrateCurStubs.php can be used to complete the
2124 * migration in the background once the wiki is back online.
2126 * This option affects the updaters *only*. Any present cur stub
2127 * revisions will be readable at runtime regardless of this setting.
2129 $wgLegacySchemaConversion = false;
2132 * Enable to allow rewriting dates in page text.
2133 * DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES.
2135 $wgUseDynamicDates = false;
2137 * Enable dates like 'May 12' instead of '12 May', this only takes effect if
2138 * the interface is set to English.
2140 $wgAmericanDates = false;
2142 * For Hindi and Arabic use local numerals instead of Western style (0-9)
2143 * numerals in interface.
2145 $wgTranslateNumerals = true;
2148 * Translation using MediaWiki: namespace.
2149 * Interface messages will be loaded from the database.
2151 $wgUseDatabaseMessages = true;
2154 * Expiry time for the message cache key
2156 $wgMsgCacheExpiry = 86400;
2159 * Maximum entry size in the message cache, in bytes
2161 $wgMaxMsgCacheEntrySize = 10000;
2163 /** Whether to enable language variant conversion. */
2164 $wgDisableLangConversion = false;
2166 /** Whether to enable language variant conversion for links. */
2167 $wgDisableTitleConversion = false;
2169 /** Whether to enable cononical language links in meta data. */
2170 $wgCanonicalLanguageLinks = true;
2172 /** Default variant code, if false, the default will be the language code */
2173 $wgDefaultLanguageVariant = false;
2176 * Disabled variants array of language variant conversion. Example:
2178 * $wgDisabledVariants[] = 'zh-mo';
2179 * $wgDisabledVariants[] = 'zh-my';
2185 * $wgDisabledVariants = array('zh-mo', 'zh-my');
2188 $wgDisabledVariants = array();
2191 * Like $wgArticlePath, but on multi-variant wikis, this provides a
2192 * path format that describes which parts of the URL contain the
2193 * language variant. For Example:
2195 * $wgLanguageCode = 'sr';
2196 * $wgVariantArticlePath = '/$2/$1';
2197 * $wgArticlePath = '/wiki/$1';
2199 * A link to /wiki/ would be redirected to /sr/Главна_страна
2201 * It is important that $wgArticlePath not overlap with possible values
2202 * of $wgVariantArticlePath.
2204 $wgVariantArticlePath = false;
2207 * Show a bar of language selection links in the user login and user
2208 * registration forms; edit the "loginlanguagelinks" message to
2211 $wgLoginLanguageSelector = false;
2214 * When translating messages with wfMsg(), it is not always clear what should
2215 * be considered UI messages and what should be content messages.
2217 * For example, for the English Wikipedia, there should be only one 'mainpage',
2218 * so when getting the link for 'mainpage', we should treat it as site content
2219 * and call wfMsgForContent(), but for rendering the text of the link, we call
2220 * wfMsg(). The code behaves this way by default. However, sites like the
2221 * Wikimedia Commons do offer different versions of 'mainpage' and the like for
2222 * different languages. This array provides a way to override the default
2223 * behavior. For example, to allow language-specific main page and community
2226 * $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' );
2228 $wgForceUIMsgAsContentMsg = array();
2231 * Fake out the timezone that the server thinks it's in. This will be used for
2232 * date display and not for what's stored in the DB. Leave to null to retain
2233 * your server's OS-based timezone value.
2235 * This variable is currently used only for signature formatting and for local
2236 * time/date parser variables ({{LOCALTIME}} etc.)
2238 * Timezones can be translated by editing MediaWiki messages of type
2239 * timezone-nameinlowercase like timezone-utc.
2243 * $wgLocaltimezone = 'GMT';
2244 * $wgLocaltimezone = 'PST8PDT';
2245 * $wgLocaltimezone = 'Europe/Sweden';
2246 * $wgLocaltimezone = 'CET';
2249 $wgLocaltimezone = null;
2252 * Set an offset from UTC in minutes to use for the default timezone setting
2253 * for anonymous users and new user accounts.
2255 * This setting is used for most date/time displays in the software, and is
2256 * overrideable in user preferences. It is *not* used for signature timestamps.
2258 * By default, this will be set to match $wgLocaltimezone.
2260 $wgLocalTZoffset = null;
2263 * If set to true, this will roll back a few bug fixes introduced in 1.19,
2264 * emulating the 1.18 behaviour, to avoid introducing bug 34832. In 1.19,
2265 * language variant conversion is disabled in interface messages. Setting this
2266 * to true re-enables it.
2268 * This variable should be removed (implicitly false) in 1.20 or earlier.
2270 $wgBug34832TransitionalRollback = true;
2273 /** @} */ # End of language/charset settings
2275 /*************************************************************************//**
2276 * @name Output format and skin settings
2280 /** The default Content-Type header. */
2281 $wgMimeType = 'text/html';
2284 * The content type used in script tags. This is mostly going to be ignored if
2285 * $wgHtml5 is true, at least for actual HTML output, since HTML5 doesn't
2286 * require a MIME type for JavaScript or CSS (those are the default script and
2289 $wgJsMimeType = 'text/javascript';
2292 * The HTML document type. Ignored if $wgHtml5 is true, since <!DOCTYPE html>
2293 * doesn't actually have a doctype part to put this variable's contents in.
2295 $wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN';
2298 * The URL of the document type declaration. Ignored if $wgHtml5 is true,
2299 * since HTML5 has no DTD, and <!DOCTYPE html> doesn't actually have a DTD part
2300 * to put this variable's contents in.
2302 $wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
2305 * The default xmlns attribute. Ignored if $wgHtml5 is true (or it's supposed
2306 * to be), since we don't currently support XHTML5, and in HTML5 (i.e., served
2307 * as text/html) the attribute has no effect, so why bother?
2309 $wgXhtmlDefaultNamespace = 'http://www.w3.org/1999/xhtml';
2312 * Should we output an HTML5 doctype? If false, use XHTML 1.0 Transitional
2313 * instead, and disable HTML5 features. This may eventually be removed and set
2314 * to always true. If it's true, a number of other settings will be irrelevant
2315 * and have no effect.
2320 * Defines the value of the version attribute in the <html> tag, if any.
2321 * This is ignored if $wgHtml5 is false. If $wgAllowRdfaAttributes and
2322 * $wgHtml5 are both true, and this evaluates to boolean false (like if it's
2323 * left at the default null value), it will be auto-initialized to the correct
2324 * value for RDFa+HTML5. As such, you should have no reason to ever actually
2325 * set this to anything.
2327 $wgHtml5Version = null;
2330 * Enabled RDFa attributes for use in wikitext.
2331 * NOTE: Interaction with HTML5 is somewhat underspecified.
2333 $wgAllowRdfaAttributes = false;
2336 * Enabled HTML5 microdata attributes for use in wikitext, if $wgHtml5 is also true.
2338 $wgAllowMicrodataAttributes = false;
2341 * Cleanup as much presentational html like valign -> css vertical-align as we can
2343 $wgCleanupPresentationalAttributes = true;
2346 * Should we try to make our HTML output well-formed XML? If set to false,
2347 * output will be a few bytes shorter, and the HTML will arguably be more
2348 * readable. If set to true, life will be much easier for the authors of
2349 * screen-scraping bots, and the HTML will arguably be more readable.
2351 * Setting this to false may omit quotation marks on some attributes, omit
2352 * slashes from some self-closing tags, omit some ending tags, etc., where
2353 * permitted by HTML5. Setting it to true will not guarantee that all pages
2354 * will be well-formed, although non-well-formed pages should be rare and it's
2355 * a bug if you find one. Conversely, setting it to false doesn't mean that
2356 * all XML-y constructs will be omitted, just that they might be.
2358 * Because of compatibility with screen-scraping bots, and because it's
2359 * controversial, this is currently left to true by default.
2361 $wgWellFormedXml = true;
2364 * Permit other namespaces in addition to the w3.org default.
2365 * Use the prefix for the key and the namespace for the value. For
2367 * $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg';
2368 * Normally we wouldn't have to define this in the root "<html>"
2369 * element, but IE needs it there in some circumstances.
2371 * This is ignored if $wgHtml5 is true, for the same reason as
2372 * $wgXhtmlDefaultNamespace.
2374 $wgXhtmlNamespaces = array();
2377 * Show IP address, for non-logged in users. It's necessary to switch this off
2378 * for some forms of caching.
2379 * Will disable file cache.
2381 $wgShowIPinHeader = true;
2384 * Site notice shown at the top of each page
2386 * MediaWiki:Sitenotice page, which will override this. You can also
2387 * provide a separate message for logged-out users using the
2388 * MediaWiki:Anonnotice page.
2393 * A subtitle to add to the tagline, for skins that have it/
2395 $wgExtraSubtitle = '';
2398 * If this is set, a "donate" link will appear in the sidebar. Set it to a URL.
2400 $wgSiteSupportPage = '';
2403 * Validate the overall output using tidy and refuse
2404 * to display the page if it's not valid.
2406 $wgValidateAllHtml = false;
2409 * Default skin, for new users and anonymous visitors. Registered users may
2410 * change this to any one of the other available skins in their preferences.
2411 * This has to be completely lowercase; see the "skins" directory for the list
2412 * of available skins.
2414 $wgDefaultSkin = 'vector';
2417 * Specify the name of a skin that should not be presented in the list of
2418 * available skins. Use for blacklisting a skin which you do not want to
2419 * remove from the .../skins/ directory
2422 /** Array for more like $wgSkipSkin. */
2423 $wgSkipSkins = array();
2426 * Optionally, we can specify a stylesheet to use for media="handheld".
2427 * This is recognized by some, but not all, handheld/mobile/PDA browsers.
2428 * If left empty, compliant handheld browsers won't pick up the skin
2429 * stylesheet, which is specified for 'screen' media.
2431 * Can be a complete URL, base-relative path, or $wgStylePath-relative path.
2432 * Try 'chick/main.css' to apply the Chick styles to the MonoBook HTML.
2434 * Will also be switched in when 'handheld=yes' is added to the URL, like
2435 * the 'printable=yes' mode for print media.
2437 $wgHandheldStyle = false;
2440 * If set, 'screen' and 'handheld' media specifiers for stylesheets are
2441 * transformed such that they apply to the iPhone/iPod Touch Mobile Safari,
2442 * which doesn't recognize 'handheld' but does support media queries on its
2445 * Consider only using this if you have a *really good* handheld stylesheet,
2446 * as iPhone users won't have any way to disable it and use the "grown-up"
2449 $wgHandheldForIPhone = false;
2452 * Allow user Javascript page?
2453 * This enables a lot of neat customizations, but may
2454 * increase security risk to users and server load.
2456 $wgAllowUserJs = false;
2459 * Allow user Cascading Style Sheets (CSS)?
2460 * This enables a lot of neat customizations, but may
2461 * increase security risk to users and server load.
2463 $wgAllowUserCss = false;
2466 * Allow user-preferences implemented in CSS?
2467 * This allows users to customise the site appearance to a greater
2468 * degree; disabling it will improve page load times.
2470 $wgAllowUserCssPrefs = true;
2472 /** Use the site's Javascript page? */
2473 $wgUseSiteJs = true;
2475 /** Use the site's Cascading Style Sheets (CSS)? */
2476 $wgUseSiteCss = true;
2479 * Break out of framesets. This can be used to prevent clickjacking attacks,
2480 * or to prevent external sites from framing your site with ads.
2482 $wgBreakFrames = false;
2485 * The X-Frame-Options header to send on pages sensitive to clickjacking
2486 * attacks, such as edit pages. This prevents those pages from being displayed
2487 * in a frame or iframe. The options are:
2489 * - 'DENY': Do not allow framing. This is recommended for most wikis.
2491 * - 'SAMEORIGIN': Allow framing by pages on the same domain. This can be used
2492 * to allow framing within a trusted domain. This is insecure if there
2493 * is a page on the same domain which allows framing of arbitrary URLs.
2495 * - false: Allow all framing. This opens up the wiki to XSS attacks and thus
2496 * full compromise of local user accounts. Private wikis behind a
2497 * corporate firewall are especially vulnerable. This is not
2500 * For extra safety, set $wgBreakFrames = true, to prevent framing on all pages,
2501 * not just edit pages.
2503 $wgEditPageFrameOptions = 'DENY';
2506 * Disable output compression (enabled by default if zlib is available)
2508 $wgDisableOutputCompression = false;
2511 * Should we allow a broader set of characters in id attributes, per HTML5? If
2512 * not, use only HTML 4-compatible IDs. This option is for testing -- when the
2513 * functionality is ready, it will be on by default with no option.
2515 * Currently this appears to work fine in all browsers, but it's disabled by
2516 * default because it normalizes id's a bit too aggressively, breaking preexisting
2517 * content (particularly Cite). See bug 27733, bug 27694, bug 27474.
2519 $wgExperimentalHtmlIds = false;
2522 * Abstract list of footer icons for skins in place of old copyrightico and poweredbyico code
2523 * You can add new icons to the built in copyright or poweredby, or you can create
2524 * a new block. Though note that you may need to add some custom css to get good styling
2525 * of new blocks in monobook. vector and modern should work without any special css.
2527 * $wgFooterIcons itself is a key/value array.
2528 * The key is the name of a block that the icons will be wrapped in. The final id varies
2529 * by skin; Monobook and Vector will turn poweredby into f-poweredbyico while Modern
2530 * turns it into mw_poweredby.
2531 * The value is either key/value array of icons or a string.
2532 * In the key/value array the key may or may not be used by the skin but it can
2533 * be used to find the icon and unset it or change the icon if needed.
2534 * This is useful for disabling icons that are set by extensions.
2535 * The value should be either a string or an array. If it is a string it will be output
2536 * directly as html, however some skins may choose to ignore it. An array is the preferred format
2537 * for the icon, the following keys are used:
2538 * src: An absolute url to the image to use for the icon, this is recommended
2539 * but not required, however some skins will ignore icons without an image
2540 * url: The url to use in the <a> arround the text or icon, if not set an <a> will not be outputted
2541 * alt: This is the text form of the icon, it will be displayed without an image in
2542 * skins like Modern or if src is not set, and will otherwise be used as
2543 * the alt="" for the image. This key is required.
2544 * width and height: If the icon specified by src is not of the standard size
2545 * you can specify the size of image to use with these keys.
2546 * Otherwise they will default to the standard 88x31.
2548 $wgFooterIcons = array(
2549 "copyright" => array(
2550 "copyright" => array(), // placeholder for the built in copyright icon
2552 "poweredby" => array(
2553 "mediawiki" => array(
2554 "src" => null, // Defaults to "$wgStylePath/common/images/poweredby_mediawiki_88x31.png"
2555 "url" => "//www.mediawiki.org/",
2556 "alt" => "Powered by MediaWiki",
2562 * Login / create account link behavior when it's possible for anonymous users to create an account
2563 * true = use a combined login / create account link
2564 * false = split login and create account into two separate links
2566 $wgUseCombinedLoginLink = true;
2569 * Search form behavior for Vector skin only
2570 * true = use an icon search button
2571 * false = use Go & Search buttons
2573 $wgVectorUseSimpleSearch = false;
2576 * Watch and unwatch as an icon rather than a link for Vector skin only
2577 * true = use an icon watch/unwatch button
2578 * false = use watch/unwatch text link
2580 $wgVectorUseIconWatch = false;
2583 * Display user edit counts in various prominent places.
2585 $wgEdititis = false;
2588 * Better directionality support (bug 6100 and related).
2589 * Removed in 1.18, still kept here for LiquidThreads backwards compatibility.
2591 * @deprecated since 1.18
2593 $wgBetterDirectionality = true;
2596 * Some web hosts attempt to rewrite all responses with a 404 (not found)
2597 * status code, mangling or hiding MediaWiki's output. If you are using such a
2598 * host, you should start looking for a better one. While you're doing that,
2599 * set this to false to convert some of MediaWiki's 404 responses to 200 so
2600 * that the generated error pages can be seen.
2602 * In cases where for technical reasons it is more important for MediaWiki to
2603 * send the correct status code than for the body to be transmitted intact,
2604 * this configuration variable is ignored.
2606 $wgSend404Code = true;
2608 /** @} */ # End of output format settings }
2610 /*************************************************************************//**
2611 * @name Resource loader settings
2616 * Client-side resource modules. Extensions should add their module definitions
2620 * $wgResourceModules['ext.myExtension'] = array(
2621 * 'scripts' => 'myExtension.js',
2622 * 'styles' => 'myExtension.css',
2623 * 'dependencies' => array( 'jquery.cookie', 'jquery.tabIndex' ),
2624 * 'localBasePath' => dirname( __FILE__ ),
2625 * 'remoteExtPath' => 'MyExtension',
2628 $wgResourceModules = array();
2631 * Extensions should register foreign module sources here. 'local' is a
2632 * built-in source that is not in this array, but defined by
2633 * ResourceLoader::__construct() so that it cannot be unset.
2636 * $wgResourceLoaderSources['foo'] = array(
2637 * 'loadScript' => 'http://example.org/w/load.php',
2638 * 'apiScript' => 'http://example.org/w/api.php'
2641 $wgResourceLoaderSources = array();
2644 * Default 'remoteBasePath' value for instances of ResourceLoaderFileModule.
2645 * If not set, then $wgScriptPath will be used as a fallback.
2647 $wgResourceBasePath = null;
2650 * Maximum time in seconds to cache resources served by the resource loader
2652 $wgResourceLoaderMaxage = array(
2653 'versioned' => array(
2654 // Squid/Varnish but also any other public proxy cache between the client and MediaWiki
2655 'server' => 30 * 24 * 60 * 60, // 30 days
2656 // On the client side (e.g. in the browser cache).
2657 'client' => 30 * 24 * 60 * 60, // 30 days
2659 'unversioned' => array(
2660 'server' => 5 * 60, // 5 minutes
2661 'client' => 5 * 60, // 5 minutes
2666 * The default debug mode (on/off) for of ResourceLoader requests. This will still
2667 * be overridden when the debug URL parameter is used.
2669 $wgResourceLoaderDebug = false;
2672 * Enable embedding of certain resources using Edge Side Includes. This will
2673 * improve performance but only works if there is something in front of the
2674 * web server (e..g a Squid or Varnish server) configured to process the ESI.
2676 $wgResourceLoaderUseESI = false;
2679 * Put each statement on its own line when minifying JavaScript. This makes
2680 * debugging in non-debug mode a bit easier.
2682 $wgResourceLoaderMinifierStatementsOnOwnLine = false;
2685 * Maximum line length when minifying JavaScript. This is not a hard maximum:
2686 * the minifier will try not to produce lines longer than this, but may be
2687 * forced to do so in certain cases.
2689 $wgResourceLoaderMinifierMaxLineLength = 1000;
2692 * Whether to include the mediawiki.legacy JS library (old wikibits.js), and its
2695 $wgIncludeLegacyJavaScript = true;
2698 * Whether to preload the mediawiki.util module as blocking module in the top queue.
2699 * Before MediaWiki 1.19, modules used to load slower/less asynchronous which allowed
2700 * modules to lack dependencies on 'popular' modules that were likely loaded already.
2701 * This setting is to aid scripts during migration by providing mediawiki.util
2702 * unconditionally (which was the most commonly missed dependency).
2703 * It doesn't cover all missing dependencies obviously but should fix most of them.
2704 * This should be removed at some point after site/user scripts have been fixed.
2705 * Enable this if your wiki has a large amount of user/site scripts that are lacking
2708 $wgPreloadJavaScriptMwUtil = false;
2711 * Whether or not to assing configuration variables to the global window object.
2712 * If this is set to false, old code using deprecated variables like:
2713 * " if ( window.wgRestrictionEdit ) ..."
2715 * " if ( wgIsArticle ) ..."
2716 * will no longer work and needs to use mw.config instead. For example:
2717 * " if ( mw.config.exists('wgRestrictionEdit') )"
2719 * " if ( mw.config.get('wgIsArticle') )".
2721 $wgLegacyJavaScriptGlobals = true;
2724 * If set to a positive number, ResourceLoader will not generate URLs whose
2725 * query string is more than this many characters long, and will instead use
2726 * multiple requests with shorter query strings. This degrades performance,
2727 * but may be needed if your web server has a low (less than, say 1024)
2728 * query string length limit or a low value for suhosin.get.max_value_length
2729 * that you can't increase.
2731 * If set to a negative number, ResourceLoader will assume there is no query
2732 * string length limit.
2734 $wgResourceLoaderMaxQueryLength = -1;
2737 * If set to true, JavaScript modules loaded from wiki pages will be parsed prior
2738 * to minification to validate it.
2740 * Parse errors will result in a JS exception being thrown during module load,
2741 * which avoids breaking other modules loaded in the same request.
2743 $wgResourceLoaderValidateJS = true;
2746 * If set to true, statically-sourced (file-backed) JavaScript resources will
2747 * be parsed for validity before being bundled up into ResourceLoader modules.
2749 * This can be helpful for development by providing better error messages in
2750 * default (non-debug) mode, but JavaScript parsing is slow and memory hungry
2751 * and may fail on large pre-bundled frameworks.
2753 $wgResourceLoaderValidateStaticJS = false;
2756 * If set to true, asynchronous loading of bottom-queue scripts in the "<head>"
2757 * will be enabled. This is an experimental feature that's supposed to make
2758 * JavaScript load faster.
2760 $wgResourceLoaderExperimentalAsyncLoading = false;
2762 /** @} */ # End of resource loader settings }
2765 /*************************************************************************//**
2766 * @name Page title and interwiki link settings
2771 * Name of the project namespace. If left set to false, $wgSitename will be
2774 $wgMetaNamespace = false;
2777 * Name of the project talk namespace.
2779 * Normally you can ignore this and it will be something like
2780 * $wgMetaNamespace . "_talk". In some languages, you may want to set this
2781 * manually for grammatical reasons.
2783 $wgMetaNamespaceTalk = false;
2786 * Additional namespaces. If the namespaces defined in Language.php and
2787 * Namespace.php are insufficient, you can create new ones here, for example,
2788 * to import Help files in other languages. You can also override the namespace
2789 * names of existing namespaces. Extensions developers should use
2790 * $wgCanonicalNamespaceNames.
2792 * PLEASE NOTE: Once you delete a namespace, the pages in that namespace will
2793 * no longer be accessible. If you rename it, then you can access them through
2794 * the new namespace name.
2796 * Custom namespaces should start at 100 to avoid conflicting with standard
2797 * namespaces, and should always follow the even/odd main/talk pattern.
2799 # $wgExtraNamespaces = array(
2801 # 101 => "Hilfe_Diskussion",
2803 # 103 => "Discussion_Aide"
2805 $wgExtraNamespaces = array();
2808 * Same as above, but for namespaces with gender distinction.
2809 * Note: the default form for the namespace should also be set
2810 * using $wgExtraNamespaces for the same index.
2813 $wgExtraGenderNamespaces = array();
2817 * These are alternate names for the primary localised namespace names, which
2818 * are defined by $wgExtraNamespaces and the language file. If a page is
2819 * requested with such a prefix, the request will be redirected to the primary
2822 * Set this to a map from namespace names to IDs.
2824 * $wgNamespaceAliases = array(
2825 * 'Wikipedian' => NS_USER,
2829 $wgNamespaceAliases = array();
2832 * Allowed title characters -- regex character class
2833 * Don't change this unless you know what you're doing
2835 * Problematic punctuation:
2836 * - []{}|# Are needed for link syntax, never enable these
2837 * - <> Causes problems with HTML escaping, don't use
2838 * - % Enabled by default, minor problems with path to query rewrite rules, see below
2839 * - + Enabled by default, but doesn't work with path to query rewrite rules, corrupted by apache
2840 * - ? Enabled by default, but doesn't work with path to PATH_INFO rewrites
2842 * All three of these punctuation problems can be avoided by using an alias, instead of a
2843 * rewrite rule of either variety.
2845 * The problem with % is that when using a path to query rewrite rule, URLs are
2846 * double-unescaped: once by Apache's path conversion code, and again by PHP. So
2847 * %253F, for example, becomes "?". Our code does not double-escape to compensate
2848 * for this, indeed double escaping would break if the double-escaped title was
2849 * passed in the query string rather than the path. This is a minor security issue
2850 * because articles can be created such that they are hard to view or edit.
2852 * In some rare cases you may wish to remove + for compatibility with old links.
2854 * Theoretically 0x80-0x9F of ISO 8859-1 should be disallowed, but
2855 * this breaks interlanguage links
2857 $wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF+";
2860 * The interwiki prefix of the current wiki, or false if it doesn't have one.
2862 $wgLocalInterwiki = false;
2865 * Expiry time for cache of interwiki table
2867 $wgInterwikiExpiry = 10800;
2869 /** Interwiki caching settings.
2870 $wgInterwikiCache specifies path to constant database file
2871 This cdb database is generated by dumpInterwiki from maintenance
2872 and has such key formats:
2873 dbname:key - a simple key (e.g. enwiki:meta)
2874 _sitename:key - site-scope key (e.g. wiktionary:meta)
2875 __global:key - global-scope key (e.g. __global:meta)
2876 __sites:dbname - site mapping (e.g. __sites:enwiki)
2877 Sites mapping just specifies site name, other keys provide
2878 "local url" data layout.
2879 $wgInterwikiScopes specify number of domains to check for messages:
2880 1 - Just wiki(db)-level
2881 2 - wiki and global levels
2883 $wgInterwikiFallbackSite - if unable to resolve from cache
2885 $wgInterwikiCache = false;
2886 $wgInterwikiScopes = 3;
2887 $wgInterwikiFallbackSite = 'wiki';
2890 * If local interwikis are set up which allow redirects,
2891 * set this regexp to restrict URLs which will be displayed
2892 * as 'redirected from' links.
2894 * It might look something like this:
2895 * $wgRedirectSources = '!^https?://[a-z-]+\.wikipedia\.org/!';
2897 * Leave at false to avoid displaying any incoming redirect markers.
2898 * This does not affect intra-wiki redirects, which don't change
2901 $wgRedirectSources = false;
2904 * Set this to false to avoid forcing the first letter of links to capitals.
2905 * WARNING: may break links! This makes links COMPLETELY case-sensitive. Links
2906 * appearing with a capital at the beginning of a sentence will *not* go to the
2907 * same place as links in the middle of a sentence using a lowercase initial.
2909 $wgCapitalLinks = true;
2912 * @since 1.16 - This can now be set per-namespace. Some special namespaces (such
2913 * as Special, see MWNamespace::$alwaysCapitalizedNamespaces for the full list) must be
2914 * true by default (and setting them has no effect), due to various things that
2915 * require them to be so. Also, since Talk namespaces need to directly mirror their
2916 * associated content namespaces, the values for those are ignored in favor of the
2917 * subject namespace's setting. Setting for NS_MEDIA is taken automatically from
2919 * EX: $wgCapitalLinkOverrides[ NS_FILE ] = false;
2921 $wgCapitalLinkOverrides = array();
2923 /** Which namespaces should support subpages?
2924 * See Language.php for a list of namespaces.
2926 $wgNamespacesWithSubpages = array(
2929 NS_USER_TALK
=> true,
2930 NS_PROJECT_TALK
=> true,
2931 NS_FILE_TALK
=> true,
2932 NS_MEDIAWIKI
=> true,
2933 NS_MEDIAWIKI_TALK
=> true,
2934 NS_TEMPLATE_TALK
=> true,
2935 NS_HELP_TALK
=> true,
2936 NS_CATEGORY_TALK
=> true
2940 * Array of namespaces which can be deemed to contain valid "content", as far
2941 * as the site statistics are concerned. Useful if additional namespaces also
2942 * contain "content" which should be considered when generating a count of the
2943 * number of articles in the wiki.
2945 $wgContentNamespaces = array( NS_MAIN
);
2948 * Max number of redirects to follow when resolving redirects.
2949 * 1 means only the first redirect is followed (default behavior).
2950 * 0 or less means no redirects are followed.
2952 $wgMaxRedirects = 1;
2955 * Array of invalid page redirect targets.
2956 * Attempting to create a redirect to any of the pages in this array
2957 * will make the redirect fail.
2958 * Userlogout is hard-coded, so it does not need to be listed here.
2959 * (bug 10569) Disallow Mypage and Mytalk as well.
2961 * As of now, this only checks special pages. Redirects to pages in
2962 * other namespaces cannot be invalidated by this variable.
2964 $wgInvalidRedirectTargets = array( 'Filepath', 'Mypage', 'Mytalk' );
2966 /** @} */ # End of title and interwiki settings }
2968 /************************************************************************//**
2969 * @name Parser settings
2970 * These settings configure the transformation from wikitext to HTML.
2975 * Parser configuration. Associative array with the following members:
2977 * class The class name
2979 * preprocessorClass The preprocessor class. Two classes are currently available:
2980 * Preprocessor_Hash, which uses plain PHP arrays for tempoarary
2981 * storage, and Preprocessor_DOM, which uses the DOM module for
2982 * temporary storage. Preprocessor_DOM generally uses less memory;
2983 * the speed of the two is roughly the same.
2985 * If this parameter is not given, it uses Preprocessor_DOM if the
2986 * DOM module is available, otherwise it uses Preprocessor_Hash.
2988 * The entire associative array will be passed through to the constructor as
2989 * the first parameter. Note that only Setup.php can use this variable --
2990 * the configuration will change at runtime via $wgParser member functions, so
2991 * the contents of this variable will be out-of-date. The variable can only be
2992 * changed during LocalSettings.php, in particular, it can't be changed during
2993 * an extension setup function.
2995 $wgParserConf = array(
2996 'class' => 'Parser',
2997 #'preprocessorClass' => 'Preprocessor_Hash',
3000 /** Maximum indent level of toc. */
3001 $wgMaxTocLevel = 999;
3004 * A complexity limit on template expansion
3006 $wgMaxPPNodeCount = 1000000;
3009 * Maximum recursion depth for templates within templates.
3010 * The current parser adds two levels to the PHP call stack for each template,
3011 * and xdebug limits the call stack to 100 by default. So this should hopefully
3012 * stop the parser before it hits the xdebug limit.
3014 $wgMaxTemplateDepth = 40;
3016 /** @see $wgMaxTemplateDepth */
3017 $wgMaxPPExpandDepth = 40;
3019 /** The external URL protocols */
3020 $wgUrlProtocols = array(
3025 'ircs://', // @bug 28503
3027 'telnet://', // Well if we're going to support the above.. -ævar
3028 'nntp://', // @bug 3808 RFC 1738
3035 '//', // for protocol-relative URLs
3039 * If true, removes (substitutes) templates in "~~~~" signatures.
3041 $wgCleanSignatures = true;
3043 /** Whether to allow inline image pointing to other websites */
3044 $wgAllowExternalImages = false;
3047 * If the above is false, you can specify an exception here. Image URLs
3048 * that start with this string are then rendered, while all others are not.
3049 * You can use this to set up a trusted, simple repository of images.
3050 * You may also specify an array of strings to allow multiple sites
3054 * $wgAllowExternalImagesFrom = 'http://127.0.0.1/';
3055 * $wgAllowExternalImagesFrom = array( 'http://127.0.0.1/', 'http://example.com' );
3058 $wgAllowExternalImagesFrom = '';
3060 /** If $wgAllowExternalImages is false, you can allow an on-wiki
3061 * whitelist of regular expression fragments to match the image URL
3062 * against. If the image matches one of the regular expression fragments,
3063 * The image will be displayed.
3065 * Set this to true to enable the on-wiki whitelist (MediaWiki:External image whitelist)
3066 * Or false to disable it
3068 $wgEnableImageWhitelist = true;
3071 * A different approach to the above: simply allow the "<img>" tag to be used.
3072 * This allows you to specify alt text and other attributes, copy-paste HTML to
3073 * your wiki more easily, etc. However, allowing external images in any manner
3074 * will allow anyone with editing rights to snoop on your visitors' IP
3075 * addresses and so forth, if they wanted to, by inserting links to images on
3076 * sites they control.
3078 $wgAllowImageTag = false;
3081 * $wgUseTidy: use tidy to make sure HTML output is sane.
3082 * Tidy is a free tool that fixes broken HTML.
3083 * See http://www.w3.org/People/Raggett/tidy/
3085 * - $wgTidyBin should be set to the path of the binary and
3086 * - $wgTidyConf to the path of the configuration file.
3087 * - $wgTidyOpts can include any number of parameters.
3088 * - $wgTidyInternal controls the use of the PECL extension or the
3089 * libtidy (PHP >= 5) extension to use an in-process tidy library instead
3090 * of spawning a separate program.
3091 * Normally you shouldn't need to override the setting except for
3092 * debugging. To install, use 'pear install tidy' and add a line
3093 * 'extension=tidy.so' to php.ini.
3096 /** @see $wgUseTidy */
3097 $wgAlwaysUseTidy = false;
3098 /** @see $wgUseTidy */
3099 $wgTidyBin = 'tidy';
3100 /** @see $wgUseTidy */
3101 $wgTidyConf = $IP.'/includes/tidy.conf';
3102 /** @see $wgUseTidy */
3104 /** @see $wgUseTidy */
3105 $wgTidyInternal = extension_loaded( 'tidy' );
3108 * Put tidy warnings in HTML comments
3109 * Only works for internal tidy.
3111 $wgDebugTidy = false;
3113 /** Allow raw, unchecked HTML in "<html>...</html>" sections.
3114 * THIS IS VERY DANGEROUS on a publicly editable site, so USE wgGroupPermissions
3115 * TO RESTRICT EDITING to only those that you trust
3120 * Set a default target for external links, e.g. _blank to pop up a new window
3122 $wgExternalLinkTarget = false;
3125 * If true, external URL links in wiki text will be given the
3126 * rel="nofollow" attribute as a hint to search engines that
3127 * they should not be followed for ranking purposes as they
3128 * are user-supplied and thus subject to spamming.
3130 $wgNoFollowLinks = true;
3133 * Namespaces in which $wgNoFollowLinks doesn't apply.
3134 * See Language.php for a list of namespaces.
3136 $wgNoFollowNsExceptions = array();
3139 * If this is set to an array of domains, external links to these domain names
3140 * (or any subdomains) will not be set to rel="nofollow" regardless of the
3141 * value of $wgNoFollowLinks. For instance:
3143 * $wgNoFollowDomainExceptions = array( 'en.wikipedia.org', 'wiktionary.org' );
3145 * This would add rel="nofollow" to links to de.wikipedia.org, but not
3146 * en.wikipedia.org, wiktionary.org, en.wiktionary.org, us.en.wikipedia.org,
3149 $wgNoFollowDomainExceptions = array();
3152 * Allow DISPLAYTITLE to change title display
3154 $wgAllowDisplayTitle = true;
3157 * For consistency, restrict DISPLAYTITLE to titles that normalize to the same
3160 $wgRestrictDisplayTitle = true;
3163 * Maximum number of calls per parse to expensive parser functions such as
3166 $wgExpensiveParserFunctionLimit = 100;
3169 * Preprocessor caching threshold
3170 * Setting it to 'false' will disable the preprocessor cache.
3172 $wgPreprocessorCacheThreshold = 1000;
3175 * Enable interwiki transcluding. Only when iw_trans=1.
3177 $wgEnableScaryTranscluding = false;
3180 * (see next option $wgGlobalDatabase).
3182 $wgTranscludeCacheExpiry = 3600;
3184 /** @} */ # end of parser settings }
3186 /************************************************************************//**
3192 * Method used to determine if a page in a content namespace should be counted
3193 * as a valid article.
3195 * Redirect pages will never be counted as valid articles.
3197 * This variable can have the following values:
3198 * - 'any': all pages as considered as valid articles
3199 * - 'comma': the page must contain a comma to be considered valid
3200 * - 'link': the page must contain a [[wiki link]] to be considered valid
3201 * - null: the value will be set at run time depending on $wgUseCommaCount:
3202 * if $wgUseCommaCount is false, it will be 'link', if it is true
3203 * it will be 'comma'
3205 * See also See http://www.mediawiki.org/wiki/Manual:Article_count
3207 * Retroactively changing this variable will not affect the existing count,
3208 * to update it, you will need to run the maintenance/updateArticleCount.php
3211 $wgArticleCountMethod = null;
3214 * Backward compatibility setting, will set $wgArticleCountMethod if it is null.
3215 * @deprecated since 1.18; use $wgArticleCountMethod instead
3217 $wgUseCommaCount = false;
3220 * wgHitcounterUpdateFreq sets how often page counters should be updated, higher
3221 * values are easier on the database. A value of 1 causes the counters to be
3222 * updated on every hit, any higher value n cause them to update *on average*
3223 * every n hits. Should be set to either 1 or something largish, eg 1000, for
3224 * maximum efficiency.
3226 $wgHitcounterUpdateFreq = 1;
3229 * How many days user must be idle before he is considered inactive. Will affect
3230 * the number shown on Special:Statistics and Special:ActiveUsers special page.
3231 * You might want to leave this as the default value, to provide comparable
3232 * numbers between different wikis.
3234 $wgActiveUserDays = 30;
3236 /** @} */ # End of statistics }
3238 /************************************************************************//**
3239 * @name User accounts, authentication
3243 /** For compatibility with old installations set to false */
3244 $wgPasswordSalt = true;
3247 * Specifies the minimal length of a user password. If set to 0, empty pass-
3248 * words are allowed.
3250 $wgMinimalPasswordLength = 1;
3253 * Whether to allow password resets ("enter some identifying data, and we'll send an email
3254 * with a temporary password you can use to get back into the account") identified by
3255 * various bits of data. Setting all of these to false (or the whole variable to false)
3256 * has the effect of disabling password resets entirely
3258 $wgPasswordResetRoutes = array(
3264 * Maximum number of Unicode characters in signature
3266 $wgMaxSigChars = 255;
3269 * Maximum number of bytes in username. You want to run the maintenance
3270 * script ./maintenance/checkUsernames.php once you have changed this value.
3272 $wgMaxNameChars = 255;
3275 * Array of usernames which may not be registered or logged in from
3276 * Maintenance scripts can still use these
3278 $wgReservedUsernames = array(
3279 'MediaWiki default', // Default 'Main Page' and MediaWiki: message pages
3280 'Conversion script', // Used for the old Wikipedia software upgrade
3281 'Maintenance script', // Maintenance scripts which perform editing, image import script
3282 'Template namespace initialisation script', // Used in 1.2->1.3 upgrade
3283 'ScriptImporter', // Default user name used by maintenance/importSiteScripts.php
3284 'msg:double-redirect-fixer', // Automatic double redirect fix
3285 'msg:usermessage-editor', // Default user for leaving user messages
3286 'msg:proxyblocker', // For Special:Blockme
3290 * Settings added to this array will override the default globals for the user
3291 * preferences used by anonymous visitors and newly created accounts.
3292 * For instance, to disable section editing links:
3293 * $wgDefaultUserOptions ['editsection'] = 0;
3296 $wgDefaultUserOptions = array(
3297 'ccmeonemails' => 0,
3299 'date' => 'default',
3302 'disablesuggest' => 0,
3303 'editfont' => 'default',
3304 'editondblclick' => 0,
3306 'editsectiononrightclick' => 0,
3307 'enotifminoredits' => 0,
3308 'enotifrevealaddr' => 0,
3309 'enotifusertalkpages' => 1,
3310 'enotifwatchlistpages' => 0,
3311 'extendwatchlist' => 0,
3312 'externaldiff' => 0,
3313 'externaleditor' => 0,
3315 'forceeditsummary' => 0,
3316 'gender' => 'unknown',
3318 'hidepatrolled' => 0,
3322 'minordefault' => 0,
3323 'newpageshidepatrolled' => 0,
3325 'noconvertlink' => 0,
3326 'norollbackdiff' => 0,
3327 'numberheadings' => 0,
3328 'previewonfirst' => 0,
3329 'previewontop' => 1,
3333 'rememberpassword' => 0,
3335 'searchlimit' => 20,
3336 'showhiddencats' => 0,
3337 'showjumplinks' => 1,
3338 'shownumberswatching' => 1,
3342 'stubthreshold' => 0,
3345 'uselivepreview' => 0,
3347 'watchcreations' => 0,
3348 'watchdefault' => 0,
3349 'watchdeletion' => 0,
3350 'watchlistdays' => 3.0,
3351 'watchlisthideanons' => 0,
3352 'watchlisthidebots' => 0,
3353 'watchlisthideliu' => 0,
3354 'watchlisthideminor' => 0,
3355 'watchlisthideown' => 0,
3356 'watchlisthidepatrolled' => 0,
3362 * Whether or not to allow and use real name fields.
3363 * @deprecated since 1.16, use $wgHiddenPrefs[] = 'realname' below to disable real
3366 $wgAllowRealName = true;
3368 /** An array of preferences to not show for the user */
3369 $wgHiddenPrefs = array();
3372 * Characters to prevent during new account creations.
3373 * This is used in a regular expression character class during
3374 * registration (regex metacharacters like / are escaped).
3376 $wgInvalidUsernameCharacters = '@';
3379 * Character used as a delimiter when testing for interwiki userrights
3380 * (In Special:UserRights, it is possible to modify users on different
3381 * databases if the delimiter is used, e.g. "Someuser@enwiki").
3383 * It is recommended that you have this delimiter in
3384 * $wgInvalidUsernameCharacters above, or you will not be able to
3385 * modify the user rights of those users via Special:UserRights
3387 $wgUserrightsInterwikiDelimiter = '@';
3390 * Use some particular type of external authentication. The specific
3391 * authentication module you use will normally require some extra settings to
3394 * null indicates no external authentication is to be used. Otherwise,
3395 * $wgExternalAuthType must be the name of a non-abstract class that extends
3398 * Core authentication modules can be found in includes/extauth/.
3400 $wgExternalAuthType = null;
3403 * Configuration for the external authentication. This may include arbitrary
3404 * keys that depend on the authentication mechanism. For instance,
3405 * authentication against another web app might require that the database login
3406 * info be provided. Check the file where your auth mechanism is defined for
3407 * info on what to put here.
3409 $wgExternalAuthConf = array();
3412 * When should we automatically create local accounts when external accounts
3413 * already exist, if using ExternalAuth? Can have three values: 'never',
3414 * 'login', 'view'. 'view' requires the external database to support cookies,
3415 * and implies 'login'.
3417 * TODO: Implement 'view' (currently behaves like 'login').
3419 $wgAutocreatePolicy = 'login';
3422 * Policies for how each preference is allowed to be changed, in the presence
3423 * of external authentication. The keys are preference keys, e.g., 'password'
3424 * or 'emailaddress' (see Preferences.php et al.). The value can be one of the
3427 * - local: Allow changes to this pref through the wiki interface but only
3428 * apply them locally (default).
3429 * - semiglobal: Allow changes through the wiki interface and try to apply them
3430 * to the foreign database, but continue on anyway if that fails.
3431 * - global: Allow changes through the wiki interface, but only let them go
3432 * through if they successfully update the foreign database.
3433 * - message: Allow no local changes for linked accounts; replace the change
3434 * form with a message provided by the auth plugin, telling the user how to
3435 * change the setting externally (maybe providing a link, etc.). If the auth
3436 * plugin provides no message for this preference, hide it entirely.
3438 * Accounts that are not linked to an external account are never affected by
3439 * this setting. You may want to look at $wgHiddenPrefs instead.
3440 * $wgHiddenPrefs supersedes this option.
3442 * TODO: Implement message, global.
3444 $wgAllowPrefChange = array();
3447 * This is to let user authenticate using https when they come from http.
3448 * Based on an idea by George Herbert on wikitech-l:
3449 * http://lists.wikimedia.org/pipermail/wikitech-l/2010-October/050065.html
3452 $wgSecureLogin = false;
3454 /** @} */ # end user accounts }
3456 /************************************************************************//**
3457 * @name User rights, access control and monitoring
3462 * Number of seconds before autoblock entries expire. Default 86400 = 1 day.
3464 $wgAutoblockExpiry = 86400;
3467 * Set this to true to allow blocked users to edit their own user talk page.
3469 $wgBlockAllowsUTEdit = false;
3471 /** Allow sysops to ban users from accessing Emailuser */
3472 $wgSysopEmailBans = true;
3475 * Limits on the possible sizes of range blocks.
3477 * CIDR notation is hard to understand, it's easy to mistakenly assume that a
3478 * /1 is a small range and a /31 is a large range. For IPv4, setting a limit of
3479 * half the number of bits avoids such errors, and allows entire ISPs to be
3480 * blocked using a small number of range blocks.
3482 * For IPv6, RFC 3177 recommends that a /48 be allocated to every residential
3483 * customer, so range blocks larger than /64 (half the number of bits) will
3484 * plainly be required. RFC 4692 implies that a very large ISP may be
3485 * allocated a /19 if a generous HD-Ratio of 0.8 is used, so we will use that
3486 * as our limit. As of 2012, blocking the whole world would require a /4 range.
3488 $wgBlockCIDRLimit = array(
3489 'IPv4' => 16, # Blocks larger than a /16 (64k addresses) will not be allowed
3494 * If true, blocked users will not be allowed to login. When using this with
3495 * a public wiki, the effect of logging out blocked users may actually be
3496 * avers: unless the user's address is also blocked (e.g. auto-block),
3497 * logging the user out will again allow reading and editing, just as for
3498 * anonymous visitors.
3500 $wgBlockDisablesLogin = false;
3503 * Pages anonymous user may see as an array, e.g.
3506 * $wgWhitelistRead = array ( "Main Page", "Wikipedia:Help");
3509 * Special:Userlogin and Special:ChangePassword are always whitelisted.
3511 * NOTE: This will only work if $wgGroupPermissions['*']['read'] is false --
3512 * see below. Otherwise, ALL pages are accessible, regardless of this setting.
3514 * Also note that this will only protect _pages in the wiki_. Uploaded files
3515 * will remain readable. You can use img_auth.php to protect uploaded files,
3516 * see http://www.mediawiki.org/wiki/Manual:Image_Authorization
3518 $wgWhitelistRead = false;
3521 * Should editors be required to have a validated e-mail
3522 * address before being allowed to edit?
3524 $wgEmailConfirmToEdit = false;
3527 * Permission keys given to users in each group.
3528 * This is an array where the keys are all groups and each value is an
3529 * array of the format (right => boolean).
3531 * The second format is used to support per-namespace permissions.
3532 * Note that this feature does not fully work for all permission types.
3534 * All users are implicitly in the '*' group including anonymous visitors;
3535 * logged-in users are all implicitly in the 'user' group. These will be
3536 * combined with the permissions of all groups that a given user is listed
3537 * in in the user_groups table.
3539 * Note: Don't set $wgGroupPermissions = array(); unless you know what you're
3540 * doing! This will wipe all permissions, and may mean that your users are
3541 * unable to perform certain essential tasks or access new functionality
3542 * when new permissions are introduced and default grants established.
3544 * Functionality to make pages inaccessible has not been extensively tested
3545 * for security. Use at your own risk!
3547 * This replaces $wgWhitelistAccount and $wgWhitelistEdit
3549 $wgGroupPermissions = array();
3551 /** @cond file_level_code */
3552 // Implicit group for all visitors
3553 $wgGroupPermissions['*']['createaccount'] = true;
3554 $wgGroupPermissions['*']['read'] = true;
3555 $wgGroupPermissions['*']['edit'] = true;
3556 $wgGroupPermissions['*']['createpage'] = true;
3557 $wgGroupPermissions['*']['createtalk'] = true;
3558 $wgGroupPermissions['*']['writeapi'] = true;
3559 //$wgGroupPermissions['*']['patrolmarks'] = false; // let anons see what was patrolled
3561 // Implicit group for all logged-in accounts
3562 $wgGroupPermissions['user']['move'] = true;
3563 $wgGroupPermissions['user']['move-subpages'] = true;
3564 $wgGroupPermissions['user']['move-rootuserpages'] = true; // can move root userpages
3565 $wgGroupPermissions['user']['movefile'] = true;
3566 $wgGroupPermissions['user']['read'] = true;
3567 $wgGroupPermissions['user']['edit'] = true;
3568 $wgGroupPermissions['user']['createpage'] = true;
3569 $wgGroupPermissions['user']['createtalk'] = true;
3570 $wgGroupPermissions['user']['writeapi'] = true;
3571 $wgGroupPermissions['user']['upload'] = true;
3572 $wgGroupPermissions['user']['reupload'] = true;
3573 $wgGroupPermissions['user']['reupload-shared'] = true;
3574 $wgGroupPermissions['user']['minoredit'] = true;
3575 $wgGroupPermissions['user']['purge'] = true; // can use ?action=purge without clicking "ok"
3576 $wgGroupPermissions['user']['sendemail'] = true;
3578 // Implicit group for accounts that pass $wgAutoConfirmAge
3579 $wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true;
3581 // Users with bot privilege can have their edits hidden
3582 // from various log pages by default
3583 $wgGroupPermissions['bot']['bot'] = true;
3584 $wgGroupPermissions['bot']['autoconfirmed'] = true;
3585 $wgGroupPermissions['bot']['nominornewtalk'] = true;
3586 $wgGroupPermissions['bot']['autopatrol'] = true;
3587 $wgGroupPermissions['bot']['suppressredirect'] = true;
3588 $wgGroupPermissions['bot']['apihighlimits'] = true;
3589 $wgGroupPermissions['bot']['writeapi'] = true;
3590 #$wgGroupPermissions['bot']['editprotected'] = true; // can edit all protected pages without cascade protection enabled
3592 // Most extra permission abilities go to this group
3593 $wgGroupPermissions['sysop']['block'] = true;
3594 $wgGroupPermissions['sysop']['createaccount'] = true;
3595 $wgGroupPermissions['sysop']['delete'] = true;
3596 $wgGroupPermissions['sysop']['bigdelete'] = true; // can be separately configured for pages with > $wgDeleteRevisionsLimit revs
3597 $wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text
3598 $wgGroupPermissions['sysop']['deletedtext'] = true; // can view deleted revision text
3599 $wgGroupPermissions['sysop']['undelete'] = true;
3600 $wgGroupPermissions['sysop']['editinterface'] = true;
3601 $wgGroupPermissions['sysop']['editusercss'] = true;
3602 $wgGroupPermissions['sysop']['edituserjs'] = true;
3603 $wgGroupPermissions['sysop']['import'] = true;
3604 $wgGroupPermissions['sysop']['importupload'] = true;
3605 $wgGroupPermissions['sysop']['move'] = true;
3606 $wgGroupPermissions['sysop']['move-subpages'] = true;
3607 $wgGroupPermissions['sysop']['move-rootuserpages'] = true;
3608 $wgGroupPermissions['sysop']['patrol'] = true;
3609 $wgGroupPermissions['sysop']['autopatrol'] = true;
3610 $wgGroupPermissions['sysop']['protect'] = true;
3611 $wgGroupPermissions['sysop']['proxyunbannable'] = true;
3612 $wgGroupPermissions['sysop']['rollback'] = true;
3613 $wgGroupPermissions['sysop']['upload'] = true;
3614 $wgGroupPermissions['sysop']['reupload'] = true;
3615 $wgGroupPermissions['sysop']['reupload-shared'] = true;
3616 $wgGroupPermissions['sysop']['unwatchedpages'] = true;
3617 $wgGroupPermissions['sysop']['autoconfirmed'] = true;
3618 $wgGroupPermissions['sysop']['ipblock-exempt'] = true;
3619 $wgGroupPermissions['sysop']['blockemail'] = true;
3620 $wgGroupPermissions['sysop']['markbotedits'] = true;
3621 $wgGroupPermissions['sysop']['apihighlimits'] = true;
3622 $wgGroupPermissions['sysop']['browsearchive'] = true;
3623 $wgGroupPermissions['sysop']['noratelimit'] = true;
3624 $wgGroupPermissions['sysop']['movefile'] = true;
3625 $wgGroupPermissions['sysop']['unblockself'] = true;
3626 $wgGroupPermissions['sysop']['suppressredirect'] = true;
3627 #$wgGroupPermissions['sysop']['upload_by_url'] = true;
3628 #$wgGroupPermissions['sysop']['mergehistory'] = true;
3630 // Permission to change users' group assignments
3631 $wgGroupPermissions['bureaucrat']['userrights'] = true;
3632 $wgGroupPermissions['bureaucrat']['noratelimit'] = true;
3633 // Permission to change users' groups assignments across wikis
3634 #$wgGroupPermissions['bureaucrat']['userrights-interwiki'] = true;
3635 // Permission to export pages including linked pages regardless of $wgExportMaxLinkDepth
3636 #$wgGroupPermissions['bureaucrat']['override-export-depth'] = true;
3638 #$wgGroupPermissions['sysop']['deleterevision'] = true;
3639 // To hide usernames from users and Sysops
3640 #$wgGroupPermissions['suppress']['hideuser'] = true;
3641 // To hide revisions/log items from users and Sysops
3642 #$wgGroupPermissions['suppress']['suppressrevision'] = true;
3643 // For private suppression log access
3644 #$wgGroupPermissions['suppress']['suppressionlog'] = true;
3647 * The developer group is deprecated, but can be activated if need be
3648 * to use the 'lockdb' and 'unlockdb' special pages. Those require
3649 * that a lock file be defined and creatable/removable by the web
3652 # $wgGroupPermissions['developer']['siteadmin'] = true;
3657 * Permission keys revoked from users in each group.
3658 * This acts the same way as wgGroupPermissions above, except that
3659 * if the user is in a group here, the permission will be removed from them.
3661 * Improperly setting this could mean that your users will be unable to perform
3662 * certain essential tasks, so use at your own risk!
3664 $wgRevokePermissions = array();
3667 * Implicit groups, aren't shown on Special:Listusers or somewhere else
3669 $wgImplicitGroups = array( '*', 'user', 'autoconfirmed' );
3672 * A map of group names that the user is in, to group names that those users
3673 * are allowed to add or revoke.
3675 * Setting the list of groups to add or revoke to true is equivalent to "any group".
3677 * For example, to allow sysops to add themselves to the "bot" group:
3679 * $wgGroupsAddToSelf = array( 'sysop' => array( 'bot' ) );
3681 * Implicit groups may be used for the source group, for instance:
3683 * $wgGroupsRemoveFromSelf = array( '*' => true );
3685 * This allows users in the '*' group (i.e. any user) to remove themselves from
3686 * any group that they happen to be in.
3689 $wgGroupsAddToSelf = array();
3691 /** @see $wgGroupsAddToSelf */
3692 $wgGroupsRemoveFromSelf = array();
3695 * Set of available actions that can be restricted via action=protect
3696 * You probably shouldn't change this.
3697 * Translated through restriction-* messages.
3698 * Title::getRestrictionTypes() will remove restrictions that are not
3699 * applicable to a specific title (create and upload)
3701 $wgRestrictionTypes = array( 'create', 'edit', 'move', 'upload' );
3704 * Rights which can be required for each protection level (via action=protect)
3706 * You can add a new protection level that requires a specific
3707 * permission by manipulating this array. The ordering of elements
3708 * dictates the order on the protection form's lists.
3710 * - '' will be ignored (i.e. unprotected)
3711 * - 'sysop' is quietly rewritten to 'protect' for backwards compatibility
3713 $wgRestrictionLevels = array( '', 'autoconfirmed', 'sysop' );
3716 * Set the minimum permissions required to edit pages in each
3717 * namespace. If you list more than one permission, a user must
3718 * have all of them to edit pages in that namespace.
3720 * Note: NS_MEDIAWIKI is implicitly restricted to editinterface.
3722 $wgNamespaceProtection = array();
3725 * Pages in namespaces in this array can not be used as templates.
3726 * Elements must be numeric namespace ids.
3727 * Among other things, this may be useful to enforce read-restrictions
3728 * which may otherwise be bypassed by using the template machanism.
3730 $wgNonincludableNamespaces = array();
3733 * Number of seconds an account is required to age before it's given the
3734 * implicit 'autoconfirm' group membership. This can be used to limit
3735 * privileges of new accounts.
3737 * Accounts created by earlier versions of the software may not have a
3738 * recorded creation date, and will always be considered to pass the age test.
3740 * When left at 0, all registered accounts will pass.
3744 * $wgAutoConfirmAge = 600; // ten minutes
3745 * $wgAutoConfirmAge = 3600*24; // one day
3748 $wgAutoConfirmAge = 0;
3751 * Number of edits an account requires before it is autoconfirmed.
3752 * Passing both this AND the time requirement is needed. Example:
3755 * $wgAutoConfirmCount = 50;
3758 $wgAutoConfirmCount = 0;
3761 * Automatically add a usergroup to any user who matches certain conditions.
3763 * array( '&' or '|' or '^' or '!', cond1, cond2, ... )
3764 * where cond1, cond2, ... are themselves conditions; *OR*
3765 * APCOND_EMAILCONFIRMED, *OR*
3766 * array( APCOND_EMAILCONFIRMED ), *OR*
3767 * array( APCOND_EDITCOUNT, number of edits ), *OR*
3768 * array( APCOND_AGE, seconds since registration ), *OR*
3769 * array( APCOND_INGROUPS, group1, group2, ... ), *OR*
3770 * array( APCOND_ISIP, ip ), *OR*
3771 * array( APCOND_IPINRANGE, range ), *OR*
3772 * array( APCOND_AGE_FROM_EDIT, seconds since first edit ), *OR*
3773 * array( APCOND_BLOCKED ), *OR*
3774 * array( APCOND_ISBOT ), *OR*
3775 * similar constructs defined by extensions.
3777 * If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any
3778 * user who has provided an e-mail address.
3780 $wgAutopromote = array(
3781 'autoconfirmed' => array( '&',
3782 array( APCOND_EDITCOUNT
, &$wgAutoConfirmCount ),
3783 array( APCOND_AGE
, &$wgAutoConfirmAge ),
3788 * Automatically add a usergroup to any user who matches certain conditions.
3789 * Does not add the user to the group again if it has been removed.
3790 * Also, does not remove the group if the user no longer meets the criteria.
3793 * array( event => criteria, ... )
3795 * 'onEdit' (when user edits) or 'onView' (when user views the wiki)
3796 * and criteria has the same format as $wgAutopromote
3798 * @see $wgAutopromote
3801 $wgAutopromoteOnce = array(
3802 'onEdit' => array(),
3807 * Put user rights log entries for autopromotion in recent changes?
3810 $wgAutopromoteOnceLogInRC = true;
3813 * $wgAddGroups and $wgRemoveGroups can be used to give finer control over who
3814 * can assign which groups at Special:Userrights. Example configuration:
3817 * // Bureaucrat can add any group
3818 * $wgAddGroups['bureaucrat'] = true;
3819 * // Bureaucrats can only remove bots and sysops
3820 * $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' );
3821 * // Sysops can make bots
3822 * $wgAddGroups['sysop'] = array( 'bot' );
3823 * // Sysops can disable other sysops in an emergency, and disable bots
3824 * $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' );
3827 $wgAddGroups = array();
3828 /** @see $wgAddGroups */
3829 $wgRemoveGroups = array();
3832 * A list of available rights, in addition to the ones defined by the core.
3833 * For extensions only.
3835 $wgAvailableRights = array();
3838 * Optional to restrict deletion of pages with higher revision counts
3839 * to users with the 'bigdelete' permission. (Default given to sysops.)
3841 $wgDeleteRevisionsLimit = 0;
3843 /** Number of accounts each IP address may create, 0 to disable.
3844 * Requires memcached */
3845 $wgAccountCreationThrottle = 0;
3848 * Edits matching these regular expressions in body text
3849 * will be recognised as spam and rejected automatically.
3851 * There's no administrator override on-wiki, so be careful what you set. :)
3852 * May be an array of regexes or a single string for backwards compatibility.
3854 * See http://en.wikipedia.org/wiki/Regular_expression
3855 * Note that each regex needs a beginning/end delimiter, eg: # or /
3857 $wgSpamRegex = array();
3859 /** Same as the above except for edit summaries */
3860 $wgSummarySpamRegex = array();
3863 * Whether to use DNS blacklists in $wgDnsBlacklistUrls to check for open proxies
3866 $wgEnableDnsBlacklist = false;
3869 * @deprecated since 1.17 Use $wgEnableDnsBlacklist instead, only kept for backward
3872 $wgEnableSorbs = false;
3875 * List of DNS blacklists to use, if $wgEnableDnsBlacklist is true. This is an
3876 * array of either a URL or an array with the URL and a key (should the blacklist
3877 * require a key). For example:
3879 * $wgDnsBlacklistUrls = array(
3880 * // String containing URL
3881 * 'http.dnsbl.sorbs.net',
3882 * // Array with URL and key, for services that require a key
3883 * array( 'dnsbl.httpbl.net', 'mykey' ),
3884 * // Array with just the URL. While this works, it is recommended that you
3885 * // just use a string as shown above
3886 * array( 'opm.tornevall.org' )
3891 $wgDnsBlacklistUrls = array( 'http.dnsbl.sorbs.net.' );
3894 * @deprecated since 1.17 Use $wgDnsBlacklistUrls instead, only kept for backward
3897 $wgSorbsUrl = array();
3900 * Proxy whitelist, list of addresses that are assumed to be non-proxy despite
3901 * what the other methods might say.
3903 $wgProxyWhitelist = array();
3906 * Simple rate limiter options to brake edit floods. Maximum number actions
3907 * allowed in the given number of seconds; after that the violating client re-
3908 * ceives HTTP 500 error pages until the period elapses.
3910 * array( 4, 60 ) for a maximum of 4 hits in 60 seconds.
3912 * This option set is experimental and likely to change. Requires memcached.
3914 $wgRateLimits = array(
3916 'anon' => null, // for any and all anonymous edits (aggregate)
3917 'user' => null, // for each logged-in user
3918 'newbie' => null, // for each recent (autoconfirmed) account; overrides 'user'
3919 'ip' => null, // for each anon and recent account
3920 'subnet' => null, // ... with final octet removed
3928 'mailpassword' => array(
3931 'emailuser' => array(
3937 * Set to a filename to log rate limiter hits.
3939 $wgRateLimitLog = null;
3942 * Array of IPs which should be excluded from rate limits.
3943 * This may be useful for whitelisting NAT gateways for conferences, etc.
3945 $wgRateLimitsExcludedIPs = array();
3948 * Log IP addresses in the recentchanges table; can be accessed only by
3949 * extensions (e.g. CheckUser) or a DB admin
3951 $wgPutIPinRC = true;
3954 * Integer defining default number of entries to show on
3955 * special pages which are query-pages such as Special:Whatlinkshere.
3957 $wgQueryPageDefaultLimit = 50;
3960 * Limit password attempts to X attempts per Y seconds per IP per account.
3961 * Requires memcached.
3963 $wgPasswordAttemptThrottle = array( 'count' => 5, 'seconds' => 300 );
3965 /** @} */ # end of user rights settings
3967 /************************************************************************//**
3968 * @name Proxy scanner settings
3973 * If you enable this, every editor's IP address will be scanned for open HTTP
3976 * Don't enable this. Many sysops will report "hostile TCP port scans" to your
3977 * ISP and ask for your server to be shut down.
3979 * You have been warned.
3981 $wgBlockOpenProxies = false;
3982 /** Port we want to scan for a proxy */
3983 $wgProxyPorts = array( 80, 81, 1080, 3128, 6588, 8000, 8080, 8888, 65506 );
3984 /** Script used to scan */
3985 $wgProxyScriptPath = "$IP/maintenance/proxy_check.php";
3987 $wgProxyMemcExpiry = 86400;
3988 /** This should always be customised in LocalSettings.php */
3989 $wgSecretKey = false;
3990 /** big list of banned IP addresses, in the keys not the values */
3991 $wgProxyList = array();
3993 $wgProxyKey = false;
3995 /** @} */ # end of proxy scanner settings
3997 /************************************************************************//**
3998 * @name Cookie settings
4003 * Default cookie expiration time. Setting to 0 makes all cookies session-only.
4005 $wgCookieExpiration = 180*86400;
4008 * Set to set an explicit domain on the login cookies eg, "justthis.domain.org"
4009 * or ".any.subdomain.net"
4011 $wgCookieDomain = '';
4015 * Set this variable if you want to restrict cookies to a certain path within
4016 * the domain specified by $wgCookieDomain.
4018 $wgCookiePath = '/';
4021 * Whether the "secure" flag should be set on the cookie. This can be:
4022 * - true: Set secure flag
4023 * - false: Don't set secure flag
4024 * - "detect": Set the secure flag if $wgServer is set to an HTTPS URL
4026 $wgCookieSecure = 'detect';
4029 * By default, MediaWiki checks if the client supports cookies during the
4030 * login process, so that it can display an informative error message if
4031 * cookies are disabled. Set this to true if you want to disable this cookie
4034 $wgDisableCookieCheck = false;
4037 * Cookies generated by MediaWiki have names starting with this prefix. Set it
4038 * to a string to use a custom prefix. Setting it to false causes the database
4039 * name to be used as a prefix.
4041 $wgCookiePrefix = false;
4044 * Set authentication cookies to HttpOnly to prevent access by JavaScript,
4045 * in browsers that support this feature. This can mitigates some classes of
4048 $wgCookieHttpOnly = true;
4051 * If the requesting browser matches a regex in this blacklist, we won't
4052 * send it cookies with HttpOnly mode, even if $wgCookieHttpOnly is on.
4054 $wgHttpOnlyBlacklist = array(
4055 // Internet Explorer for Mac; sometimes the cookies work, sometimes
4056 // they don't. It's difficult to predict, as combinations of path
4057 // and expiration options affect its parsing.
4058 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
4061 /** A list of cookies that vary the cache (for use by extensions) */
4062 $wgCacheVaryCookies = array();
4064 /** Override to customise the session name */
4065 $wgSessionName = false;
4067 /** @} */ # end of cookie settings }
4069 /************************************************************************//**
4070 * @name LaTeX (mathematical formulas)
4075 * To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory of
4076 * the MediaWiki package and have latex, dvips, gs (ghostscript), andconvert
4077 * (ImageMagick) installed and available in the PATH.
4078 * Please see math/README for more information.
4082 /* @} */ # end LaTeX }
4084 /************************************************************************//**
4085 * @name Profiling, testing and debugging
4087 * To enable profiling, edit StartProfiler.php
4093 * Filename for debug logging. See http://www.mediawiki.org/wiki/How_to_debug
4094 * The debug log file should be not be publicly accessible if it is used, as it
4095 * may contain private data.
4097 $wgDebugLogFile = '';
4100 * Prefix for debug log lines
4102 $wgDebugLogPrefix = '';
4105 * If true, instead of redirecting, show a page with a link to the redirect
4106 * destination. This allows for the inspection of PHP error messages, and easy
4107 * resubmission of form data. For developer use only.
4109 $wgDebugRedirects = false;
4112 * If true, log debugging data from action=raw and load.php.
4113 * This is normally false to avoid overlapping debug entries due to gen=css and
4116 $wgDebugRawPage = false;
4119 * Send debug data to an HTML comment in the output.
4121 * This may occasionally be useful when supporting a non-technical end-user. It's
4122 * more secure than exposing the debug log file to the web, since the output only
4123 * contains private data for the current user. But it's not ideal for development
4124 * use since data is lost on fatal errors and redirects.
4126 $wgDebugComments = false;
4129 * Extensive database transaction state debugging
4131 $wgDebugDBTransactions = false;
4134 * Write SQL queries to the debug log
4136 $wgDebugDumpSql = false;
4139 * Set to an array of log group keys to filenames.
4140 * If set, wfDebugLog() output for that group will go to that file instead
4141 * of the regular $wgDebugLogFile. Useful for enabling selective logging
4144 $wgDebugLogGroups = array();
4147 * Display debug data at the bottom of the main content area.
4149 * Useful for developers and technical users trying to working on a closed wiki.
4151 $wgShowDebug = false;
4154 * Prefix debug messages with relative timestamp. Very-poor man's profiler.
4155 * Since 1.19 also includes memory usage.
4157 $wgDebugTimestamps = false;
4160 * Print HTTP headers for every request in the debug information.
4162 $wgDebugPrintHttpHeaders = true;
4165 * Show the contents of $wgHooks in Special:Version
4167 $wgSpecialVersionShowHooks = false;
4170 * Whether to show "we're sorry, but there has been a database error" pages.
4171 * Displaying errors aids in debugging, but may display information useful
4174 $wgShowSQLErrors = false;
4177 * If set to true, uncaught exceptions will print a complete stack trace
4178 * to output. This should only be used for debugging, as it may reveal
4179 * private information in function parameters due to PHP's backtrace
4182 $wgShowExceptionDetails = false;
4185 * If true, show a backtrace for database errors
4187 $wgShowDBErrorBacktrace = false;
4190 * If true, send the exception backtrace to the error log
4192 $wgLogExceptionBacktrace = true;
4195 * Expose backend server host names through the API and various HTML comments
4197 $wgShowHostnames = false;
4200 * Override server hostname detection with a hardcoded value.
4201 * Should be a string, default false.
4204 $wgOverrideHostname = false;
4207 * If set to true MediaWiki will throw notices for some possible error
4208 * conditions and for deprecated functions.
4210 $wgDevelopmentWarnings = false;
4213 * Release limitation to wfDeprecated warnings, if set to a release number
4214 * development warnings will not be generated for deprecations added in releases
4217 $wgDeprecationReleaseLimit = false;
4219 /** Only record profiling info for pages that took longer than this */
4220 $wgProfileLimit = 0.0;
4222 /** Don't put non-profiling info into log file */
4223 $wgProfileOnly = false;
4226 * Log sums from profiling into "profiling" table in db.
4228 * You have to create a 'profiling' table in your database before using
4229 * this feature, see maintenance/archives/patch-profiling.sql
4231 * To enable profiling, edit StartProfiler.php
4233 $wgProfileToDatabase = false;
4235 /** If true, print a raw call tree instead of per-function report */
4236 $wgProfileCallTree = false;
4238 /** Should application server host be put into profiling table */
4239 $wgProfilePerHost = false;
4242 * Host for UDP profiler.
4244 * The host should be running a daemon which can be obtained from MediaWiki
4245 * Subversion at: http://svn.wikimedia.org/svnroot/mediawiki/trunk/udpprofile
4247 $wgUDPProfilerHost = '127.0.0.1';
4250 * Port for UDP profiler.
4251 * @see $wgUDPProfilerHost
4253 $wgUDPProfilerPort = '3811';
4255 /** Detects non-matching wfProfileIn/wfProfileOut calls */
4256 $wgDebugProfiling = false;
4258 /** Output debug message on every wfProfileIn/wfProfileOut */
4259 $wgDebugFunctionEntry = false;
4262 * Destination for wfIncrStats() data...
4263 * 'cache' to go into the system cache, if enabled (memcached)
4264 * 'udp' to be sent to the UDP profiler (see $wgUDPProfilerHost)
4267 $wgStatsMethod = 'cache';
4270 * When $wgStatsMethod is 'udp', setting this to a string allows statistics to
4271 * be aggregated over more than one wiki. The string will be used in place of
4272 * the DB name in outgoing UDP packets. If this is set to false, the DB name
4275 $wgAggregateStatsID = false;
4277 /** Whereas to count the number of time an article is viewed.
4278 * Does not work if pages are cached (for example with squid).
4280 $wgDisableCounters = false;
4283 * Set this to an integer to only do synchronous site_stats updates
4284 * one every *this many* updates. The other requests go into pending
4285 * delta values in $wgMemc. Make sure that $wgMemc is a global cache.
4286 * If set to -1, updates *only* go to $wgMemc (useful for daemons).
4288 $wgSiteStatsAsyncFactor = false;
4291 * Parser test suite files to be run by parserTests.php when no specific
4292 * filename is passed to it.
4294 * Extensions may add their own tests to this array, or site-local tests
4295 * may be added via LocalSettings.php
4299 $wgParserTestFiles = array(
4300 "$IP/tests/parser/parserTests.txt",
4301 "$IP/tests/parser/extraParserTests.txt"
4305 * If configured, specifies target CodeReview installation to send test
4306 * result data from 'parserTests.php --upload'
4308 * Something like this:
4309 * $wgParserTestRemote = array(
4310 * 'api-url' => 'http://www.mediawiki.org/w/api.php',
4311 * 'repo' => 'MediaWiki',
4312 * 'suite' => 'ParserTests',
4313 * 'path' => '/trunk/phase3', // not used client-side; for reference
4314 * 'secret' => 'qmoicj3mc4mcklmqw', // Shared secret used in HMAC validation
4317 $wgParserTestRemote = false;
4320 * Allow running of javascript test suites via [[Special:JavaScriptTest]] (such as QUnit).
4322 $wgEnableJavaScriptTest = false;
4325 * Configuration for javascript testing.
4327 $wgJavaScriptTestConfig = array(
4329 // Page where documentation can be found relevant to the QUnit test suite being ran.
4330 // Used in the intro paragraph on [[Special:JavaScriptTest/qunit]] for the
4331 // documentation link in the "javascripttest-qunit-intro" message.
4332 'documentation' => '//www.mediawiki.org/wiki/Manual:JavaScript_unit_testing',
4333 // If you are submitting the QUnit test suite to a TestSwarm instance,
4334 // point this to the "inject.js" script of that instance. This is was registers
4335 // the QUnit hooks to extract the test results and push them back up into the
4336 // TestSwarm database.
4337 // @example 'http://localhost/testswarm/js/inject.js'
4338 // @example '//integration.mediawiki.org/testswarm/js/inject.js'
4339 'testswarm-injectjs' => false,
4345 * Overwrite the caching key prefix with custom value.
4348 $wgCachePrefix = false;
4351 * Display the new debugging toolbar. This also enables profiling on database
4352 * queries and other useful output.
4353 * Will disable file cache.
4357 $wgDebugToolbar = false;
4359 /** @} */ # end of profiling, testing and debugging }
4361 /************************************************************************//**
4367 * Set this to true to disable the full text search feature.
4369 $wgDisableTextSearch = false;
4372 * Set to true to have nicer highligted text in search results,
4373 * by default off due to execution overhead
4375 $wgAdvancedSearchHighlighting = false;
4378 * Regexp to match word boundaries, defaults for non-CJK languages
4379 * should be empty for CJK since the words are not separate
4381 $wgSearchHighlightBoundaries = '[\p{Z}\p{P}\p{C}]';
4384 * Set to true to have the search engine count total
4385 * search matches to present in the Special:Search UI.
4386 * Not supported by every search engine shipped with MW.
4388 * This could however be slow on larger wikis, and is pretty flaky
4389 * with the current title vs content split. Recommend avoiding until
4390 * that's been worked out cleanly; but this may aid in testing the
4391 * search UI and API to confirm that the result count works.
4393 $wgCountTotalSearchHits = false;
4396 * Template for OpenSearch suggestions, defaults to API action=opensearch
4398 * Sites with heavy load would tipically have these point to a custom
4399 * PHP wrapper to avoid firing up mediawiki for every keystroke
4401 * Placeholders: {searchTerms}
4404 $wgOpenSearchTemplate = false;
4407 * Enable suggestions while typing in search boxes
4408 * (results are passed around in OpenSearch format)
4409 * Requires $wgEnableOpenSearchSuggest = true;
4411 $wgEnableMWSuggest = false;
4414 * Enable OpenSearch suggestions requested by MediaWiki. Set this to
4415 * false if you've disabled MWSuggest or another suggestion script and
4416 * want reduce load caused by cached scripts pulling suggestions.
4418 $wgEnableOpenSearchSuggest = true;
4421 * Expiry time for search suggestion responses
4423 $wgSearchSuggestCacheExpiry = 1200;
4426 * Template for internal MediaWiki suggestion engine, defaults to API action=opensearch
4428 * Placeholders: {searchTerms}, {namespaces}, {dbname}
4431 $wgMWSuggestTemplate = false;
4434 * If you've disabled search semi-permanently, this also disables updates to the
4435 * table. If you ever re-enable, be sure to rebuild the search table.
4437 $wgDisableSearchUpdate = false;
4440 * List of namespaces which are searched by default. Example:
4443 * $wgNamespacesToBeSearchedDefault[NS_MAIN] = true;
4444 * $wgNamespacesToBeSearchedDefault[NS_PROJECT] = true;
4447 $wgNamespacesToBeSearchedDefault = array(
4452 * Namespaces to be searched when user clicks the "Help" tab
4455 * Same format as $wgNamespacesToBeSearchedDefault
4457 $wgNamespacesToBeSearchedHelp = array(
4463 * If set to true the 'searcheverything' preference will be effective only for logged-in users.
4464 * Useful for big wikis to maintain different search profiles for anonymous and logged-in users.
4467 $wgSearchEverythingOnlyLoggedIn = false;
4470 * Disable the internal MySQL-based search, to allow it to be
4471 * implemented by an extension instead.
4473 $wgDisableInternalSearch = false;
4476 * Set this to a URL to forward search requests to some external location.
4477 * If the URL includes '$1', this will be replaced with the URL-encoded
4480 * For example, to forward to Google you'd have something like:
4481 * $wgSearchForwardUrl = 'http://www.google.com/search?q=$1' .
4482 * '&domains=http://example.com' .
4483 * '&sitesearch=http://example.com' .
4484 * '&ie=utf-8&oe=utf-8';
4486 $wgSearchForwardUrl = null;
4489 * Search form behavior
4490 * true = use Go & Search buttons
4491 * false = use Go button & Advanced search link
4493 $wgUseTwoButtonsSearchForm = true;
4496 * Array of namespaces to generate a Google sitemap for when the
4497 * maintenance/generateSitemap.php script is run, or false if one is to be ge-
4498 * nerated for all namespaces.
4500 $wgSitemapNamespaces = false;
4503 * Custom namespace priorities for sitemaps. Setting this will allow you to
4504 * set custom priorities to namsepaces when sitemaps are generated using the
4505 * maintenance/generateSitemap.php script.
4507 * This should be a map of namespace IDs to priority
4509 * $wgSitemapNamespacesPriorities = array(
4514 $wgSitemapNamespacesPriorities = false;
4517 * If true, searches for IP addresses will be redirected to that IP's
4518 * contributions page. E.g. searching for "1.2.3.4" will redirect to
4519 * [[Special:Contributions/1.2.3.4]]
4521 $wgEnableSearchContributorsByIP = true;
4523 /** @} */ # end of search settings
4525 /************************************************************************//**
4526 * @name Edit user interface
4531 * Path to the GNU diff3 utility. If the file doesn't exist, edit conflicts will
4532 * fall back to the old behaviour (no merging).
4534 $wgDiff3 = '/usr/bin/diff3';
4537 * Path to the GNU diff utility.
4539 $wgDiff = '/usr/bin/diff';
4542 * Which namespaces have special treatment where they should be preview-on-open
4543 * Internaly only Category: pages apply, but using this extensions (e.g. Semantic MediaWiki)
4544 * can specify namespaces of pages they have special treatment for
4546 $wgPreviewOnOpenNamespaces = array(
4551 * Activate external editor interface for files and pages
4552 * See http://www.mediawiki.org/wiki/Manual:External_editors
4554 $wgUseExternalEditor = true;
4556 /** Go button goes straight to the edit screen if the article doesn't exist. */
4557 $wgGoToEdit = false;
4560 * Enable the UniversalEditButton for browsers that support it
4561 * (currently only Firefox with an extension)
4562 * See http://universaleditbutton.org for more background information
4564 $wgUniversalEditButton = true;
4567 * If user doesn't specify any edit summary when making a an edit, MediaWiki
4568 * will try to automatically create one. This feature can be disabled by set-
4569 * ting this variable false.
4571 $wgUseAutomaticEditSummaries = true;
4573 /** @} */ # end edit UI }
4575 /************************************************************************//**
4577 * See also $wgSiteNotice
4582 * @cond file_level_code
4583 * Set $wgCommandLineMode if it's not set already, to avoid notices
4585 if( !isset( $wgCommandLineMode ) ) {
4586 $wgCommandLineMode = false;
4590 /** For colorized maintenance script output, is your terminal background dark ? */
4591 $wgCommandLineDarkBg = false;
4594 * Array for extensions to register their maintenance scripts with the
4595 * system. The key is the name of the class and the value is the full
4598 $wgMaintenanceScripts = array();
4601 * Set this to a string to put the wiki into read-only mode. The text will be
4602 * used as an explanation to users.
4604 * This prevents most write operations via the web interface. Cache updates may
4605 * still be possible. To prevent database writes completely, use the read_only
4611 * If this lock file exists (size > 0), the wiki will be forced into read-only mode.
4612 * Its contents will be shown to users as part of the read-only warning
4615 * Will default to "{$wgUploadDirectory}/lock_yBgMBwiR" in Setup.php
4617 $wgReadOnlyFile = false;
4620 * When you run the web-based upgrade utility, it will tell you what to set
4621 * this to in order to authorize the upgrade process. It will subsequently be
4622 * used as a password, to authorize further upgrades.
4624 * For security, do not set this to a guessable string. Use the value supplied
4625 * by the install/upgrade process. To cause the upgrader to generate a new key,
4626 * delete the old key from LocalSettings.php.
4628 $wgUpgradeKey = false;
4631 * Map GIT repository URLs to viewer URLs to provide links in Special:Version
4633 * Key is a pattern passed to preg_match() and preg_replace(),
4634 * without the delimiters (which are #) and must match the whole URL.
4635 * The value is the replacement for the key (it can contain $1, etc.)
4636 * %h will be replaced by the short SHA-1 (7 first chars) and %H by the
4637 * full SHA-1 of the HEAD revision.
4639 $wgGitRepositoryViewers = array(
4640 'https://gerrit.wikimedia.org/r/p/(.*)' => 'https://gerrit.wikimedia.org/r/gitweb?p=$1;h=%H',
4641 'ssh://(?:[a-z0-9_]+@)?gerrit.wikimedia.org:29418/(.*)' => 'https://gerrit.wikimedia.org/r/gitweb?p=$1;h=%H',
4644 /** @} */ # End of maintenance }
4646 /************************************************************************//**
4647 * @name Recent changes, new pages, watchlist and history
4652 * Recentchanges items are periodically purged; entries older than this many
4654 * Default: 13 weeks = about three months
4656 $wgRCMaxAge = 13 * 7 * 24 * 3600;
4659 * Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers
4660 * higher than what will be stored. Note that this is disabled by default
4661 * because we sometimes do have RC data which is beyond the limit for some
4662 * reason, and some users may use the high numbers to display that data which
4665 $wgRCFilterByAge = false;
4668 * List of Days and Limits options to list in the Special:Recentchanges and
4669 * Special:Recentchangeslinked pages.
4671 $wgRCLinkLimits = array( 50, 100, 250, 500 );
4672 $wgRCLinkDays = array( 1, 3, 7, 14, 30 );
4675 * Send recent changes updates via UDP. The updates will be formatted for IRC.
4676 * Set this to the IP address of the receiver.
4678 $wgRC2UDPAddress = false;
4681 * Port number for RC updates
4683 $wgRC2UDPPort = false;
4686 * Prefix to prepend to each UDP packet.
4687 * This can be used to identify the wiki. A script is available called
4688 * mxircecho.py which listens on a UDP port, and uses a prefix ending in a
4689 * tab to identify the IRC channel to send the log line to.
4691 $wgRC2UDPPrefix = '';
4694 * If this is set to true, $wgLocalInterwiki will be prepended to links in the
4695 * IRC feed. If this is set to a string, that string will be used as the prefix.
4697 $wgRC2UDPInterwikiPrefix = false;
4700 * Set to true to omit "bot" edits (by users with the bot permission) from the
4703 $wgRC2UDPOmitBots = false;
4706 * Enable user search in Special:Newpages
4707 * This is really a temporary hack around an index install bug on some Wikipedias.
4708 * Kill it once fixed.
4710 $wgEnableNewpagesUserFilter = true;
4712 /** Use RC Patrolling to check for vandalism */
4713 $wgUseRCPatrol = true;
4715 /** Use new page patrolling to check new pages on Special:Newpages */
4716 $wgUseNPPatrol = true;
4718 /** Provide syndication feeds (RSS, Atom) for, e.g., Recentchanges, Newpages */
4721 /** Set maximum number of results to return in syndication feeds (RSS, Atom) for
4722 * eg Recentchanges, Newpages. */
4725 /** _Minimum_ timeout for cached Recentchanges feed, in seconds.
4726 * A cached version will continue to be served out even if changes
4727 * are made, until this many seconds runs out since the last render.
4729 * If set to 0, feed caching is disabled. Use this for debugging only;
4730 * feed generation can be pretty slow with diffs.
4732 $wgFeedCacheTimeout = 60;
4734 /** When generating Recentchanges RSS/Atom feed, diffs will not be generated for
4735 * pages larger than this size. */
4736 $wgFeedDiffCutoff = 32768;
4738 /** Override the site's default RSS/ATOM feed for recentchanges that appears on
4739 * every page. Some sites might have a different feed they'd like to promote
4740 * instead of the RC feed (maybe like a "Recent New Articles" or "Breaking news" one).
4741 * Ex: $wgSiteFeed['format'] = "http://example.com/somefeed.xml"; Format can be one
4742 * of either 'rss' or 'atom'.
4744 $wgOverrideSiteFeed = array();
4747 * Available feeds objects
4748 * Should probably only be defined when a page is syndicated ie when
4749 * $wgOut->isSyndicated() is true
4751 $wgFeedClasses = array(
4753 'atom' => 'AtomFeed',
4757 * Which feed types should we provide by default? This can include 'rss',
4758 * 'atom', neither, or both.
4760 $wgAdvertisedFeedTypes = array( 'atom' );
4762 /** Show watching users in recent changes, watchlist and page history views */
4763 $wgRCShowWatchingUsers = false; # UPO
4764 /** Show watching users in Page views */
4765 $wgPageShowWatchingUsers = false;
4766 /** Show the amount of changed characters in recent changes */
4767 $wgRCShowChangedSize = true;
4770 * If the difference between the character counts of the text
4771 * before and after the edit is below that value, the value will be
4772 * highlighted on the RC page.
4774 $wgRCChangedSizeThreshold = 500;
4777 * Show "Updated (since my last visit)" marker in RC view, watchlist and history
4778 * view for watched pages with new changes */
4779 $wgShowUpdatedMarker = true;
4782 * Disable links to talk pages of anonymous users (IPs) in listings on special
4783 * pages like page history, Special:Recentchanges, etc.
4785 $wgDisableAnonTalk = false;
4788 * Enable filtering of categories in Recentchanges
4790 $wgAllowCategorizedRecentChanges = false;
4793 * Allow filtering by change tag in recentchanges, history, etc
4794 * Has no effect if no tags are defined in valid_tag.
4796 $wgUseTagFilter = true;
4798 /** @} */ # end RC/watchlist }
4800 /************************************************************************//**
4801 * @name Copyright and credits settings
4806 * Override for copyright metadata.
4808 * This is the name of the page containing information about the wiki's copyright status,
4809 * which will be added as a link in the footer if it is specified. It overrides
4810 * $wgRightsUrl if both are specified.
4812 $wgRightsPage = null;
4815 * Set this to specify an external URL containing details about the content license used on your wiki.
4816 * If $wgRightsPage is set then this setting is ignored.
4818 $wgRightsUrl = null;
4821 * If either $wgRightsUrl or $wgRightsPage is specified then this variable gives the text for the link.
4822 * If using $wgRightsUrl then this value must be specified. If using $wgRightsPage then the name of the
4823 * page will also be used as the link if this variable is not set.
4825 $wgRightsText = null;
4828 * Override for copyright metadata.
4830 $wgRightsIcon = null;
4833 * Set to an array of metadata terms. Else they will be loaded based on $wgRightsUrl
4835 $wgLicenseTerms = false;
4838 * Set this to some HTML to override the rights icon with an arbitrary logo
4839 * @deprecated since 1.18 Use $wgFooterIcons['copyright']['copyright']
4841 $wgCopyrightIcon = null;
4843 /** Set this to true if you want detailed copyright information forms on Upload. */
4844 $wgUseCopyrightUpload = false;
4847 * Set this to the number of authors that you want to be credited below an
4848 * article text. Set it to zero to hide the attribution block, and a negative
4849 * number (like -1) to show all authors. Note that this will require 2-3 extra
4850 * database hits, which can have a not insignificant impact on performance for
4855 /** If there are more than $wgMaxCredits authors, show $wgMaxCredits of them.
4856 * Otherwise, link to a separate credits page. */
4857 $wgShowCreditsIfMax = true;
4859 /** @} */ # end of copyright and credits settings }
4861 /************************************************************************//**
4862 * @name Import / Export
4867 * List of interwiki prefixes for wikis we'll accept as sources for
4868 * Special:Import (for sysops). Since complete page history can be imported,
4869 * these should be 'trusted'.
4871 * If a user has the 'import' permission but not the 'importupload' permission,
4872 * they will only be able to run imports through this transwiki interface.
4874 $wgImportSources = array();
4877 * Optional default target namespace for interwiki imports.
4878 * Can use this to create an incoming "transwiki"-style queue.
4879 * Set to numeric key, not the name.
4881 * Users may override this in the Special:Import dialog.
4883 $wgImportTargetNamespace = null;
4886 * If set to false, disables the full-history option on Special:Export.
4887 * This is currently poorly optimized for long edit histories, so is
4888 * disabled on Wikimedia's sites.
4890 $wgExportAllowHistory = true;
4893 * If set nonzero, Special:Export requests for history of pages with
4894 * more revisions than this will be rejected. On some big sites things
4895 * could get bogged down by very very long pages.
4897 $wgExportMaxHistory = 0;
4900 * Return distinct author list (when not returning full history)
4902 $wgExportAllowListContributors = false;
4905 * If non-zero, Special:Export accepts a "pagelink-depth" parameter
4906 * up to this specified level, which will cause it to include all
4907 * pages linked to from the pages you specify. Since this number
4908 * can become *insanely large* and could easily break your wiki,
4909 * it's disabled by default for now.
4911 * There's a HARD CODED limit of 5 levels of recursion to prevent a
4912 * crazy-big export from being done by someone setting the depth
4913 * number too high. In other words, last resort safety net.
4915 $wgExportMaxLinkDepth = 0;
4918 * Whether to allow the "export all pages in namespace" option
4920 $wgExportFromNamespaces = false;
4923 * Whether to allow exporting the entire wiki into a single file
4925 $wgExportAllowAll = false;
4927 /** @} */ # end of import/export }
4929 /*************************************************************************//**
4935 * A list of callback functions which are called once MediaWiki is fully initialised
4937 $wgExtensionFunctions = array();
4940 * Extension messages files.
4942 * Associative array mapping extension name to the filename where messages can be
4943 * found. The file should contain variable assignments. Any of the variables
4944 * present in languages/messages/MessagesEn.php may be defined, but $messages
4945 * is the most common.
4947 * Variables defined in extensions will override conflicting variables defined
4951 * $wgExtensionMessagesFiles['ConfirmEdit'] = dirname(__FILE__).'/ConfirmEdit.i18n.php';
4954 $wgExtensionMessagesFiles = array();
4957 * Parser output hooks.
4958 * This is an associative array where the key is an extension-defined tag
4959 * (typically the extension name), and the value is a PHP callback.
4960 * These will be called as an OutputPageParserOutput hook, if the relevant
4961 * tag has been registered with the parser output object.
4963 * Registration is done with $pout->addOutputHook( $tag, $data ).
4965 * The callback has the form:
4966 * function outputHook( $outputPage, $parserOutput, $data ) { ... }
4968 $wgParserOutputHooks = array();
4971 * List of valid skin names.
4972 * The key should be the name in all lower case, the value should be a properly
4973 * cased name for the skin. This value will be prefixed with "Skin" to create the
4974 * class name of the skin to load, and if the skin's class cannot be found through
4975 * the autoloader it will be used to load a .php file by that name in the skins directory.
4976 * The default skins will be added later, by Skin::getSkinNames(). Use
4977 * Skin::getSkinNames() as an accessor if you wish to have access to the full list.
4979 $wgValidSkinNames = array();
4982 * Special page list.
4983 * See the top of SpecialPage.php for documentation.
4985 $wgSpecialPages = array();
4988 * Array mapping class names to filenames, for autoloading.
4990 $wgAutoloadClasses = array();
4993 * An array of extension types and inside that their names, versions, authors,
4994 * urls, descriptions and pointers to localized description msgs. Note that
4995 * the version, url, description and descriptionmsg key can be omitted.
4998 * $wgExtensionCredits[$type][] = array(
4999 * 'name' => 'Example extension',
5001 * 'path' => __FILE__,
5002 * 'author' => 'Foo Barstein',
5003 * 'url' => 'http://wwww.example.com/Example%20Extension/',
5004 * 'description' => 'An example extension',
5005 * 'descriptionmsg' => 'exampleextension-desc',
5009 * Where $type is 'specialpage', 'parserhook', 'variable', 'media' or 'other'.
5010 * Where 'descriptionmsg' can be an array with message key and parameters:
5011 * 'descriptionmsg' => array( 'exampleextension-desc', param1, param2, ... ),
5013 $wgExtensionCredits = array();
5016 * Authentication plugin.
5017 * @var $wgAuth AuthPlugin
5022 * Global list of hooks.
5023 * Add a hook by doing:
5024 * $wgHooks['event_name'][] = $function;
5026 * $wgHooks['event_name'][] = array($function, $data);
5028 * $wgHooks['event_name'][] = array($object, 'method');
5033 * Maps jobs to their handling classes; extensions
5034 * can add to this to provide custom jobs
5036 $wgJobClasses = array(
5037 'refreshLinks' => 'RefreshLinksJob',
5038 'refreshLinks2' => 'RefreshLinksJob2',
5039 'htmlCacheUpdate' => 'HTMLCacheUpdateJob',
5040 'html_cache_update' => 'HTMLCacheUpdateJob', // backwards-compatible
5041 'sendMail' => 'EmaillingJob',
5042 'enotifNotify' => 'EnotifNotifyJob',
5043 'fixDoubleRedirect' => 'DoubleRedirectJob',
5044 'uploadFromUrl' => 'UploadFromUrlJob',
5049 * Jobs that must be explicitly requested, i.e. aren't run by job runners unless special flags are set.
5052 * - Very long-running jobs.
5053 * - Jobs that you would never want to run as part of a page rendering request.
5054 * - Jobs that you want to run on specialized machines ( like transcoding, or a particular
5055 * machine on your cluster has 'outside' web access you could restrict uploadFromUrl )
5057 $wgJobTypesExcludedFromDefaultQueue = array();
5060 * Additional functions to be performed with updateSpecialPages.
5061 * Expensive Querypages are already updated.
5063 $wgSpecialPageCacheUpdates = array(
5064 'Statistics' => array( 'SiteStatsUpdate', 'cacheUpdate' )
5068 * Hooks that are used for outputting exceptions. Format is:
5069 * $wgExceptionHooks[] = $funcname
5071 * $wgExceptionHooks[] = array( $class, $funcname )
5072 * Hooks should return strings or false
5074 $wgExceptionHooks = array();
5077 * Page property link table invalidation lists. When a page property
5078 * changes, this may require other link tables to be updated (eg
5079 * adding __HIDDENCAT__ means the hiddencat tracking category will
5080 * have been added, so the categorylinks table needs to be rebuilt).
5081 * This array can be added to by extensions.
5083 $wgPagePropLinkInvalidations = array(
5084 'hiddencat' => 'categorylinks',
5087 /** @} */ # End extensions }
5089 /*************************************************************************//**
5095 * Use experimental, DMOZ-like category browser
5097 $wgUseCategoryBrowser = false;
5100 * On category pages, show thumbnail gallery for images belonging to that
5101 * category instead of listing them as articles.
5103 $wgCategoryMagicGallery = true;
5106 * Paging limit for categories
5108 $wgCategoryPagingLimit = 200;
5111 * Specify how category names should be sorted, when listed on a category page.
5112 * A sorting scheme is also known as a collation.
5114 * Available values are:
5116 * - uppercase: Converts the category name to upper case, and sorts by that.
5118 * - identity: Does no conversion. Sorts by binary value of the string.
5120 * - uca-default: Provides access to the Unicode Collation Algorithm with
5121 * the default element table. This is a compromise collation which sorts
5122 * all languages in a mediocre way. However, it is better than "uppercase".
5124 * To use the uca-default collation, you must have PHP's intl extension
5125 * installed. See http://php.net/manual/en/intl.setup.php . The details of the
5126 * resulting collation will depend on the version of ICU installed on the
5129 * After you change this, you must run maintenance/updateCollation.php to fix
5130 * the sort keys in the database.
5132 * Extensions can define there own collations by subclassing Collation
5133 * and using the Collation::factory hook.
5135 $wgCategoryCollation = 'uppercase';
5137 /** @} */ # End categories }
5139 /*************************************************************************//**
5145 * The logging system has two levels: an event type, which describes the
5146 * general category and can be viewed as a named subset of all logs; and
5147 * an action, which is a specific kind of event that can exist in that
5150 $wgLogTypes = array(
5165 * This restricts log access to those who have a certain right
5166 * Users without this will not see it in the option menu and can not view it
5167 * Restricted logs are not added to recent changes
5168 * Logs should remain non-transcludable
5169 * Format: logtype => permissiontype
5171 $wgLogRestrictions = array(
5172 'suppress' => 'suppressionlog'
5176 * Show/hide links on Special:Log will be shown for these log types.
5178 * This is associative array of log type => boolean "hide by default"
5180 * See $wgLogTypes for a list of available log types.
5183 * $wgFilterLogTypes => array(
5185 * 'import' => false,
5188 * Will display show/hide links for the move and import logs. Move logs will be
5189 * hidden by default unless the link is clicked. Import logs will be shown by
5190 * default, and hidden when the link is clicked.
5192 * A message of the form log-show-hide-[type] should be added, and will be used
5193 * for the link text.
5195 $wgFilterLogTypes = array(
5200 * Lists the message key string for each log type. The localized messages
5201 * will be listed in the user interface.
5203 * Extensions with custom log types may add to this array.
5205 * Since 1.19, if you follow the naming convention log-name-TYPE,
5206 * where TYPE is your log type, yoy don't need to use this array.
5208 $wgLogNames = array(
5209 '' => 'all-logs-page',
5210 'block' => 'blocklogpage',
5211 'protect' => 'protectlogpage',
5212 'rights' => 'rightslog',
5213 'delete' => 'dellogpage',
5214 'upload' => 'uploadlogpage',
5215 'move' => 'movelogpage',
5216 'import' => 'importlogpage',
5217 'patrol' => 'patrol-log-page',
5218 'merge' => 'mergelog',
5219 'suppress' => 'suppressionlog',
5223 * Lists the message key string for descriptive text to be shown at the
5224 * top of each log type.
5226 * Extensions with custom log types may add to this array.
5228 * Since 1.19, if you follow the naming convention log-description-TYPE,
5229 * where TYPE is your log type, yoy don't need to use this array.
5231 $wgLogHeaders = array(
5232 '' => 'alllogstext',
5233 'block' => 'blocklogtext',
5234 'protect' => 'protectlogtext',
5235 'rights' => 'rightslogtext',
5236 'delete' => 'dellogpagetext',
5237 'upload' => 'uploadlogpagetext',
5238 'move' => 'movelogpagetext',
5239 'import' => 'importlogpagetext',
5240 'patrol' => 'patrol-log-header',
5241 'merge' => 'mergelogpagetext',
5242 'suppress' => 'suppressionlogtext',
5246 * Lists the message key string for formatting individual events of each
5247 * type and action when listed in the logs.
5249 * Extensions with custom log types may add to this array.
5251 $wgLogActions = array(
5252 'block/block' => 'blocklogentry',
5253 'block/unblock' => 'unblocklogentry',
5254 'block/reblock' => 'reblock-logentry',
5255 'protect/protect' => 'protectedarticle',
5256 'protect/modify' => 'modifiedarticleprotection',
5257 'protect/unprotect' => 'unprotectedarticle',
5258 'protect/move_prot' => 'movedarticleprotection',
5259 'rights/rights' => 'rightslogentry',
5260 'rights/autopromote' => 'rightslogentry-autopromote',
5261 'upload/upload' => 'uploadedimage',
5262 'upload/overwrite' => 'overwroteimage',
5263 'upload/revert' => 'uploadedimage',
5264 'import/upload' => 'import-logentry-upload',
5265 'import/interwiki' => 'import-logentry-interwiki',
5266 'merge/merge' => 'pagemerge-logentry',
5267 'suppress/block' => 'blocklogentry',
5268 'suppress/reblock' => 'reblock-logentry',
5272 * The same as above, but here values are names of functions,
5274 * @see LogPage::actionText
5277 $wgLogActionsHandlers = array(
5279 'move/*' => 'MoveLogFormatter',
5280 // delete, restore, revision, event
5281 'delete/*' => 'DeleteLogFormatter',
5282 'suppress/revision' => 'DeleteLogFormatter',
5283 'suppress/event' => 'DeleteLogFormatter',
5284 'suppress/delete' => 'DeleteLogFormatter',
5285 'patrol/patrol' => 'PatrolLogFormatter',
5289 * Maintain a log of newusers at Log/newusers?
5291 $wgNewUserLog = true;
5293 /** @} */ # end logging }
5295 /*************************************************************************//**
5296 * @name Special pages (general and miscellaneous)
5301 * Allow special page inclusions such as {{Special:Allpages}}
5303 $wgAllowSpecialInclusion = true;
5306 * Set this to an array of special page names to prevent
5307 * maintenance/updateSpecialPages.php from updating those pages.
5309 $wgDisableQueryPageUpdate = false;
5312 * List of special pages, followed by what subtitle they should go under
5313 * at Special:SpecialPages
5315 $wgSpecialPageGroups = array(
5316 'DoubleRedirects' => 'maintenance',
5317 'BrokenRedirects' => 'maintenance',
5318 'Lonelypages' => 'maintenance',
5319 'Uncategorizedpages' => 'maintenance',
5320 'Uncategorizedcategories' => 'maintenance',
5321 'Uncategorizedimages' => 'maintenance',
5322 'Uncategorizedtemplates' => 'maintenance',
5323 'Unusedcategories' => 'maintenance',
5324 'Unusedimages' => 'maintenance',
5325 'Protectedpages' => 'maintenance',
5326 'Protectedtitles' => 'maintenance',
5327 'Unusedtemplates' => 'maintenance',
5328 'Withoutinterwiki' => 'maintenance',
5329 'Longpages' => 'maintenance',
5330 'Shortpages' => 'maintenance',
5331 'Ancientpages' => 'maintenance',
5332 'Deadendpages' => 'maintenance',
5333 'Wantedpages' => 'maintenance',
5334 'Wantedcategories' => 'maintenance',
5335 'Wantedfiles' => 'maintenance',
5336 'Wantedtemplates' => 'maintenance',
5337 'Unwatchedpages' => 'maintenance',
5338 'Fewestrevisions' => 'maintenance',
5340 'Userlogin' => 'login',
5341 'Userlogout' => 'login',
5342 'CreateAccount' => 'login',
5344 'Recentchanges' => 'changes',
5345 'Recentchangeslinked' => 'changes',
5346 'Watchlist' => 'changes',
5347 'Newimages' => 'changes',
5348 'Newpages' => 'changes',
5350 'Tags' => 'changes',
5352 'Upload' => 'media',
5353 'Listfiles' => 'media',
5354 'MIMEsearch' => 'media',
5355 'FileDuplicateSearch' => 'media',
5356 'Filepath' => 'media',
5358 'Listusers' => 'users',
5359 'Activeusers' => 'users',
5360 'Listgrouprights' => 'users',
5361 'BlockList' => 'users',
5362 'Contributions' => 'users',
5363 'Emailuser' => 'users',
5364 'Listadmins' => 'users',
5365 'Listbots' => 'users',
5366 'Userrights' => 'users',
5368 'Unblock' => 'users',
5369 'Preferences' => 'users',
5370 'ChangeEmail' => 'users',
5371 'ChangePassword' => 'users',
5372 'DeletedContributions' => 'users',
5373 'PasswordReset' => 'users',
5375 'Mostlinked' => 'highuse',
5376 'Mostlinkedcategories' => 'highuse',
5377 'Mostlinkedtemplates' => 'highuse',
5378 'Mostcategories' => 'highuse',
5379 'Mostimages' => 'highuse',
5380 'Mostrevisions' => 'highuse',
5382 'Allpages' => 'pages',
5383 'Prefixindex' => 'pages',
5384 'Listredirects' => 'pages',
5385 'Categories' => 'pages',
5386 'Disambiguations' => 'pages',
5388 'Randompage' => 'redirects',
5389 'Randomredirect' => 'redirects',
5390 'Mypage' => 'redirects',
5391 'Mytalk' => 'redirects',
5392 'Mycontributions' => 'redirects',
5393 'Search' => 'redirects',
5394 'LinkSearch' => 'redirects',
5396 'ComparePages' => 'pagetools',
5397 'Movepage' => 'pagetools',
5398 'MergeHistory' => 'pagetools',
5399 'Revisiondelete' => 'pagetools',
5400 'Undelete' => 'pagetools',
5401 'Export' => 'pagetools',
5402 'Import' => 'pagetools',
5403 'Whatlinkshere' => 'pagetools',
5405 'Statistics' => 'wiki',
5406 'Version' => 'wiki',
5408 'Unlockdb' => 'wiki',
5409 'Allmessages' => 'wiki',
5410 'Popularpages' => 'wiki',
5412 'Specialpages' => 'other',
5413 'Blockme' => 'other',
5414 'Booksources' => 'other',
5415 'JavaScriptTest' => 'other',
5418 /** Whether or not to sort special pages in Special:Specialpages */
5420 $wgSortSpecialPages = true;
5423 * On Special:Unusedimages, consider images "used", if they are put
5424 * into a category. Default (false) is not to count those as used.
5426 $wgCountCategorizedImagesAsUsed = false;
5429 * Maximum number of links to a redirect page listed on
5430 * Special:Whatlinkshere/RedirectDestination
5432 $wgMaxRedirectLinksRetrieved = 500;
5434 /** @} */ # end special pages }
5436 /*************************************************************************//**
5442 * Array of allowed values for the "title=foo&action=<action>" parameter. Syntax is:
5443 * 'foo' => 'ClassName' Load the specified class which subclasses Action
5444 * 'foo' => true Load the class FooAction which subclasses Action
5445 * If something is specified in the getActionOverrides()
5446 * of the relevant Page object it will be used
5447 * instead of the default class.
5448 * 'foo' => false The action is disabled; show an error message
5449 * Unsetting core actions will probably cause things to complain loudly.
5457 'markpatrolled' => true,
5463 'revisiondelete' => true,
5466 'unprotect' => true,
5473 * Array of disabled article actions, e.g. view, edit, delete, etc.
5474 * @deprecated since 1.18; just set $wgActions['action'] = false instead
5476 $wgDisabledActions = array();
5479 * Allow the "info" action, very inefficient at the moment
5481 $wgAllowPageInfo = false;
5483 /** @} */ # end actions }
5485 /*************************************************************************//**
5486 * @name Robot (search engine crawler) policy
5487 * See also $wgNoFollowLinks.
5492 * Default robot policy. The default policy is to encourage indexing and fol-
5493 * lowing of links. It may be overridden on a per-namespace and/or per-page
5496 $wgDefaultRobotPolicy = 'index,follow';
5499 * Robot policies per namespaces. The default policy is given above, the array
5500 * is made of namespace constants as defined in includes/Defines.php. You can-
5501 * not specify a different default policy for NS_SPECIAL: it is always noindex,
5502 * nofollow. This is because a number of special pages (e.g., ListPages) have
5503 * many permutations of options that display the same data under redundant
5504 * URLs, so search engine spiders risk getting lost in a maze of twisty special
5505 * pages, all alike, and never reaching your actual content.
5508 * $wgNamespaceRobotPolicies = array( NS_TALK => 'noindex' );
5510 $wgNamespaceRobotPolicies = array();
5513 * Robot policies per article. These override the per-namespace robot policies.
5514 * Must be in the form of an array where the key part is a properly canonical-
5515 * ised text form title and the value is a robot policy.
5517 * $wgArticleRobotPolicies = array( 'Main Page' => 'noindex,follow',
5518 * 'User:Bob' => 'index,follow' );
5519 * Example that DOES NOT WORK because the names are not canonical text forms:
5520 * $wgArticleRobotPolicies = array(
5521 * # Underscore, not space!
5522 * 'Main_Page' => 'noindex,follow',
5523 * # "Project", not the actual project name!
5524 * 'Project:X' => 'index,follow',
5525 * # Needs to be "Abc", not "abc" (unless $wgCapitalLinks is false for that namespace)!
5526 * 'abc' => 'noindex,nofollow'
5529 $wgArticleRobotPolicies = array();
5532 * An array of namespace keys in which the __INDEX__/__NOINDEX__ magic words
5533 * will not function, so users can't decide whether pages in that namespace are
5534 * indexed by search engines. If set to null, default to $wgContentNamespaces.
5536 * $wgExemptFromUserRobotsControl = array( NS_MAIN, NS_TALK, NS_PROJECT );
5538 $wgExemptFromUserRobotsControl = null;
5540 /** @} */ # End robot policy }
5542 /************************************************************************//**
5543 * @name AJAX and API
5544 * Note: The AJAX entry point which this section refers to is gradually being
5545 * replaced by the API entry point, api.php. They are essentially equivalent.
5546 * Both of them are used for dynamic client-side features, via XHR.
5551 * Enable the MediaWiki API for convenient access to
5552 * machine-readable data via api.php
5554 * See http://www.mediawiki.org/wiki/API
5556 $wgEnableAPI = true;
5559 * Allow the API to be used to perform write operations
5560 * (page edits, rollback, etc.) when an authorised user
5563 $wgEnableWriteAPI = true;
5566 * API module extensions
5567 * Associative array mapping module name to class name.
5568 * Extension modules may override the core modules.
5570 $wgAPIModules = array();
5571 $wgAPIMetaModules = array();
5572 $wgAPIPropModules = array();
5573 $wgAPIListModules = array();
5576 * Maximum amount of rows to scan in a DB query in the API
5577 * The default value is generally fine
5579 $wgAPIMaxDBRows = 5000;
5582 * The maximum size (in bytes) of an API result.
5583 * Don't set this lower than $wgMaxArticleSize*1024
5585 $wgAPIMaxResultSize = 8388608;
5588 * The maximum number of uncached diffs that can be retrieved in one API
5589 * request. Set this to 0 to disable API diffs altogether
5591 $wgAPIMaxUncachedDiffs = 1;
5594 * Log file or URL (TCP or UDP) to log API requests to, or false to disable
5595 * API request logging
5597 $wgAPIRequestLog = false;
5600 * Set the timeout for the API help text cache. If set to 0, caching disabled
5602 $wgAPICacheHelpTimeout = 60*60;
5605 * Enable AJAX framework
5610 * List of Ajax-callable functions.
5611 * Extensions acting as Ajax callbacks must register here
5613 $wgAjaxExportList = array();
5616 * Enable watching/unwatching pages using AJAX.
5617 * Requires $wgUseAjax to be true too.
5619 $wgAjaxWatch = true;
5622 * Enable AJAX check for file overwrite, pre-upload
5624 $wgAjaxUploadDestCheck = true;
5627 * Enable previewing licences via AJAX. Also requires $wgEnableAPI to be true.
5629 $wgAjaxLicensePreview = true;
5632 * Settings for incoming cross-site AJAX requests:
5633 * Newer browsers support cross-site AJAX when the target resource allows requests
5634 * from the origin domain by the Access-Control-Allow-Origin header.
5635 * This is currently only used by the API (requests to api.php)
5636 * $wgCrossSiteAJAXdomains can be set using a wildcard syntax:
5638 * '*' matches any number of characters
5639 * '?' matches any 1 character
5642 $wgCrossSiteAJAXdomains = array(
5643 'www.mediawiki.org',
5650 $wgCrossSiteAJAXdomains = array();
5653 * Domains that should not be allowed to make AJAX requests,
5654 * even if they match one of the domains allowed by $wgCrossSiteAJAXdomains
5655 * Uses the same syntax as $wgCrossSiteAJAXdomains
5658 $wgCrossSiteAJAXdomainExceptions = array();
5660 /** @} */ # End AJAX and API }
5662 /************************************************************************//**
5663 * @name Shell and process control
5668 * Maximum amount of virtual memory available to shell processes under linux, in KB.
5670 $wgMaxShellMemory = 102400;
5673 * Maximum file size created by shell processes under linux, in KB
5674 * ImageMagick convert for example can be fairly hungry for scratch space
5676 $wgMaxShellFileSize = 102400;
5679 * Maximum CPU time in seconds for shell processes under linux
5681 $wgMaxShellTime = 180;
5684 * Executable path of the PHP cli binary (php/php5). Should be set up on install.
5686 $wgPhpCli = '/usr/bin/php';
5689 * Locale for LC_CTYPE, to work around http://bugs.php.net/bug.php?id=45132
5690 * For Unix-like operating systems, set this to to a locale that has a UTF-8
5691 * character set. Only the character set is relevant.
5693 $wgShellLocale = 'en_US.utf8';
5695 /** @} */ # End shell }
5697 /************************************************************************//**
5703 * Timeout for HTTP requests done internally
5705 $wgHTTPTimeout = 25;
5708 * Timeout for Asynchronous (background) HTTP requests
5710 $wgAsyncHTTPTimeout = 25;
5713 * Proxy to use for CURL requests.
5715 $wgHTTPProxy = false;
5717 /** @} */ # End HTTP client }
5719 /************************************************************************//**
5721 * See also $wgEnotifUseJobQ.
5726 * Number of jobs to perform per request. May be less than one in which case
5727 * jobs are performed probabalistically. If this is zero, jobs will not be done
5728 * during ordinary apache requests. In this case, maintenance/runJobs.php should
5729 * be run periodically.
5734 * Number of rows to update per job
5736 $wgUpdateRowsPerJob = 500;
5739 * Number of rows to update per query
5741 $wgUpdateRowsPerQuery = 100;
5743 /** @} */ # End job queue }
5745 /************************************************************************//**
5746 * @name HipHop compilation
5751 * The build directory for HipHop compilation.
5752 * Defaults to $IP/maintenance/hiphop/build.
5754 $wgHipHopBuildDirectory = false;
5757 * The HipHop build type. Can be either "Debug" or "Release".
5759 $wgHipHopBuildType = 'Debug';
5762 * Number of parallel processes to use during HipHop compilation, or "detect"
5763 * to guess from system properties.
5765 $wgHipHopCompilerProcs = 'detect';
5768 * Filesystem extensions directory. Defaults to $IP/../extensions.
5770 * To compile extensions with HipHop, set $wgExtensionsDirectory correctly,
5771 * and use code like:
5773 * require( MWInit::extensionSetupPath( 'Extension/Extension.php' ) );
5775 * to include the extension setup file from LocalSettings.php. It is not
5776 * necessary to set this variable unless you use MWInit::extensionSetupPath().
5778 $wgExtensionsDirectory = false;
5781 * A list of files that should be compiled into a HipHop build, in addition to
5782 * those listed in $wgAutoloadClasses. Add to this array in an extension setup
5783 * file in order to add files to the build.
5785 * The files listed here must either be either absolute paths under $IP or
5786 * under $wgExtensionsDirectory, or paths relative to the virtual source root
5787 * "$IP/..", i.e. starting with "phase3" for core files, and "extensions" for
5790 $wgCompiledFiles = array();
5792 /** @} */ # End of HipHop compilation }
5795 /************************************************************************//**
5796 * @name Mobile support
5801 * Name of the class used for mobile device detection, must be inherited from
5804 $wgDeviceDetectionClass = 'DeviceDetection';
5806 /** @} */ # End of Mobile support }
5808 /************************************************************************//**
5809 * @name Miscellaneous
5813 /** Name of the external diff engine to use */
5814 $wgExternalDiffEngine = false;
5817 * Disable redirects to special pages and interwiki redirects, which use a 302
5818 * and have no "redirected from" link. Note this is only for articles with #Redirect
5819 * in them. URL's containing a local interwiki prefix (or a non-canonical special
5820 * page name) are still hard redirected regardless of this setting.
5822 $wgDisableHardRedirects = false;
5825 * LinkHolderArray batch size
5828 $wgLinkHolderBatchSize = 1000;
5831 * By default MediaWiki does not register links pointing to same server in externallinks dataset,
5832 * use this value to override:
5834 $wgRegisterInternalExternals = false;
5837 * Maximum number of pages to move at once when moving subpages with a page.
5839 $wgMaximumMovedPages = 100;
5842 * Fix double redirects after a page move.
5843 * Tends to conflict with page move vandalism, use only on a private wiki.
5845 $wgFixDoubleRedirects = false;
5848 * Allow redirection to another page when a user logs in.
5849 * To enable, set to a string like 'Main Page'
5851 $wgRedirectOnLogin = null;
5854 * Configuration for processing pool control, for use in high-traffic wikis.
5855 * An implementation is provided in the PoolCounter extension.
5857 * This configuration array maps pool types to an associative array. The only
5858 * defined key in the associative array is "class", which gives the class name.
5859 * The remaining elements are passed through to the class as constructor
5860 * parameters. Example:
5862 * $wgPoolCounterConf = array( 'ArticleView' => array(
5863 * 'class' => 'PoolCounter_Client',
5864 * 'timeout' => 15, // wait timeout in seconds
5865 * 'workers' => 5, // maximum number of active threads in each pool
5866 * 'maxqueue' => 50, // maximum number of total threads in each pool
5867 * ... any extension-specific options...
5870 $wgPoolCounterConf = null;
5873 * To disable file delete/restore temporarily
5875 $wgUploadMaintenance = false;
5878 * Allows running of selenium tests via maintenance/tests/RunSeleniumTests.php
5880 $wgEnableSelenium = false;
5881 $wgSeleniumTestConfigs = array();
5882 $wgSeleniumConfigFile = null;
5883 $wgDBtestuser = ''; //db user that has permission to create and drop the test databases only
5884 $wgDBtestpassword = '';
5887 * For really cool vim folding this needs to be at the end:
5888 * vim: foldmarker=@{,@} foldmethod=marker