8 * To customize your installation, edit "LocalSettings.php". If you make
9 * changes here, they will be lost on next upgrade of MediaWiki!
11 * Note that since all these string interpolations are expanded
12 * before LocalSettings is included, if you localize something
13 * like $wgScriptPath, you must also localize everything that
16 * Documentation is in the source and on:
17 * http://www.mediawiki.org/wiki/Manual:Configuration_settings
21 * @cond file_level_code
22 * This is not a valid entry point, perform no further processing unless MEDIAWIKI is defined
24 if( !defined( 'MEDIAWIKI' ) ) {
25 echo "This file is part of MediaWiki and is not a valid entry point\n";
29 # Create a site configuration object. Not used for much in a default install
30 if ( !defined( 'MW_COMPILED' ) ) {
31 require_once( "$IP/includes/SiteConfiguration.php" );
33 $wgConf = new SiteConfiguration
;
36 /** MediaWiki version number */
37 $wgVersion = '1.18alpha';
39 /** Name of the site. It must be changed in LocalSettings.php */
40 $wgSitename = 'MediaWiki';
43 * URL of the server. It will be automatically built including https mode.
47 * $wgServer = http://example.com
50 * This is usually detected correctly by MediaWiki. If MediaWiki detects the
51 * wrong server, it will redirect incorrectly after you save a page. In that
52 * case, set this variable to fix it.
56 /** @cond file_level_code */
57 if( isset( $_SERVER['SERVER_NAME'] )
58 # additionially, for requests made directly to an IPv6 address we have
59 # to make sure the server enclose it in either [] or nothing at all
60 && (strpos($_SERVER['SERVER_NAME'], '[')
61 xor strpos( $_SERVER['SERVER_NAME'], ']'))
63 $serverName = $_SERVER['SERVER_NAME'];
64 } elseif( isset( $_SERVER['HOSTNAME'] ) ) {
65 $serverName = $_SERVER['HOSTNAME'];
66 } elseif( isset( $_SERVER['HTTP_HOST'] ) ) {
67 $serverName = $_SERVER['HTTP_HOST'];
68 } elseif( isset( $_SERVER['SERVER_ADDR'] ) ) {
69 $serverName = $_SERVER['SERVER_ADDR'];
71 $serverName = 'localhost';
74 $wgProto = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] == 'on') ?
'https' : 'http';
76 $wgServer = $wgProto.'://' . $serverName;
77 # If the port is a non-standard one, add it to the URL
78 if( isset( $_SERVER['SERVER_PORT'] )
79 && !strpos( $serverName, ':' )
80 && ( ( $wgProto == 'http' && $_SERVER['SERVER_PORT'] != 80 )
81 ||
( $wgProto == 'https' && $_SERVER['SERVER_PORT'] != 443 ) ) ) {
83 $wgServer .= ":" . $_SERVER['SERVER_PORT'];
87 /************************************************************************//**
88 * @name Script path settings
93 * The path we should point to.
94 * It might be a virtual path in case with use apache mod_rewrite for example.
96 * This *needs* to be set correctly.
98 * Other paths will be set to defaults based on it unless they are directly
99 * set in LocalSettings.php
101 $wgScriptPath = '/wiki';
104 * Whether to support URLs like index.php/Page_title These often break when PHP
105 * is set up in CGI mode. PATH_INFO *may* be correct if cgi.fix_pathinfo is set,
106 * but then again it may not; lighttpd converts incoming path data to lowercase
107 * on systems with case-insensitive filesystems, and there have been reports of
108 * problems on Apache as well.
110 * To be safe we'll continue to keep it off by default.
112 * Override this to false if $_SERVER['PATH_INFO'] contains unexpectedly
113 * incorrect garbage, or to true if it is really correct.
115 * The default $wgArticlePath will be set based on this value at runtime, but if
116 * you have customized it, having this incorrectly set to true can cause
117 * redirect loops when "pretty URLs" are used.
120 ( strpos( php_sapi_name(), 'cgi' ) === false ) &&
121 ( strpos( php_sapi_name(), 'apache2filter' ) === false ) &&
122 ( strpos( php_sapi_name(), 'isapi' ) === false );
125 * The extension to append to script names by default. This can either be .php
128 * Some hosting providers use PHP 4 for *.php files, and PHP 5 for *.php5. This
129 * variable is provided to support those providers.
131 $wgScriptExtension = '.php';
134 * The URL path to index.php.
136 * Defaults to "{$wgScriptPath}/index{$wgScriptExtension}".
141 * The URL path to redirect.php. This is a script that is used by the Nostalgia
144 * Defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}".
146 $wgRedirectScript = false; ///< defaults to
149 * The URL path to load.php.
151 * Defaults to "{$wgScriptPath}/load{$wgScriptExtension}".
153 $wgLoadScript = false;
157 /************************************************************************//**
158 * @name URLs and file paths
160 * These various web and file path variables are set to their defaults
161 * in Setup.php if they are not explicitly set from LocalSettings.php.
162 * If you do override them, be sure to set them all!
164 * These will relatively rarely need to be set manually, unless you are
165 * splitting style sheets or images outside the main document root.
167 * In this section, a "path" is usually a host-relative URL, i.e. a URL without
168 * the host part, that starts with a slash. In most cases a full URL is also
169 * acceptable. A "directory" is a local file path.
171 * In both paths and directories, trailing slashes should not be included.
177 * The URL path of the skins directory. Defaults to "{$wgScriptPath}/skins"
179 $wgStylePath = false;
180 $wgStyleSheetPath = &$wgStylePath;
183 * The URL path of the skins directory. Should not point to an external domain.
184 * Defaults to "{$wgScriptPath}/skins".
186 $wgLocalStylePath = false;
189 * The URL path of the extensions directory.
190 * Defaults to "{$wgScriptPath}/extensions".
193 $wgExtensionAssetsPath = false;
196 * Filesystem stylesheets directory. Defaults to "{$IP}/skins"
198 $wgStyleDirectory = false;
201 * The URL path for primary article page views. This path should contain $1,
202 * which is replaced by the article title.
204 * Defaults to "{$wgScript}/$1" or "{$wgScript}?title=$1", depending on
207 $wgArticlePath = false;
210 * The URL path for the images directory. Defaults to "{$wgScriptPath}/images"
212 $wgUploadPath = false;
215 * The filesystem path of the images directory. Defaults to "{$IP}/images".
217 $wgUploadDirectory = false;
220 * The URL path of the wiki logo. The logo size should be 135x135 pixels.
221 * Defaults to "{$wgStylePath}/common/images/wiki.png".
226 * The URL path of the shortcut icon.
228 $wgFavicon = '/favicon.ico';
231 * The URL path of the icon for iPhone and iPod Touch web app bookmarks.
232 * Defaults to no icon.
234 $wgAppleTouchIcon = false;
237 * The local filesystem path to a temporary directory. This is not required to
240 * Defaults to "{$wgUploadDirectory}/tmp".
242 $wgTmpDirectory = false;
245 * If set, this URL is added to the start of $wgUploadPath to form a complete
248 $wgUploadBaseUrl = "";
251 * To enable remote on-demand scaling, set this to the thumbnail base URL.
252 * Full thumbnail URL will be like $wgUploadStashScalerBaseUrl/e/e6/Foo.jpg/123px-Foo.jpg
253 * where 'e6' are the first two characters of the MD5 hash of the file name.
254 * If $wgUploadStashScalerBaseUrl is set to false, thumbs are rendered locally as needed.
256 $wgUploadStashScalerBaseUrl = false;
259 * To set 'pretty' URL paths for actions other than
260 * plain page views, add to this array. For instance:
261 * 'edit' => "$wgScriptPath/edit/$1"
263 * There must be an appropriate script or rewrite rule
264 * in place to handle these URLs.
266 $wgActionPaths = array();
270 /************************************************************************//**
271 * @name Files and file uploads
275 /** Uploads have to be specially set up to be secure */
276 $wgEnableUploads = false;
278 /** Allows to move images and other media files */
279 $wgAllowImageMoving = true;
282 * These are additional characters that should be replaced with '-' in file names
284 $wgIllegalFileChars = ":";
287 * @deprecated use $wgDeletedDirectory
289 $wgFileStore = array();
292 * What directory to place deleted uploads in
294 $wgDeletedDirectory = false; // Defaults to $wgUploadDirectory/deleted
297 * Set this to true if you use img_auth and want the user to see details on why access failed.
299 $wgImgAuthDetails = false;
302 * If this is enabled, img_auth.php will not allow image access unless the wiki
303 * is private. This improves security when image uploads are hosted on a
306 $wgImgAuthPublicTest = true;
309 * File repository structures
311 * $wgLocalFileRepo is a single repository structure, and $wgForeignFileRepos is
312 * an array of such structures. Each repository structure is an associative
313 * array of properties configuring the repository.
315 * Properties required for all repos:
316 * - class The class name for the repository. May come from the core or an extension.
317 * The core repository classes are LocalRepo, ForeignDBRepo, FSRepo.
319 * - name A unique name for the repository.
321 * For most core repos:
322 * - url Base public URL
323 * - hashLevels The number of directory levels for hash-based division of files
324 * - thumbScriptUrl The URL for thumb.php (optional, not recommended)
325 * - transformVia404 Whether to skip media file transformation on parse and rely on a 404
327 * - initialCapital Equivalent to $wgCapitalLinks (or $wgCapitalLinkOverrides[NS_FILE],
328 * determines whether filenames implicitly start with a capital letter.
329 * The current implementation may give incorrect description page links
330 * when the local $wgCapitalLinks and initialCapital are mismatched.
331 * - pathDisclosureProtection
332 * May be 'paranoid' to remove all parameters from error messages, 'none' to
333 * leave the paths in unchanged, or 'simple' to replace paths with
334 * placeholders. Default for LocalRepo is 'simple'.
335 * - fileMode This allows wikis to set the file mode when uploading/moving files. Default
337 * - directory The local filesystem directory where public files are stored. Not used for
339 * - thumbDir The base thumbnail directory. Defaults to <directory>/thumb.
340 * - thumbUrl The base thumbnail URL. Defaults to <url>/thumb.
343 * These settings describe a foreign MediaWiki installation. They are optional, and will be ignored
344 * for local repositories:
345 * - descBaseUrl URL of image description pages, e.g. http://en.wikipedia.org/wiki/File:
346 * - scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g.
347 * http://en.wikipedia.org/w
348 * - scriptExtension Script extension of the MediaWiki installation, equivalent to
349 * $wgScriptExtension, e.g. .php5 defaults to .php
351 * - articleUrl Equivalent to $wgArticlePath, e.g. http://en.wikipedia.org/wiki/$1
352 * - fetchDescription Fetch the text of the remote file description page. Equivalent to
353 * $wgFetchCommonsDescriptions.
356 * - dbType, dbServer, dbUser, dbPassword, dbName, dbFlags
357 * equivalent to the corresponding member of $wgDBservers
358 * - tablePrefix Table prefix, the foreign wiki's $wgDBprefix
359 * - hasSharedCache True if the wiki's shared cache is accessible via the local $wgMemc
362 * - apibase Use for the foreign API's URL
363 * - apiThumbCacheExpiry How long to locally cache thumbs for
365 * If you leave $wgLocalFileRepo set to false, Setup will fill in appropriate values.
366 * Otherwise, set $wgLocalFileRepo to a repository structure as described above.
367 * If you set $wgUseInstantCommons to true, it will add an entry for Commons.
368 * If you set $wgForeignFileRepos to an array of repostory structures, those will
369 * be searched after the local file repo.
370 * Otherwise, you will only have access to local media files.
372 $wgLocalFileRepo = false;
374 /** @see $wgLocalFileRepo */
375 $wgForeignFileRepos = array();
378 * Use Commons as a remote file repository. Essentially a wrapper, when this
379 * is enabled $wgForeignFileRepos will point at Commons with a set of default
382 $wgUseInstantCommons = false;
385 * Show EXIF data, on by default if available.
386 * Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php
388 * NOTE FOR WINDOWS USERS:
389 * To enable EXIF functions, add the folloing lines to the
390 * "Windows extensions" section of php.ini:
392 * extension=extensions/php_mbstring.dll
393 * extension=extensions/php_exif.dll
395 $wgShowEXIF = function_exists( 'exif_read_data' );
398 * If to automatically update the img_metadata field
399 * if the metadata field is outdated but compatible with the current version.
402 $wgUpdateCompatibleMetadata = false;
405 * If you operate multiple wikis, you can define a shared upload path here.
406 * Uploads to this wiki will NOT be put there - they will be put into
407 * $wgUploadDirectory.
408 * If $wgUseSharedUploads is set, the wiki will look in the shared repository if
409 * no file of the given name is found in the local repository (for [[File:..]],
410 * [[Media:..]] links). Thumbnails will also be looked for and generated in this
413 * Note that these configuration settings can now be defined on a per-
414 * repository basis for an arbitrary number of file repositories, using the
415 * $wgForeignFileRepos variable.
417 $wgUseSharedUploads = false;
418 /** Full path on the web server where shared uploads can be found */
419 $wgSharedUploadPath = "http://commons.wikimedia.org/shared/images";
420 /** Fetch commons image description pages and display them on the local wiki? */
421 $wgFetchCommonsDescriptions = false;
422 /** Path on the file system where shared uploads can be found. */
423 $wgSharedUploadDirectory = "/var/www/wiki3/images";
424 /** DB name with metadata about shared directory. Set this to false if the uploads do not come from a wiki. */
425 $wgSharedUploadDBname = false;
426 /** Optional table prefix used in database. */
427 $wgSharedUploadDBprefix = '';
428 /** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */
429 $wgCacheSharedUploads = true;
431 * Allow for upload to be copied from an URL. Requires Special:Upload?source=web
432 * The timeout for copy uploads is set by $wgHTTPTimeout.
434 $wgAllowCopyUploads = false;
436 * Allow asynchronous copy uploads.
437 * This feature is experimental is broken as of r81612.
439 $wgAllowAsyncCopyUploads = false;
442 * Max size for uploads, in bytes. If not set to an array, applies to all
443 * uploads. If set to an array, per upload type maximums can be set, using the
444 * file and url keys. If the * key is set this value will be used as maximum
445 * for non-specified types.
448 * $wgMaxUploadSize = array(
450 * 'url' => 500 * 1024,
452 * Sets the maximum for all uploads to 250 kB except for upload-by-url, which
453 * will have a maximum of 500 kB.
456 $wgMaxUploadSize = 1024*1024*100; # 100MB
459 * Point the upload navigation link to an external URL
460 * Useful if you want to use a shared repository by default
461 * without disabling local uploads (use $wgEnableUploads = false for that)
462 * e.g. $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
464 $wgUploadNavigationUrl = false;
467 * Point the upload link for missing files to an external URL, as with
468 * $wgUploadNavigationUrl. The URL will get (?|&)wpDestFile=<filename>
469 * appended to it as appropriate.
471 $wgUploadMissingFileUrl = false;
474 * Give a path here to use thumb.php for thumbnail generation on client request, instead of
475 * generating them on render and outputting a static URL. This is necessary if some of your
476 * apache servers don't have read/write access to the thumbnail path.
479 * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb{$wgScriptExtension}";
481 $wgThumbnailScriptPath = false;
482 $wgSharedThumbnailScriptPath = false;
485 * Set this to false if you do not want MediaWiki to divide your images
486 * directory into many subdirectories, for improved performance.
488 * It's almost always good to leave this enabled. In previous versions of
489 * MediaWiki, some users set this to false to allow images to be added to the
490 * wiki by simply copying them into $wgUploadDirectory and then running
491 * maintenance/rebuildImages.php to register them in the database. This is no
492 * longer recommended, use maintenance/importImages.php instead.
494 * Note that this variable may be ignored if $wgLocalFileRepo is set.
496 $wgHashedUploadDirectory = true;
499 * Set the following to false especially if you have a set of files that need to
500 * be accessible by all wikis, and you do not want to use the hash (path/a/aa/)
503 $wgHashedSharedUploadDirectory = true;
506 * Base URL for a repository wiki. Leave this blank if uploads are just stored
507 * in a shared directory and not meant to be accessible through a separate wiki.
508 * Otherwise the image description pages on the local wiki will link to the
509 * image description page on this wiki.
511 * Please specify the namespace, as in the example below.
513 $wgRepositoryBaseUrl = "http://commons.wikimedia.org/wiki/File:";
516 * This is the list of preferred extensions for uploading files. Uploading files
517 * with extensions not in this list will trigger a warning.
519 * WARNING: If you add any OpenOffice or Microsoft Office file formats here,
520 * such as odt or doc, and untrusted users are allowed to upload files, then
521 * your wiki will be vulnerable to cross-site request forgery (CSRF).
523 $wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg' );
525 /** Files with these extensions will never be allowed as uploads. */
526 $wgFileBlacklist = array(
527 # HTML may contain cookie-stealing JavaScript and web bugs
528 'html', 'htm', 'js', 'jsb', 'mhtml', 'mht', 'xhtml', 'xht',
529 # PHP scripts may execute arbitrary code on the server
530 'php', 'phtml', 'php3', 'php4', 'php5', 'phps',
531 # Other types that may be interpreted by some servers
532 'shtml', 'jhtml', 'pl', 'py', 'cgi',
533 # May contain harmful executables for Windows victims
534 'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' );
537 * Files with these mime types will never be allowed as uploads
538 * if $wgVerifyMimeType is enabled.
540 $wgMimeTypeBlacklist = array(
541 # HTML may contain cookie-stealing JavaScript and web bugs
542 'text/html', 'text/javascript', 'text/x-javascript', 'application/x-shellscript',
543 # PHP scripts may execute arbitrary code on the server
544 'application/x-php', 'text/x-php',
545 # Other types that may be interpreted by some servers
546 'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh',
547 # Client-side hazards on Internet Explorer
548 'text/scriptlet', 'application/x-msdownload',
549 # Windows metafile, client-side vulnerability on some systems
550 'application/x-msmetafile',
554 * Allow Java archive uploads.
555 * This is not recommended for public wikis since a maliciously-constructed
556 * applet running on the same domain as the wiki can steal the user's cookies.
558 $wgAllowJavaUploads = false;
561 * This is a flag to determine whether or not to check file extensions on upload.
563 * WARNING: setting this to false is insecure for public wikis.
565 $wgCheckFileExtensions = true;
568 * If this is turned off, users may override the warning for files not covered
569 * by $wgFileExtensions.
571 * WARNING: setting this to false is insecure for public wikis.
573 $wgStrictFileExtensions = true;
575 /** Warn if uploaded files are larger than this (in bytes), or false to disable*/
576 $wgUploadSizeWarning = false;
579 * list of trusted media-types and mime types.
580 * Use the MEDIATYPE_xxx constants to represent media types.
581 * This list is used by File::isSafeFile
583 * Types not listed here will have a warning about unsafe content
584 * displayed on the images description page. It would also be possible
585 * to use this for further restrictions, like disabling direct
586 * [[media:...]] links for non-trusted formats.
588 $wgTrustedMediaFormats = array(
589 MEDIATYPE_BITMAP
, //all bitmap formats
590 MEDIATYPE_AUDIO
, //all audio formats
591 MEDIATYPE_VIDEO
, //all plain video formats
592 "image/svg+xml", //svg (only needed if inline rendering of svg is not supported)
593 "application/pdf", //PDF files
594 #"application/x-shockwave-flash", //flash/shockwave movie
598 * Plugins for media file type handling.
599 * Each entry in the array maps a MIME type to a class name
601 $wgMediaHandlers = array(
602 'image/jpeg' => 'JpegHandler',
603 'image/png' => 'PNGHandler',
604 'image/gif' => 'GIFHandler',
605 'image/tiff' => 'TiffHandler',
606 'image/x-ms-bmp' => 'BmpHandler',
607 'image/x-bmp' => 'BmpHandler',
608 'image/svg+xml' => 'SvgHandler', // official
609 'image/svg' => 'SvgHandler', // compat
610 'image/vnd.djvu' => 'DjVuHandler', // official
611 'image/x.djvu' => 'DjVuHandler', // compat
612 'image/x-djvu' => 'DjVuHandler', // compat
616 * Resizing can be done using PHP's internal image libraries or using
617 * ImageMagick or another third-party converter, e.g. GraphicMagick.
618 * These support more file formats than PHP, which only supports PNG,
619 * GIF, JPG, XBM and WBMP.
621 * Use Image Magick instead of PHP builtin functions.
623 $wgUseImageMagick = false;
624 /** The convert command shipped with ImageMagick */
625 $wgImageMagickConvertCommand = '/usr/bin/convert';
627 /** Sharpening parameter to ImageMagick */
628 $wgSharpenParameter = '0x0.4';
630 /** Reduction in linear dimensions below which sharpening will be enabled */
631 $wgSharpenReductionThreshold = 0.85;
634 * Temporary directory used for ImageMagick. The directory must exist. Leave
635 * this set to false to let ImageMagick decide for itself.
637 $wgImageMagickTempDir = false;
640 * Use another resizing converter, e.g. GraphicMagick
641 * %s will be replaced with the source path, %d with the destination
642 * %w and %h will be replaced with the width and height.
644 * Example for GraphicMagick:
646 * $wgCustomConvertCommand = "gm convert %s -resize %wx%h %d"
649 * Leave as false to skip this.
651 $wgCustomConvertCommand = false;
654 * Scalable Vector Graphics (SVG) may be uploaded as images.
655 * Since SVG support is not yet standard in browsers, it is
656 * necessary to rasterize SVGs to PNG as a fallback format.
658 * An external program is required to perform this conversion.
659 * If set to an array, the first item is a PHP callable and any further items
660 * are passed as parameters after $srcPath, $dstPath, $width, $height
662 $wgSVGConverters = array(
663 'ImageMagick' => '$path/convert -background white -thumbnail $widthx$height\! $input PNG:$output',
664 'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
665 'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
666 'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input',
667 'rsvg' => '$path/rsvg -w$width -h$height $input $output',
668 'imgserv' => '$path/imgserv-wrapper -i svg -o png -w$width $input $output',
669 'ImagickExt' => array( 'SvgHandler::rasterizeImagickExt' ),
671 /** Pick a converter defined in $wgSVGConverters */
672 $wgSVGConverter = 'ImageMagick';
673 /** If not in the executable PATH, specify the SVG converter path. */
674 $wgSVGConverterPath = '';
675 /** Don't scale a SVG larger than this */
676 $wgSVGMaxSize = 2048;
677 /** Don't read SVG metadata beyond this point.
678 * Default is 1024*256 bytes */
679 $wgSVGMetadataCutoff = 262144;
682 * MediaWiki will reject HTMLesque tags in uploaded files due to idiotic browsers which can't
683 * perform basic stuff like MIME detection and which are vulnerable to further idiots uploading
684 * crap files as images. When this directive is on, <title> will be allowed in files with
685 * an "image/svg+xml" MIME type. You should leave this disabled if your web server is misconfigured
686 * and doesn't send appropriate MIME types for SVG images.
688 $wgAllowTitlesInSVG = false;
691 * Don't thumbnail an image if it will use too much working memory.
692 * Default is 50 MB if decompressed to RGBA form, which corresponds to
693 * 12.5 million pixels or 3500x3500
695 $wgMaxImageArea = 1.25e7
;
697 * Force thumbnailing of animated GIFs above this size to a single
698 * frame instead of an animated thumbnail. As of MW 1.17 this limit
699 * is checked against the total size of all frames in the animation.
700 * It probably makes sense to keep this equal to $wgMaxImageArea.
702 $wgMaxAnimatedGifArea = 1.25e7
;
704 * Browsers don't support TIFF inline generally...
705 * For inline display, we need to convert to PNG or JPEG.
706 * Note scaling should work with ImageMagick, but may not with GD scaling.
710 * // PNG is lossless, but inefficient for photos
711 * $wgTiffThumbnailType = array( 'png', 'image/png' );
712 * // JPEG is good for photos, but has no transparency support. Bad for diagrams.
713 * $wgTiffThumbnailType = array( 'jpg', 'image/jpeg' );
716 $wgTiffThumbnailType = false;
719 * If rendered thumbnail files are older than this timestamp, they
720 * will be rerendered on demand as if the file didn't already exist.
721 * Update if there is some need to force thumbs and SVG rasterizations
722 * to rerender, such as fixes to rendering bugs.
724 $wgThumbnailEpoch = '20030516000000';
727 * If set, inline scaled images will still produce <img> tags ready for
728 * output instead of showing an error message.
730 * This may be useful if errors are transitory, especially if the site
731 * is configured to automatically render thumbnails on request.
733 * On the other hand, it may obscure error conditions from debugging.
734 * Enable the debug log or the 'thumbnail' log group to make sure errors
735 * are logged to a file for review.
737 $wgIgnoreImageErrors = false;
740 * Allow thumbnail rendering on page view. If this is false, a valid
741 * thumbnail URL is still output, but no file will be created at
742 * the target location. This may save some time if you have a
743 * thumb.php or 404 handler set up which is faster than the regular
746 $wgGenerateThumbnailOnParse = true;
749 * Show thumbnails for old images on the image description page
751 $wgShowArchiveThumbnails = true;
753 /** Obsolete, always true, kept for compatibility with extensions */
754 $wgUseImageResize = true;
758 * Internal name of virus scanner. This servers as a key to the
759 * $wgAntivirusSetup array. Set this to NULL to disable virus scanning. If not
760 * null, every file uploaded will be scanned for viruses.
765 * Configuration for different virus scanners. This an associative array of
766 * associative arrays. It contains one setup array per known scanner type.
767 * The entry is selected by $wgAntivirus, i.e.
768 * valid values for $wgAntivirus are the keys defined in this array.
770 * The configuration array for each scanner contains the following keys:
771 * "command", "codemap", "messagepattern":
773 * "command" is the full command to call the virus scanner - %f will be
774 * replaced with the name of the file to scan. If not present, the filename
775 * will be appended to the command. Note that this must be overwritten if the
776 * scanner is not in the system path; in that case, plase set
777 * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full
780 * "codemap" is a mapping of exit code to return codes of the detectVirus
781 * function in SpecialUpload.
782 * - An exit code mapped to AV_SCAN_FAILED causes the function to consider
783 * the scan to be failed. This will pass the file if $wgAntivirusRequired
785 * - An exit code mapped to AV_SCAN_ABORTED causes the function to consider
786 * the file to have an usupported format, which is probably imune to
787 * virusses. This causes the file to pass.
788 * - An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning
789 * no virus was found.
790 * - All other codes (like AV_VIRUS_FOUND) will cause the function to report
792 * - You may use "*" as a key in the array to catch all exit codes not mapped otherwise.
794 * "messagepattern" is a perl regular expression to extract the meaningful part of the scanners
795 * output. The relevant part should be matched as group one (\1).
796 * If not defined or the pattern does not match, the full message is shown to the user.
798 $wgAntivirusSetup = array(
802 'command' => "clamscan --no-summary ",
805 "0" => AV_NO_VIRUS
, # no virus
806 "1" => AV_VIRUS_FOUND
, # virus found
807 "52" => AV_SCAN_ABORTED
, # unsupported file format (probably imune)
808 "*" => AV_SCAN_FAILED
, # else scan failed
811 'messagepattern' => '/.*?:(.*)/sim',
816 'command' => "f-prot ",
819 "0" => AV_NO_VIRUS
, # no virus
820 "3" => AV_VIRUS_FOUND
, # virus found
821 "6" => AV_VIRUS_FOUND
, # virus found
822 "*" => AV_SCAN_FAILED
, # else scan failed
825 'messagepattern' => '/.*?Infection:(.*)$/m',
830 /** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected. */
831 $wgAntivirusRequired = true;
833 /** Determines if the mime type of uploaded files should be checked */
834 $wgVerifyMimeType = true;
836 /** Sets the mime type definition file to use by MimeMagic.php. */
837 $wgMimeTypeFile = "includes/mime.types";
838 #$wgMimeTypeFile= "/etc/mime.types";
839 #$wgMimeTypeFile= null; #use built-in defaults only.
841 /** Sets the mime type info file to use by MimeMagic.php. */
842 $wgMimeInfoFile= "includes/mime.info";
843 #$wgMimeInfoFile= null; #use built-in defaults only.
846 * Switch for loading the FileInfo extension by PECL at runtime.
847 * This should be used only if fileinfo is installed as a shared object
848 * or a dynamic library.
850 $wgLoadFileinfoExtension = false;
852 /** Sets an external mime detector program. The command must print only
853 * the mime type to standard output.
854 * The name of the file to process will be appended to the command given here.
855 * If not set or NULL, mime_content_type will be used if available.
858 * #$wgMimeDetectorCommand = "file -bi"; # use external mime detector (Linux)
861 $wgMimeDetectorCommand = null;
864 * Switch for trivial mime detection. Used by thumb.php to disable all fancy
865 * things, because only a few types of images are needed and file extensions
868 $wgTrivialMimeDetection = false;
871 * Additional XML types we can allow via mime-detection.
872 * array = ( 'rootElement' => 'associatedMimeType' )
874 $wgXMLMimeTypes = array(
875 'http://www.w3.org/2000/svg:svg' => 'image/svg+xml',
876 'svg' => 'image/svg+xml',
877 'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram',
878 'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml?
879 'html' => 'text/html', // application/xhtml+xml?
880 'http://www.opengis.net/kml/2.1:kml' => 'application/vnd.google-earth.kml+xml',
881 'http://www.opengis.net/kml/2.2:kml' => 'application/vnd.google-earth.kml+xml',
882 'kml' => 'application/vnd.google-earth.kml+xml',
886 * Limit images on image description pages to a user-selectable limit. In order
887 * to reduce disk usage, limits can only be selected from a list.
888 * The user preference is saved as an array offset in the database, by default
889 * the offset is set with $wgDefaultUserOptions['imagesize']. Make sure you
890 * change it if you alter the array (see bug 8858).
891 * This is the list of settings the user can choose from:
893 $wgImageLimits = array (
899 array(10000,10000) );
902 * Adjust thumbnails on image pages according to a user setting. In order to
903 * reduce disk usage, the values can only be selected from a list. This is the
904 * list of settings the user can choose from:
906 $wgThumbLimits = array(
916 * Default parameters for the <gallery> tag
918 $wgGalleryOptions = array (
919 'imagesPerRow' => 0, // Default number of images per-row in the gallery. 0 -> Adapt to screensize
920 'imageWidth' => 120, // Width of the cells containing images in galleries (in "px")
921 'imageHeight' => 120, // Height of the cells containing images in galleries (in "px")
922 'captionLength' => 25, // Length of caption to truncate (in characters)
923 'showBytes' => true, // Show the filesize in bytes in categories
927 * Adjust width of upright images when parameter 'upright' is used
928 * This allows a nicer look for upright images without the need to fix the width
929 * by hardcoded px in wiki sourcecode.
931 $wgThumbUpright = 0.75;
934 * Default value for chmoding of new directories.
936 $wgDirectoryMode = 0777;
940 * Path of the djvudump executable
941 * Enable this and $wgDjvuRenderer to enable djvu rendering
943 # $wgDjvuDump = 'djvudump';
947 * Path of the ddjvu DJVU renderer
948 * Enable this and $wgDjvuDump to enable djvu rendering
950 # $wgDjvuRenderer = 'ddjvu';
951 $wgDjvuRenderer = null;
954 * Path of the djvutxt DJVU text extraction utility
955 * Enable this and $wgDjvuDump to enable text layer extraction from djvu files
957 # $wgDjvuTxt = 'djvutxt';
961 * Path of the djvutoxml executable
962 * This works like djvudump except much, much slower as of version 3.5.
964 * For now I recommend you use djvudump instead. The djvuxml output is
965 * probably more stable, so we'll switch back to it as soon as they fix
966 * the efficiency problem.
967 * http://sourceforge.net/tracker/index.php?func=detail&aid=1704049&group_id=32953&atid=406583
969 # $wgDjvuToXML = 'djvutoxml';
974 * Shell command for the DJVU post processor
975 * Default: pnmtopng, since ddjvu generates ppm output
976 * Set this to false to output the ppm file directly.
978 $wgDjvuPostProcessor = 'pnmtojpeg';
980 * File extension for the DJVU post processor output
982 $wgDjvuOutputExtension = 'jpg';
984 /** @} */ # end of file uploads }
986 /************************************************************************//**
987 * @name Email settings
992 * Site admin email address.
994 $wgEmergencyContact = 'wikiadmin@' . $serverName;
997 * Password reminder email address.
999 * The address we should use as sender when a user is requesting his password.
1001 $wgPasswordSender = 'apache@' . $serverName;
1003 unset( $serverName ); # Don't leak local variables to global scope
1006 * Password reminder name
1008 $wgPasswordSenderName = 'MediaWiki Mail';
1011 * Dummy address which should be accepted during mail send action.
1012 * It might be necessary to adapt the address or to set it equal
1013 * to the $wgEmergencyContact address.
1015 $wgNoReplyAddress = 'reply@not.possible';
1018 * Set to true to enable the e-mail basic features:
1019 * Password reminders, etc. If sending e-mail on your
1020 * server doesn't work, you might want to disable this.
1022 $wgEnableEmail = true;
1025 * Set to true to enable user-to-user e-mail.
1026 * This can potentially be abused, as it's hard to track.
1028 $wgEnableUserEmail = true;
1031 * Set to true to put the sending user's email in a Reply-To header
1032 * instead of From. ($wgEmergencyContact will be used as From.)
1034 * Some mailers (eg sSMTP) set the SMTP envelope sender to the From value,
1035 * which can cause problems with SPF validation and leak recipient addressses
1036 * when bounces are sent to the sender.
1038 $wgUserEmailUseReplyTo = false;
1041 * Minimum time, in hours, which must elapse between password reminder
1042 * emails for a given account. This is to prevent abuse by mail flooding.
1044 $wgPasswordReminderResendTime = 24;
1047 * The time, in seconds, when an emailed temporary password expires.
1049 $wgNewPasswordExpiry = 3600 * 24 * 7;
1052 * The time, in seconds, when an email confirmation email expires
1054 $wgUserEmailConfirmationTokenExpiry = 7 * 24 * 60 * 60;
1058 * For using a direct (authenticated) SMTP server connection.
1059 * Default to false or fill an array :
1061 * "host" => 'SMTP domain',
1062 * "IDHost" => 'domain for MessageID',
1064 * "auth" => true/false,
1065 * "username" => user,
1066 * "password" => password
1072 * Additional email parameters, will be passed as the last argument to mail() call.
1073 * If using safe_mode this has no effect
1075 $wgAdditionalMailParams = null;
1078 * True: from page editor if s/he opted-in. False: Enotif mails appear to come
1079 * from $wgEmergencyContact
1081 $wgEnotifFromEditor = false;
1083 // TODO move UPO to preferences probably ?
1084 # If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion
1085 # If set to false, the corresponding input form on the user preference page is suppressed
1086 # It call this to be a "user-preferences-option (UPO)"
1089 * Require email authentication before sending mail to an email addres. This is
1090 * highly recommended. It prevents MediaWiki from being used as an open spam
1093 $wgEmailAuthentication = true;
1096 * Allow users to enable email notification ("enotif") on watchlist changes.
1098 $wgEnotifWatchlist = false;
1101 * Allow users to enable email notification ("enotif") when someone edits their
1104 $wgEnotifUserTalk = false;
1107 * Set the Reply-to address in notifications to the editor's address, if user
1108 * allowed this in the preferences.
1110 $wgEnotifRevealEditorAddress = false;
1113 * Send notification mails on minor edits to watchlist pages. This is enabled
1114 * by default. Does not affect user talk notifications.
1116 $wgEnotifMinorEdits = true;
1119 * Send a generic mail instead of a personalised mail for each user. This
1120 * always uses UTC as the time zone, and doesn't include the username.
1122 * For pages with many users watching, this can significantly reduce mail load.
1123 * Has no effect when using sendmail rather than SMTP.
1125 $wgEnotifImpersonal = false;
1128 * Maximum number of users to mail at once when using impersonal mail. Should
1129 * match the limit on your mail server.
1131 $wgEnotifMaxRecips = 500;
1134 * Send mails via the job queue. This can be useful to reduce the time it
1135 * takes to save a page that a lot of people are watching.
1137 $wgEnotifUseJobQ = false;
1140 * Use real name instead of username in e-mail "from" field.
1142 $wgEnotifUseRealName = false;
1145 * Array of usernames who will be sent a notification email for every change
1146 * which occurs on a wiki.
1148 $wgUsersNotifiedOnAllChanges = array();
1151 /** @} */ # end of email settings
1153 /************************************************************************//**
1154 * @name Database settings
1157 /** Database host name or IP address */
1158 $wgDBserver = 'localhost';
1159 /** Database port number (for PostgreSQL) */
1161 /** Name of the database */
1162 $wgDBname = 'my_wiki';
1163 /** Database username */
1164 $wgDBuser = 'wikiuser';
1165 /** Database user's password */
1167 /** Database type */
1168 $wgDBtype = 'mysql';
1170 /** Separate username for maintenance tasks. Leave as null to use the default. */
1171 $wgDBadminuser = null;
1172 /** Separate password for maintenance tasks. Leave as null to use the default. */
1173 $wgDBadminpassword = null;
1177 * Leave as null to select the default search engine for the
1178 * selected database type (eg SearchMySQL), or set to a class
1179 * name to override to a custom search engine.
1181 $wgSearchType = null;
1183 /** Table name prefix */
1185 /** MySQL table options to use during installation or update */
1186 $wgDBTableOptions = 'ENGINE=InnoDB';
1189 * SQL Mode - default is turning off all modes, including strict, if set.
1190 * null can be used to skip the setting for performance reasons and assume
1191 * DBA has done his best job.
1192 * String override can be used for some additional fun :-)
1196 /** Mediawiki schema */
1197 $wgDBmwschema = 'mediawiki';
1199 /** To override default SQLite data directory ($docroot/../data) */
1200 $wgSQLiteDataDir = '';
1203 * Make all database connections secretly go to localhost. Fool the load balancer
1204 * thinking there is an arbitrarily large cluster of servers to connect to.
1205 * Useful for debugging.
1207 $wgAllDBsAreLocalhost = false;
1210 * Shared database for multiple wikis. Commonly used for storing a user table
1211 * for single sign-on. The server for this database must be the same as for the
1214 * For backwards compatibility the shared prefix is set to the same as the local
1215 * prefix, and the user table is listed in the default list of shared tables.
1216 * The user_properties table is also added so that users will continue to have their
1217 * preferences shared (preferences were stored in the user table prior to 1.16)
1219 * $wgSharedTables may be customized with a list of tables to share in the shared
1220 * datbase. However it is advised to limit what tables you do share as many of
1221 * MediaWiki's tables may have side effects if you try to share them.
1224 * $wgSharedPrefix is the table prefix for the shared database. It defaults to
1229 /** @see $wgSharedDB */
1230 $wgSharedPrefix = false;
1231 /** @see $wgSharedDB */
1232 $wgSharedTables = array( 'user', 'user_properties' );
1235 * Database load balancer
1236 * This is a two-dimensional array, an array of server info structures
1239 * - dbname: Default database name
1241 * - password: DB password
1242 * - type: "mysql" or "postgres"
1243 * - load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
1244 * - groupLoads: array of load ratios, the key is the query group name. A query may belong
1245 * to several groups, the most specific group defined here is used.
1247 * - flags: bit field
1248 * - DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
1249 * - DBO_DEBUG -- equivalent of $wgDebugDumpSql
1250 * - DBO_TRX -- wrap entire request in a transaction
1251 * - DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
1252 * - DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
1254 * - max lag: (optional) Maximum replication lag before a slave will taken out of rotation
1255 * - max threads: (optional) Maximum number of running threads
1257 * These and any other user-defined properties will be assigned to the mLBInfo member
1258 * variable of the Database object.
1260 * Leave at false to use the single-server variables above. If you set this
1261 * variable, the single-server variables will generally be ignored (except
1262 * perhaps in some command-line scripts).
1264 * The first server listed in this array (with key 0) will be the master. The
1265 * rest of the servers will be slaves. To prevent writes to your slaves due to
1266 * accidental misconfiguration or MediaWiki bugs, set read_only=1 on all your
1267 * slaves in my.cnf. You can set read_only mode at runtime using:
1270 * SET @@read_only=1;
1273 * Since the effect of writing to a slave is so damaging and difficult to clean
1274 * up, we at Wikimedia set read_only=1 in my.cnf on all our DB servers, even
1275 * our masters, and then set read_only=0 on masters at runtime.
1277 $wgDBservers = false;
1280 * Load balancer factory configuration
1281 * To set up a multi-master wiki farm, set the class here to something that
1282 * can return a LoadBalancer with an appropriate master on a call to getMainLB().
1283 * The class identified here is responsible for reading $wgDBservers,
1284 * $wgDBserver, etc., so overriding it may cause those globals to be ignored.
1286 * The LBFactory_Multi class is provided for this purpose, please see
1287 * includes/db/LBFactory_Multi.php for configuration information.
1289 $wgLBFactoryConf = array( 'class' => 'LBFactory_Simple' );
1291 /** How long to wait for a slave to catch up to the master */
1292 $wgMasterWaitTimeout = 10;
1294 /** File to log database errors to */
1295 $wgDBerrorLog = false;
1297 /** When to give an error message */
1298 $wgDBClusterTimeout = 10;
1301 * Scale load balancer polling time so that under overload conditions, the database server
1302 * receives a SHOW STATUS query at an average interval of this many microseconds
1304 $wgDBAvgStatusPoll = 2000;
1306 /** Set to true if using InnoDB tables */
1307 $wgDBtransactions = false;
1308 /** Set to true for compatibility with extensions that might be checking.
1309 * MySQL 3.23.x is no longer supported. */
1313 * Set to true to engage MySQL 4.1/5.0 charset-related features;
1314 * for now will just cause sending of 'SET NAMES=utf8' on connect.
1316 * WARNING: THIS IS EXPERIMENTAL!
1318 * May break if you're not using the table defs from mysql5/tables.sql.
1319 * May break if you're upgrading an existing wiki if set differently.
1320 * Broken symptoms likely to include incorrect behavior with page titles,
1321 * usernames, comments etc containing non-ASCII characters.
1322 * Might also cause failures on the object cache and other things.
1324 * Even correct usage may cause failures with Unicode supplementary
1325 * characters (those not in the Basic Multilingual Plane) unless MySQL
1326 * has enhanced their Unicode support.
1328 $wgDBmysql5 = false;
1331 * Other wikis on this site, can be administered from a single developer
1333 * Array numeric key => database name
1335 $wgLocalDatabases = array();
1338 * If lag is higher than $wgSlaveLagWarning, show a warning in some special
1339 * pages (like watchlist). If the lag is higher than $wgSlaveLagCritical,
1340 * show a more obvious warning.
1342 $wgSlaveLagWarning = 10;
1343 /** @see $wgSlaveLagWarning */
1344 $wgSlaveLagCritical = 30;
1347 * Use old names for change_tags indices.
1349 $wgOldChangeTagsIndex = false;
1351 /**@}*/ # End of DB settings }
1354 /************************************************************************//**
1355 * @name Text storage
1360 * We can also compress text stored in the 'text' table. If this is set on, new
1361 * revisions will be compressed on page save if zlib support is available. Any
1362 * compressed revisions will be decompressed on load regardless of this setting
1363 * *but will not be readable at all* if zlib support is not available.
1365 $wgCompressRevisions = false;
1368 * External stores allow including content
1369 * from non database sources following URL links
1371 * Short names of ExternalStore classes may be specified in an array here:
1372 * $wgExternalStores = array("http","file","custom")...
1374 * CAUTION: Access to database might lead to code execution
1376 $wgExternalStores = false;
1379 * An array of external mysql servers, e.g.
1380 * $wgExternalServers = array( 'cluster1' => array( 'srv28', 'srv29', 'srv30' ) );
1381 * Used by LBFactory_Simple, may be ignored if $wgLBFactoryConf is set to another class.
1383 $wgExternalServers = array();
1386 * The place to put new revisions, false to put them in the local text table.
1387 * Part of a URL, e.g. DB://cluster1
1389 * Can be an array instead of a single string, to enable data distribution. Keys
1390 * must be consecutive integers, starting at zero. Example:
1392 * $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' );
1395 $wgDefaultExternalStore = false;
1398 * Revision text may be cached in $wgMemc to reduce load on external storage
1399 * servers and object extraction overhead for frequently-loaded revisions.
1401 * Set to 0 to disable, or number of seconds before cache expiry.
1403 $wgRevisionCacheExpiry = 0;
1405 /** @} */ # end text storage }
1407 /************************************************************************//**
1408 * @name Performance hacks and limits
1411 /** Disable database-intensive features */
1412 $wgMiserMode = false;
1413 /** Disable all query pages if miser mode is on, not just some */
1414 $wgDisableQueryPages = false;
1415 /** Number of rows to cache in 'querycache' table when miser mode is on */
1416 $wgQueryCacheLimit = 1000;
1417 /** Number of links to a page required before it is deemed "wanted" */
1418 $wgWantedPagesThreshold = 1;
1419 /** Enable slow parser functions */
1420 $wgAllowSlowParserFunctions = false;
1423 * Do DELETE/INSERT for link updates instead of incremental
1425 $wgUseDumbLinkUpdate = false;
1428 * Anti-lock flags - bitfield
1429 * - ALF_PRELOAD_LINKS:
1430 * Preload links during link update for save
1431 * - ALF_PRELOAD_EXISTENCE:
1432 * Preload cur_id during replaceLinkHolders
1433 * - ALF_NO_LINK_LOCK:
1434 * Don't use locking reads when updating the link table. This is
1435 * necessary for wikis with a high edit rate for performance
1436 * reasons, but may cause link table inconsistency
1437 * - ALF_NO_BLOCK_LOCK:
1438 * As for ALF_LINK_LOCK, this flag is a necessity for high-traffic
1441 $wgAntiLockFlags = 0;
1444 * Maximum article size in kilobytes
1446 $wgMaxArticleSize = 2048;
1449 * The minimum amount of memory that MediaWiki "needs"; MediaWiki will try to
1450 * raise PHP's memory limit if it's below this amount.
1452 $wgMemoryLimit = "50M";
1454 /** @} */ # end performance hacks }
1456 /************************************************************************//**
1457 * @name Cache settings
1462 * Directory for caching data in the local filesystem. Should not be accessible
1463 * from the web. Set this to false to not use any local caches.
1465 * Note: if multiple wikis share the same localisation cache directory, they
1466 * must all have the same set of extensions. You can set a directory just for
1467 * the localisation cache using $wgLocalisationCacheConf['storeDirectory'].
1469 $wgCacheDirectory = false;
1472 * Main cache type. This should be a cache with fast access, but it may have
1473 * limited space. By default, it is disabled, since the database is not fast
1474 * enough to make it worthwhile.
1478 * - CACHE_ANYTHING: Use anything, as long as it works
1479 * - CACHE_NONE: Do not cache
1480 * - CACHE_DB: Store cache objects in the DB
1481 * - CACHE_MEMCACHED: MemCached, must specify servers in $wgMemCachedServers
1482 * - CACHE_ACCEL: eAccelerator, APC, XCache or WinCache
1483 * - CACHE_DBA: Use PHP's DBA extension to store in a DBM-style
1484 * database. This is slow, and is not recommended for
1485 * anything other than debugging.
1486 * - (other): A string may be used which identifies a cache
1487 * configuration in $wgObjectCaches.
1489 * @see $wgMessageCacheType, $wgParserCacheType
1491 $wgMainCacheType = CACHE_NONE
;
1494 * The cache type for storing the contents of the MediaWiki namespace. This
1495 * cache is used for a small amount of data which is expensive to regenerate.
1497 * For available types see $wgMainCacheType.
1499 $wgMessageCacheType = CACHE_ANYTHING
;
1502 * The cache type for storing article HTML. This is used to store data which
1503 * is expensive to regenerate, and benefits from having plenty of storage space.
1505 * For available types see $wgMainCacheType.
1507 $wgParserCacheType = CACHE_ANYTHING
;
1510 * Advanced object cache configuration.
1512 * Use this to define the class names and constructor parameters which are used
1513 * for the various cache types. Custom cache types may be defined here and
1514 * referenced from $wgMainCacheType, $wgMessageCacheType or $wgParserCacheType.
1516 * The format is an associative array where the key is a cache identifier, and
1517 * the value is an associative array of parameters. The "class" parameter is the
1518 * class name which will be used. Alternatively, a "factory" parameter may be
1519 * given, giving a callable function which will generate a suitable cache object.
1521 * The other parameters are dependent on the class used.
1523 $wgObjectCaches = array(
1524 CACHE_NONE
=> array( 'class' => 'EmptyBagOStuff' ),
1525 CACHE_DB
=> array( 'class' => 'SqlBagOStuff', 'table' => 'objectcache' ),
1526 CACHE_DBA
=> array( 'class' => 'DBABagOStuff' ),
1528 CACHE_ANYTHING
=> array( 'factory' => 'ObjectCache::newAnything' ),
1529 CACHE_ACCEL
=> array( 'factory' => 'ObjectCache::newAccelerator' ),
1530 CACHE_MEMCACHED
=> array( 'factory' => 'ObjectCache::newMemcached' ),
1532 'eaccelerator' => array( 'class' => 'eAccelBagOStuff' ),
1533 'apc' => array( 'class' => 'APCBagOStuff' ),
1534 'xcache' => array( 'class' => 'XCacheBagOStuff' ),
1535 'wincache' => array( 'class' => 'WinCacheBagOStuff' ),
1536 'memcached-php' => array( 'class' => 'MemcachedPhpBagOStuff' ),
1540 * The expiry time for the parser cache, in seconds. The default is 86.4k
1541 * seconds, otherwise known as a day.
1543 $wgParserCacheExpireTime = 86400;
1546 * Select which DBA handler <http://www.php.net/manual/en/dba.requirements.php> to use as CACHE_DBA backend
1548 $wgDBAhandler = 'db3';
1551 * Store sessions in MemCached. This can be useful to improve performance, or to
1552 * avoid the locking behaviour of PHP's default session handler, which tends to
1553 * prevent multiple requests for the same user from acting concurrently.
1555 $wgSessionsInMemcached = false;
1558 * This is used for setting php's session.save_handler. In practice, you will
1559 * almost never need to change this ever. Other options might be 'user' or
1560 * 'session_mysql.' Setting to null skips setting this entirely (which might be
1561 * useful if you're doing cross-application sessions, see bug 11381)
1563 $wgSessionHandler = 'files';
1565 /** If enabled, will send MemCached debugging information to $wgDebugLogFile */
1566 $wgMemCachedDebug = false;
1568 /** The list of MemCached servers and port numbers */
1569 $wgMemCachedServers = array( '127.0.0.1:11000' );
1572 * Use persistent connections to MemCached, which are shared across multiple
1575 $wgMemCachedPersistent = false;
1578 * Read/write timeout for MemCached server communication, in microseconds.
1580 $wgMemCachedTimeout = 100000;
1583 * Set this to true to make a local copy of the message cache, for use in
1584 * addition to memcached. The files will be put in $wgCacheDirectory.
1586 $wgUseLocalMessageCache = false;
1589 * Defines format of local cache
1590 * true - Serialized object
1591 * false - PHP source file (Warning - security risk)
1593 $wgLocalMessageCacheSerialized = true;
1596 * Instead of caching everything, keep track which messages are requested and
1597 * load only most used messages. This only makes sense if there is lots of
1598 * interface messages customised in the wiki (like hundreds in many languages).
1600 $wgAdaptiveMessageCache = false;
1603 * Localisation cache configuration. Associative array with keys:
1604 * class: The class to use. May be overridden by extensions.
1606 * store: The location to store cache data. May be 'files', 'db' or
1607 * 'detect'. If set to "files", data will be in CDB files. If set
1608 * to "db", data will be stored to the database. If set to
1609 * "detect", files will be used if $wgCacheDirectory is set,
1610 * otherwise the database will be used.
1612 * storeClass: The class name for the underlying storage. If set to a class
1613 * name, it overrides the "store" setting.
1615 * storeDirectory: If the store class puts its data in files, this is the
1616 * directory it will use. If this is false, $wgCacheDirectory
1619 * manualRecache: Set this to true to disable cache updates on web requests.
1620 * Use maintenance/rebuildLocalisationCache.php instead.
1622 $wgLocalisationCacheConf = array(
1623 'class' => 'LocalisationCache',
1624 'store' => 'detect',
1625 'storeClass' => false,
1626 'storeDirectory' => false,
1627 'manualRecache' => false,
1630 /** Allow client-side caching of pages */
1631 $wgCachePages = true;
1634 * Set this to current time to invalidate all prior cached pages. Affects both
1635 * client- and server-side caching.
1636 * You can get the current date on your server by using the command:
1637 * date +%Y%m%d%H%M%S
1639 $wgCacheEpoch = '20030516000000';
1642 * Bump this number when changing the global style sheets and JavaScript.
1643 * It should be appended in the query string of static CSS and JS includes,
1644 * to ensure that client-side caches do not keep obsolete copies of global
1647 $wgStyleVersion = '303';
1650 * This will cache static pages for non-logged-in users to reduce
1651 * database traffic on public sites.
1652 * Must set $wgShowIPinHeader = false
1654 $wgUseFileCache = false;
1657 * Directory where the cached page will be saved.
1658 * Defaults to "$wgCacheDirectory/html".
1660 $wgFileCacheDirectory = false;
1663 * Depth of the subdirectory hierarchy to be created under
1664 * $wgFileCacheDirectory. The subdirectories will be named based on
1665 * the MD5 hash of the title. A value of 0 means all cache files will
1666 * be put directly into the main file cache directory.
1668 $wgFileCacheDepth = 2;
1671 * Keep parsed pages in a cache (objectcache table or memcached)
1672 * to speed up output of the same page viewed by another user with the
1675 * This can provide a significant speedup for medium to large pages,
1676 * so you probably want to keep it on. Extensions that conflict with the
1677 * parser cache should disable the cache on a per-page basis instead.
1679 $wgEnableParserCache = true;
1682 * Append a configured value to the parser cache and the sitenotice key so
1683 * that they can be kept separate for some class of activity.
1685 $wgRenderHashAppend = '';
1688 * If on, the sidebar navigation links are cached for users with the
1689 * current language set. This can save a touch of load on a busy site
1690 * by shaving off extra message lookups.
1692 * However it is also fragile: changing the site configuration, or
1693 * having a variable $wgArticlePath, can produce broken links that
1694 * don't update as expected.
1696 $wgEnableSidebarCache = false;
1699 * Expiry time for the sidebar cache, in seconds
1701 $wgSidebarCacheExpiry = 86400;
1704 * When using the file cache, we can store the cached HTML gzipped to save disk
1705 * space. Pages will then also be served compressed to clients that support it.
1706 * THIS IS NOT COMPATIBLE with ob_gzhandler which is now enabled if supported in
1707 * the default LocalSettings.php! If you enable this, remove that setting first.
1709 * Requires zlib support enabled in PHP.
1714 * Whether MediaWiki should send an ETag header. Seems to cause
1715 * broken behavior with Squid 2.6, see bug 7098.
1719 /** Clock skew or the one-second resolution of time() can occasionally cause cache
1720 * problems when the user requests two pages within a short period of time. This
1721 * variable adds a given number of seconds to vulnerable timestamps, thereby giving
1724 $wgClockSkewFudge = 5;
1727 * Invalidate various caches when LocalSettings.php changes. This is equivalent
1728 * to setting $wgCacheEpoch to the modification time of LocalSettings.php, as
1729 * was previously done in the default LocalSettings.php file.
1731 * On high-traffic wikis, this should be set to false, to avoid the need to
1732 * check the file modification time, and to avoid the performance impact of
1733 * unnecessary cache invalidations.
1735 $wgInvalidateCacheOnLocalSettingsChange = true;
1737 /** @} */ # end of cache settings
1739 /************************************************************************//**
1740 * @name HTTP proxy (Squid) settings
1742 * Many of these settings apply to any HTTP proxy used in front of MediaWiki,
1743 * although they are referred to as Squid settings for historical reasons.
1745 * Achieving a high hit ratio with an HTTP proxy requires special
1746 * configuration. See http://www.mediawiki.org/wiki/Manual:Squid_caching for
1753 * Enable/disable Squid.
1754 * See http://www.mediawiki.org/wiki/Manual:Squid_caching
1756 $wgUseSquid = false;
1758 /** If you run Squid3 with ESI support, enable this (default:false): */
1761 /** Send X-Vary-Options header for better caching (requires patched Squid) */
1765 * Internal server name as known to Squid, if different. Example:
1767 * $wgInternalServer = 'http://yourinternal.tld:8000';
1770 $wgInternalServer = false;
1773 * Cache timeout for the squid, will be sent as s-maxage (without ESI) or
1774 * Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in
1775 * the Squid config. 18000 seconds = 5 hours, more cache hits with 2678400 = 31
1778 $wgSquidMaxage = 18000;
1781 * Default maximum age for raw CSS/JS accesses
1783 $wgForcedRawSMaxage = 300;
1786 * List of proxy servers to purge on changes; default port is 80. Use IP addresses.
1788 * When MediaWiki is running behind a proxy, it will trust X-Forwarded-For
1789 * headers sent/modified from these proxies when obtaining the remote IP address
1791 * For a list of trusted servers which *aren't* purged, see $wgSquidServersNoPurge.
1793 $wgSquidServers = array();
1796 * As above, except these servers aren't purged on page changes; use to set a
1797 * list of trusted proxies, etc.
1799 $wgSquidServersNoPurge = array();
1801 /** Maximum number of titles to purge in any one client operation */
1802 $wgMaxSquidPurgeTitles = 400;
1805 * HTCP multicast address. Set this to a multicast IP address to enable HTCP.
1807 * Note that MediaWiki uses the old non-RFC compliant HTCP format, which was
1808 * present in the earliest Squid implementations of the protocol.
1810 $wgHTCPMulticastAddress = false;
1813 * HTCP multicast port.
1814 * @see $wgHTCPMulticastAddress
1819 * HTCP multicast TTL.
1820 * @see $wgHTCPMulticastAddress
1822 $wgHTCPMulticastTTL = 1;
1824 /** Should forwarded Private IPs be accepted? */
1825 $wgUsePrivateIPs = false;
1827 /** @} */ # end of HTTP proxy settings
1829 /************************************************************************//**
1830 * @name Language, regional and character encoding settings
1834 /** Site language code, should be one of ./languages/Language(.*).php */
1835 $wgLanguageCode = 'en';
1838 * Some languages need different word forms, usually for different cases.
1839 * Used in Language::convertGrammar(). Example:
1842 * $wgGrammarForms['en']['genitive']['car'] = 'car\'s';
1845 $wgGrammarForms = array();
1847 /** Treat language links as magic connectors, not inline links */
1848 $wgInterwikiMagic = true;
1850 /** Hide interlanguage links from the sidebar */
1851 $wgHideInterlanguageLinks = false;
1853 /** List of language names or overrides for default names in Names.php */
1854 $wgExtraLanguageNames = array();
1857 * List of language codes that don't correspond to an actual language.
1858 * These codes are leftoffs from renames, or other legacy things.
1859 * Also, qqq is a dummy "language" for documenting messages.
1861 $wgDummyLanguageCodes = array(
1873 /** @deprecated Since MediaWiki 1.5, this must always be set to UTF-8. */
1874 $wgInputEncoding = 'UTF-8';
1875 /** @deprecated Since MediaWiki 1.5, this must always be set to UTF-8. */
1876 $wgOutputEncoding = 'UTF-8';
1879 * Character set for use in the article edit box. Language-specific encodings
1882 * This historic feature is one of the first that was added by former MediaWiki
1883 * team leader Brion Vibber, and is used to support the Esperanto x-system.
1885 $wgEditEncoding = '';
1888 * Set this to true to replace Arabic presentation forms with their standard
1889 * forms in the U+0600-U+06FF block. This only works if $wgLanguageCode is
1892 * Note that pages with titles containing presentation forms will become
1893 * inaccessible, run maintenance/cleanupTitles.php to fix this.
1895 $wgFixArabicUnicode = true;
1898 * Set this to true to replace ZWJ-based chillu sequences in Malayalam text
1899 * with their Unicode 5.1 equivalents. This only works if $wgLanguageCode is
1900 * set to "ml". Note that some clients (even new clients as of 2010) do not
1901 * support these characters.
1903 * If you enable this on an existing wiki, run maintenance/cleanupTitles.php to
1904 * fix any ZWJ sequences in existing page titles.
1906 $wgFixMalayalamUnicode = true;
1909 * Set this to always convert certain Unicode sequences to modern ones
1910 * regardless of the content language. This has a small performance
1913 * See $wgFixArabicUnicode and $wgFixMalayalamUnicode for conversion
1918 $wgAllUnicodeFixes = false;
1921 * Set this to eg 'ISO-8859-1' to perform character set conversion when
1922 * loading old revisions not marked with "utf-8" flag. Use this when
1923 * converting a wiki from MediaWiki 1.4 or earlier to UTF-8 without the
1924 * burdensome mass conversion of old text data.
1926 * NOTE! This DOES NOT touch any fields other than old_text.Titles, comments,
1927 * user names, etc still must be converted en masse in the database before
1928 * continuing as a UTF-8 wiki.
1930 $wgLegacyEncoding = false;
1933 * Browser Blacklist for unicode non compliant browsers. Contains a list of
1934 * regexps : "/regexp/" matching problematic browsers. These browsers will
1935 * be served encoded unicode in the edit box instead of real unicode.
1937 $wgBrowserBlackList = array(
1939 * Netscape 2-4 detection
1940 * The minor version may contain strings such as "Gold" or "SGoldC-SGI"
1941 * Lots of non-netscape user agents have "compatible", so it's useful to check for that
1942 * with a negative assertion. The [UIN] identifier specifies the level of security
1943 * in a Netscape/Mozilla browser, checking for it rules out a number of fakers.
1944 * The language string is unreliable, it is missing on NS4 Mac.
1946 * Reference: http://www.psychedelix.com/agents/index.shtml
1948 '/^Mozilla\/2\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
1949 '/^Mozilla\/3\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
1950 '/^Mozilla\/4\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
1953 * MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH>
1956 * - Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC)
1957 * - Mozilla/4.0 (compatible; MSIE 5.15; Mac_PowerPC)
1958 * - Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC)
1961 * @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864
1962 * @link http://en.wikipedia.org/wiki/Template%3AOS9
1964 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
1967 * Google wireless transcoder, seems to eat a lot of chars alive
1968 * http://it.wikipedia.org/w/index.php?title=Luciano_Ligabue&diff=prev&oldid=8857361
1970 '/^Mozilla\/4\.0 \(compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder;\)/'
1974 * If set to true, the MediaWiki 1.4 to 1.5 schema conversion will
1975 * create stub reference rows in the text table instead of copying
1976 * the full text of all current entries from 'cur' to 'text'.
1978 * This will speed up the conversion step for large sites, but
1979 * requires that the cur table be kept around for those revisions
1980 * to remain viewable.
1982 * maintenance/migrateCurStubs.php can be used to complete the
1983 * migration in the background once the wiki is back online.
1985 * This option affects the updaters *only*. Any present cur stub
1986 * revisions will be readable at runtime regardless of this setting.
1988 $wgLegacySchemaConversion = false;
1991 * Enable to allow rewriting dates in page text.
1992 * DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES.
1994 $wgUseDynamicDates = false;
1996 * Enable dates like 'May 12' instead of '12 May', this only takes effect if
1997 * the interface is set to English.
1999 $wgAmericanDates = false;
2001 * For Hindi and Arabic use local numerals instead of Western style (0-9)
2002 * numerals in interface.
2004 $wgTranslateNumerals = true;
2007 * Translation using MediaWiki: namespace.
2008 * Interface messages will be loaded from the database.
2010 $wgUseDatabaseMessages = true;
2013 * Expiry time for the message cache key
2015 $wgMsgCacheExpiry = 86400;
2018 * Maximum entry size in the message cache, in bytes
2020 $wgMaxMsgCacheEntrySize = 10000;
2022 /** Whether to enable language variant conversion. */
2023 $wgDisableLangConversion = false;
2025 /** Whether to enable language variant conversion for links. */
2026 $wgDisableTitleConversion = false;
2028 /** Whether to enable cononical language links in meta data. */
2029 $wgCanonicalLanguageLinks = true;
2031 /** Default variant code, if false, the default will be the language code */
2032 $wgDefaultLanguageVariant = false;
2035 * Disabled variants array of language variant conversion. Example:
2037 * $wgDisabledVariants[] = 'zh-mo';
2038 * $wgDisabledVariants[] = 'zh-my';
2044 * $wgDisabledVariants = array('zh-mo', 'zh-my');
2047 $wgDisabledVariants = array();
2050 * Like $wgArticlePath, but on multi-variant wikis, this provides a
2051 * path format that describes which parts of the URL contain the
2052 * language variant. For Example:
2054 * $wgLanguageCode = 'sr';
2055 * $wgVariantArticlePath = '/$2/$1';
2056 * $wgArticlePath = '/wiki/$1';
2058 * A link to /wiki/ would be redirected to /sr/Главна_страна
2060 * It is important that $wgArticlePath not overlap with possible values
2061 * of $wgVariantArticlePath.
2063 $wgVariantArticlePath = false;
2066 * Show a bar of language selection links in the user login and user
2067 * registration forms; edit the "loginlanguagelinks" message to
2070 $wgLoginLanguageSelector = false;
2073 * When translating messages with wfMsg(), it is not always clear what should
2074 * be considered UI messages and what should be content messages.
2076 * For example, for the English Wikipedia, there should be only one 'mainpage',
2077 * so when getting the link for 'mainpage', we should treat it as site content
2078 * and call wfMsgForContent(), but for rendering the text of the link, we call
2079 * wfMsg(). The code behaves this way by default. However, sites like the
2080 * Wikimedia Commons do offer different versions of 'mainpage' and the like for
2081 * different languages. This array provides a way to override the default
2082 * behavior. For example, to allow language-specific main page and community
2085 * $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' );
2087 $wgForceUIMsgAsContentMsg = array();
2090 * Fake out the timezone that the server thinks it's in. This will be used for
2091 * date display and not for what's stored in the DB. Leave to null to retain
2092 * your server's OS-based timezone value.
2094 * This variable is currently used only for signature formatting and for local
2095 * time/date parser variables ({{LOCALTIME}} etc.)
2097 * Timezones can be translated by editing MediaWiki messages of type
2098 * timezone-nameinlowercase like timezone-utc.
2102 * $wgLocaltimezone = 'GMT';
2103 * $wgLocaltimezone = 'PST8PDT';
2104 * $wgLocaltimezone = 'Europe/Sweden';
2105 * $wgLocaltimezone = 'CET';
2108 $wgLocaltimezone = null;
2111 * Set an offset from UTC in minutes to use for the default timezone setting
2112 * for anonymous users and new user accounts.
2114 * This setting is used for most date/time displays in the software, and is
2115 * overrideable in user preferences. It is *not* used for signature timestamps.
2117 * You can set it to match the configured server timezone like this:
2118 * $wgLocalTZoffset = date("Z") / 60;
2120 * If your server is not configured for the timezone you want, you can set
2121 * this in conjunction with the signature timezone and override the PHP default
2123 * $wgLocaltimezone="Europe/Berlin";
2124 * date_default_timezone_set( $wgLocaltimezone );
2125 * $wgLocalTZoffset = date("Z") / 60;
2127 * Leave at NULL to show times in universal time (UTC/GMT).
2129 $wgLocalTZoffset = null;
2131 /** @} */ # End of language/charset settings
2133 /*************************************************************************//**
2134 * @name Output format and skin settings
2138 /** The default Content-Type header. */
2139 $wgMimeType = 'text/html';
2142 * The content type used in script tags. This is mostly going to be ignored if
2143 * $wgHtml5 is true, at least for actual HTML output, since HTML5 doesn't
2144 * require a MIME type for JavaScript or CSS (those are the default script and
2147 $wgJsMimeType = 'text/javascript';
2150 * The HTML document type. Ignored if $wgHtml5 is true, since <!DOCTYPE html>
2151 * doesn't actually have a doctype part to put this variable's contents in.
2153 $wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN';
2156 * The URL of the document type declaration. Ignored if $wgHtml5 is true,
2157 * since HTML5 has no DTD, and <!DOCTYPE html> doesn't actually have a DTD part
2158 * to put this variable's contents in.
2160 $wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
2163 * The default xmlns attribute. Ignored if $wgHtml5 is true (or it's supposed
2164 * to be), since we don't currently support XHTML5, and in HTML5 (i.e., served
2165 * as text/html) the attribute has no effect, so why bother?
2167 $wgXhtmlDefaultNamespace = 'http://www.w3.org/1999/xhtml';
2170 * Should we output an HTML5 doctype? If false, use XHTML 1.0 Transitional
2171 * instead, and disable HTML5 features. This may eventually be removed and set
2172 * to always true. If it's true, a number of other settings will be irrelevant
2173 * and have no effect.
2178 * Defines the value of the version attribute in the <html> tag, if any.
2179 * This is ignored if $wgHtml5 is false. If $wgAllowRdfaAttributes and
2180 * $wgHtml5 are both true, and this evaluates to boolean false (like if it's
2181 * left at the default null value), it will be auto-initialized to the correct
2182 * value for RDFa+HTML5. As such, you should have no reason to ever actually
2183 * set this to anything.
2185 $wgHtml5Version = null;
2188 * Enabled RDFa attributes for use in wikitext.
2189 * NOTE: Interaction with HTML5 is somewhat underspecified.
2191 $wgAllowRdfaAttributes = false;
2194 * Enabled HTML5 microdata attributes for use in wikitext, if $wgHtml5 is also true.
2196 $wgAllowMicrodataAttributes = false;
2199 * Should we try to make our HTML output well-formed XML? If set to false,
2200 * output will be a few bytes shorter, and the HTML will arguably be more
2201 * readable. If set to true, life will be much easier for the authors of
2202 * screen-scraping bots, and the HTML will arguably be more readable.
2204 * Setting this to false may omit quotation marks on some attributes, omit
2205 * slashes from some self-closing tags, omit some ending tags, etc., where
2206 * permitted by HTML5. Setting it to true will not guarantee that all pages
2207 * will be well-formed, although non-well-formed pages should be rare and it's
2208 * a bug if you find one. Conversely, setting it to false doesn't mean that
2209 * all XML-y constructs will be omitted, just that they might be.
2211 * Because of compatibility with screen-scraping bots, and because it's
2212 * controversial, this is currently left to true by default.
2214 $wgWellFormedXml = true;
2217 * Permit other namespaces in addition to the w3.org default.
2218 * Use the prefix for the key and the namespace for the value. For
2220 * $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg';
2221 * Normally we wouldn't have to define this in the root <html>
2222 * element, but IE needs it there in some circumstances.
2224 * This is ignored if $wgHtml5 is true, for the same reason as
2225 * $wgXhtmlDefaultNamespace.
2227 $wgXhtmlNamespaces = array();
2230 * Show IP address, for non-logged in users. It's necessary to switch this off
2231 * for some forms of caching.
2233 $wgShowIPinHeader = true;
2236 * Site notice shown at the top of each page
2238 * MediaWiki:Sitenotice page, which will override this. You can also
2239 * provide a separate message for logged-out users using the
2240 * MediaWiki:Anonnotice page.
2245 * A subtitle to add to the tagline, for skins that have it/
2247 $wgExtraSubtitle = '';
2250 * If this is set, a "donate" link will appear in the sidebar. Set it to a URL.
2252 $wgSiteSupportPage = '';
2255 * Validate the overall output using tidy and refuse
2256 * to display the page if it's not valid.
2258 $wgValidateAllHtml = false;
2261 * Default skin, for new users and anonymous visitors. Registered users may
2262 * change this to any one of the other available skins in their preferences.
2263 * This has to be completely lowercase; see the "skins" directory for the list
2264 * of available skins.
2266 $wgDefaultSkin = 'vector';
2269 * Should we allow the user's to select their own skin that will override the default?
2270 * @deprecated in 1.16, use $wgHiddenPrefs[] = 'skin' to disable it
2272 $wgAllowUserSkin = true;
2275 * Specify the name of a skin that should not be presented in the list of
2276 * available skins. Use for blacklisting a skin which you do not want to
2277 * remove from the .../skins/ directory
2280 /** Array for more like $wgSkipSkin. */
2281 $wgSkipSkins = array();
2284 * Optionally, we can specify a stylesheet to use for media="handheld".
2285 * This is recognized by some, but not all, handheld/mobile/PDA browsers.
2286 * If left empty, compliant handheld browsers won't pick up the skin
2287 * stylesheet, which is specified for 'screen' media.
2289 * Can be a complete URL, base-relative path, or $wgStylePath-relative path.
2290 * Try 'chick/main.css' to apply the Chick styles to the MonoBook HTML.
2292 * Will also be switched in when 'handheld=yes' is added to the URL, like
2293 * the 'printable=yes' mode for print media.
2295 $wgHandheldStyle = false;
2298 * If set, 'screen' and 'handheld' media specifiers for stylesheets are
2299 * transformed such that they apply to the iPhone/iPod Touch Mobile Safari,
2300 * which doesn't recognize 'handheld' but does support media queries on its
2303 * Consider only using this if you have a *really good* handheld stylesheet,
2304 * as iPhone users won't have any way to disable it and use the "grown-up"
2307 $wgHandheldForIPhone = false;
2310 * Allow user Javascript page?
2311 * This enables a lot of neat customizations, but may
2312 * increase security risk to users and server load.
2314 $wgAllowUserJs = false;
2317 * Allow user Cascading Style Sheets (CSS)?
2318 * This enables a lot of neat customizations, but may
2319 * increase security risk to users and server load.
2321 $wgAllowUserCss = false;
2324 * Allow user-preferences implemented in CSS?
2325 * This allows users to customise the site appearance to a greater
2326 * degree; disabling it will improve page load times.
2328 $wgAllowUserCssPrefs = true;
2330 /** Use the site's Javascript page? */
2331 $wgUseSiteJs = true;
2333 /** Use the site's Cascading Style Sheets (CSS)? */
2334 $wgUseSiteCss = true;
2337 * Set to false to disable application of access keys and tooltips,
2338 * eg to avoid keyboard conflicts with system keys or as a low-level
2341 $wgEnableTooltipsAndAccesskeys = true;
2344 * Break out of framesets. This can be used to prevent clickjacking attacks,
2345 * or to prevent external sites from framing your site with ads.
2347 $wgBreakFrames = false;
2350 * The X-Frame-Options header to send on pages sensitive to clickjacking
2351 * attacks, such as edit pages. This prevents those pages from being displayed
2352 * in a frame or iframe. The options are:
2354 * - 'DENY': Do not allow framing. This is recommended for most wikis.
2356 * - 'SAMEORIGIN': Allow framing by pages on the same domain. This can be used
2357 * to allow framing within a trusted domain. This is insecure if there
2358 * is a page on the same domain which allows framing of arbitrary URLs.
2360 * - false: Allow all framing. This opens up the wiki to XSS attacks and thus
2361 * full compromise of local user accounts. Private wikis behind a
2362 * corporate firewall are especially vulnerable. This is not
2365 * For extra safety, set $wgBreakFrames = true, to prevent framing on all pages,
2366 * not just edit pages.
2368 $wgEditPageFrameOptions = 'DENY';
2371 * Disable output compression (enabled by default if zlib is available)
2373 $wgDisableOutputCompression = false;
2376 * Should we allow a broader set of characters in id attributes, per HTML5? If
2377 * not, use only HTML 4-compatible IDs. This option is for testing -- when the
2378 * functionality is ready, it will be on by default with no option.
2380 * Currently this appears to work fine in all browsers, but it's disabled by
2381 * default because it normalizes id's a bit too aggressively, breaking preexisting
2382 * content (particularly Cite). See bug 27733, bug 27694, bug 27474.
2384 $wgExperimentalHtmlIds = false;
2387 * Abstract list of footer icons for skins in place of old copyrightico and poweredbyico code
2388 * You can add new icons to the built in copyright or poweredby, or you can create
2389 * a new block. Though note that you may need to add some custom css to get good styling
2390 * of new blocks in monobook. vector and modern should work without any special css.
2392 * $wgFooterIcons itself is a key/value array.
2393 * The key is the name of a block that the icons will be wrapped in. The final id varies
2394 * by skin; Monobook and Vector will turn poweredby into f-poweredbyico while Modern
2395 * turns it into mw_poweredby.
2396 * The value is either key/value array of icons or a string.
2397 * In the key/value array the key may or may not be used by the skin but it can
2398 * be used to find the icon and unset it or change the icon if needed.
2399 * This is useful for disabling icons that are set by extensions.
2400 * The value should be either a string or an array. If it is a string it will be output
2401 * directly as html, however some skins may choose to ignore it. An array is the preferred format
2402 * for the icon, the following keys are used:
2403 * src: An absolute url to the image to use for the icon, this is recommended
2404 * but not required, however some skins will ignore icons without an image
2405 * url: The url to use in the <a> arround the text or icon, if not set an <a> will not be outputted
2406 * alt: This is the text form of the icon, it will be displayed without an image in
2407 * skins like Modern or if src is not set, and will otherwise be used as
2408 * the alt="" for the image. This key is required.
2409 * width and height: If the icon specified by src is not of the standard size
2410 * you can specify the size of image to use with these keys.
2411 * Otherwise they will default to the standard 88x31.
2413 $wgFooterIcons = array(
2414 "copyright" => array(
2415 "copyright" => array(), // placeholder for the built in copyright icon
2417 "poweredby" => array(
2418 "mediawiki" => array(
2419 "src" => null, // Defaults to "$wgStylePath/common/images/poweredby_mediawiki_88x31.png"
2420 "url" => "http://www.mediawiki.org/",
2421 "alt" => "Powered by MediaWiki",
2427 * Login / create account link behavior when it's possible for anonymous users to create an account
2428 * true = use a combined login / create account link
2429 * false = split login and create account into two separate links
2431 $wgUseCombinedLoginLink = true;
2434 * Search form behavior for Vector skin only
2435 * true = use an icon search button
2436 * false = use Go & Search buttons
2438 $wgVectorUseSimpleSearch = false;
2441 * Watch and unwatch as an icon rather than a link for Vector skin only
2442 * true = use an icon watch/unwatch button
2443 * false = use watch/unwatch text link
2445 $wgVectorUseIconWatch = false;
2448 * Show the name of the current variant as a label in the variants drop-down menu
2450 $wgVectorShowVariantName = false;
2453 * Display user edit counts in various prominent places.
2455 $wgEdititis = false;
2458 * Experimental better directionality support.
2460 $wgBetterDirectionality = false;
2463 /** @} */ # End of output format settings }
2465 /*************************************************************************//**
2466 * @name Resource loader settings
2471 * Client-side resource modules. Extensions should add their module definitions
2475 * $wgResourceModules['ext.myExtension'] = array(
2476 * 'scripts' => 'myExtension.js',
2477 * 'styles' => 'myExtension.css',
2478 * 'dependencies' => array( 'jquery.cookie', 'jquery.tabIndex' ),
2479 * 'localBasePath' => dirname( __FILE__ ),
2480 * 'remoteExtPath' => 'MyExtension',
2483 $wgResourceModules = array();
2486 * Maximum time in seconds to cache resources served by the resource loader
2488 $wgResourceLoaderMaxage = array(
2489 'versioned' => array(
2490 // Squid/Varnish but also any other public proxy cache between the client and MediaWiki
2491 'server' => 30 * 24 * 60 * 60, // 30 days
2492 // On the client side (e.g. in the browser cache).
2493 'client' => 30 * 24 * 60 * 60, // 30 days
2495 'unversioned' => array(
2496 'server' => 5 * 60, // 5 minutes
2497 'client' => 5 * 60, // 5 minutes
2502 * Whether to embed private modules inline with HTML output or to bypass
2503 * caching and check the user parameter against $wgUser to prevent
2504 * unauthorized access to private modules.
2506 $wgResourceLoaderInlinePrivateModules = true;
2509 * The default debug mode (on/off) for of ResourceLoader requests. This will still
2510 * be overridden when the debug URL parameter is used.
2512 $wgResourceLoaderDebug = false;
2515 * Enable embedding of certain resources using Edge Side Includes. This will
2516 * improve performance but only works if there is something in front of the
2517 * web server (e..g a Squid or Varnish server) configured to process the ESI.
2519 $wgResourceLoaderUseESI = false;
2522 * Put each statement on its own line when minifying JavaScript. This makes
2523 * debugging in non-debug mode a bit easier.
2525 $wgResourceLoaderMinifierStatementsOnOwnLine = false;
2528 * Maximum line length when minifying JavaScript. This is not a hard maximum:
2529 * the minifier will try not to produce lines longer than this, but may be
2530 * forced to do so in certain cases.
2532 $wgResourceLoaderMinifierMaxLineLength = 1000;
2535 * Whether to include the mediawiki.legacy JS library (old wikibits.js), and its
2538 $wgIncludeLegacyJavaScript = true;
2540 /** @} */ # End of resource loader settings }
2543 /*************************************************************************//**
2544 * @name Page title and interwiki link settings
2549 * Name of the project namespace. If left set to false, $wgSitename will be
2552 $wgMetaNamespace = false;
2555 * Name of the project talk namespace.
2557 * Normally you can ignore this and it will be something like
2558 * $wgMetaNamespace . "_talk". In some languages, you may want to set this
2559 * manually for grammatical reasons.
2561 $wgMetaNamespaceTalk = false;
2564 * Additional namespaces. If the namespaces defined in Language.php and
2565 * Namespace.php are insufficient, you can create new ones here, for example,
2566 * to import Help files in other languages. You can also override the namespace
2567 * names of existing namespaces. Extensions developers should use
2568 * $wgCanonicalNamespaceNames.
2570 * PLEASE NOTE: Once you delete a namespace, the pages in that namespace will
2571 * no longer be accessible. If you rename it, then you can access them through
2572 * the new namespace name.
2574 * Custom namespaces should start at 100 to avoid conflicting with standard
2575 * namespaces, and should always follow the even/odd main/talk pattern.
2577 #$wgExtraNamespaces =
2578 # array(100 => "Hilfe",
2579 # 101 => "Hilfe_Diskussion",
2581 # 103 => "Discussion_Aide"
2583 $wgExtraNamespaces = array();
2587 * These are alternate names for the primary localised namespace names, which
2588 * are defined by $wgExtraNamespaces and the language file. If a page is
2589 * requested with such a prefix, the request will be redirected to the primary
2592 * Set this to a map from namespace names to IDs.
2594 * $wgNamespaceAliases = array(
2595 * 'Wikipedian' => NS_USER,
2599 $wgNamespaceAliases = array();
2602 * Allowed title characters -- regex character class
2603 * Don't change this unless you know what you're doing
2605 * Problematic punctuation:
2606 * - []{}|# Are needed for link syntax, never enable these
2607 * - <> Causes problems with HTML escaping, don't use
2608 * - % Enabled by default, minor problems with path to query rewrite rules, see below
2609 * - + Enabled by default, but doesn't work with path to query rewrite rules, corrupted by apache
2610 * - ? Enabled by default, but doesn't work with path to PATH_INFO rewrites
2612 * All three of these punctuation problems can be avoided by using an alias, instead of a
2613 * rewrite rule of either variety.
2615 * The problem with % is that when using a path to query rewrite rule, URLs are
2616 * double-unescaped: once by Apache's path conversion code, and again by PHP. So
2617 * %253F, for example, becomes "?". Our code does not double-escape to compensate
2618 * for this, indeed double escaping would break if the double-escaped title was
2619 * passed in the query string rather than the path. This is a minor security issue
2620 * because articles can be created such that they are hard to view or edit.
2622 * In some rare cases you may wish to remove + for compatibility with old links.
2624 * Theoretically 0x80-0x9F of ISO 8859-1 should be disallowed, but
2625 * this breaks interlanguage links
2627 $wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF+";
2630 * The interwiki prefix of the current wiki, or false if it doesn't have one.
2632 $wgLocalInterwiki = false;
2635 * Expiry time for cache of interwiki table
2637 $wgInterwikiExpiry = 10800;
2639 /** Interwiki caching settings.
2640 $wgInterwikiCache specifies path to constant database file
2641 This cdb database is generated by dumpInterwiki from maintenance
2642 and has such key formats:
2643 dbname:key - a simple key (e.g. enwiki:meta)
2644 _sitename:key - site-scope key (e.g. wiktionary:meta)
2645 __global:key - global-scope key (e.g. __global:meta)
2646 __sites:dbname - site mapping (e.g. __sites:enwiki)
2647 Sites mapping just specifies site name, other keys provide
2648 "local url" data layout.
2649 $wgInterwikiScopes specify number of domains to check for messages:
2650 1 - Just wiki(db)-level
2651 2 - wiki and global levels
2653 $wgInterwikiFallbackSite - if unable to resolve from cache
2655 $wgInterwikiCache = false;
2656 $wgInterwikiScopes = 3;
2657 $wgInterwikiFallbackSite = 'wiki';
2660 * If local interwikis are set up which allow redirects,
2661 * set this regexp to restrict URLs which will be displayed
2662 * as 'redirected from' links.
2664 * It might look something like this:
2665 * $wgRedirectSources = '!^https?://[a-z-]+\.wikipedia\.org/!';
2667 * Leave at false to avoid displaying any incoming redirect markers.
2668 * This does not affect intra-wiki redirects, which don't change
2671 $wgRedirectSources = false;
2674 * Set this to false to avoid forcing the first letter of links to capitals.
2675 * WARNING: may break links! This makes links COMPLETELY case-sensitive. Links
2676 * appearing with a capital at the beginning of a sentence will *not* go to the
2677 * same place as links in the middle of a sentence using a lowercase initial.
2679 $wgCapitalLinks = true;
2682 * @since 1.16 - This can now be set per-namespace. Some special namespaces (such
2683 * as Special, see MWNamespace::$alwaysCapitalizedNamespaces for the full list) must be
2684 * true by default (and setting them has no effect), due to various things that
2685 * require them to be so. Also, since Talk namespaces need to directly mirror their
2686 * associated content namespaces, the values for those are ignored in favor of the
2687 * subject namespace's setting. Setting for NS_MEDIA is taken automatically from
2689 * EX: $wgCapitalLinkOverrides[ NS_FILE ] = false;
2691 $wgCapitalLinkOverrides = array();
2693 /** Which namespaces should support subpages?
2694 * See Language.php for a list of namespaces.
2696 $wgNamespacesWithSubpages = array(
2699 NS_USER_TALK
=> true,
2700 NS_PROJECT_TALK
=> true,
2701 NS_FILE_TALK
=> true,
2702 NS_MEDIAWIKI
=> true,
2703 NS_MEDIAWIKI_TALK
=> true,
2704 NS_TEMPLATE_TALK
=> true,
2705 NS_HELP_TALK
=> true,
2706 NS_CATEGORY_TALK
=> true
2710 * Array of namespaces which can be deemed to contain valid "content", as far
2711 * as the site statistics are concerned. Useful if additional namespaces also
2712 * contain "content" which should be considered when generating a count of the
2713 * number of articles in the wiki.
2715 $wgContentNamespaces = array( NS_MAIN
);
2718 * Max number of redirects to follow when resolving redirects.
2719 * 1 means only the first redirect is followed (default behavior).
2720 * 0 or less means no redirects are followed.
2722 $wgMaxRedirects = 1;
2725 * Array of invalid page redirect targets.
2726 * Attempting to create a redirect to any of the pages in this array
2727 * will make the redirect fail.
2728 * Userlogout is hard-coded, so it does not need to be listed here.
2729 * (bug 10569) Disallow Mypage and Mytalk as well.
2731 * As of now, this only checks special pages. Redirects to pages in
2732 * other namespaces cannot be invalidated by this variable.
2734 $wgInvalidRedirectTargets = array( 'Filepath', 'Mypage', 'Mytalk' );
2736 /** @} */ # End of title and interwiki settings }
2738 /************************************************************************//**
2739 * @name Parser settings
2740 * These settings configure the transformation from wikitext to HTML.
2745 * Parser configuration. Associative array with the following members:
2747 * class The class name
2749 * preprocessorClass The preprocessor class. Two classes are currently available:
2750 * Preprocessor_Hash, which uses plain PHP arrays for tempoarary
2751 * storage, and Preprocessor_DOM, which uses the DOM module for
2752 * temporary storage. Preprocessor_DOM generally uses less memory;
2753 * the speed of the two is roughly the same.
2755 * If this parameter is not given, it uses Preprocessor_DOM if the
2756 * DOM module is available, otherwise it uses Preprocessor_Hash.
2758 * The entire associative array will be passed through to the constructor as
2759 * the first parameter. Note that only Setup.php can use this variable --
2760 * the configuration will change at runtime via $wgParser member functions, so
2761 * the contents of this variable will be out-of-date. The variable can only be
2762 * changed during LocalSettings.php, in particular, it can't be changed during
2763 * an extension setup function.
2765 $wgParserConf = array(
2766 'class' => 'Parser',
2767 #'preprocessorClass' => 'Preprocessor_Hash',
2770 /** Maximum indent level of toc. */
2771 $wgMaxTocLevel = 999;
2774 * A complexity limit on template expansion
2776 $wgMaxPPNodeCount = 1000000;
2779 * Maximum recursion depth for templates within templates.
2780 * The current parser adds two levels to the PHP call stack for each template,
2781 * and xdebug limits the call stack to 100 by default. So this should hopefully
2782 * stop the parser before it hits the xdebug limit.
2784 $wgMaxTemplateDepth = 40;
2786 /** @see $wgMaxTemplateDepth */
2787 $wgMaxPPExpandDepth = 40;
2789 /** The external URL protocols */
2790 $wgUrlProtocols = array(
2796 'telnet://', // Well if we're going to support the above.. -ævar
2797 'nntp://', // @bug 3808 RFC 1738
2807 * If true, removes (substitutes) templates in "~~~~" signatures.
2809 $wgCleanSignatures = true;
2811 /** Whether to allow inline image pointing to other websites */
2812 $wgAllowExternalImages = false;
2815 * If the above is false, you can specify an exception here. Image URLs
2816 * that start with this string are then rendered, while all others are not.
2817 * You can use this to set up a trusted, simple repository of images.
2818 * You may also specify an array of strings to allow multiple sites
2822 * $wgAllowExternalImagesFrom = 'http://127.0.0.1/';
2823 * $wgAllowExternalImagesFrom = array( 'http://127.0.0.1/', 'http://example.com' );
2826 $wgAllowExternalImagesFrom = '';
2828 /** If $wgAllowExternalImages is false, you can allow an on-wiki
2829 * whitelist of regular expression fragments to match the image URL
2830 * against. If the image matches one of the regular expression fragments,
2831 * The image will be displayed.
2833 * Set this to true to enable the on-wiki whitelist (MediaWiki:External image whitelist)
2834 * Or false to disable it
2836 $wgEnableImageWhitelist = true;
2839 * A different approach to the above: simply allow the <img> tag to be used.
2840 * This allows you to specify alt text and other attributes, copy-paste HTML to
2841 * your wiki more easily, etc. However, allowing external images in any manner
2842 * will allow anyone with editing rights to snoop on your visitors' IP
2843 * addresses and so forth, if they wanted to, by inserting links to images on
2844 * sites they control.
2846 $wgAllowImageTag = false;
2849 * $wgUseTidy: use tidy to make sure HTML output is sane.
2850 * Tidy is a free tool that fixes broken HTML.
2851 * See http://www.w3.org/People/Raggett/tidy/
2853 * - $wgTidyBin should be set to the path of the binary and
2854 * - $wgTidyConf to the path of the configuration file.
2855 * - $wgTidyOpts can include any number of parameters.
2856 * - $wgTidyInternal controls the use of the PECL extension to use an in-
2857 * process tidy library instead of spawning a separate program.
2858 * Normally you shouldn't need to override the setting except for
2859 * debugging. To install, use 'pear install tidy' and add a line
2860 * 'extension=tidy.so' to php.ini.
2863 /** @see $wgUseTidy */
2864 $wgAlwaysUseTidy = false;
2865 /** @see $wgUseTidy */
2866 $wgTidyBin = 'tidy';
2867 /** @see $wgUseTidy */
2868 $wgTidyConf = $IP.'/includes/tidy.conf';
2869 /** @see $wgUseTidy */
2871 /** @see $wgUseTidy */
2872 $wgTidyInternal = extension_loaded( 'tidy' );
2875 * Put tidy warnings in HTML comments
2876 * Only works for internal tidy.
2878 $wgDebugTidy = false;
2880 /** Allow raw, unchecked HTML in <html>...</html> sections.
2881 * THIS IS VERY DANGEROUS on a publically editable site, so USE wgGroupPermissions
2882 * TO RESTRICT EDITING to only those that you trust
2887 * Set a default target for external links, e.g. _blank to pop up a new window
2889 $wgExternalLinkTarget = false;
2892 * If true, external URL links in wiki text will be given the
2893 * rel="nofollow" attribute as a hint to search engines that
2894 * they should not be followed for ranking purposes as they
2895 * are user-supplied and thus subject to spamming.
2897 $wgNoFollowLinks = true;
2900 * Namespaces in which $wgNoFollowLinks doesn't apply.
2901 * See Language.php for a list of namespaces.
2903 $wgNoFollowNsExceptions = array();
2906 * If this is set to an array of domains, external links to these domain names
2907 * (or any subdomains) will not be set to rel="nofollow" regardless of the
2908 * value of $wgNoFollowLinks. For instance:
2910 * $wgNoFollowDomainExceptions = array( 'en.wikipedia.org', 'wiktionary.org' );
2912 * This would add rel="nofollow" to links to de.wikipedia.org, but not
2913 * en.wikipedia.org, wiktionary.org, en.wiktionary.org, us.en.wikipedia.org,
2916 $wgNoFollowDomainExceptions = array();
2919 * Allow DISPLAYTITLE to change title display
2921 $wgAllowDisplayTitle = true;
2924 * For consistency, restrict DISPLAYTITLE to titles that normalize to the same
2927 $wgRestrictDisplayTitle = true;
2930 * Maximum number of calls per parse to expensive parser functions such as
2933 $wgExpensiveParserFunctionLimit = 100;
2936 * Preprocessor caching threshold
2938 $wgPreprocessorCacheThreshold = 1000;
2941 * Enable interwiki transcluding. Only when iw_trans=1.
2943 $wgEnableScaryTranscluding = false;
2946 * Expiry time for interwiki transclusion
2948 $wgTranscludeCacheExpiry = 3600;
2950 /** @} */ # end of parser settings }
2952 /************************************************************************//**
2958 * Under which condition should a page in the main namespace be counted
2959 * as a valid article? If $wgUseCommaCount is set to true, it will be
2960 * counted if it contains at least one comma. If it is set to false
2961 * (default), it will only be counted if it contains at least one [[wiki
2962 * link]]. See http://www.mediawiki.org/wiki/Manual:Article_count
2964 * Retroactively changing this variable will not affect
2965 * the existing count (cf. maintenance/recount.sql).
2967 $wgUseCommaCount = false;
2970 * wgHitcounterUpdateFreq sets how often page counters should be updated, higher
2971 * values are easier on the database. A value of 1 causes the counters to be
2972 * updated on every hit, any higher value n cause them to update *on average*
2973 * every n hits. Should be set to either 1 or something largish, eg 1000, for
2974 * maximum efficiency.
2976 $wgHitcounterUpdateFreq = 1;
2979 * How many days user must be idle before he is considered inactive. Will affect
2980 * the number shown on Special:Statistics and Special:ActiveUsers special page.
2981 * You might want to leave this as the default value, to provide comparable
2982 * numbers between different wikis.
2984 $wgActiveUserDays = 30;
2986 /** @} */ # End of statistics }
2988 /************************************************************************//**
2989 * @name User accounts, authentication
2993 /** For compatibility with old installations set to false */
2994 $wgPasswordSalt = true;
2997 * Specifies the minimal length of a user password. If set to 0, empty pass-
2998 * words are allowed.
3000 $wgMinimalPasswordLength = 1;
3003 * Enabes or disables JavaScript-based suggestions of password strength
3005 $wgLivePasswordStrengthChecks = false;
3008 * Whether to allow password resets ("enter some identifying data, and we'll send an email
3009 * with a temporary password you can use to get back into the account") identified by
3010 * various bits of data. Setting all of these to false (or the whole variable to false)
3011 * has the effect of disabling password resets entirely
3013 $wgPasswordResetRoutes = array(
3019 * Maximum number of Unicode characters in signature
3021 $wgMaxSigChars = 255;
3024 * Maximum number of bytes in username. You want to run the maintenance
3025 * script ./maintenance/checkUsernames.php once you have changed this value.
3027 $wgMaxNameChars = 255;
3030 * Array of usernames which may not be registered or logged in from
3031 * Maintenance scripts can still use these
3033 $wgReservedUsernames = array(
3034 'MediaWiki default', // Default 'Main Page' and MediaWiki: message pages
3035 'Conversion script', // Used for the old Wikipedia software upgrade
3036 'Maintenance script', // Maintenance scripts which perform editing, image import script
3037 'Template namespace initialisation script', // Used in 1.2->1.3 upgrade
3038 'msg:double-redirect-fixer', // Automatic double redirect fix
3039 'msg:usermessage-editor', // Default user for leaving user messages
3040 'msg:proxyblocker', // For Special:Blockme
3044 * Settings added to this array will override the default globals for the user
3045 * preferences used by anonymous visitors and newly created accounts.
3046 * For instance, to disable section editing links:
3047 * $wgDefaultUserOptions ['editsection'] = 0;
3050 $wgDefaultUserOptions = array(
3051 'ccmeonemails' => 0,
3053 'contextchars' => 50,
3054 'contextlines' => 5,
3055 'date' => 'default',
3058 'disablesuggest' => 0,
3059 'editfont' => 'default',
3060 'editondblclick' => 0,
3062 'editsectiononrightclick' => 0,
3063 'enotifminoredits' => 0,
3064 'enotifrevealaddr' => 0,
3065 'enotifusertalkpages' => 1,
3066 'enotifwatchlistpages' => 0,
3067 'extendwatchlist' => 0,
3068 'externaldiff' => 0,
3069 'externaleditor' => 0,
3071 'forceeditsummary' => 0,
3072 'gender' => 'unknown',
3074 'hidepatrolled' => 0,
3075 'highlightbroken' => 1,
3079 'minordefault' => 0,
3080 'newpageshidepatrolled' => 0,
3082 'noconvertlink' => 0,
3083 'norollbackdiff' => 0,
3084 'numberheadings' => 0,
3085 'previewonfirst' => 0,
3086 'previewontop' => 1,
3090 'rememberpassword' => 0,
3092 'searchlimit' => 20,
3093 'showhiddencats' => 0,
3094 'showjumplinks' => 1,
3095 'shownumberswatching' => 1,
3099 'stubthreshold' => 0,
3102 'uselivepreview' => 0,
3104 'watchcreations' => 0,
3105 'watchdefault' => 0,
3106 'watchdeletion' => 0,
3107 'watchlistdays' => 3.0,
3108 'watchlisthideanons' => 0,
3109 'watchlisthidebots' => 0,
3110 'watchlisthideliu' => 0,
3111 'watchlisthideminor' => 0,
3112 'watchlisthideown' => 0,
3113 'watchlisthidepatrolled' => 0,
3119 * Whether or not to allow and use real name fields.
3120 * @deprecated in 1.16, use $wgHiddenPrefs[] = 'realname' below to disable real
3123 $wgAllowRealName = true;
3125 /** An array of preferences to not show for the user */
3126 $wgHiddenPrefs = array();
3129 * Characters to prevent during new account creations.
3130 * This is used in a regular expression character class during
3131 * registration (regex metacharacters like / are escaped).
3133 $wgInvalidUsernameCharacters = '@';
3136 * Character used as a delimiter when testing for interwiki userrights
3137 * (In Special:UserRights, it is possible to modify users on different
3138 * databases if the delimiter is used, e.g. Someuser@enwiki).
3140 * It is recommended that you have this delimiter in
3141 * $wgInvalidUsernameCharacters above, or you will not be able to
3142 * modify the user rights of those users via Special:UserRights
3144 $wgUserrightsInterwikiDelimiter = '@';
3147 * Use some particular type of external authentication. The specific
3148 * authentication module you use will normally require some extra settings to
3151 * null indicates no external authentication is to be used. Otherwise,
3152 * $wgExternalAuthType must be the name of a non-abstract class that extends
3155 * Core authentication modules can be found in includes/extauth/.
3157 $wgExternalAuthType = null;
3160 * Configuration for the external authentication. This may include arbitrary
3161 * keys that depend on the authentication mechanism. For instance,
3162 * authentication against another web app might require that the database login
3163 * info be provided. Check the file where your auth mechanism is defined for
3164 * info on what to put here.
3166 $wgExternalAuthConf = array();
3169 * When should we automatically create local accounts when external accounts
3170 * already exist, if using ExternalAuth? Can have three values: 'never',
3171 * 'login', 'view'. 'view' requires the external database to support cookies,
3172 * and implies 'login'.
3174 * TODO: Implement 'view' (currently behaves like 'login').
3176 $wgAutocreatePolicy = 'login';
3179 * Policies for how each preference is allowed to be changed, in the presence
3180 * of external authentication. The keys are preference keys, e.g., 'password'
3181 * or 'emailaddress' (see Preferences.php et al.). The value can be one of the
3184 * - local: Allow changes to this pref through the wiki interface but only
3185 * apply them locally (default).
3186 * - semiglobal: Allow changes through the wiki interface and try to apply them
3187 * to the foreign database, but continue on anyway if that fails.
3188 * - global: Allow changes through the wiki interface, but only let them go
3189 * through if they successfully update the foreign database.
3190 * - message: Allow no local changes for linked accounts; replace the change
3191 * form with a message provided by the auth plugin, telling the user how to
3192 * change the setting externally (maybe providing a link, etc.). If the auth
3193 * plugin provides no message for this preference, hide it entirely.
3195 * Accounts that are not linked to an external account are never affected by
3196 * this setting. You may want to look at $wgHiddenPrefs instead.
3197 * $wgHiddenPrefs supersedes this option.
3199 * TODO: Implement message, global.
3201 $wgAllowPrefChange = array();
3204 * This is to let user authenticate using https when they come from http.
3205 * Based on an idea by George Herbert on wikitech-l:
3206 * http://lists.wikimedia.org/pipermail/wikitech-l/2010-October/050065.html
3209 $wgSecureLogin = false;
3211 /** @} */ # end user accounts }
3213 /************************************************************************//**
3214 * @name User rights, access control and monitoring
3219 * Number of seconds before autoblock entries expire. Default 86400 = 1 day.
3221 $wgAutoblockExpiry = 86400;
3224 * Set this to true to allow blocked users to edit their own user talk page.
3226 $wgBlockAllowsUTEdit = false;
3228 /** Allow sysops to ban users from accessing Emailuser */
3229 $wgSysopEmailBans = true;
3232 * Limits on the possible sizes of range blocks.
3234 * CIDR notation is hard to understand, it's easy to mistakenly assume that a
3235 * /1 is a small range and a /31 is a large range. Setting this to half the
3236 * number of bits avoids such errors.
3238 $wgBlockCIDRLimit = array(
3239 'IPv4' => 16, # Blocks larger than a /16 (64k addresses) will not be allowed
3240 'IPv6' => 64, # 2^64 = ~1.8x10^19 addresses
3244 * If true, blocked users will not be allowed to login. When using this with
3245 * a public wiki, the effect of logging out blocked users may actually be
3246 * avers: unless the user's address is also blocked (e.g. auto-block),
3247 * logging the user out will again allow reading and editing, just as for
3248 * anonymous visitors.
3250 $wgBlockDisablesLogin = false;
3253 * Pages anonymous user may see as an array, e.g.
3256 * $wgWhitelistRead = array ( "Main Page", "Wikipedia:Help");
3259 * Special:Userlogin and Special:ChangePassword are always whitelisted.
3261 * NOTE: This will only work if $wgGroupPermissions['*']['read'] is false --
3262 * see below. Otherwise, ALL pages are accessible, regardless of this setting.
3264 * Also note that this will only protect _pages in the wiki_. Uploaded files
3265 * will remain readable. You can use img_auth.php to protect uploaded files,
3266 * see http://www.mediawiki.org/wiki/Manual:Image_Authorization
3268 $wgWhitelistRead = false;
3271 * Should editors be required to have a validated e-mail
3272 * address before being allowed to edit?
3274 $wgEmailConfirmToEdit = false;
3277 * Permission keys given to users in each group.
3278 * All users are implicitly in the '*' group including anonymous visitors;
3279 * logged-in users are all implicitly in the 'user' group. These will be
3280 * combined with the permissions of all groups that a given user is listed
3281 * in in the user_groups table.
3283 * Note: Don't set $wgGroupPermissions = array(); unless you know what you're
3284 * doing! This will wipe all permissions, and may mean that your users are
3285 * unable to perform certain essential tasks or access new functionality
3286 * when new permissions are introduced and default grants established.
3288 * Functionality to make pages inaccessible has not been extensively tested
3289 * for security. Use at your own risk!
3291 * This replaces wgWhitelistAccount and wgWhitelistEdit
3293 $wgGroupPermissions = array();
3295 /** @cond file_level_code */
3296 // Implicit group for all visitors
3297 $wgGroupPermissions['*']['createaccount'] = true;
3298 $wgGroupPermissions['*']['read'] = true;
3299 $wgGroupPermissions['*']['edit'] = true;
3300 $wgGroupPermissions['*']['createpage'] = true;
3301 $wgGroupPermissions['*']['createtalk'] = true;
3302 $wgGroupPermissions['*']['writeapi'] = true;
3303 //$wgGroupPermissions['*']['patrolmarks'] = false; // let anons see what was patrolled
3305 // Implicit group for all logged-in accounts
3306 $wgGroupPermissions['user']['move'] = true;
3307 $wgGroupPermissions['user']['move-subpages'] = true;
3308 $wgGroupPermissions['user']['move-rootuserpages'] = true; // can move root userpages
3309 //$wgGroupPermissions['user']['movefile'] = true; // Disabled for now due to possible bugs and security concerns
3310 $wgGroupPermissions['user']['read'] = true;
3311 $wgGroupPermissions['user']['edit'] = true;
3312 $wgGroupPermissions['user']['createpage'] = true;
3313 $wgGroupPermissions['user']['createtalk'] = true;
3314 $wgGroupPermissions['user']['writeapi'] = true;
3315 $wgGroupPermissions['user']['upload'] = true;
3316 $wgGroupPermissions['user']['reupload'] = true;
3317 $wgGroupPermissions['user']['reupload-shared'] = true;
3318 $wgGroupPermissions['user']['minoredit'] = true;
3319 $wgGroupPermissions['user']['purge'] = true; // can use ?action=purge without clicking "ok"
3320 $wgGroupPermissions['user']['sendemail'] = true;
3322 // Implicit group for accounts that pass $wgAutoConfirmAge
3323 $wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true;
3325 // Users with bot privilege can have their edits hidden
3326 // from various log pages by default
3327 $wgGroupPermissions['bot']['bot'] = true;
3328 $wgGroupPermissions['bot']['autoconfirmed'] = true;
3329 $wgGroupPermissions['bot']['nominornewtalk'] = true;
3330 $wgGroupPermissions['bot']['autopatrol'] = true;
3331 $wgGroupPermissions['bot']['suppressredirect'] = true;
3332 $wgGroupPermissions['bot']['apihighlimits'] = true;
3333 $wgGroupPermissions['bot']['writeapi'] = true;
3334 #$wgGroupPermissions['bot']['editprotected'] = true; // can edit all protected pages without cascade protection enabled
3336 // Most extra permission abilities go to this group
3337 $wgGroupPermissions['sysop']['block'] = true;
3338 $wgGroupPermissions['sysop']['createaccount'] = true;
3339 $wgGroupPermissions['sysop']['delete'] = true;
3340 $wgGroupPermissions['sysop']['bigdelete'] = true; // can be separately configured for pages with > $wgDeleteRevisionsLimit revs
3341 $wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text
3342 $wgGroupPermissions['sysop']['deletedtext'] = true; // can view deleted revision text
3343 $wgGroupPermissions['sysop']['undelete'] = true;
3344 $wgGroupPermissions['sysop']['editinterface'] = true;
3345 $wgGroupPermissions['sysop']['editusercss'] = true;
3346 $wgGroupPermissions['sysop']['edituserjs'] = true;
3347 $wgGroupPermissions['sysop']['import'] = true;
3348 $wgGroupPermissions['sysop']['importupload'] = true;
3349 $wgGroupPermissions['sysop']['move'] = true;
3350 $wgGroupPermissions['sysop']['move-subpages'] = true;
3351 $wgGroupPermissions['sysop']['move-rootuserpages'] = true;
3352 $wgGroupPermissions['sysop']['patrol'] = true;
3353 $wgGroupPermissions['sysop']['autopatrol'] = true;
3354 $wgGroupPermissions['sysop']['protect'] = true;
3355 $wgGroupPermissions['sysop']['proxyunbannable'] = true;
3356 $wgGroupPermissions['sysop']['rollback'] = true;
3357 $wgGroupPermissions['sysop']['upload'] = true;
3358 $wgGroupPermissions['sysop']['reupload'] = true;
3359 $wgGroupPermissions['sysop']['reupload-shared'] = true;
3360 $wgGroupPermissions['sysop']['unwatchedpages'] = true;
3361 $wgGroupPermissions['sysop']['autoconfirmed'] = true;
3362 $wgGroupPermissions['sysop']['upload_by_url'] = true;
3363 $wgGroupPermissions['sysop']['ipblock-exempt'] = true;
3364 $wgGroupPermissions['sysop']['blockemail'] = true;
3365 $wgGroupPermissions['sysop']['markbotedits'] = true;
3366 $wgGroupPermissions['sysop']['apihighlimits'] = true;
3367 $wgGroupPermissions['sysop']['browsearchive'] = true;
3368 $wgGroupPermissions['sysop']['noratelimit'] = true;
3369 $wgGroupPermissions['sysop']['movefile'] = true;
3370 $wgGroupPermissions['sysop']['unblockself'] = true;
3371 $wgGroupPermissions['sysop']['suppressredirect'] = true;
3372 #$wgGroupPermissions['sysop']['mergehistory'] = true;
3373 #$wgGroupPermissions['sysop']['trackback'] = true;
3375 // Permission to change users' group assignments
3376 $wgGroupPermissions['bureaucrat']['userrights'] = true;
3377 $wgGroupPermissions['bureaucrat']['noratelimit'] = true;
3378 // Permission to change users' groups assignments across wikis
3379 #$wgGroupPermissions['bureaucrat']['userrights-interwiki'] = true;
3380 // Permission to export pages including linked pages regardless of $wgExportMaxLinkDepth
3381 #$wgGroupPermissions['bureaucrat']['override-export-depth'] = true;
3383 #$wgGroupPermissions['sysop']['deleterevision'] = true;
3384 // To hide usernames from users and Sysops
3385 #$wgGroupPermissions['suppress']['hideuser'] = true;
3386 // To hide revisions/log items from users and Sysops
3387 #$wgGroupPermissions['suppress']['suppressrevision'] = true;
3388 // For private suppression log access
3389 #$wgGroupPermissions['suppress']['suppressionlog'] = true;
3392 * The developer group is deprecated, but can be activated if need be
3393 * to use the 'lockdb' and 'unlockdb' special pages. Those require
3394 * that a lock file be defined and creatable/removable by the web
3397 # $wgGroupPermissions['developer']['siteadmin'] = true;
3402 * Permission keys revoked from users in each group.
3403 * This acts the same way as wgGroupPermissions above, except that
3404 * if the user is in a group here, the permission will be removed from them.
3406 * Improperly setting this could mean that your users will be unable to perform
3407 * certain essential tasks, so use at your own risk!
3409 $wgRevokePermissions = array();
3412 * Implicit groups, aren't shown on Special:Listusers or somewhere else
3414 $wgImplicitGroups = array( '*', 'user', 'autoconfirmed' );
3417 * A map of group names that the user is in, to group names that those users
3418 * are allowed to add or revoke.
3420 * Setting the list of groups to add or revoke to true is equivalent to "any group".
3422 * For example, to allow sysops to add themselves to the "bot" group:
3424 * $wgGroupsAddToSelf = array( 'sysop' => array( 'bot' ) );
3426 * Implicit groups may be used for the source group, for instance:
3428 * $wgGroupsRemoveFromSelf = array( '*' => true );
3430 * This allows users in the '*' group (i.e. any user) to remove themselves from
3431 * any group that they happen to be in.
3434 $wgGroupsAddToSelf = array();
3436 /** @see $wgGroupsAddToSelf */
3437 $wgGroupsRemoveFromSelf = array();
3440 * Set of available actions that can be restricted via action=protect
3441 * You probably shouldn't change this.
3442 * Translated through restriction-* messages.
3443 * Title::getRestrictionTypes() will remove restrictions that are not
3444 * applicable to a specific title (create and upload)
3446 $wgRestrictionTypes = array( 'create', 'edit', 'move', 'upload' );
3449 * Rights which can be required for each protection level (via action=protect)
3451 * You can add a new protection level that requires a specific
3452 * permission by manipulating this array. The ordering of elements
3453 * dictates the order on the protection form's lists.
3455 * - '' will be ignored (i.e. unprotected)
3456 * - 'sysop' is quietly rewritten to 'protect' for backwards compatibility
3458 $wgRestrictionLevels = array( '', 'autoconfirmed', 'sysop' );
3461 * Set the minimum permissions required to edit pages in each
3462 * namespace. If you list more than one permission, a user must
3463 * have all of them to edit pages in that namespace.
3465 * Note: NS_MEDIAWIKI is implicitly restricted to editinterface.
3467 $wgNamespaceProtection = array();
3470 * Pages in namespaces in this array can not be used as templates.
3471 * Elements must be numeric namespace ids.
3472 * Among other things, this may be useful to enforce read-restrictions
3473 * which may otherwise be bypassed by using the template machanism.
3475 $wgNonincludableNamespaces = array();
3478 * Number of seconds an account is required to age before it's given the
3479 * implicit 'autoconfirm' group membership. This can be used to limit
3480 * privileges of new accounts.
3482 * Accounts created by earlier versions of the software may not have a
3483 * recorded creation date, and will always be considered to pass the age test.
3485 * When left at 0, all registered accounts will pass.
3489 * $wgAutoConfirmAge = 600; // ten minutes
3490 * $wgAutoConfirmAge = 3600*24; // one day
3493 $wgAutoConfirmAge = 0;
3496 * Number of edits an account requires before it is autoconfirmed.
3497 * Passing both this AND the time requirement is needed. Example:
3500 * $wgAutoConfirmCount = 50;
3503 $wgAutoConfirmCount = 0;
3506 * Automatically add a usergroup to any user who matches certain conditions.
3508 * array( '&' or '|' or '^', cond1, cond2, ... )
3509 * where cond1, cond2, ... are themselves conditions; *OR*
3510 * APCOND_EMAILCONFIRMED, *OR*
3511 * array( APCOND_EMAILCONFIRMED ), *OR*
3512 * array( APCOND_EDITCOUNT, number of edits ), *OR*
3513 * array( APCOND_AGE, seconds since registration ), *OR*
3514 * array( APCOND_INGROUPS, group1, group2, ... ), *OR*
3515 * array( APCOND_ISIP, ip ), *OR*
3516 * array( APCOND_IPINRANGE, range ), *OR*
3517 * array( APCOND_AGE_FROM_EDIT, seconds since first edit ), *OR*
3518 * array( APCOND_BLOCKED ), *OR*
3519 * similar constructs defined by extensions.
3521 * If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any
3522 * user who has provided an e-mail address.
3524 $wgAutopromote = array(
3525 'autoconfirmed' => array( '&',
3526 array( APCOND_EDITCOUNT
, &$wgAutoConfirmCount ),
3527 array( APCOND_AGE
, &$wgAutoConfirmAge ),
3532 * $wgAddGroups and $wgRemoveGroups can be used to give finer control over who
3533 * can assign which groups at Special:Userrights. Example configuration:
3536 * // Bureaucrat can add any group
3537 * $wgAddGroups['bureaucrat'] = true;
3538 * // Bureaucrats can only remove bots and sysops
3539 * $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' );
3540 * // Sysops can make bots
3541 * $wgAddGroups['sysop'] = array( 'bot' );
3542 * // Sysops can disable other sysops in an emergency, and disable bots
3543 * $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' );
3546 $wgAddGroups = array();
3547 /** @see $wgAddGroups */
3548 $wgRemoveGroups = array();
3551 * A list of available rights, in addition to the ones defined by the core.
3552 * For extensions only.
3554 $wgAvailableRights = array();
3557 * Optional to restrict deletion of pages with higher revision counts
3558 * to users with the 'bigdelete' permission. (Default given to sysops.)
3560 $wgDeleteRevisionsLimit = 0;
3562 /** Number of accounts each IP address may create, 0 to disable.
3563 * Requires memcached */
3564 $wgAccountCreationThrottle = 0;
3567 * Edits matching these regular expressions in body text
3568 * will be recognised as spam and rejected automatically.
3570 * There's no administrator override on-wiki, so be careful what you set. :)
3571 * May be an array of regexes or a single string for backwards compatibility.
3573 * See http://en.wikipedia.org/wiki/Regular_expression
3574 * Note that each regex needs a beginning/end delimiter, eg: # or /
3576 $wgSpamRegex = array();
3578 /** Same as the above except for edit summaries */
3579 $wgSummarySpamRegex = array();
3582 * Similarly you can get a function to do the job. The function will be given
3583 * the following args:
3584 * - a Title object for the article the edit is made on
3585 * - the text submitted in the textarea (wpTextbox1)
3586 * - the section number.
3587 * The return should be boolean indicating whether the edit matched some evilness:
3589 * - false : let it through
3591 * @deprecated Use hooks. See SpamBlacklist extension.
3593 $wgFilterCallback = false;
3596 * Whether to use DNS blacklists in $wgDnsBlacklistUrls to check for open proxies
3599 $wgEnableDnsBlacklist = false;
3602 * @deprecated Use $wgEnableDnsBlacklist instead, only kept for backward
3605 $wgEnableSorbs = false;
3608 * List of DNS blacklists to use, if $wgEnableDnsBlacklist is true
3611 $wgDnsBlacklistUrls = array( 'http.dnsbl.sorbs.net.' );
3614 * @deprecated Use $wgDnsBlacklistUrls instead, only kept for backward
3617 $wgSorbsUrl = array();
3620 * Proxy whitelist, list of addresses that are assumed to be non-proxy despite
3621 * what the other methods might say.
3623 $wgProxyWhitelist = array();
3626 * Simple rate limiter options to brake edit floods. Maximum number actions
3627 * allowed in the given number of seconds; after that the violating client re-
3628 * ceives HTTP 500 error pages until the period elapses.
3630 * array( 4, 60 ) for a maximum of 4 hits in 60 seconds.
3632 * This option set is experimental and likely to change. Requires memcached.
3634 $wgRateLimits = array(
3636 'anon' => null, // for any and all anonymous edits (aggregate)
3637 'user' => null, // for each logged-in user
3638 'newbie' => null, // for each recent (autoconfirmed) account; overrides 'user'
3639 'ip' => null, // for each anon and recent account
3640 'subnet' => null, // ... with final octet removed
3648 'mailpassword' => array(
3651 'emailuser' => array(
3657 * Set to a filename to log rate limiter hits.
3659 $wgRateLimitLog = null;
3662 * Array of groups which should never trigger the rate limiter
3664 * @deprecated as of 1.13.0, the preferred method is using
3665 * $wgGroupPermissions[]['noratelimit']. However, this will still
3668 * $wgRateLimitsExcludedGroups = array( 'sysop', 'bureaucrat' );
3670 $wgRateLimitsExcludedGroups = array();
3673 * Array of IPs which should be excluded from rate limits.
3674 * This may be useful for whitelisting NAT gateways for conferences, etc.
3676 $wgRateLimitsExcludedIPs = array();
3679 * Log IP addresses in the recentchanges table; can be accessed only by
3680 * extensions (e.g. CheckUser) or a DB admin
3682 $wgPutIPinRC = true;
3685 * Limit password attempts to X attempts per Y seconds per IP per account.
3686 * Requires memcached.
3688 $wgPasswordAttemptThrottle = array( 'count' => 5, 'seconds' => 300 );
3690 /** @} */ # end of user rights settings
3692 /************************************************************************//**
3693 * @name Proxy scanner settings
3698 * If you enable this, every editor's IP address will be scanned for open HTTP
3701 * Don't enable this. Many sysops will report "hostile TCP port scans" to your
3702 * ISP and ask for your server to be shut down.
3704 * You have been warned.
3706 $wgBlockOpenProxies = false;
3707 /** Port we want to scan for a proxy */
3708 $wgProxyPorts = array( 80, 81, 1080, 3128, 6588, 8000, 8080, 8888, 65506 );
3709 /** Script used to scan */
3710 $wgProxyScriptPath = "$IP/maintenance/proxy_check.php";
3712 $wgProxyMemcExpiry = 86400;
3713 /** This should always be customised in LocalSettings.php */
3714 $wgSecretKey = false;
3715 /** big list of banned IP addresses, in the keys not the values */
3716 $wgProxyList = array();
3718 $wgProxyKey = false;
3720 /** @} */ # end of proxy scanner settings
3722 /************************************************************************//**
3723 * @name Cookie settings
3728 * Default cookie expiration time. Setting to 0 makes all cookies session-only.
3730 $wgCookieExpiration = 30*86400;
3733 * Set to set an explicit domain on the login cookies eg, "justthis.domain.org"
3734 * or ".any.subdomain.net"
3736 $wgCookieDomain = '';
3737 $wgCookiePath = '/';
3738 $wgCookieSecure = ($wgProto == 'https');
3739 $wgDisableCookieCheck = false;
3742 * Set $wgCookiePrefix to use a custom one. Setting to false sets the default of
3743 * using the database name.
3745 $wgCookiePrefix = false;
3748 * Set authentication cookies to HttpOnly to prevent access by JavaScript,
3749 * in browsers that support this feature. This can mitigates some classes of
3752 $wgCookieHttpOnly = true;
3755 * If the requesting browser matches a regex in this blacklist, we won't
3756 * send it cookies with HttpOnly mode, even if $wgCookieHttpOnly is on.
3758 $wgHttpOnlyBlacklist = array(
3759 // Internet Explorer for Mac; sometimes the cookies work, sometimes
3760 // they don't. It's difficult to predict, as combinations of path
3761 // and expiration options affect its parsing.
3762 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
3765 /** A list of cookies that vary the cache (for use by extensions) */
3766 $wgCacheVaryCookies = array();
3768 /** Override to customise the session name */
3769 $wgSessionName = false;
3771 /** @} */ # end of cookie settings }
3773 /************************************************************************//**
3774 * @name LaTeX (mathematical formulas)
3779 * To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory of
3780 * the MediaWiki package and have latex, dvips, gs (ghostscript), andconvert
3781 * (ImageMagick) installed and available in the PATH.
3782 * Please see math/README for more information.
3786 /* @} */ # end LaTeX }
3788 /************************************************************************//**
3789 * @name Profiling, testing and debugging
3791 * To enable profiling, edit StartProfiler.php
3797 * Filename for debug logging. See http://www.mediawiki.org/wiki/How_to_debug
3798 * The debug log file should be not be publicly accessible if it is used, as it
3799 * may contain private data.
3801 $wgDebugLogFile = '';
3804 * Prefix for debug log lines
3806 $wgDebugLogPrefix = '';
3809 * If true, instead of redirecting, show a page with a link to the redirect
3810 * destination. This allows for the inspection of PHP error messages, and easy
3811 * resubmission of form data. For developer use only.
3813 $wgDebugRedirects = false;
3816 * If true, log debugging data from action=raw.
3817 * This is normally false to avoid overlapping debug entries due to gen=css and
3820 $wgDebugRawPage = false;
3823 * Send debug data to an HTML comment in the output.
3825 * This may occasionally be useful when supporting a non-technical end-user. It's
3826 * more secure than exposing the debug log file to the web, since the output only
3827 * contains private data for the current user. But it's not ideal for development
3828 * use since data is lost on fatal errors and redirects.
3830 $wgDebugComments = false;
3833 * Write SQL queries to the debug log
3835 $wgDebugDumpSql = false;
3838 * Set to an array of log group keys to filenames.
3839 * If set, wfDebugLog() output for that group will go to that file instead
3840 * of the regular $wgDebugLogFile. Useful for enabling selective logging
3843 $wgDebugLogGroups = array();
3846 * Display debug data at the bottom of the main content area.
3848 * Useful for developers and technical users trying to working on a closed wiki.
3850 $wgShowDebug = false;
3853 * Prefix debug messages with relative timestamp. Very-poor man's profiler.
3855 $wgDebugTimestamps = false;
3858 * Print HTTP headers for every request in the debug information.
3860 $wgDebugPrintHttpHeaders = true;
3863 * Show the contents of $wgHooks in Special:Version
3865 $wgSpecialVersionShowHooks = false;
3868 * Whether to show "we're sorry, but there has been a database error" pages.
3869 * Displaying errors aids in debugging, but may display information useful
3872 $wgShowSQLErrors = false;
3875 * If set to true, uncaught exceptions will print a complete stack trace
3876 * to output. This should only be used for debugging, as it may reveal
3877 * private information in function parameters due to PHP's backtrace
3880 $wgShowExceptionDetails = false;
3883 * If true, show a backtrace for database errors
3885 $wgShowDBErrorBacktrace = false;
3888 * Expose backend server host names through the API and various HTML comments
3890 $wgShowHostnames = false;
3893 * If set to true MediaWiki will throw notices for some possible error
3894 * conditions and for deprecated functions.
3896 $wgDevelopmentWarnings = false;
3898 /** Only record profiling info for pages that took longer than this */
3899 $wgProfileLimit = 0.0;
3901 /** Don't put non-profiling info into log file */
3902 $wgProfileOnly = false;
3905 * Log sums from profiling into "profiling" table in db.
3907 * You have to create a 'profiling' table in your database before using
3908 * this feature, see maintenance/archives/patch-profiling.sql
3910 * To enable profiling, edit StartProfiler.php
3912 $wgProfileToDatabase = false;
3914 /** If true, print a raw call tree instead of per-function report */
3915 $wgProfileCallTree = false;
3917 /** Should application server host be put into profiling table */
3918 $wgProfilePerHost = false;
3921 * Host for UDP profiler.
3923 * The host should be running a daemon which can be obtained from MediaWiki
3924 * Subversion at: http://svn.wikimedia.org/svnroot/mediawiki/trunk/udpprofile
3926 $wgUDPProfilerHost = '127.0.0.1';
3929 * Port for UDP profiler.
3930 * @see $wgUDPProfilerHost
3932 $wgUDPProfilerPort = '3811';
3934 /** Detects non-matching wfProfileIn/wfProfileOut calls */
3935 $wgDebugProfiling = false;
3937 /** Output debug message on every wfProfileIn/wfProfileOut */
3938 $wgDebugFunctionEntry = 0;
3941 * Destination for wfIncrStats() data...
3942 * 'cache' to go into the system cache, if enabled (memcached)
3943 * 'udp' to be sent to the UDP profiler (see $wgUDPProfilerHost)
3946 $wgStatsMethod = 'cache';
3949 * When $wgStatsMethod is 'udp', setting this to a string allows statistics to
3950 * be aggregated over more than one wiki. The string will be used in place of
3951 * the DB name in outgoing UDP packets. If this is set to false, the DB name
3954 $wgAggregateStatsID = false;
3956 /** Whereas to count the number of time an article is viewed.
3957 * Does not work if pages are cached (for example with squid).
3959 $wgDisableCounters = false;
3962 * Support blog-style "trackbacks" for articles. See
3963 * http://www.sixapart.com/pronet/docs/trackback_spec for details.
3965 * If enabling this, you also need to grant the 'trackback' right to a group
3967 $wgUseTrackbacks = false;
3970 * Parser test suite files to be run by parserTests.php when no specific
3971 * filename is passed to it.
3973 * Extensions may add their own tests to this array, or site-local tests
3974 * may be added via LocalSettings.php
3978 $wgParserTestFiles = array(
3979 "$IP/tests/parser/parserTests.txt",
3980 "$IP/tests/parser/extraParserTests.txt"
3984 * If configured, specifies target CodeReview installation to send test
3985 * result data from 'parserTests.php --upload'
3987 * Something like this:
3988 * $wgParserTestRemote = array(
3989 * 'api-url' => 'http://www.mediawiki.org/w/api.php',
3990 * 'repo' => 'MediaWiki',
3991 * 'suite' => 'ParserTests',
3992 * 'path' => '/trunk/phase3', // not used client-side; for reference
3993 * 'secret' => 'qmoicj3mc4mcklmqw', // Shared secret used in HMAC validation
3996 $wgParserTestRemote = false;
3998 /** @} */ # end of profiling, testing and debugging }
4000 /************************************************************************//**
4006 * Set this to true to disable the full text search feature.
4008 $wgDisableTextSearch = false;
4011 * Set to true to have nicer highligted text in search results,
4012 * by default off due to execution overhead
4014 $wgAdvancedSearchHighlighting = false;
4017 * Regexp to match word boundaries, defaults for non-CJK languages
4018 * should be empty for CJK since the words are not separate
4020 $wgSearchHighlightBoundaries = '[\p{Z}\p{P}\p{C}]';
4023 * Set to true to have the search engine count total
4024 * search matches to present in the Special:Search UI.
4025 * Not supported by every search engine shipped with MW.
4027 * This could however be slow on larger wikis, and is pretty flaky
4028 * with the current title vs content split. Recommend avoiding until
4029 * that's been worked out cleanly; but this may aid in testing the
4030 * search UI and API to confirm that the result count works.
4032 $wgCountTotalSearchHits = false;
4035 * Template for OpenSearch suggestions, defaults to API action=opensearch
4037 * Sites with heavy load would tipically have these point to a custom
4038 * PHP wrapper to avoid firing up mediawiki for every keystroke
4040 * Placeholders: {searchTerms}
4043 $wgOpenSearchTemplate = false;
4046 * Enable suggestions while typing in search boxes
4047 * (results are passed around in OpenSearch format)
4048 * Requires $wgEnableOpenSearchSuggest = true;
4050 $wgEnableMWSuggest = false;
4053 * Enable OpenSearch suggestions requested by MediaWiki. Set this to
4054 * false if you've disabled MWSuggest or another suggestion script and
4055 * want reduce load caused by cached scripts pulling suggestions.
4057 $wgEnableOpenSearchSuggest = true;
4060 * Expiry time for search suggestion responses
4062 $wgSearchSuggestCacheExpiry = 1200;
4065 * Template for internal MediaWiki suggestion engine, defaults to API action=opensearch
4067 * Placeholders: {searchTerms}, {namespaces}, {dbname}
4070 $wgMWSuggestTemplate = false;
4073 * If you've disabled search semi-permanently, this also disables updates to the
4074 * table. If you ever re-enable, be sure to rebuild the search table.
4076 $wgDisableSearchUpdate = false;
4079 * List of namespaces which are searched by default. Example:
4082 * $wgNamespacesToBeSearchedDefault[NS_MAIN] = true;
4083 * $wgNamespacesToBeSearchedDefault[NS_PROJECT] = true;
4086 $wgNamespacesToBeSearchedDefault = array(
4091 * Namespaces to be searched when user clicks the "Help" tab
4094 * Same format as $wgNamespacesToBeSearchedDefault
4096 $wgNamespacesToBeSearchedHelp = array(
4102 * If set to true the 'searcheverything' preference will be effective only for logged-in users.
4103 * Useful for big wikis to maintain different search profiles for anonymous and logged-in users.
4106 $wgSearchEverythingOnlyLoggedIn = false;
4109 * Disable the internal MySQL-based search, to allow it to be
4110 * implemented by an extension instead.
4112 $wgDisableInternalSearch = false;
4115 * Set this to a URL to forward search requests to some external location.
4116 * If the URL includes '$1', this will be replaced with the URL-encoded
4119 * For example, to forward to Google you'd have something like:
4120 * $wgSearchForwardUrl = 'http://www.google.com/search?q=$1' .
4121 * '&domains=http://example.com' .
4122 * '&sitesearch=http://example.com' .
4123 * '&ie=utf-8&oe=utf-8';
4125 $wgSearchForwardUrl = null;
4128 * Search form behavior
4129 * true = use Go & Search buttons
4130 * false = use Go button & Advanced search link
4132 $wgUseTwoButtonsSearchForm = true;
4135 * Array of namespaces to generate a Google sitemap for when the
4136 * maintenance/generateSitemap.php script is run, or false if one is to be ge-
4137 * nerated for all namespaces.
4139 $wgSitemapNamespaces = false;
4141 /** @} */ # end of search settings
4143 /************************************************************************//**
4144 * @name Edit user interface
4149 * Path to the GNU diff3 utility. If the file doesn't exist, edit conflicts will
4150 * fall back to the old behaviour (no merging).
4152 $wgDiff3 = '/usr/bin/diff3';
4155 * Path to the GNU diff utility.
4157 $wgDiff = '/usr/bin/diff';
4160 * Which namespaces have special treatment where they should be preview-on-open
4161 * Internaly only Category: pages apply, but using this extensions (e.g. Semantic MediaWiki)
4162 * can specify namespaces of pages they have special treatment for
4164 $wgPreviewOnOpenNamespaces = array(
4169 * Activate external editor interface for files and pages
4170 * See http://www.mediawiki.org/wiki/Manual:External_editors
4172 $wgUseExternalEditor = true;
4174 /** Go button goes straight to the edit screen if the article doesn't exist. */
4175 $wgGoToEdit = false;
4178 * Enable the UniversalEditButton for browsers that support it
4179 * (currently only Firefox with an extension)
4180 * See http://universaleditbutton.org for more background information
4182 $wgUniversalEditButton = true;
4185 * If user doesn't specify any edit summary when making a an edit, MediaWiki
4186 * will try to automatically create one. This feature can be disabled by set-
4187 * ting this variable false.
4189 $wgUseAutomaticEditSummaries = true;
4191 /** @} */ # end edit UI }
4193 /************************************************************************//**
4195 * See also $wgSiteNotice
4200 * @cond file_level_code
4201 * Set $wgCommandLineMode if it's not set already, to avoid notices
4203 if( !isset( $wgCommandLineMode ) ) {
4204 $wgCommandLineMode = false;
4208 /** For colorized maintenance script output, is your terminal background dark ? */
4209 $wgCommandLineDarkBg = false;
4212 * Array for extensions to register their maintenance scripts with the
4213 * system. The key is the name of the class and the value is the full
4216 $wgMaintenanceScripts = array();
4219 * Set this to a string to put the wiki into read-only mode. The text will be
4220 * used as an explanation to users.
4222 * This prevents most write operations via the web interface. Cache updates may
4223 * still be possible. To prevent database writes completely, use the read_only
4229 * If this lock file exists (size > 0), the wiki will be forced into read-only mode.
4230 * Its contents will be shown to users as part of the read-only warning
4233 * Defaults to "{$wgUploadDirectory}/lock_yBgMBwiR".
4235 $wgReadOnlyFile = false;
4238 * When you run the web-based upgrade utility, it will tell you what to set
4239 * this to in order to authorize the upgrade process. It will subsequently be
4240 * used as a password, to authorize further upgrades.
4242 * For security, do not set this to a guessable string. Use the value supplied
4243 * by the install/upgrade process. To cause the upgrader to generate a new key,
4244 * delete the old key from LocalSettings.php.
4246 $wgUpgradeKey = false;
4248 /** @} */ # End of maintenance }
4250 /************************************************************************//**
4251 * @name Recent changes, new pages, watchlist and history
4256 * Recentchanges items are periodically purged; entries older than this many
4258 * Default: 13 weeks = about three months
4260 $wgRCMaxAge = 13 * 7 * 24 * 3600;
4263 * Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers
4264 * higher than what will be stored. Note that this is disabled by default
4265 * because we sometimes do have RC data which is beyond the limit for some
4266 * reason, and some users may use the high numbers to display that data which
4269 $wgRCFilterByAge = false;
4272 * List of Days and Limits options to list in the Special:Recentchanges and
4273 * Special:Recentchangeslinked pages.
4275 $wgRCLinkLimits = array( 50, 100, 250, 500 );
4276 $wgRCLinkDays = array( 1, 3, 7, 14, 30 );
4279 * Send recent changes updates via UDP. The updates will be formatted for IRC.
4280 * Set this to the IP address of the receiver.
4282 $wgRC2UDPAddress = false;
4285 * Port number for RC updates
4287 $wgRC2UDPPort = false;
4290 * Prefix to prepend to each UDP packet.
4291 * This can be used to identify the wiki. A script is available called
4292 * mxircecho.py which listens on a UDP port, and uses a prefix ending in a
4293 * tab to identify the IRC channel to send the log line to.
4295 $wgRC2UDPPrefix = '';
4298 * If this is set to true, $wgLocalInterwiki will be prepended to links in the
4299 * IRC feed. If this is set to a string, that string will be used as the prefix.
4301 $wgRC2UDPInterwikiPrefix = false;
4304 * Set to true to omit "bot" edits (by users with the bot permission) from the
4307 $wgRC2UDPOmitBots = false;
4310 * Enable user search in Special:Newpages
4311 * This is really a temporary hack around an index install bug on some Wikipedias.
4312 * Kill it once fixed.
4314 $wgEnableNewpagesUserFilter = true;
4316 /** Use RC Patrolling to check for vandalism */
4317 $wgUseRCPatrol = true;
4319 /** Use new page patrolling to check new pages on Special:Newpages */
4320 $wgUseNPPatrol = true;
4322 /** Provide syndication feeds (RSS, Atom) for, e.g., Recentchanges, Newpages */
4325 /** Set maximum number of results to return in syndication feeds (RSS, Atom) for
4326 * eg Recentchanges, Newpages. */
4329 /** _Minimum_ timeout for cached Recentchanges feed, in seconds.
4330 * A cached version will continue to be served out even if changes
4331 * are made, until this many seconds runs out since the last render.
4333 * If set to 0, feed caching is disabled. Use this for debugging only;
4334 * feed generation can be pretty slow with diffs.
4336 $wgFeedCacheTimeout = 60;
4338 /** When generating Recentchanges RSS/Atom feed, diffs will not be generated for
4339 * pages larger than this size. */
4340 $wgFeedDiffCutoff = 32768;
4342 /** Override the site's default RSS/ATOM feed for recentchanges that appears on
4343 * every page. Some sites might have a different feed they'd like to promote
4344 * instead of the RC feed (maybe like a "Recent New Articles" or "Breaking news" one).
4345 * Ex: $wgSiteFeed['format'] = "http://example.com/somefeed.xml"; Format can be one
4346 * of either 'rss' or 'atom'.
4348 $wgOverrideSiteFeed = array();
4351 * Which feed types should we provide by default? This can include 'rss',
4352 * 'atom', neither, or both.
4354 $wgAdvertisedFeedTypes = array( 'atom' );
4356 /** Show watching users in recent changes, watchlist and page history views */
4357 $wgRCShowWatchingUsers = false; # UPO
4358 /** Show watching users in Page views */
4359 $wgPageShowWatchingUsers = false;
4360 /** Show the amount of changed characters in recent changes */
4361 $wgRCShowChangedSize = true;
4364 * If the difference between the character counts of the text
4365 * before and after the edit is below that value, the value will be
4366 * highlighted on the RC page.
4368 $wgRCChangedSizeThreshold = 500;
4371 * Show "Updated (since my last visit)" marker in RC view, watchlist and history
4372 * view for watched pages with new changes */
4373 $wgShowUpdatedMarker = true;
4376 * Disable links to talk pages of anonymous users (IPs) in listings on special
4377 * pages like page history, Special:Recentchanges, etc.
4379 $wgDisableAnonTalk = false;
4382 * Enable filtering of categories in Recentchanges
4384 $wgAllowCategorizedRecentChanges = false;
4387 * Allow filtering by change tag in recentchanges, history, etc
4388 * Has no effect if no tags are defined in valid_tag.
4390 $wgUseTagFilter = true;
4392 /** @} */ # end RC/watchlist }
4394 /************************************************************************//**
4395 * @name Copyright and credits settings
4399 /** RDF metadata toggles */
4400 $wgEnableDublinCoreRdf = false;
4401 $wgEnableCreativeCommonsRdf = false;
4403 /** Override for copyright metadata.
4404 * TODO: these options need documentation
4406 $wgRightsPage = null;
4407 $wgRightsUrl = null;
4408 $wgRightsText = null;
4409 $wgRightsIcon = null;
4412 * Set to an array of metadata terms. Else they will be loaded based on $wgRightsUrl
4414 $wgLicenseTerms = false;
4417 * Set this to some HTML to override the rights icon with an arbitrary logo
4418 * @deprecated Use $wgFooterIcons['copyright']['copyright']
4420 $wgCopyrightIcon = null;
4422 /** Set this to true if you want detailed copyright information forms on Upload. */
4423 $wgUseCopyrightUpload = false;
4425 /** Set this to false if you want to disable checking that detailed copyright
4426 * information values are not empty. */
4427 $wgCheckCopyrightUpload = true;
4430 * Set this to the number of authors that you want to be credited below an
4431 * article text. Set it to zero to hide the attribution block, and a negative
4432 * number (like -1) to show all authors. Note that this will require 2-3 extra
4433 * database hits, which can have a not insignificant impact on performance for
4438 /** If there are more than $wgMaxCredits authors, show $wgMaxCredits of them.
4439 * Otherwise, link to a separate credits page. */
4440 $wgShowCreditsIfMax = true;
4442 /** @} */ # end of copyright and credits settings }
4444 /************************************************************************//**
4445 * @name Import / Export
4450 * List of interwiki prefixes for wikis we'll accept as sources for
4451 * Special:Import (for sysops). Since complete page history can be imported,
4452 * these should be 'trusted'.
4454 * If a user has the 'import' permission but not the 'importupload' permission,
4455 * they will only be able to run imports through this transwiki interface.
4457 $wgImportSources = array();
4460 * Optional default target namespace for interwiki imports.
4461 * Can use this to create an incoming "transwiki"-style queue.
4462 * Set to numeric key, not the name.
4464 * Users may override this in the Special:Import dialog.
4466 $wgImportTargetNamespace = null;
4469 * If set to false, disables the full-history option on Special:Export.
4470 * This is currently poorly optimized for long edit histories, so is
4471 * disabled on Wikimedia's sites.
4473 $wgExportAllowHistory = true;
4476 * If set nonzero, Special:Export requests for history of pages with
4477 * more revisions than this will be rejected. On some big sites things
4478 * could get bogged down by very very long pages.
4480 $wgExportMaxHistory = 0;
4483 * Return distinct author list (when not returning full history)
4485 $wgExportAllowListContributors = false ;
4488 * If non-zero, Special:Export accepts a "pagelink-depth" parameter
4489 * up to this specified level, which will cause it to include all
4490 * pages linked to from the pages you specify. Since this number
4491 * can become *insanely large* and could easily break your wiki,
4492 * it's disabled by default for now.
4494 * There's a HARD CODED limit of 5 levels of recursion to prevent a
4495 * crazy-big export from being done by someone setting the depth
4496 * number too high. In other words, last resort safety net.
4498 $wgExportMaxLinkDepth = 0;
4501 * Whether to allow the "export all pages in namespace" option
4503 $wgExportFromNamespaces = false;
4505 /** @} */ # end of import/export }
4507 /*************************************************************************//**
4513 * A list of callback functions which are called once MediaWiki is fully initialised
4515 $wgExtensionFunctions = array();
4518 * Extension functions for initialisation of skins. This is called somewhat earlier
4519 * than $wgExtensionFunctions.
4521 $wgSkinExtensionFunctions = array();
4524 * Extension messages files.
4526 * Associative array mapping extension name to the filename where messages can be
4527 * found. The file should contain variable assignments. Any of the variables
4528 * present in languages/messages/MessagesEn.php may be defined, but $messages
4529 * is the most common.
4531 * Variables defined in extensions will override conflicting variables defined
4535 * $wgExtensionMessagesFiles['ConfirmEdit'] = dirname(__FILE__).'/ConfirmEdit.i18n.php';
4538 $wgExtensionMessagesFiles = array();
4541 * Aliases for special pages provided by extensions.
4542 * @deprecated Use $specialPageAliases in a file referred to by $wgExtensionMessagesFiles
4544 $wgExtensionAliasesFiles = array();
4547 * Parser output hooks.
4548 * This is an associative array where the key is an extension-defined tag
4549 * (typically the extension name), and the value is a PHP callback.
4550 * These will be called as an OutputPageParserOutput hook, if the relevant
4551 * tag has been registered with the parser output object.
4553 * Registration is done with $pout->addOutputHook( $tag, $data ).
4555 * The callback has the form:
4556 * function outputHook( $outputPage, $parserOutput, $data ) { ... }
4558 $wgParserOutputHooks = array();
4561 * List of valid skin names.
4562 * The key should be the name in all lower case, the value should be a properly
4563 * cased name for the skin. This value will be prefixed with "Skin" to create the
4564 * class name of the skin to load, and if the skin's class cannot be found through
4565 * the autoloader it will be used to load a .php file by that name in the skins directory.
4566 * The default skins will be added later, by Skin::getSkinNames(). Use
4567 * Skin::getSkinNames() as an accessor if you wish to have access to the full list.
4569 $wgValidSkinNames = array();
4572 * Special page list.
4573 * See the top of SpecialPage.php for documentation.
4575 $wgSpecialPages = array();
4578 * Array mapping class names to filenames, for autoloading.
4580 $wgAutoloadClasses = array();
4583 * An array of extension types and inside that their names, versions, authors,
4584 * urls, descriptions and pointers to localized description msgs. Note that
4585 * the version, url, description and descriptionmsg key can be omitted.
4588 * $wgExtensionCredits[$type][] = array(
4589 * 'name' => 'Example extension',
4591 * 'path' => __FILE__,
4592 * 'author' => 'Foo Barstein',
4593 * 'url' => 'http://wwww.example.com/Example%20Extension/',
4594 * 'description' => 'An example extension',
4595 * 'descriptionmsg' => 'exampleextension-desc',
4599 * Where $type is 'specialpage', 'parserhook', 'variable', 'media' or 'other'.
4600 * Where 'descriptionmsg' can be an array with message key and parameters:
4601 * 'descriptionmsg' => array( 'exampleextension-desc', param1, param2, ... ),
4603 $wgExtensionCredits = array();
4606 * Authentication plugin.
4612 * Global list of hooks.
4613 * Add a hook by doing:
4614 * $wgHooks['event_name'][] = $function;
4616 * $wgHooks['event_name'][] = array($function, $data);
4618 * $wgHooks['event_name'][] = array($object, 'method');
4623 * Maps jobs to their handling classes; extensions
4624 * can add to this to provide custom jobs
4626 $wgJobClasses = array(
4627 'refreshLinks' => 'RefreshLinksJob',
4628 'refreshLinks2' => 'RefreshLinksJob2',
4629 'htmlCacheUpdate' => 'HTMLCacheUpdateJob',
4630 'html_cache_update' => 'HTMLCacheUpdateJob', // backwards-compatible
4631 'sendMail' => 'EmaillingJob',
4632 'enotifNotify' => 'EnotifNotifyJob',
4633 'fixDoubleRedirect' => 'DoubleRedirectJob',
4634 'uploadFromUrl' => 'UploadFromUrlJob',
4638 * Extensions of "thumbnails" that are very expensive to regenerate and should be
4639 * excluded from normal action=purge thumbnail removal.
4641 $wgExcludeFromThumbnailPurge = array();
4645 * Jobs that must be explicitly requested, i.e. aren't run by job runners unless special flags are set.
4648 * - Very long-running jobs.
4649 * - Jobs that you would never want to run as part of a page rendering request.
4650 * - Jobs that you want to run on specialized machines ( like transcoding, or a particular
4651 * machine on your cluster has 'outside' web access you could restrict uploadFromUrl )
4653 $wgJobTypesExcludedFromDefaultQueue = array();
4656 * Additional functions to be performed with updateSpecialPages.
4657 * Expensive Querypages are already updated.
4659 $wgSpecialPageCacheUpdates = array(
4660 'Statistics' => array('SiteStatsUpdate','cacheUpdate')
4664 * Hooks that are used for outputting exceptions. Format is:
4665 * $wgExceptionHooks[] = $funcname
4667 * $wgExceptionHooks[] = array( $class, $funcname )
4668 * Hooks should return strings or false
4670 $wgExceptionHooks = array();
4674 * Page property link table invalidation lists. When a page property
4675 * changes, this may require other link tables to be updated (eg
4676 * adding __HIDDENCAT__ means the hiddencat tracking category will
4677 * have been added, so the categorylinks table needs to be rebuilt).
4678 * This array can be added to by extensions.
4680 $wgPagePropLinkInvalidations = array(
4681 'hiddencat' => 'categorylinks',
4684 /** @} */ # End extensions }
4686 /*************************************************************************//**
4692 * Use experimental, DMOZ-like category browser
4694 $wgUseCategoryBrowser = false;
4697 * On category pages, show thumbnail gallery for images belonging to that
4698 * category instead of listing them as articles.
4700 $wgCategoryMagicGallery = true;
4703 * Paging limit for categories
4705 $wgCategoryPagingLimit = 200;
4708 * Specify how category names should be sorted, when listed on a category page.
4709 * A sorting scheme is also known as a collation.
4711 * Available values are:
4713 * - uppercase: Converts the category name to upper case, and sorts by that.
4715 * - uca-default: Provides access to the Unicode Collation Algorithm with
4716 * the default element table. This is a compromise collation which sorts
4717 * all languages in a mediocre way. However, it is better than "uppercase".
4719 * To use the uca-default collation, you must have PHP's intl extension
4720 * installed. See http://php.net/manual/en/intl.setup.php . The details of the
4721 * resulting collation will depend on the version of ICU installed on the
4724 * After you change this, you must run maintenance/updateCollation.php to fix
4725 * the sort keys in the database.
4727 $wgCategoryCollation = 'uppercase';
4729 /** @} */ # End categories }
4731 /*************************************************************************//**
4737 * The logging system has two levels: an event type, which describes the
4738 * general category and can be viewed as a named subset of all logs; and
4739 * an action, which is a specific kind of event that can exist in that
4742 $wgLogTypes = array( '',
4756 * This restricts log access to those who have a certain right
4757 * Users without this will not see it in the option menu and can not view it
4758 * Restricted logs are not added to recent changes
4759 * Logs should remain non-transcludable
4760 * Format: logtype => permissiontype
4762 $wgLogRestrictions = array(
4763 'suppress' => 'suppressionlog'
4767 * Show/hide links on Special:Log will be shown for these log types.
4769 * This is associative array of log type => boolean "hide by default"
4771 * See $wgLogTypes for a list of available log types.
4774 * $wgFilterLogTypes => array(
4776 * 'import' => false,
4779 * Will display show/hide links for the move and import logs. Move logs will be
4780 * hidden by default unless the link is clicked. Import logs will be shown by
4781 * default, and hidden when the link is clicked.
4783 * A message of the form log-show-hide-<type> should be added, and will be used
4784 * for the link text.
4786 $wgFilterLogTypes = array(
4791 * Lists the message key string for each log type. The localized messages
4792 * will be listed in the user interface.
4794 * Extensions with custom log types may add to this array.
4796 $wgLogNames = array(
4797 '' => 'all-logs-page',
4798 'block' => 'blocklogpage',
4799 'protect' => 'protectlogpage',
4800 'rights' => 'rightslog',
4801 'delete' => 'dellogpage',
4802 'upload' => 'uploadlogpage',
4803 'move' => 'movelogpage',
4804 'import' => 'importlogpage',
4805 'patrol' => 'patrol-log-page',
4806 'merge' => 'mergelog',
4807 'suppress' => 'suppressionlog',
4811 * Lists the message key string for descriptive text to be shown at the
4812 * top of each log type.
4814 * Extensions with custom log types may add to this array.
4816 $wgLogHeaders = array(
4817 '' => 'alllogstext',
4818 'block' => 'blocklogtext',
4819 'protect' => 'protectlogtext',
4820 'rights' => 'rightslogtext',
4821 'delete' => 'dellogpagetext',
4822 'upload' => 'uploadlogpagetext',
4823 'move' => 'movelogpagetext',
4824 'import' => 'importlogpagetext',
4825 'patrol' => 'patrol-log-header',
4826 'merge' => 'mergelogpagetext',
4827 'suppress' => 'suppressionlogtext',
4831 * Lists the message key string for formatting individual events of each
4832 * type and action when listed in the logs.
4834 * Extensions with custom log types may add to this array.
4836 $wgLogActions = array(
4837 'block/block' => 'blocklogentry',
4838 'block/unblock' => 'unblocklogentry',
4839 'block/reblock' => 'reblock-logentry',
4840 'protect/protect' => 'protectedarticle',
4841 'protect/modify' => 'modifiedarticleprotection',
4842 'protect/unprotect' => 'unprotectedarticle',
4843 'protect/move_prot' => 'movedarticleprotection',
4844 'rights/rights' => 'rightslogentry',
4845 'rights/disable' => 'disableaccount-logentry',
4846 'delete/delete' => 'deletedarticle',
4847 'delete/restore' => 'undeletedarticle',
4848 'delete/revision' => 'revdelete-logentry',
4849 'delete/event' => 'logdelete-logentry',
4850 'upload/upload' => 'uploadedimage',
4851 'upload/overwrite' => 'overwroteimage',
4852 'upload/revert' => 'uploadedimage',
4853 'move/move' => '1movedto2',
4854 'move/move_redir' => '1movedto2_redir',
4855 'import/upload' => 'import-logentry-upload',
4856 'import/interwiki' => 'import-logentry-interwiki',
4857 'merge/merge' => 'pagemerge-logentry',
4858 'suppress/revision' => 'revdelete-logentry',
4859 'suppress/file' => 'revdelete-logentry',
4860 'suppress/event' => 'logdelete-logentry',
4861 'suppress/delete' => 'suppressedarticle',
4862 'suppress/block' => 'blocklogentry',
4863 'suppress/reblock' => 'reblock-logentry',
4864 'patrol/patrol' => 'patrol-log-line',
4868 * The same as above, but here values are names of functions,
4870 * @see LogPage::actionText
4872 $wgLogActionsHandlers = array();
4875 * Maintain a log of newusers at Log/newusers?
4877 $wgNewUserLog = true;
4879 /** @} */ # end logging }
4881 /*************************************************************************//**
4882 * @name Special pages (general and miscellaneous)
4887 * Allow special page inclusions such as {{Special:Allpages}}
4889 $wgAllowSpecialInclusion = true;
4892 * Set this to an array of special page names to prevent
4893 * maintenance/updateSpecialPages.php from updating those pages.
4895 $wgDisableQueryPageUpdate = false;
4898 * List of special pages, followed by what subtitle they should go under
4899 * at Special:SpecialPages
4901 $wgSpecialPageGroups = array(
4902 'DoubleRedirects' => 'maintenance',
4903 'BrokenRedirects' => 'maintenance',
4904 'Lonelypages' => 'maintenance',
4905 'Uncategorizedpages' => 'maintenance',
4906 'Uncategorizedcategories' => 'maintenance',
4907 'Uncategorizedimages' => 'maintenance',
4908 'Uncategorizedtemplates' => 'maintenance',
4909 'Unusedcategories' => 'maintenance',
4910 'Unusedimages' => 'maintenance',
4911 'Protectedpages' => 'maintenance',
4912 'Protectedtitles' => 'maintenance',
4913 'Unusedtemplates' => 'maintenance',
4914 'Withoutinterwiki' => 'maintenance',
4915 'Longpages' => 'maintenance',
4916 'Shortpages' => 'maintenance',
4917 'Ancientpages' => 'maintenance',
4918 'Deadendpages' => 'maintenance',
4919 'Wantedpages' => 'maintenance',
4920 'Wantedcategories' => 'maintenance',
4921 'Wantedfiles' => 'maintenance',
4922 'Wantedtemplates' => 'maintenance',
4923 'Unwatchedpages' => 'maintenance',
4924 'Fewestrevisions' => 'maintenance',
4926 'Userlogin' => 'login',
4927 'Userlogout' => 'login',
4928 'CreateAccount' => 'login',
4930 'Recentchanges' => 'changes',
4931 'Recentchangeslinked' => 'changes',
4932 'Watchlist' => 'changes',
4933 'Newimages' => 'changes',
4934 'Newpages' => 'changes',
4936 'Tags' => 'changes',
4938 'Upload' => 'media',
4939 'Listfiles' => 'media',
4940 'MIMEsearch' => 'media',
4941 'FileDuplicateSearch' => 'media',
4942 'Filepath' => 'media',
4944 'Listusers' => 'users',
4945 'Activeusers' => 'users',
4946 'Listgrouprights' => 'users',
4947 'BlockList' => 'users',
4948 'Contributions' => 'users',
4949 'Emailuser' => 'users',
4950 'Listadmins' => 'users',
4951 'Listbots' => 'users',
4952 'Userrights' => 'users',
4954 'Unblock' => 'users',
4955 'Preferences' => 'users',
4956 'ChangePassword' => 'users',
4957 'DeletedContributions' => 'users',
4959 'Mostlinked' => 'highuse',
4960 'Mostlinkedcategories' => 'highuse',
4961 'Mostlinkedtemplates' => 'highuse',
4962 'Mostcategories' => 'highuse',
4963 'Mostimages' => 'highuse',
4964 'Mostrevisions' => 'highuse',
4966 'Allpages' => 'pages',
4967 'Prefixindex' => 'pages',
4968 'Listredirects' => 'pages',
4969 'Categories' => 'pages',
4970 'Disambiguations' => 'pages',
4972 'Randompage' => 'redirects',
4973 'Randomredirect' => 'redirects',
4974 'Mypage' => 'redirects',
4975 'Mytalk' => 'redirects',
4976 'Mycontributions' => 'redirects',
4977 'Search' => 'redirects',
4978 'LinkSearch' => 'redirects',
4980 'ComparePages' => 'pagetools',
4981 'Movepage' => 'pagetools',
4982 'MergeHistory' => 'pagetools',
4983 'Revisiondelete' => 'pagetools',
4984 'Undelete' => 'pagetools',
4985 'Export' => 'pagetools',
4986 'Import' => 'pagetools',
4987 'Whatlinkshere' => 'pagetools',
4989 'Statistics' => 'wiki',
4990 'Version' => 'wiki',
4992 'Unlockdb' => 'wiki',
4993 'Allmessages' => 'wiki',
4994 'Popularpages' => 'wiki',
4996 'Specialpages' => 'other',
4997 'Blockme' => 'other',
4998 'Booksources' => 'other',
5001 /** Whether or not to sort special pages in Special:Specialpages */
5003 $wgSortSpecialPages = true;
5006 * Filter for Special:Randompage. Part of a WHERE clause
5007 * @deprecated as of 1.16, use the SpecialRandomGetRandomTitle hook
5009 $wgExtraRandompageSQL = false;
5012 * On Special:Unusedimages, consider images "used", if they are put
5013 * into a category. Default (false) is not to count those as used.
5015 $wgCountCategorizedImagesAsUsed = false;
5018 * Maximum number of links to a redirect page listed on
5019 * Special:Whatlinkshere/RedirectDestination
5021 $wgMaxRedirectLinksRetrieved = 500;
5023 /** @} */ # end special pages }
5025 /*************************************************************************//**
5031 * Array of allowed values for the title=foo&action=<action> parameter. Syntax is:
5032 * 'foo' => 'ClassName' Load the specified class which subclasses Action
5033 * 'foo' => true Load the class FooAction which subclasses Action
5034 * 'foo' => false The action is disabled; show an error message
5035 * Unsetting core actions will probably cause things to complain loudly.
5045 * Array of disabled article actions, e.g. view, edit, dublincore, delete, etc.
5046 * @deprecated since 1.18; just set $wgActions['action'] = false instead
5048 $wgDisabledActions = array();
5051 * Allow the "info" action, very inefficient at the moment
5053 $wgAllowPageInfo = false;
5055 /** @} */ # end actions }
5057 /*************************************************************************//**
5058 * @name Robot (search engine crawler) policy
5059 * See also $wgNoFollowLinks.
5064 * Default robot policy. The default policy is to encourage indexing and fol-
5065 * lowing of links. It may be overridden on a per-namespace and/or per-page
5068 $wgDefaultRobotPolicy = 'index,follow';
5071 * Robot policies per namespaces. The default policy is given above, the array
5072 * is made of namespace constants as defined in includes/Defines.php. You can-
5073 * not specify a different default policy for NS_SPECIAL: it is always noindex,
5074 * nofollow. This is because a number of special pages (e.g., ListPages) have
5075 * many permutations of options that display the same data under redundant
5076 * URLs, so search engine spiders risk getting lost in a maze of twisty special
5077 * pages, all alike, and never reaching your actual content.
5080 * $wgNamespaceRobotPolicies = array( NS_TALK => 'noindex' );
5082 $wgNamespaceRobotPolicies = array();
5085 * Robot policies per article. These override the per-namespace robot policies.
5086 * Must be in the form of an array where the key part is a properly canonical-
5087 * ised text form title and the value is a robot policy.
5089 * $wgArticleRobotPolicies = array( 'Main Page' => 'noindex,follow',
5090 * 'User:Bob' => 'index,follow' );
5091 * Example that DOES NOT WORK because the names are not canonical text forms:
5092 * $wgArticleRobotPolicies = array(
5093 * # Underscore, not space!
5094 * 'Main_Page' => 'noindex,follow',
5095 * # "Project", not the actual project name!
5096 * 'Project:X' => 'index,follow',
5097 * # Needs to be "Abc", not "abc" (unless $wgCapitalLinks is false for that namespace)!
5098 * 'abc' => 'noindex,nofollow'
5101 $wgArticleRobotPolicies = array();
5104 * An array of namespace keys in which the __INDEX__/__NOINDEX__ magic words
5105 * will not function, so users can't decide whether pages in that namespace are
5106 * indexed by search engines. If set to null, default to $wgContentNamespaces.
5108 * $wgExemptFromUserRobotsControl = array( NS_MAIN, NS_TALK, NS_PROJECT );
5110 $wgExemptFromUserRobotsControl = null;
5112 /** @} */ # End robot policy }
5114 /************************************************************************//**
5115 * @name AJAX and API
5116 * Note: The AJAX entry point which this section refers to is gradually being
5117 * replaced by the API entry point, api.php. They are essentially equivalent.
5118 * Both of them are used for dynamic client-side features, via XHR.
5123 * Enable the MediaWiki API for convenient access to
5124 * machine-readable data via api.php
5126 * See http://www.mediawiki.org/wiki/API
5128 $wgEnableAPI = true;
5131 * Allow the API to be used to perform write operations
5132 * (page edits, rollback, etc.) when an authorised user
5135 $wgEnableWriteAPI = true;
5138 * API module extensions
5139 * Associative array mapping module name to class name.
5140 * Extension modules may override the core modules.
5142 $wgAPIModules = array();
5143 $wgAPIMetaModules = array();
5144 $wgAPIPropModules = array();
5145 $wgAPIListModules = array();
5148 * Maximum amount of rows to scan in a DB query in the API
5149 * The default value is generally fine
5151 $wgAPIMaxDBRows = 5000;
5154 * The maximum size (in bytes) of an API result.
5155 * Don't set this lower than $wgMaxArticleSize*1024
5157 $wgAPIMaxResultSize = 8388608;
5160 * The maximum number of uncached diffs that can be retrieved in one API
5161 * request. Set this to 0 to disable API diffs altogether
5163 $wgAPIMaxUncachedDiffs = 1;
5166 * Log file or URL (TCP or UDP) to log API requests to, or false to disable
5167 * API request logging
5169 $wgAPIRequestLog = false;
5172 * Set the timeout for the API help text cache. If set to 0, caching disabled
5174 $wgAPICacheHelpTimeout = 60*60;
5177 * Enable AJAX framework
5182 * List of Ajax-callable functions.
5183 * Extensions acting as Ajax callbacks must register here
5185 $wgAjaxExportList = array( 'wfAjaxGetFileUrl' );
5188 * Enable watching/unwatching pages using AJAX.
5189 * Requires $wgUseAjax to be true too.
5191 $wgAjaxWatch = true;
5194 * Enable AJAX check for file overwrite, pre-upload
5196 $wgAjaxUploadDestCheck = true;
5199 * Enable previewing licences via AJAX. Also requires $wgEnableAPI to be true.
5201 $wgAjaxLicensePreview = true;
5204 * Settings for incoming cross-site AJAX requests:
5205 * Newer browsers support cross-site AJAX when the target resource allows requests
5206 * from the origin domain by the Access-Control-Allow-Origin header.
5207 * This is currently only used by the API (requests to api.php)
5208 * $wgCrossSiteAJAXdomains can be set using a wildcard syntax:
5210 * '*' matches any number of characters
5211 * '?' matches any 1 character
5214 $wgCrossSiteAJAXdomains = array(
5215 'www.mediawiki.org',
5222 $wgCrossSiteAJAXdomains = array();
5225 * Domains that should not be allowed to make AJAX requests,
5226 * even if they match one of the domains allowed by $wgCrossSiteAJAXdomains
5227 * Uses the same syntax as $wgCrossSiteAJAXdomains
5230 $wgCrossSiteAJAXdomainExceptions = array();
5232 /** @} */ # End AJAX and API }
5234 /************************************************************************//**
5235 * @name Shell and process control
5240 * Maximum amount of virtual memory available to shell processes under linux, in KB.
5242 $wgMaxShellMemory = 102400;
5245 * Maximum file size created by shell processes under linux, in KB
5246 * ImageMagick convert for example can be fairly hungry for scratch space
5248 $wgMaxShellFileSize = 102400;
5251 * Maximum CPU time in seconds for shell processes under linux
5253 $wgMaxShellTime = 180;
5256 * Executable path of the PHP cli binary (php/php5). Should be set up on install.
5258 $wgPhpCli = '/usr/bin/php';
5261 * Locale for LC_CTYPE, to work around http://bugs.php.net/bug.php?id=45132
5262 * For Unix-like operating systems, set this to to a locale that has a UTF-8
5263 * character set. Only the character set is relevant.
5265 $wgShellLocale = 'en_US.utf8';
5267 /** @} */ # End shell }
5269 /************************************************************************//**
5275 * Timeout for HTTP requests done internally
5277 $wgHTTPTimeout = 25;
5280 * Timeout for Asynchronous (background) HTTP requests
5282 $wgAsyncHTTPTimeout = 25;
5285 * Proxy to use for CURL requests.
5287 $wgHTTPProxy = false;
5289 /** @} */ # End HTTP client }
5291 /************************************************************************//**
5293 * See also $wgEnotifUseJobQ.
5298 * Number of jobs to perform per request. May be less than one in which case
5299 * jobs are performed probabalistically. If this is zero, jobs will not be done
5300 * during ordinary apache requests. In this case, maintenance/runJobs.php should
5301 * be run periodically.
5306 * Number of rows to update per job
5308 $wgUpdateRowsPerJob = 500;
5311 * Number of rows to update per query
5313 $wgUpdateRowsPerQuery = 100;
5315 /** @} */ # End job queue }
5317 /************************************************************************//**
5318 * @name Miscellaneous
5322 /** Name of the external diff engine to use */
5323 $wgExternalDiffEngine = false;
5326 * Disable redirects to special pages and interwiki redirects, which use a 302
5327 * and have no "redirected from" link. Note this is only for articles with #Redirect
5328 * in them. URL's containing a local interwiki prefix (or a non-canonical special
5329 * page name) are still hard redirected regardless of this setting.
5331 $wgDisableHardRedirects = false;
5334 * LinkHolderArray batch size
5337 $wgLinkHolderBatchSize = 1000;
5340 * By default MediaWiki does not register links pointing to same server in externallinks dataset,
5341 * use this value to override:
5343 $wgRegisterInternalExternals = false;
5346 * Maximum number of pages to move at once when moving subpages with a page.
5348 $wgMaximumMovedPages = 100;
5351 * Fix double redirects after a page move.
5352 * Tends to conflict with page move vandalism, use only on a private wiki.
5354 $wgFixDoubleRedirects = false;
5357 * Allow redirection to another page when a user logs in.
5358 * To enable, set to a string like 'Main Page'
5360 $wgRedirectOnLogin = null;
5363 * Configuration for processing pool control, for use in high-traffic wikis.
5364 * An implementation is provided in the PoolCounter extension.
5366 * This configuration array maps pool types to an associative array. The only
5367 * defined key in the associative array is "class", which gives the class name.
5368 * The remaining elements are passed through to the class as constructor
5369 * parameters. Example:
5371 * $wgPoolCounterConf = array( 'ArticleView' => array(
5372 * 'class' => 'PoolCounter_Client',
5373 * 'timeout' => 15, // wait timeout in seconds
5374 * 'workers' => 5, // maximum number of active threads in each pool
5375 * 'maxqueue' => 50, // maximum number of total threads in each pool
5376 * ... any extension-specific options...
5379 $wgPoolCounterConf = null;
5382 * To disable file delete/restore temporarily
5384 $wgUploadMaintenance = false;
5387 * Allows running of selenium tests via maintenance/tests/RunSeleniumTests.php
5389 $wgEnableSelenium = false;
5390 $wgSeleniumTestConfigs = array();
5391 $wgSeleniumConfigFile = null;
5392 $wgDBtestuser = ''; //db user that has permission to create and drop the test databases only
5393 $wgDBtestpassword = '';
5396 * For really cool vim folding this needs to be at the end:
5397 * vim: foldmarker=@{,@} foldmethod=marker