" */ use IPSet\IPSet; // Some regex definition to "play" with IP address and IP address ranges // An IPv4 address is made of 4 bytes from x00 to xFF which is d0 to d255 define( 'RE_IP_BYTE', '(25[0-5]|2[0-4][0-9]|1[0-9][0-9]|0?[0-9]?[0-9])' ); define( 'RE_IP_ADD', RE_IP_BYTE . '\.' . RE_IP_BYTE . '\.' . RE_IP_BYTE . '\.' . RE_IP_BYTE ); // An IPv4 range is an IP address and a prefix (d1 to d32) define( 'RE_IP_PREFIX', '(3[0-2]|[12]?\d)' ); define( 'RE_IP_RANGE', RE_IP_ADD . '\/' . RE_IP_PREFIX ); // An IPv6 address is made up of 8 words (each x0000 to xFFFF). // However, the "::" abbreviation can be used on consecutive x0000 words. define( 'RE_IPV6_WORD', '([0-9A-Fa-f]{1,4})' ); define( 'RE_IPV6_PREFIX', '(12[0-8]|1[01][0-9]|[1-9]?\d)' ); define( 'RE_IPV6_ADD', '(?:' . // starts with "::" (including "::") ':(?::|(?::' . RE_IPV6_WORD . '){1,7})' . '|' . // ends with "::" (except "::") RE_IPV6_WORD . '(?::' . RE_IPV6_WORD . '){0,6}::' . '|' . // contains one "::" in the middle (the ^ makes the test fail if none found) RE_IPV6_WORD . '(?::((?(-1)|:))?' . RE_IPV6_WORD . '){1,6}(?(-2)|^)' . '|' . // contains no "::" RE_IPV6_WORD . '(?::' . RE_IPV6_WORD . '){7}' . ')' ); // An IPv6 range is an IP address and a prefix (d1 to d128) define( 'RE_IPV6_RANGE', RE_IPV6_ADD . '\/' . RE_IPV6_PREFIX ); // For IPv6 canonicalization (NOT for strict validation; these are quite lax!) define( 'RE_IPV6_GAP', ':(?:0+:)*(?::(?:0+:)*)?' ); define( 'RE_IPV6_V4_PREFIX', '0*' . RE_IPV6_GAP . '(?:ffff:)?' ); // This might be useful for regexps used elsewhere, matches any IPv4 or IPv6 address or network define( 'IP_ADDRESS_STRING', '(?:' . RE_IP_ADD . '(?:\/' . RE_IP_PREFIX . ')?' . // IPv4 '|' . RE_IPV6_ADD . '(?:\/' . RE_IPV6_PREFIX . ')?' . // IPv6 ')' ); /** * A collection of public static functions to play with IP address * and IP ranges. */ class IP { /** * Determine if a string is as valid IP address or network (CIDR prefix). * SIIT IPv4-translated addresses are rejected. * @note canonicalize() tries to convert translated addresses to IPv4. * * @param string $ip Possible IP address * @return bool */ public static function isIPAddress( $ip ) { return (bool)preg_match( '/^' . IP_ADDRESS_STRING . '$/', $ip ); } /** * Given a string, determine if it as valid IP in IPv6 only. * @note Unlike isValid(), this looks for networks too. * * @param string $ip Possible IP address * @return bool */ public static function isIPv6( $ip ) { return (bool)preg_match( '/^' . RE_IPV6_ADD . '(?:\/' . RE_IPV6_PREFIX . ')?$/', $ip ); } /** * Given a string, determine if it as valid IP in IPv4 only. * @note Unlike isValid(), this looks for networks too. * * @param string $ip Possible IP address * @return bool */ public static function isIPv4( $ip ) { return (bool)preg_match( '/^' . RE_IP_ADD . '(?:\/' . RE_IP_PREFIX . ')?$/', $ip ); } /** * Validate an IP address. Ranges are NOT considered valid. * SIIT IPv4-translated addresses are rejected. * @note canonicalize() tries to convert translated addresses to IPv4. * * @param string $ip * @return bool True if it is valid */ public static function isValid( $ip ) { return ( preg_match( '/^' . RE_IP_ADD . '$/', $ip ) || preg_match( '/^' . RE_IPV6_ADD . '$/', $ip ) ); } /** * Validate an IP range (valid address with a valid CIDR prefix). * SIIT IPv4-translated addresses are rejected. * @note canonicalize() tries to convert translated addresses to IPv4. * * @deprecated since 1.30. Use the equivalent IP::isValidRange(). * @param string $ipRange * @return bool True if it is valid */ public static function isValidBlock( $ipRange ) { return self::isValidRange( $ipRange ); } /** * Validate an IP range (valid address with a valid CIDR prefix). * SIIT IPv4-translated addresses are rejected. * @note canonicalize() tries to convert translated addresses to IPv4. * * @param string $ipRange * @return bool True if it is valid * @since 1.30 */ public static function isValidRange( $ipRange ) { return ( preg_match( '/^' . RE_IPV6_RANGE . '$/', $ipRange ) || preg_match( '/^' . RE_IP_RANGE . '$/', $ipRange ) ); } /** * Convert an IP into a verbose, uppercase, normalized form. * Both IPv4 and IPv6 addresses are trimmed. Additionally, * IPv6 addresses in octet notation are expanded to 8 words; * IPv4 addresses have leading zeros, in each octet, removed. * * @param string $ip IP address in quad or octet form (CIDR or not). * @return string */ public static function sanitizeIP( $ip ) { $ip = trim( $ip ); if ( $ip === '' ) { return null; } /* If not an IP, just return trimmed value, since sanitizeIP() is called * in a number of contexts where usernames are supplied as input. */ if ( !self::isIPAddress( $ip ) ) { return $ip; } if ( self::isIPv4( $ip ) ) { // Remove leading 0's from octet representation of IPv4 address $ip = preg_replace( '/(?:^|(?<=\.))0+(?=[1-9]|0\.|0$)/', '', $ip ); return $ip; } // Remove any whitespaces, convert to upper case $ip = strtoupper( $ip ); // Expand zero abbreviations $abbrevPos = strpos( $ip, '::' ); if ( $abbrevPos !== false ) { // We know this is valid IPv6. Find the last index of the // address before any CIDR number (e.g. "a:b:c::/24"). $CIDRStart = strpos( $ip, "/" ); $addressEnd = ( $CIDRStart !== false ) ? $CIDRStart - 1 : strlen( $ip ) - 1; // If the '::' is at the beginning... if ( $abbrevPos == 0 ) { $repeat = '0:'; $extra = ( $ip == '::' ) ? '0' : ''; // for the address '::' $pad = 9; // 7+2 (due to '::') // If the '::' is at the end... } elseif ( $abbrevPos == ( $addressEnd - 1 ) ) { $repeat = ':0'; $extra = ''; $pad = 9; // 7+2 (due to '::') // If the '::' is in the middle... } else { $repeat = ':0'; $extra = ':'; $pad = 8; // 6+2 (due to '::') } $ip = str_replace( '::', str_repeat( $repeat, $pad - substr_count( $ip, ':' ) ) . $extra, $ip ); } // Remove leading zeros from each bloc as needed $ip = preg_replace( '/(^|:)0+(' . RE_IPV6_WORD . ')/', '$1$2', $ip ); return $ip; } /** * Prettify an IP for display to end users. * This will make it more compact and lower-case. * * @param string $ip * @return string */ public static function prettifyIP( $ip ) { $ip = self::sanitizeIP( $ip ); // normalize (removes '::') if ( self::isIPv6( $ip ) ) { // Split IP into an address and a CIDR if ( strpos( $ip, '/' ) !== false ) { list( $ip, $cidr ) = explode( '/', $ip, 2 ); } else { list( $ip, $cidr ) = [ $ip, '' ]; } // Get the largest slice of words with multiple zeros $offset = 0; $longest = $longestPos = false; while ( preg_match( '!(?:^|:)0(?::0)+(?:$|:)!', $ip, $m, PREG_OFFSET_CAPTURE, $offset ) ) { list( $match, $pos ) = $m[0]; // full match if ( strlen( $match ) > strlen( $longest ) ) { $longest = $match; $longestPos = $pos; } $offset = ( $pos + strlen( $match ) ); // advance } if ( $longest !== false ) { // Replace this portion of the string with the '::' abbreviation $ip = substr_replace( $ip, '::', $longestPos, strlen( $longest ) ); } // Add any CIDR back on if ( $cidr !== '' ) { $ip = "{$ip}/{$cidr}"; } // Convert to lower case to make it more readable $ip = strtolower( $ip ); } return $ip; } /** * Given a host/port string, like one might find in the host part of a URL * per RFC 2732, split the hostname part and the port part and return an * array with an element for each. If there is no port part, the array will * have false in place of the port. If the string was invalid in some way, * false is returned. * * This was easy with IPv4 and was generally done in an ad-hoc way, but * with IPv6 it's somewhat more complicated due to the need to parse the * square brackets and colons. * * A bare IPv6 address is accepted despite the lack of square brackets. * * @param string $both The string with the host and port * @return array|false Array normally, false on certain failures */ public static function splitHostAndPort( $both ) { if ( substr( $both, 0, 1 ) === '[' ) { if ( preg_match( '/^\[(' . RE_IPV6_ADD . ')\](?::(?P\d+))?$/', $both, $m ) ) { if ( isset( $m['port'] ) ) { return [ $m[1], intval( $m['port'] ) ]; } else { return [ $m[1], false ]; } } else { // Square bracket found but no IPv6 return false; } } $numColons = substr_count( $both, ':' ); if ( $numColons >= 2 ) { // Is it a bare IPv6 address? if ( preg_match( '/^' . RE_IPV6_ADD . '$/', $both ) ) { return [ $both, false ]; } else { // Not valid IPv6, but too many colons for anything else return false; } } if ( $numColons >= 1 ) { // Host:port? $bits = explode( ':', $both ); if ( preg_match( '/^\d+/', $bits[1] ) ) { return [ $bits[0], intval( $bits[1] ) ]; } else { // Not a valid port return false; } } // Plain hostname return [ $both, false ]; } /** * Given a host name and a port, combine them into host/port string like * you might find in a URL. If the host contains a colon, wrap it in square * brackets like in RFC 2732. If the port matches the default port, omit * the port specification * * @param string $host * @param int $port * @param bool|int $defaultPort * @return string */ public static function combineHostAndPort( $host, $port, $defaultPort = false ) { if ( strpos( $host, ':' ) !== false ) { $host = "[$host]"; } if ( $defaultPort !== false && $port == $defaultPort ) { return $host; } else { return "$host:$port"; } } /** * Convert an IPv4 or IPv6 hexadecimal representation back to readable format * * @param string $hex Number, with "v6-" prefix if it is IPv6 * @return string Quad-dotted (IPv4) or octet notation (IPv6) */ public static function formatHex( $hex ) { if ( substr( $hex, 0, 3 ) == 'v6-' ) { // IPv6 return self::hexToOctet( substr( $hex, 3 ) ); } else { // IPv4 return self::hexToQuad( $hex ); } } /** * Converts a hexadecimal number to an IPv6 address in octet notation * * @param string $ip_hex Pure hex (no v6- prefix) * @return string (of format a:b:c:d:e:f:g:h) */ public static function hexToOctet( $ip_hex ) { // Pad hex to 32 chars (128 bits) $ip_hex = str_pad( strtoupper( $ip_hex ), 32, '0', STR_PAD_LEFT ); // Separate into 8 words $ip_oct = substr( $ip_hex, 0, 4 ); for ( $n = 1; $n < 8; $n++ ) { $ip_oct .= ':' . substr( $ip_hex, 4 * $n, 4 ); } // NO leading zeroes $ip_oct = preg_replace( '/(^|:)0+(' . RE_IPV6_WORD . ')/', '$1$2', $ip_oct ); return $ip_oct; } /** * Converts a hexadecimal number to an IPv4 address in quad-dotted notation * * @param string $ip_hex Pure hex * @return string (of format a.b.c.d) */ public static function hexToQuad( $ip_hex ) { // Pad hex to 8 chars (32 bits) $ip_hex = str_pad( strtoupper( $ip_hex ), 8, '0', STR_PAD_LEFT ); // Separate into four quads $s = ''; for ( $i = 0; $i < 4; $i++ ) { if ( $s !== '' ) { $s .= '.'; } $s .= base_convert( substr( $ip_hex, $i * 2, 2 ), 16, 10 ); } return $s; } /** * Determine if an IP address really is an IP address, and if it is public, * i.e. not RFC 1918 or similar * * @param string $ip * @return bool */ public static function isPublic( $ip ) { static $privateSet = null; if ( !$privateSet ) { $privateSet = new IPSet( [ '10.0.0.0/8', # RFC 1918 (private) '172.16.0.0/12', # RFC 1918 (private) '192.168.0.0/16', # RFC 1918 (private) '0.0.0.0/8', # this network '127.0.0.0/8', # loopback 'fc00::/7', # RFC 4193 (local) '0:0:0:0:0:0:0:1', # loopback '169.254.0.0/16', # link-local 'fe80::/10', # link-local ] ); } return !$privateSet->match( $ip ); } /** * Return a zero-padded upper case hexadecimal representation of an IP address. * * Hexadecimal addresses are used because they can easily be extended to * IPv6 support. To separate the ranges, the return value from this * function for an IPv6 address will be prefixed with "v6-", a non- * hexadecimal string which sorts after the IPv4 addresses. * * @param string $ip Quad dotted/octet IP address. * @return string|bool False on failure */ public static function toHex( $ip ) { if ( self::isIPv6( $ip ) ) { $n = 'v6-' . self::IPv6ToRawHex( $ip ); } elseif ( self::isIPv4( $ip ) ) { // T62035/T97897: An IP with leading 0's fails in ip2long sometimes (e.g. *.08), // also double/triple 0 needs to be changed to just a single 0 for ip2long. $ip = self::sanitizeIP( $ip ); $n = ip2long( $ip ); if ( $n < 0 ) { $n += pow( 2, 32 ); # On 32-bit platforms (and on Windows), 2^32 does not fit into an int, # so $n becomes a float. We convert it to string instead. if ( is_float( $n ) ) { $n = (string)$n; } } if ( $n !== false ) { # Floating points can handle the conversion; faster than Wikimedia\base_convert() $n = strtoupper( str_pad( base_convert( $n, 10, 16 ), 8, '0', STR_PAD_LEFT ) ); } } else { $n = false; } return $n; } /** * Given an IPv6 address in octet notation, returns a pure hex string. * * @param string $ip Octet ipv6 IP address. * @return string|bool Pure hex (uppercase); false on failure */ private static function IPv6ToRawHex( $ip ) { $ip = self::sanitizeIP( $ip ); if ( !$ip ) { return false; } $r_ip = ''; foreach ( explode( ':', $ip ) as $v ) { $r_ip .= str_pad( $v, 4, 0, STR_PAD_LEFT ); } return $r_ip; } /** * Convert a network specification in CIDR notation * to an integer network and a number of bits * * @param string $range IP with CIDR prefix * @return array(int or string, int) */ public static function parseCIDR( $range ) { if ( self::isIPv6( $range ) ) { return self::parseCIDR6( $range ); } $parts = explode( '/', $range, 2 ); if ( count( $parts ) != 2 ) { return [ false, false ]; } list( $network, $bits ) = $parts; $network = ip2long( $network ); if ( $network !== false && is_numeric( $bits ) && $bits >= 0 && $bits <= 32 ) { if ( $bits == 0 ) { $network = 0; } else { $network &= ~( ( 1 << ( 32 - $bits ) ) - 1 ); } # Convert to unsigned if ( $network < 0 ) { $network += pow( 2, 32 ); } } else { $network = false; $bits = false; } return [ $network, $bits ]; } /** * Given a string range in a number of formats, * return the start and end of the range in hexadecimal. * * Formats are: * 1.2.3.4/24 CIDR * 1.2.3.4 - 1.2.3.5 Explicit range * 1.2.3.4 Single IP * * 2001:0db8:85a3::7344/96 CIDR * 2001:0db8:85a3::7344 - 2001:0db8:85a3::7344 Explicit range * 2001:0db8:85a3::7344 Single IP * @param string $range IP range * @return array [ string, string ] */ public static function parseRange( $range ) { // CIDR notation if ( strpos( $range, '/' ) !== false ) { if ( self::isIPv6( $range ) ) { return self::parseRange6( $range ); } list( $network, $bits ) = self::parseCIDR( $range ); if ( $network === false ) { $start = $end = false; } else { $start = sprintf( '%08X', $network ); $end = sprintf( '%08X', $network + pow( 2, ( 32 - $bits ) ) - 1 ); } // Explicit range } elseif ( strpos( $range, '-' ) !== false ) { list( $start, $end ) = array_map( 'trim', explode( '-', $range, 2 ) ); if ( self::isIPv6( $start ) && self::isIPv6( $end ) ) { return self::parseRange6( $range ); } if ( self::isIPv4( $start ) && self::isIPv4( $end ) ) { $start = self::toHex( $start ); $end = self::toHex( $end ); if ( $start > $end ) { $start = $end = false; } } else { $start = $end = false; } } else { # Single IP $start = $end = self::toHex( $range ); } if ( $start === false || $end === false ) { return [ false, false ]; } else { return [ $start, $end ]; } } /** * Convert a network specification in IPv6 CIDR notation to an * integer network and a number of bits * * @param string $range * * @return array(string, int) */ private static function parseCIDR6( $range ) { # Explode into $parts = explode( '/', self::sanitizeIP( $range ), 2 ); if ( count( $parts ) != 2 ) { return [ false, false ]; } list( $network, $bits ) = $parts; $network = self::IPv6ToRawHex( $network ); if ( $network !== false && is_numeric( $bits ) && $bits >= 0 && $bits <= 128 ) { if ( $bits == 0 ) { $network = "0"; } else { # Native 32 bit functions WONT work here!!! # Convert to a padded binary number $network = Wikimedia\base_convert( $network, 16, 2, 128 ); # Truncate the last (128-$bits) bits and replace them with zeros $network = str_pad( substr( $network, 0, $bits ), 128, 0, STR_PAD_RIGHT ); # Convert back to an integer $network = Wikimedia\base_convert( $network, 2, 10 ); } } else { $network = false; $bits = false; } return [ $network, (int)$bits ]; } /** * Given a string range in a number of formats, return the * start and end of the range in hexadecimal. For IPv6. * * Formats are: * 2001:0db8:85a3::7344/96 CIDR * 2001:0db8:85a3::7344 - 2001:0db8:85a3::7344 Explicit range * 2001:0db8:85a3::7344/96 Single IP * * @param string $range * * @return array(string, string) */ private static function parseRange6( $range ) { # Expand any IPv6 IP $range = self::sanitizeIP( $range ); // CIDR notation... if ( strpos( $range, '/' ) !== false ) { list( $network, $bits ) = self::parseCIDR6( $range ); if ( $network === false ) { $start = $end = false; } else { $start = Wikimedia\base_convert( $network, 10, 16, 32, false ); # Turn network to binary (again) $end = Wikimedia\base_convert( $network, 10, 2, 128 ); # Truncate the last (128-$bits) bits and replace them with ones $end = str_pad( substr( $end, 0, $bits ), 128, 1, STR_PAD_RIGHT ); # Convert to hex $end = Wikimedia\base_convert( $end, 2, 16, 32, false ); # see toHex() comment $start = "v6-$start"; $end = "v6-$end"; } // Explicit range notation... } elseif ( strpos( $range, '-' ) !== false ) { list( $start, $end ) = array_map( 'trim', explode( '-', $range, 2 ) ); $start = self::toHex( $start ); $end = self::toHex( $end ); if ( $start > $end ) { $start = $end = false; } } else { # Single IP $start = $end = self::toHex( $range ); } if ( $start === false || $end === false ) { return [ false, false ]; } else { return [ $start, $end ]; } } /** * Determine if a given IPv4/IPv6 address is in a given CIDR network * * @param string $addr The address to check against the given range. * @param string $range The range to check the given address against. * @return bool Whether or not the given address is in the given range. * * @note This can return unexpected results for invalid arguments! * Make sure you pass a valid IP address and IP range. */ public static function isInRange( $addr, $range ) { $hexIP = self::toHex( $addr ); list( $start, $end ) = self::parseRange( $range ); return ( strcmp( $hexIP, $start ) >= 0 && strcmp( $hexIP, $end ) <= 0 ); } /** * Determines if an IP address is a list of CIDR a.b.c.d/n ranges. * * @since 1.25 * * @param string $ip the IP to check * @param array $ranges the IP ranges, each element a range * * @return bool true if the specified adress belongs to the specified range; otherwise, false. */ public static function isInRanges( $ip, $ranges ) { foreach ( $ranges as $range ) { if ( self::isInRange( $ip, $range ) ) { return true; } } return false; } /** * Convert some unusual representations of IPv4 addresses to their * canonical dotted quad representation. * * This currently only checks a few IPV4-to-IPv6 related cases. More * unusual representations may be added later. * * @param string $addr Something that might be an IP address * @return string|null Valid dotted quad IPv4 address or null */ public static function canonicalize( $addr ) { // remove zone info (T37738) $addr = preg_replace( '/\%.*/', '', $addr ); if ( self::isValid( $addr ) ) { return $addr; } // Turn mapped addresses from ::ce:ffff:1.2.3.4 to 1.2.3.4 if ( strpos( $addr, ':' ) !== false && strpos( $addr, '.' ) !== false ) { $addr = substr( $addr, strrpos( $addr, ':' ) + 1 ); if ( self::isIPv4( $addr ) ) { return $addr; } } // IPv6 loopback address $m = []; if ( preg_match( '/^0*' . RE_IPV6_GAP . '1$/', $addr, $m ) ) { return '127.0.0.1'; } // IPv4-mapped and IPv4-compatible IPv6 addresses if ( preg_match( '/^' . RE_IPV6_V4_PREFIX . '(' . RE_IP_ADD . ')$/i', $addr, $m ) ) { return $m[1]; } if ( preg_match( '/^' . RE_IPV6_V4_PREFIX . RE_IPV6_WORD . ':' . RE_IPV6_WORD . '$/i', $addr, $m ) ) { return long2ip( ( hexdec( $m[1] ) << 16 ) + hexdec( $m[2] ) ); } return null; // give up } /** * Gets rid of unneeded numbers in quad-dotted/octet IP strings * For example, 127.111.113.151/24 -> 127.111.113.0/24 * @param string $range IP address to normalize * @return string */ public static function sanitizeRange( $range ) { list( /*...*/, $bits ) = self::parseCIDR( $range ); list( $start, /*...*/ ) = self::parseRange( $range ); $start = self::formatHex( $start ); if ( $bits === false ) { return $start; // wasn't actually a range } return "$start/$bits"; } /** * Returns the subnet of a given IP * * @param string $ip * @return string|false */ public static function getSubnet( $ip ) { $matches = []; $subnet = false; if ( self::isIPv6( $ip ) ) { $parts = self::parseRange( "$ip/64" ); $subnet = $parts[0]; } elseif ( preg_match( '/^(\d+\.\d+\.\d+)\.\d+$/', $ip, $matches ) ) { // IPv4 $subnet = $matches[1]; } return $subnet; } }