* http://www.gnu.org/copyleft/gpl.html
*
* @file
- * @author Ashar Voultoiz <hashar at free dot fr>, Aaron Schulz
+ * @author Antoine Musso <hashar at free dot fr>, Aaron Schulz
*/
// Some regex definition to "play" with IP address and IP address blocks
// An IPv4 address is made of 4 bytes from x00 to xFF which is d0 to d255
define( 'RE_IP_BYTE', '(25[0-5]|2[0-4][0-9]|1[0-9][0-9]|0?[0-9]?[0-9])' );
-define( 'RE_IP_ADD' , RE_IP_BYTE . '\.' . RE_IP_BYTE . '\.' . RE_IP_BYTE . '\.' . RE_IP_BYTE );
+define( 'RE_IP_ADD', RE_IP_BYTE . '\.' . RE_IP_BYTE . '\.' . RE_IP_BYTE . '\.' . RE_IP_BYTE );
// An IPv4 block is an IP address and a prefix (d1 to d32)
define( 'RE_IP_PREFIX', '(3[0-2]|[12]?\d)' );
define( 'RE_IP_BLOCK', RE_IP_ADD . '\/' . RE_IP_PREFIX );
define( 'RE_IPV6_WORD', '([0-9A-Fa-f]{1,4})' );
define( 'RE_IPV6_PREFIX', '(12[0-8]|1[01][0-9]|[1-9]?\d)');
define( 'RE_IPV6_ADD',
- '(' . // starts with "::" (includes the address "::")
- '(::|:(:' . RE_IPV6_WORD . '){1,7})' .
- '|' . // ends with "::" (not including the address "::")
- RE_IPV6_WORD . '(:' . RE_IPV6_WORD . '){0,6}::' .
- '|' . // has no "::"
- RE_IPV6_WORD . '(:' . RE_IPV6_WORD . '){7}' .
- '|' . // contains one "::" in the middle ("^" check always fails if no "::" found)
- RE_IPV6_WORD . '(:(?P<abbr>(?(abbr)|:))?' . RE_IPV6_WORD . '){1,6}(?(abbr)|^)' .
+ '(?:' . // starts with "::" (including "::")
+ ':(?::|(?::' . RE_IPV6_WORD . '){1,7})' .
+ '|' . // ends with "::" (except "::")
+ RE_IPV6_WORD . '(?::' . RE_IPV6_WORD . '){0,6}::' .
+ '|' . // contains one "::" in the middle, ending in "::WORD"
+ RE_IPV6_WORD . '(?::' . RE_IPV6_WORD . '){0,5}' . '::' . RE_IPV6_WORD .
+ '|' . // contains one "::" in the middle, not ending in "::WORD" (regex for PCRE 4.0+)
+ RE_IPV6_WORD . '(?::(?P<abn>:(?P<iabn>))?' . RE_IPV6_WORD . '(?!:(?P=abn))){1,5}' .
+ ':' . RE_IPV6_WORD . '(?P=iabn)' .
+ // NOTE: (?!(?P=abn)) fails iff "::" used twice; (?P=iabn) passes iff a "::" was found.
+ '|' . // contains no "::"
+ RE_IPV6_WORD . '(?::' . RE_IPV6_WORD . '){7}' .
')'
+ // NOTE: With PCRE 7.2+, we can combine the two '"::" in the middle' cases into:
+ // RE_IPV6_WORD . '(?::((?(-1)|:))?' . RE_IPV6_WORD . '){1,6}(?(-2)|^)'
+ // This also improves regex concatenation by using relative references.
);
// An IPv6 block is an IP address and a prefix (d1 to d128)
define( 'RE_IPV6_BLOCK', RE_IPV6_ADD . '\/' . RE_IPV6_PREFIX );
// This might be useful for regexps used elsewhere, matches any IPv6 or IPv6 address or network
define( 'IP_ADDRESS_STRING',
'(?:' .
- RE_IP_ADD . '(\/' . RE_IP_PREFIX . '|)' . // IPv4
+ RE_IP_ADD . '(?:\/' . RE_IP_PREFIX . ')?' . // IPv4
'|' .
- RE_IPV6_ADD . '(\/' . RE_IPV6_PREFIX . '|)' . // IPv6
+ RE_IPV6_ADD . '(?:\/' . RE_IPV6_PREFIX . ')?' . // IPv6
')'
);
* Determine if a string is as valid IP address or network (CIDR prefix).
* SIIT IPv4-translated addresses are rejected.
* Note: canonicalize() tries to convert translated addresses to IPv4.
- * @param string $ip possible IP address
- * @return bool
+ *
+ * @param $ip String: possible IP address
+ * @return Boolean
*/
public static function isIPAddress( $ip ) {
return (bool)preg_match( '/^' . IP_ADDRESS_STRING . '$/', $ip );
/**
* Given a string, determine if it as valid IP in IPv6 only.
* Note: Unlike isValid(), this looks for networks too.
- * @param string $ip possible IP address
- * @return bool
+ *
+ * @param $ip String: possible IP address
+ * @return Boolean
*/
public static function isIPv6( $ip ) {
- return (bool)preg_match( '/^' . RE_IPV6_ADD . '(\/' . RE_IPV6_PREFIX . '|)$/', $ip );
+ return (bool)preg_match( '/^' . RE_IPV6_ADD . '(?:\/' . RE_IPV6_PREFIX . ')?$/', $ip );
}
/**
* Given a string, determine if it as valid IP in IPv4 only.
* Note: Unlike isValid(), this looks for networks too.
- * @param string $ip possible IP address
- * @return bool
+ *
+ * @param $ip String: possible IP address
+ * @return Boolean
*/
public static function isIPv4( $ip ) {
- return (bool)preg_match( '/^' . RE_IP_ADD . '(\/' . RE_IP_PREFIX . '|)$/', $ip );
+ return (bool)preg_match( '/^' . RE_IP_ADD . '(?:\/' . RE_IP_PREFIX . ')?$/', $ip );
}
/**
* Validate an IP address. Ranges are NOT considered valid.
* SIIT IPv4-translated addresses are rejected.
* Note: canonicalize() tries to convert translated addresses to IPv4.
- * @param string $ip
- * @return boolean True if it is valid.
+ *
+ * @param $ip String
+ * @return Boolean: True if it is valid.
*/
public static function isValid( $ip ) {
return ( preg_match( '/^' . RE_IP_ADD . '$/', $ip )
* Validate an IP Block (valid address WITH a valid prefix).
* SIIT IPv4-translated addresses are rejected.
* Note: canonicalize() tries to convert translated addresses to IPv4.
- * @param string $ipblock
- * @return boolean True if it is valid.
+ *
+ * @param $ipblock String
+ * @return Boolean: True if it is valid.
*/
public static function isValidBlock( $ipblock ) {
return ( preg_match( '/^' . RE_IPV6_BLOCK . '$/', $ipblock )
}
/**
- * Convert an IP into a nice standard form.
+ * Convert an IP into a verbose, uppercase, normalized form.
* IPv6 addresses in octet notation are expanded to 8 words.
* IPv4 addresses are just trimmed.
- * @param string $ip IP address in quad or octet form (CIDR or not).
- * @return string
+ *
+ * @param $ip String: IP address in quad or octet form (CIDR or not).
+ * @return String
*/
public static function sanitizeIP( $ip ) {
$ip = trim( $ip );
);
}
// Remove leading zereos from each bloc as needed
- $ip = preg_replace( '/(^|:)0+' . RE_IPV6_WORD . '/', '$1$2', $ip );
+ $ip = preg_replace( '/(^|:)0+(' . RE_IPV6_WORD . ')/', '$1$2', $ip );
return $ip;
}
/**
- * Given an unsigned integer, returns an IPv6 address in octet notation
- * @param string $ip_int IP address.
+ * Prettify an IP for display to end users.
+ * This will make it more compact and lower-case.
+ *
+ * @param $ip string
+ * @return string
+ */
+ public static function prettifyIP( $ip ) {
+ $ip = self::sanitizeIP( $ip ); // normalize (removes '::')
+ if ( self::isIPv6( $ip ) ) {
+ // Split IP into an address and a CIDR
+ if ( strpos( $ip, '/' ) !== false ) {
+ list( $ip, $cidr ) = explode( '/', $ip, 2 );
+ } else {
+ list( $ip, $cidr ) = array( $ip, '' );
+ }
+ // Get the largest slice of words with multiple zeros
+ $offset = 0;
+ $longest = $longestPos = false;
+ while ( preg_match(
+ '!(?:^|:)0(?::0)+(?:$|:)!', $ip, $m, PREG_OFFSET_CAPTURE, $offset
+ ) ) {
+ list( $match, $pos ) = $m[0]; // full match
+ if ( strlen( $match ) > strlen( $longest ) ) {
+ $longest = $match;
+ $longestPos = $pos;
+ }
+ $offset += ( $pos + strlen( $match ) ); // advance
+ }
+ if ( $longest !== false ) {
+ // Replace this portion of the string with the '::' abbreviation
+ $ip = substr_replace( $ip, '::', $longestPos, strlen( $longest ) );
+ }
+ // Add any CIDR back on
+ if ( $cidr !== '' ) {
+ $ip = "{$ip}/{$cidr}";
+ }
+ // Convert to lower case to make it more readable
+ $ip = strtolower( $ip );
+ }
+ return $ip;
+ }
+
+ /**
+ * Given a host/port string, like one might find in the host part of a URL
+ * per RFC 2732, split the hostname part and the port part and return an
+ * array with an element for each. If there is no port part, the array will
+ * have false in place of the port. If the string was invalid in some way,
+ * false is returned.
+ *
+ * This was easy with IPv4 and was generally done in an ad-hoc way, but
+ * with IPv6 it's somewhat more complicated due to the need to parse the
+ * square brackets and colons.
+ *
+ * A bare IPv6 address is accepted despite the lack of square brackets.
+ *
+ * @param $both string The string with the host and port
+ * @return array
+ */
+ public static function splitHostAndPort( $both ) {
+ if ( substr( $both, 0, 1 ) === '[' ) {
+ if ( preg_match( '/^\[(' . RE_IPV6_ADD . ')\](?::(?P<port>\d+))?$/', $both, $m ) ) {
+ if ( isset( $m['port'] ) ) {
+ return array( $m[1], intval( $m['port'] ) );
+ } else {
+ return array( $m[1], false );
+ }
+ } else {
+ // Square bracket found but no IPv6
+ return false;
+ }
+ }
+ $numColons = substr_count( $both, ':' );
+ if ( $numColons >= 2 ) {
+ // Is it a bare IPv6 address?
+ if ( preg_match( '/^' . RE_IPV6_ADD . '$/', $both ) ) {
+ return array( $both, false );
+ } else {
+ // Not valid IPv6, but too many colons for anything else
+ return false;
+ }
+ }
+ if ( $numColons >= 1 ) {
+ // Host:port?
+ $bits = explode( ':', $both );
+ if ( preg_match( '/^\d+/', $bits[1] ) ) {
+ return array( $bits[0], intval( $bits[1] ) );
+ } else {
+ // Not a valid port
+ return false;
+ }
+ }
+ // Plain hostname
+ return array( $both, false );
+ }
+
+ /**
+ * Given a host name and a port, combine them into host/port string like
+ * you might find in a URL. If the host contains a colon, wrap it in square
+ * brackets like in RFC 2732. If the port matches the default port, omit
+ * the port specification
+ *
+ * @param $host string
+ * @param $port int
+ * @param $defaultPort bool|int
* @return string
*/
+ public static function combineHostAndPort( $host, $port, $defaultPort = false ) {
+ if ( strpos( $host, ':' ) !== false ) {
+ $host = "[$host]";
+ }
+ if ( $defaultPort !== false && $port == $defaultPort ) {
+ return $host;
+ } else {
+ return "$host:$port";
+ }
+ }
+
+ /**
+ * Given an unsigned integer, returns an IPv6 address in octet notation
+ *
+ * @param $ip_int String: IP address.
+ * @return String
+ */
public static function toOctet( $ip_int ) {
return self::hexToOctet( wfBaseConvert( $ip_int, 10, 16, 32, false ) );
}
/**
* Convert an IPv4 or IPv6 hexadecimal representation back to readable format
- * @param string $hex number, with "v6-" prefix if it is IPv6
- * @return string quad-dotted (IPv4) or octet notation (IPv6)
+ *
+ * @param $hex String: number, with "v6-" prefix if it is IPv6
+ * @return String: quad-dotted (IPv4) or octet notation (IPv6)
*/
public static function formatHex( $hex ) {
if ( substr( $hex, 0, 3 ) == 'v6-' ) { // IPv6
/**
* Converts a hexadecimal number to an IPv6 address in octet notation
- * @param string $ip_hex pure hex (no v6- prefix)
- * @return string (of format a:b:c:d:e:f:g:h)
+ *
+ * @param $ip_hex String: pure hex (no v6- prefix)
+ * @return String (of format a:b:c:d:e:f:g:h)
*/
public static function hexToOctet( $ip_hex ) {
// Pad hex to 32 chars (128 bits)
$ip_oct .= ':' . substr( $ip_hex, 4 * $n, 4 );
}
// NO leading zeroes
- $ip_oct = preg_replace( '/(^|:)0+' . RE_IPV6_WORD . '/', '$1$2', $ip_oct );
+ $ip_oct = preg_replace( '/(^|:)0+(' . RE_IPV6_WORD . ')/', '$1$2', $ip_oct );
return $ip_oct;
}
/**
* Converts a hexadecimal number to an IPv4 address in quad-dotted notation
- * @param string $ip_hex pure hex
- * @return string (of format a.b.c.d)
+ *
+ * @param $ip_hex String: pure hex
+ * @return String (of format a.b.c.d)
*/
public static function hexToQuad( $ip_hex ) {
// Pad hex to 8 chars (32 bits)
* Determine if an IP address really is an IP address, and if it is public,
* i.e. not RFC 1918 or similar
* Comes from ProxyTools.php
- * @param string $ip
- * @return bool
+ *
+ * @param $ip String
+ * @return Boolean
*/
public static function isPublic( $ip ) {
if ( self::isIPv6( $ip ) ) {
/**
* Determine if an IPv6 address really is an IP address, and if it is public,
* i.e. not RFC 4193 or similar
- * @param string $ip
- * @return bool
+ *
+ * @param $ip String
+ * @return Boolean
*/
private static function isPublic6( $ip ) {
static $privateRanges = false;
if ( !$privateRanges ) {
$privateRanges = array(
- array( 'fc::', 'fdff:ffff:ffff:ffff:ffff:ffff:ffff:ffff' ), # RFC 4193 (local)
+ array( 'fc00::', 'fdff:ffff:ffff:ffff:ffff:ffff:ffff:ffff' ), # RFC 4193 (local)
array( '0:0:0:0:0:0:0:1', '0:0:0:0:0:0:0:1' ), # loopback
);
}
* function for an IPv6 address will be prefixed with "v6-", a non-
* hexadecimal string which sorts after the IPv4 addresses.
*
- * @param string $ip Quad dotted/octet IP address.
- * @return string
+ * @param $ip String: quad dotted/octet IP address.
+ * @return String
*/
public static function toHex( $ip ) {
if ( self::isIPv6( $ip ) ) {
/**
* Given an IPv6 address in octet notation, returns a pure hex string.
- * @param string $ip octet ipv6 IP address.
- * @return string pure hex (uppercase)
+ *
+ * @param $ip String: octet ipv6 IP address.
+ * @return String: pure hex (uppercase)
*/
private static function IPv6ToRawHex( $ip ) {
$ip = self::sanitizeIP( $ip );
* Given an IP address in dotted-quad/octet notation, returns an unsigned integer.
* Like ip2long() except that it actually works and has a consistent error return value.
* Comes from ProxyTools.php
- * @param string $ip Quad dotted IP address.
- * @return mixed (string/int/false)
+ *
+ * @param $ip String: quad dotted IP address.
+ * @return Mixed: string/int/false
*/
public static function toUnsigned( $ip ) {
if ( self::isIPv6( $ip ) ) {
return $n;
}
+ /**
+ * @param $ip
+ * @return String
+ */
private static function toUnsigned6( $ip ) {
return wfBaseConvert( self::IPv6ToRawHex( $ip ), 16, 10 );
}
/**
* Convert a network specification in CIDR notation
* to an integer network and a number of bits
- * @param string $range IP with CIDR prefix
+ *
+ * @param $range String: IP with CIDR prefix
* @return array(int or string, int)
*/
public static function parseCIDR( $range ) {
* 2001:0db8:85a3::7344/96 CIDR
* 2001:0db8:85a3::7344 - 2001:0db8:85a3::7344 Explicit range
* 2001:0db8:85a3::7344 Single IP
- * @param string $range IP range
+ * @param $range String: IP range
* @return array(string, string)
*/
public static function parseRange( $range ) {
/**
* Convert a network specification in IPv6 CIDR notation to an
* integer network and a number of bits
+ *
+ * @param $range
+ *
* @return array(string, int)
*/
private static function parseCIDR6( $range ) {
* 2001:0db8:85a3::7344/96 CIDR
* 2001:0db8:85a3::7344 - 2001:0db8:85a3::7344 Explicit range
* 2001:0db8:85a3::7344/96 Single IP
+ *
+ * @param $range
+ *
* @return array(string, string)
*/
private static function parseRange6( $range ) {
/**
* Determine if a given IPv4/IPv6 address is in a given CIDR network
- * @param $addr The address to check against the given range.
- * @param $range The range to check the given address against.
- * @return bool Whether or not the given address is in the given range.
+ *
+ * @param $addr String: the address to check against the given range.
+ * @param $range String: the range to check the given address against.
+ * @return Boolean: whether or not the given address is in the given range.
*/
public static function isInRange( $addr, $range ) {
$hexIP = self::toHex( $addr );
* This currently only checks a few IPV4-to-IPv6 related cases. More
* unusual representations may be added later.
*
- * @param $addr something that might be an IP address
- * @return valid dotted quad IPv4 address or null
+ * @param $addr String: something that might be an IP address
+ * @return String: valid dotted quad IPv4 address or null
*/
public static function canonicalize( $addr ) {
if ( self::isValid( $addr ) ) {
// IPv6 loopback address
$m = array();
if ( preg_match( '/^0*' . RE_IPV6_GAP . '1$/', $addr, $m ) ) {
- return '127.0.0.1';
+ return '127.0.0.1';
}
// IPv4-mapped and IPv4-compatible IPv6 addresses
if ( preg_match( '/^' . RE_IPV6_V4_PREFIX . '(' . RE_IP_ADD . ')$/i', $addr, $m ) ) {
return null; // give up
}
+
+ /**
+ * Gets rid of uneeded numbers in quad-dotted/octet IP strings
+ * For example, 127.111.113.151/24 -> 127.111.113.0/24
+ * @param $range String: IP address to normalize
+ * @return string
+ */
+ public static function sanitizeRange( $range ) {
+ list( /*...*/, $bits ) = self::parseCIDR( $range );
+ list( $start, /*...*/ ) = self::parseRange( $range );
+ $start = self::formatHex( $start );
+ if ( $bits === false ) {
+ return $start; // wasn't actually a range
+ }
+ return "$start/$bits";
+ }
}