* To customize your installation, edit "LocalSettings.php". If you make
* changes here, they will be lost on next upgrade of MediaWiki!
*
- * Note that since all these string interpolations are expanded
- * before LocalSettings is included, if you localize something
- * like $wgScriptPath, you must also localize everything that
- * depends on it.
+ * In this file, variables whose default values depend on other
+ * variables are set to false. The actual default value of these variables
+ * will only be set in Setup.php, taking into account any custom settings
+ * performed in LocalSettings.php.
*
* Documentation is in the source and on:
* http://www.mediawiki.org/wiki/Manual:Configuration_settings
die( 1 );
}
-# Create a site configuration object. Not used for much in a default install
-if ( !defined( 'MW_COMPILED' ) ) {
- require_once( "$IP/includes/SiteConfiguration.php" );
-}
+# Create a site configuration object. Not used for much in a default install.
+# Note: this (and other things) will break if the autoloader is not enabled.
+# Please include includes/AutoLoader.php before including this file.
$wgConf = new SiteConfiguration;
/** @endcond */
$wgSitename = 'MediaWiki';
/**
- * URL of the server. It will be automatically built including https mode.
+ * URL of the server.
*
* Example:
* <code>
- * $wgServer = http://example.com
+ * $wgServer = 'http://example.com';
* </code>
*
* This is usually detected correctly by MediaWiki. If MediaWiki detects the
* wrong server, it will redirect incorrectly after you save a page. In that
* case, set this variable to fix it.
+ *
+ * If you want to use protocol-relative URLs on your wiki, set this to a
+ * protocol-relative URL like '//example.com' and set $wgCanonicalServer
+ * to a fully qualified URL.
*/
-$wgServer = '';
-
-/** @cond file_level_code */
-if( isset( $_SERVER['SERVER_NAME'] )
- # KLUGE: lighttpd 1.4.28 truncates IPv6 addresses at the first colon,
- # giving bogus hostnames like "[2001"; check for presence of both
- # brackets to detect this.
- && ($_SERVER['SERVER_NAME'][0] !== '[' || substr($_SERVER['SERVER_NAME'], -1) === ']')
- ) {
- $serverName = $_SERVER['SERVER_NAME'];
-} elseif( isset( $_SERVER['HOSTNAME'] ) ) {
- $serverName = $_SERVER['HOSTNAME'];
-} elseif( isset( $_SERVER['SERVER_ADDR'] ) ) {
- $serverName = $_SERVER['SERVER_ADDR'];
-} else {
- $serverName = 'localhost';
-}
-
-$wgProto = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] == 'on') ? 'https' : 'http';
+$wgServer = WebRequest::detectServer();
-$wgServer = $wgProto.'://' . $serverName;
-# If the port is a non-standard one, add it to the URL
-if( isset( $_SERVER['SERVER_PORT'] )
- && !strpos( $serverName, ':' )
- && ( ( $wgProto == 'http' && $_SERVER['SERVER_PORT'] != 80 )
- || ( $wgProto == 'https' && $_SERVER['SERVER_PORT'] != 443 ) ) ) {
-
- $wgServer .= ":" . $_SERVER['SERVER_PORT'];
-}
-/** @endcond */
+/**
+ * Canonical URL of the server, to use in IRC feeds and notification e-mails.
+ * Must be fully qualified, even if $wgServer is protocol-relative.
+ *
+ * Defaults to $wgServer, expanded to a fully qualified http:// URL if needed.
+ */
+$wgCanonicalServer = false;
/************************************************************************//**
* @name Script path settings
* Other paths will be set to defaults based on it unless they are directly
* set in LocalSettings.php
*/
-$wgScriptPath = '/wiki';
+$wgScriptPath = '/wiki';
/**
* Whether to support URLs like index.php/Page_title These often break when PHP
/**
* The URL path to index.php.
*
- * Defaults to "{$wgScriptPath}/index{$wgScriptExtension}".
+ * Will default to "{$wgScriptPath}/index{$wgScriptExtension}" in Setup.php
*/
$wgScript = false;
* The URL path to redirect.php. This is a script that is used by the Nostalgia
* skin.
*
- * Defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}".
+ * Will default to "{$wgScriptPath}/redirect{$wgScriptExtension}" in Setup.php
*/
-$wgRedirectScript = false; ///< defaults to
+$wgRedirectScript = false;
/**
* The URL path to load.php.
*/
$wgLoadScript = false;
+
/**@}*/
/************************************************************************//**
*
* These various web and file path variables are set to their defaults
* in Setup.php if they are not explicitly set from LocalSettings.php.
- * If you do override them, be sure to set them all!
*
* These will relatively rarely need to be set manually, unless you are
* splitting style sheets or images outside the main document root.
*/
/**
- * The URL path of the skins directory. Defaults to "{$wgScriptPath}/skins"
+ * The URL path of the skins directory. Will default to "{$wgScriptPath}/skins" in Setup.php
*/
$wgStylePath = false;
$wgStyleSheetPath = &$wgStylePath;
$wgExtensionAssetsPath = false;
/**
- * Filesystem stylesheets directory. Defaults to "{$IP}/skins"
+ * Filesystem stylesheets directory. Will default to "{$IP}/skins" in Setup.php
*/
$wgStyleDirectory = false;
* The URL path for primary article page views. This path should contain $1,
* which is replaced by the article title.
*
- * Defaults to "{$wgScript}/$1" or "{$wgScript}?title=$1", depending on
- * $wgUsePathInfo.
+ * Will default to "{$wgScript}/$1" or "{$wgScript}?title=$1" in Setup.php,
+ * depending on $wgUsePathInfo.
*/
$wgArticlePath = false;
/**
- * The URL path for the images directory. Defaults to "{$wgScriptPath}/images"
+ * The URL path for the images directory. Will default to "{$IP}/images" in Setup.php
*/
$wgUploadPath = false;
+/**
+ * The maximum age of temporary (incomplete) uploaded files
+ */
+$wgUploadStashMaxAge = 6 * 3600; // 6 hours
+
/**
* The filesystem path of the images directory. Defaults to "{$IP}/images".
*/
/**
* The URL path of the wiki logo. The logo size should be 135x135 pixels.
- * Defaults to "{$wgStylePath}/common/images/wiki.png".
+ * Will default to "{$wgStylePath}/common/images/wiki.png" in Setup.php
*/
$wgLogo = false;
* The local filesystem path to a temporary directory. This is not required to
* be web accessible.
*
- * Defaults to "{$wgUploadDirectory}/tmp".
+ * Will default to "{$wgUploadDirectory}/tmp" in Setup.php
*/
$wgTmpDirectory = false;
* - class The class name for the repository. May come from the core or an extension.
* The core repository classes are LocalRepo, ForeignDBRepo, FSRepo.
*
- * - name A unique name for the repository (but $wgLocalFileRepo should be 'local').
+ * - name A unique name for the repository (but $wgLocalFileRepo should be 'local').
*
* For most core repos:
* - url Base public URL
* Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php
*
* NOTE FOR WINDOWS USERS:
- * To enable EXIF functions, add the folloing lines to the
+ * To enable EXIF functions, add the following lines to the
* "Windows extensions" section of php.ini:
*
* extension=extensions/php_mbstring.dll
* for non-specified types.
*
* For example:
- * $wgMaxUploadSize = array(
- * '*' => 250 * 1024,
- * 'url' => 500 * 1024,
- * );
+ * $wgMaxUploadSize = array(
+ * '*' => 250 * 1024,
+ * 'url' => 500 * 1024,
+ * );
* Sets the maximum for all uploads to 250 kB except for upload-by-url, which
* will have a maximum of 500 kB.
*
*/
$wgStrictFileExtensions = true;
+/**
+ * Setting this to true will disable the upload system's checks for HTML/JavaScript.
+ * THIS IS VERY DANGEROUS on a publicly editable site, so USE wgGroupPermissions
+ * TO RESTRICT UPLOADING to only those that you trust
+ */
+$wgDisableUploadScriptChecks = false;
+
/** Warn if uploaded files are larger than this (in bytes), or false to disable*/
$wgUploadSizeWarning = false;
*/
$wgCustomConvertCommand = false;
+/**
+ * Some tests and extensions use exiv2 to manipulate the EXIF metadata in some image formats.
+ */
+$wgExiv2Command = '/usr/bin/exiv2';
+
/**
* Scalable Vector Graphics (SVG) may be uploaded as images.
* Since SVG support is not yet standard in browsers, it is
$wgAllowTitlesInSVG = false;
/**
- * Don't thumbnail an image if it will use too much working memory.
- * Default is 50 MB if decompressed to RGBA form, which corresponds to
- * 12.5 million pixels or 3500x3500
+ * The maximum number of pixels a source image can have if it is to be scaled
+ * down by a scaler that requires the full source image to be decompressed
+ * and stored in decompressed form, before the thumbnail is generated.
+ *
+ * This provides a limit on memory usage for the decompression side of the
+ * image scaler. The limit is used when scaling PNGs with any of the
+ * built-in image scalers, such as ImageMagick or GD. It is ignored for
+ * JPEGs with ImageMagick, and when using the VipsScaler extension.
+ *
+ * The default is 50 MB if decompressed to RGBA form, which corresponds to
+ * 12.5 million pixels or 3500x3500.
*/
$wgMaxImageArea = 1.25e7;
/**
/** Obsolete, always true, kept for compatibility with extensions */
$wgUseImageResize = true;
+/**
+ * If set to true, images that contain certain the exif orientation tag will
+ * be rotated accordingly. If set to null, try to auto-detect whether a scaler
+ * is available that can rotate.
+ */
+$wgEnableAutoRotation = null;
/**
* Internal name of virus scanner. This servers as a key to the
* array = ( 'rootElement' => 'associatedMimeType' )
*/
$wgXMLMimeTypes = array(
- 'http://www.w3.org/2000/svg:svg' => 'image/svg+xml',
- 'svg' => 'image/svg+xml',
- 'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram',
- 'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml?
- 'html' => 'text/html', // application/xhtml+xml?
- 'http://www.opengis.net/kml/2.1:kml' => 'application/vnd.google-earth.kml+xml',
- 'http://www.opengis.net/kml/2.2:kml' => 'application/vnd.google-earth.kml+xml',
- 'kml' => 'application/vnd.google-earth.kml+xml',
+ 'http://www.w3.org/2000/svg:svg' => 'image/svg+xml',
+ 'svg' => 'image/svg+xml',
+ 'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram',
+ 'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml?
+ 'html' => 'text/html', // application/xhtml+xml?
);
/**
* @{
*/
+$serverName = substr( $wgServer, strrpos( $wgServer, '/' ) + 1 );
+
/**
* Site admin email address.
*/
$wgDBtype = 'mysql';
/** Separate username for maintenance tasks. Leave as null to use the default. */
-$wgDBadminuser = null;
+$wgDBadminuser = null;
/** Separate password for maintenance tasks. Leave as null to use the default. */
$wgDBadminpassword = null;
* selected database type (eg SearchMySQL), or set to a class
* name to override to a custom search engine.
*/
-$wgSearchType = null;
+$wgSearchType = null;
/** Table name prefix */
$wgDBprefix = '';
*
* $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' );
*
+ * @var array
*/
$wgDefaultExternalStore = false;
$wgWantedPagesThreshold = 1;
/** Enable slow parser functions */
$wgAllowSlowParserFunctions = false;
+/** Allow schema updates */
+$wgAllowSchemaUpdates = true;
/**
* Do DELETE/INSERT for link updates instead of incremental
* 'session_mysql.' Setting to null skips setting this entirely (which might be
* useful if you're doing cross-application sessions, see bug 11381)
*/
-$wgSessionHandler = 'files';
+$wgSessionHandler = null;
/** If enabled, will send MemCached debugging information to $wgDebugLogFile */
$wgMemCachedDebug = false;
/**
* Directory where the cached page will be saved.
- * Defaults to "$wgCacheDirectory/html".
+ * Will default to "{$wgUploadDirectory}/cache" in Setup.php
*/
$wgFileCacheDirectory = false;
/** Send X-Vary-Options header for better caching (requires patched Squid) */
$wgUseXVO = false;
+/** Add X-Forwarded-Proto to the Vary and X-Vary-Options headers for API
+ * requests and RSS/Atom feeds. Use this if you have an SSL termination setup
+ * and need to split the cache between HTTP and HTTPS for API requests,
+ * feed requests and HTTP redirect responses in order to prevent cache
+ * pollution. This does not affect 'normal' requests to index.php other than
+ * HTTP redirects.
+ */
+$wgVaryOnXFP = false;
+
/**
* Internal server name as known to Squid, if different. Example:
* <code>
/**
* List of language codes that don't correspond to an actual language.
- * These codes are leftoffs from renames, or other legacy things.
- * Also, qqq is a dummy "language" for documenting messages.
+ * These codes are mostly leftoffs from renames, or other legacy things.
+ * This array makes them not appear as a selectable language on the installer,
+ * and excludes them when running the transstat.php script.
*/
$wgDummyLanguageCodes = array(
- 'als',
- 'bat-smg',
- 'be-x-old',
- 'dk',
- 'fiu-vro',
- 'iu',
- 'nb',
- 'qqq',
- 'roa-rup',
- 'simple',
+ 'als' => 'gsw',
+ 'bat-smg' => 'sgs',
+ 'be-x-old' => 'be-tarask',
+ 'bh' => 'bho',
+ 'fiu-vro' => 'vro',
+ 'nb' => 'no',
+ 'qqq' => 'qqq', # Used for message documentation.
+ 'qqx' => 'qqx', # Used for viewing message keys.
+ 'roa-rup' => 'rup',
+ 'simple' => 'en',
+ 'zh-classical' => 'lzh',
+ 'zh-min-nan' => 'nan',
+ 'zh-yue' => 'yue',
);
/**
*/
$wgAllowMicrodataAttributes = false;
+/**
+ * Cleanup as much presentational html like valign -> css vertical-align as we can
+ */
+$wgCleanupPresentationalAttributes = true;
+
/**
* Should we try to make our HTML output well-formed XML? If set to false,
* output will be a few bytes shorter, and the HTML will arguably be more
*/
$wgShowIPinHeader = true;
+/**
+ * Use a user's real name inside the user interface for display instead of the username
+ * (experimental)
+ */
+$wgRealNameInInterface = true;
+
/**
* Site notice shown at the top of each page
*
/** Use the site's Cascading Style Sheets (CSS)? */
$wgUseSiteCss = true;
-/**
- * Set to false to disable application of access keys and tooltips,
- * eg to avoid keyboard conflicts with system keys or as a low-level
- * optimization.
- */
-$wgEnableTooltipsAndAccesskeys = true;
-
/**
* Break out of framesets. This can be used to prevent clickjacking attacks,
* or to prevent external sites from framing your site with ads.
"poweredby" => array(
"mediawiki" => array(
"src" => null, // Defaults to "$wgStylePath/common/images/poweredby_mediawiki_88x31.png"
- "url" => "http://www.mediawiki.org/",
+ "url" => "//www.mediawiki.org/",
"alt" => "Powered by MediaWiki",
)
),
$wgEdititis = false;
/**
- * Experimental better directionality support.
+ * Better directionality support (bug 6100 and related).
+ * Removed in 1.18, still kept here for LiquidThreads backwards compatibility.
+ *
+ * @deprecated since 1.18
*/
-$wgBetterDirectionality = false;
+$wgBetterDirectionality = true;
/** @} */ # End of output format settings }
*/
$wgResourceModules = array();
+/**
+ * Extensions should register foreign module sources here. 'local' is a
+ * built-in source that is not in this array, but defined by
+ * ResourceLoader::__construct() so that it cannot be unset.
+ *
+ * Example:
+ * $wgResourceLoaderSources['foo'] = array(
+ * 'loadScript' => 'http://example.org/w/load.php',
+ * 'apiScript' => 'http://example.org/w/api.php'
+ * );
+ */
+$wgResourceLoaderSources = array();
+
+/**
+ * Default 'remoteBasePath' value for resource loader modules.
+ * If not set, then $wgScriptPath will be used as a fallback.
+ */
+$wgResourceBasePath = null;
+
/**
* Maximum time in seconds to cache resources served by the resource loader
*/
*/
$wgResourceLoaderMaxQueryLength = -1;
+/**
+ * If set to true, JavaScript modules loaded from wiki pages will be parsed prior
+ * to minification to validate it.
+ *
+ * Parse errors will result in a JS exception being thrown during module load,
+ * which avoids breaking other modules loaded in the same request.
+ */
+$wgResourceLoaderValidateJS = true;
+
+/**
+ * If set to true, statically-sourced (file-backed) JavaScript resources will
+ * be parsed for validity before being bundled up into ResourceLoader modules.
+ *
+ * This can be helpful for development by providing better error messages in
+ * default (non-debug) mode, but JavaScript parsing is slow and memory hungry
+ * and may fail on large pre-bundled frameworks.
+ */
+$wgResourceLoaderValidateStaticJS = false;
+
/** @} */ # End of resource loader settings }
* Custom namespaces should start at 100 to avoid conflicting with standard
* namespaces, and should always follow the even/odd main/talk pattern.
*/
-#$wgExtraNamespaces =
-# array(100 => "Hilfe",
-# 101 => "Hilfe_Diskussion",
-# 102 => "Aide",
-# 103 => "Discussion_Aide"
-# );
+# $wgExtraNamespaces = array(
+# 100 => "Hilfe",
+# 101 => "Hilfe_Diskussion",
+# 102 => "Aide",
+# 103 => "Discussion_Aide"
+# );
$wgExtraNamespaces = array();
+/**
+ * Same as above, but for namespaces with gender distinction.
+ * Note: the default form for the namespace should also be set
+ * using $wgExtraNamespaces for the same index.
+ * @since 1.18
+ */
+$wgExtraGenderNamespaces = array();
+
/**
* Namespace aliases
* These are alternate names for the primary localised namespace names, which
'svn://',
'git://',
'mms://',
+ '//', // for protocol-relative URLs
);
/**
* - $wgTidyBin should be set to the path of the binary and
* - $wgTidyConf to the path of the configuration file.
* - $wgTidyOpts can include any number of parameters.
- * - $wgTidyInternal controls the use of the PECL extension to use an in-
- * process tidy library instead of spawning a separate program.
+ * - $wgTidyInternal controls the use of the PECL extension or the
+ * libtidy (PHP >= 5) extension to use an in-process tidy library instead
+ * of spawning a separate program.
* Normally you shouldn't need to override the setting except for
* debugging. To install, use 'pear install tidy' and add a line
* 'extension=tidy.so' to php.ini.
$wgDebugTidy = false;
/** Allow raw, unchecked HTML in <html>...</html> sections.
- * THIS IS VERY DANGEROUS on a publically editable site, so USE wgGroupPermissions
+ * THIS IS VERY DANGEROUS on a publicly editable site, so USE wgGroupPermissions
* TO RESTRICT EDITING to only those that you trust
*/
$wgRawHtml = false;
$wgEnableScaryTranscluding = false;
/**
- * Expiry time for interwiki transclusion
+ * (see next option $wgGlobalDatabase).
*/
$wgTranscludeCacheExpiry = 3600;
/**
* Backward compatibility setting, will set $wgArticleCountMethod if it is null.
- * @deprecated since 1.19; use $wgArticleCountMethod instead
+ * @deprecated since 1.18; use $wgArticleCountMethod instead
*/
$wgUseCommaCount = false;
*/
$wgMinimalPasswordLength = 1;
-/**
- * Enabes or disables JavaScript-based suggestions of password strength
- */
-$wgLivePasswordStrengthChecks = false;
-
/**
* Whether to allow password resets ("enter some identifying data, and we'll send an email
* with a temporary password you can use to get back into the account") identified by
'numberheadings' => 0,
'previewonfirst' => 0,
'previewontop' => 1,
- 'quickbar' => 1,
+ 'quickbar' => 5,
'rcdays' => 7,
'rclimit' => 50,
'rememberpassword' => 0,
/**
* Permission keys given to users in each group.
+ * This is an array where the keys are all groups and each value is either:
+ * a) An array of the format (right => boolean)
+ * b) An array of the format (right => namespace => boolean)
+ *
+ * The second format is used to support per-namespace permissions.
+ * Note that this feature does not fully work for all permission types.
+ *
* All users are implicitly in the '*' group including anonymous visitors;
* logged-in users are all implicitly in the 'user' group. These will be
* combined with the permissions of all groups that a given user is listed
* Functionality to make pages inaccessible has not been extensively tested
* for security. Use at your own risk!
*
- * This replaces wgWhitelistAccount and wgWhitelistEdit
+ * This replaces $wgWhitelistAccount and $wgWhitelistEdit
*/
$wgGroupPermissions = array();
$wgGroupPermissions['user']['move'] = true;
$wgGroupPermissions['user']['move-subpages'] = true;
$wgGroupPermissions['user']['move-rootuserpages'] = true; // can move root userpages
-//$wgGroupPermissions['user']['movefile'] = true; // Disabled for now due to possible bugs and security concerns
+$wgGroupPermissions['user']['movefile'] = true;
$wgGroupPermissions['user']['read'] = true;
$wgGroupPermissions['user']['edit'] = true;
$wgGroupPermissions['user']['createpage'] = true;
/**
* Automatically add a usergroup to any user who matches certain conditions.
* The format is
- * array( '&' or '|' or '^', cond1, cond2, ... )
+ * array( '&' or '|' or '^' or '!', cond1, cond2, ... )
* where cond1, cond2, ... are themselves conditions; *OR*
* APCOND_EMAILCONFIRMED, *OR*
* array( APCOND_EMAILCONFIRMED ), *OR*
* array( APCOND_IPINRANGE, range ), *OR*
* array( APCOND_AGE_FROM_EDIT, seconds since first edit ), *OR*
* array( APCOND_BLOCKED ), *OR*
+ * array( APCOND_ISBOT ), *OR*
* similar constructs defined by extensions.
*
* If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any
),
);
+/**
+ * Automatically add a usergroup to any user who matches certain conditions.
+ * Does not add the user to the group again if it has been removed.
+ * Also, does not remove the group if the user no longer meets the criteria.
+ *
+ * The format is
+ * array( event => criteria, ... )
+ * where event is
+ * 'onEdit' (when user edits) or 'onView' (when user views the wiki)
+ * and criteria has the same format as $wgAutopromote
+ *
+ * @see $wgAutopromote
+ * @since 1.18
+ */
+$wgAutopromoteOnce = array(
+ 'onEdit' => array(),
+ 'onView' => array()
+);
+
+/**
+ * Put user rights log entries for autopromotion in recent changes?
+ * @since 1.18
+ */
+$wgAutopromoteOnceLogInRC = true;
+
/**
* $wgAddGroups and $wgRemoveGroups can be used to give finer control over who
* can assign which groups at Special:Userrights. Example configuration:
* - false : let it through
*
* @deprecated since 1.17 Use hooks. See SpamBlacklist extension.
+ * @var callback
*/
$wgFilterCallback = false;
$wgEnableSorbs = false;
/**
- * List of DNS blacklists to use, if $wgEnableDnsBlacklist is true
+ * List of DNS blacklists to use, if $wgEnableDnsBlacklist is true. This is an
+ * array of either a URL or an array with the URL and a key (should the blacklist
+ * require a key). For example:
+ * @code
+ * $wgDnsBlacklistUrls = array(
+ * // String containing URL
+ * 'http.dnsbl.sorbs.net',
+ * // Array with URL and key, for services that require a key
+ * array( 'dnsbl.httpbl.net', 'mykey' ),
+ * // Array with just the URL. While this works, it is recommended that you
+ * // just use a string as shown above
+ * array( 'opm.tornevall.org' )
+ * );
+ * @endcode
* @since 1.16
*/
$wgDnsBlacklistUrls = array( 'http.dnsbl.sorbs.net.' );
*/
$wgPutIPinRC = true;
+/**
+ * Integer defining default number of entries to show on
+ * special pages which are query-pages such as Special:Whatlinkshere.
+ */
+$wgQueryPageDefaultLimit = 50;
+
/**
* Limit password attempts to X attempts per Y seconds per IP per account.
* Requires memcached.
/**
* Default cookie expiration time. Setting to 0 makes all cookies session-only.
*/
-$wgCookieExpiration = 30*86400;
+$wgCookieExpiration = 180*86400;
/**
* Set to set an explicit domain on the login cookies eg, "justthis.domain.org"
/**
- * Set this variable if you want to restrict cookies to a certain path within
+ * Set this variable if you want to restrict cookies to a certain path within
* the domain specified by $wgCookieDomain.
*/
$wgCookiePath = '/';
$wgCookieSecure = 'detect';
/**
- * By default, MediaWiki checks if the client supports cookies during the
- * login process, so that it can display an informative error message if
+ * By default, MediaWiki checks if the client supports cookies during the
+ * login process, so that it can display an informative error message if
* cookies are disabled. Set this to true if you want to disable this cookie
* check.
*/
/**
* Prefix debug messages with relative timestamp. Very-poor man's profiler.
+ * Since 1.19 also includes memory usage.
*/
$wgDebugTimestamps = false;
*/
$wgDevelopmentWarnings = false;
+/**
+ * Release limitation to wfDeprecated warnings, if set to a release number
+ * development warnings will not be generated for deprecations added in releases
+ * after the limit.
+ */
+$wgDeprecationReleaseLimit = false;
+
/** Only record profiling info for pages that took longer than this */
$wgProfileLimit = 0.0;
*/
$wgParserTestRemote = false;
+
+/**
+ * Overwrite the caching key prefix with custom value. Do not set if using
+ * load balancer, since it depends on the key being in certain format.
+ * @since 1.19
+ */
+$wgWikiID = false;
+
/** @} */ # end of profiling, testing and debugging }
/************************************************************************//**
*/
$wgSitemapNamespaces = false;
+/**
+ * Custom namespace priorities for sitemaps. Setting this will allow you to
+ * set custom priorities to namsepaces when sitemaps are generated using the
+ * maintenance/generateSitemap.php script.
+ *
+ * This should be a map of namespace IDs to priority
+ * Example:
+ * $wgSitemapNamespacesPriorities = array(
+ * NS_USER => '0.9',
+ * NS_HELP => '0.0',
+ * );
+ */
+$wgSitemapNamespacesPriorities = false;
+
+/**
+ * If true, searches for IP addresses will be redirected to that IP's
+ * contributions page. E.g. searching for "1.2.3.4" will redirect to
+ * [[Special:Contributions/1.2.3.4]]
+ */
+$wgEnableSearchContributorsByIP = true;
+
/** @} */ # end of search settings
/************************************************************************//**
* Its contents will be shown to users as part of the read-only warning
* message.
*
- * Defaults to "{$wgUploadDirectory}/lock_yBgMBwiR".
+ * Will default to "{$wgUploadDirectory}/lock_yBgMBwiR" in Setup.php
*/
$wgReadOnlyFile = false;
*/
$wgOverrideSiteFeed = array();
+/**
+ * Available feeds objects
+ * Should probably only be defined when a page is syndicated ie when
+ * $wgOut->isSyndicated() is true
+ */
+$wgFeedClasses = array(
+ 'rss' => 'RSSFeed',
+ 'atom' => 'AtomFeed',
+);
+
/**
* Which feed types should we provide by default? This can include 'rss',
* 'atom', neither, or both.
$wgAdvertisedFeedTypes = array( 'atom' );
/** Show watching users in recent changes, watchlist and page history views */
-$wgRCShowWatchingUsers = false; # UPO
+$wgRCShowWatchingUsers = false; # UPO
/** Show watching users in Page views */
-$wgPageShowWatchingUsers = false;
+$wgPageShowWatchingUsers = false;
/** Show the amount of changed characters in recent changes */
$wgRCShowChangedSize = true;
/**
* Show "Updated (since my last visit)" marker in RC view, watchlist and history
* view for watched pages with new changes */
-$wgShowUpdatedMarker = true;
+$wgShowUpdatedMarker = true;
/**
* Disable links to talk pages of anonymous users (IPs) in listings on special
* @{
*/
-/** Override for copyright metadata.
- * TODO: these options need documentation
+/**
+ * Override for copyright metadata.
+ *
+ * This is the name of the page containing information about the wiki's copyright status,
+ * which will be added as a link in the footer if it is specified. It overrides
+ * $wgRightsUrl if both are specified.
*/
$wgRightsPage = null;
+
+/**
+ * Set this to specify an external URL containing details about the content license used on your wiki.
+ * If $wgRightsPage is set then this setting is ignored.
+ */
$wgRightsUrl = null;
+
+/**
+ * If either $wgRightsUrl or $wgRightsPage is specified then this variable gives the text for the link.
+ * If using $wgRightsUrl then this value must be specified. If using $wgRightsPage then the name of the
+ * page will also be used as the link if this variable is not set.
+ */
$wgRightsText = null;
+
+/**
+ * Override for copyright metadata.
+ */
$wgRightsIcon = null;
/**
*
* <code>
* $wgExtensionCredits[$type][] = array(
- * 'name' => 'Example extension',
- * 'version' => 1.9,
- * 'path' => __FILE__,
- * 'author' => 'Foo Barstein',
- * 'url' => 'http://wwww.example.com/Example%20Extension/',
- * 'description' => 'An example extension',
- * 'descriptionmsg' => 'exampleextension-desc',
+ * 'name' => 'Example extension',
+ * 'version' => 1.9,
+ * 'path' => __FILE__,
+ * 'author' => 'Foo Barstein',
+ * 'url' => 'http://wwww.example.com/Example%20Extension/',
+ * 'description' => 'An example extension',
+ * 'descriptionmsg' => 'exampleextension-desc',
* );
* </code>
*
/**
* Authentication plugin.
- * @var AuthPlugin
+ * @var $wgAuth AuthPlugin
*/
$wgAuth = null;
'uploadFromUrl' => 'UploadFromUrlJob',
);
-/**
- * Extensions of "thumbnails" that are very expensive to regenerate and should be
- * excluded from normal action=purge thumbnail removal.
- */
-$wgExcludeFromThumbnailPurge = array();
-
/**
* Jobs that must be explicitly requested, i.e. aren't run by job runners unless special flags are set.
*
* - uppercase: Converts the category name to upper case, and sorts by that.
*
+ * - identity: Does no conversion. Sorts by binary value of the string.
+ *
* - uca-default: Provides access to the Unicode Collation Algorithm with
* the default element table. This is a compromise collation which sorts
* all languages in a mediocre way. However, it is better than "uppercase".
*
* After you change this, you must run maintenance/updateCollation.php to fix
* the sort keys in the database.
+ *
+ * Extensions can define there own collations by subclassing Collation
+ * and using the Collation::factory hook.
*/
$wgCategoryCollation = 'uppercase';
* an action, which is a specific kind of event that can exist in that
* log type.
*/
-$wgLogTypes = array( '',
+$wgLogTypes = array(
+ '',
'block',
'protect',
'rights',
* will be listed in the user interface.
*
* Extensions with custom log types may add to this array.
+ *
+ * Since 1.19, if you follow the naming convention log-name-TYPE,
+ * where TYPE is your log type, yoy don't need to use this array.
*/
$wgLogNames = array(
'' => 'all-logs-page',
* top of each log type.
*
* Extensions with custom log types may add to this array.
+ *
+ * Since 1.19, if you follow the naming convention log-description-TYPE,
+ * where TYPE is your log type, yoy don't need to use this array.
*/
$wgLogHeaders = array(
'' => 'alllogstext',
* Extensions with custom log types may add to this array.
*/
$wgLogActions = array(
- 'block/block' => 'blocklogentry',
- 'block/unblock' => 'unblocklogentry',
- 'block/reblock' => 'reblock-logentry',
- 'protect/protect' => 'protectedarticle',
- 'protect/modify' => 'modifiedarticleprotection',
- 'protect/unprotect' => 'unprotectedarticle',
- 'protect/move_prot' => 'movedarticleprotection',
- 'rights/rights' => 'rightslogentry',
- 'rights/disable' => 'disableaccount-logentry',
- 'delete/delete' => 'deletedarticle',
- 'delete/restore' => 'undeletedarticle',
- 'delete/revision' => 'revdelete-logentry',
- 'delete/event' => 'logdelete-logentry',
- 'upload/upload' => 'uploadedimage',
- 'upload/overwrite' => 'overwroteimage',
- 'upload/revert' => 'uploadedimage',
- 'move/move' => '1movedto2',
- 'move/move_redir' => '1movedto2_redir',
- 'import/upload' => 'import-logentry-upload',
- 'import/interwiki' => 'import-logentry-interwiki',
- 'merge/merge' => 'pagemerge-logentry',
- 'suppress/revision' => 'revdelete-logentry',
- 'suppress/file' => 'revdelete-logentry',
- 'suppress/event' => 'logdelete-logentry',
- 'suppress/delete' => 'suppressedarticle',
- 'suppress/block' => 'blocklogentry',
- 'suppress/reblock' => 'reblock-logentry',
- 'patrol/patrol' => 'patrol-log-line',
+ 'block/block' => 'blocklogentry',
+ 'block/unblock' => 'unblocklogentry',
+ 'block/reblock' => 'reblock-logentry',
+ 'protect/protect' => 'protectedarticle',
+ 'protect/modify' => 'modifiedarticleprotection',
+ 'protect/unprotect' => 'unprotectedarticle',
+ 'protect/move_prot' => 'movedarticleprotection',
+ 'rights/rights' => 'rightslogentry',
+ 'rights/autopromote' => 'rightslogentry-autopromote',
+ 'upload/upload' => 'uploadedimage',
+ 'upload/overwrite' => 'overwroteimage',
+ 'upload/revert' => 'uploadedimage',
+ 'import/upload' => 'import-logentry-upload',
+ 'import/interwiki' => 'import-logentry-interwiki',
+ 'merge/merge' => 'pagemerge-logentry',
+ 'suppress/block' => 'blocklogentry',
+ 'suppress/reblock' => 'reblock-logentry',
);
/**
* The same as above, but here values are names of functions,
* not messages.
* @see LogPage::actionText
- */
-$wgLogActionsHandlers = array();
+ * @see LogFormatter
+ */
+$wgLogActionsHandlers = array(
+ // move, move_redir
+ 'move/*' => 'MoveLogFormatter',
+ // delete, restore, revision, event
+ 'delete/*' => 'DeleteLogFormatter',
+ 'suppress/revision' => 'DeleteLogFormatter',
+ 'suppress/event' => 'DeleteLogFormatter',
+ 'suppress/delete' => 'DeleteLogFormatter',
+ 'patrol/patrol' => 'PatrolLogFormatter',
+);
/**
* Maintain a log of newusers at Log/newusers?
'Block' => 'users',
'Unblock' => 'users',
'Preferences' => 'users',
+ 'ChangeEmail' => 'users',
'ChangePassword' => 'users',
'DeletedContributions' => 'users',
+ 'PasswordReset' => 'users',
'Mostlinked' => 'highuse',
'Mostlinkedcategories' => 'highuse',
* Array of allowed values for the title=foo&action=<action> parameter. Syntax is:
* 'foo' => 'ClassName' Load the specified class which subclasses Action
* 'foo' => true Load the class FooAction which subclasses Action
+ * If something is specified in the getActionOverrides()
+ * of the relevant Page object it will be used
+ * instead of the default class.
* 'foo' => false The action is disabled; show an error message
* Unsetting core actions will probably cause things to complain loudly.
*/
$wgActions = array(
'credits' => true,
'deletetrackback' => true,
+ 'history' => true,
+ 'info' => true,
'markpatrolled' => true,
'purge' => true,
+ 'raw' => true,
+ 'revert' => true,
'revisiondelete' => true,
+ 'rollback' => true,
'unwatch' => true,
'watch' => true,
);
*/
/**
- * The build directory for HipHop compilation.
+ * The build directory for HipHop compilation.
* Defaults to $IP/maintenance/hiphop/build.
*/
$wgHipHopBuildDirectory = false;
/**
* Filesystem extensions directory. Defaults to $IP/../extensions.
*
- * To compile extensions with HipHop, set $wgExtensionsDirectory correctly,
+ * To compile extensions with HipHop, set $wgExtensionsDirectory correctly,
* and use code like:
- *
+ *
* require( MWInit::extensionSetupPath( 'Extension/Extension.php' ) );
*
- * to include the extension setup file from LocalSettings.php. It is not
+ * to include the extension setup file from LocalSettings.php. It is not
* necessary to set this variable unless you use MWInit::extensionSetupPath().
*/
$wgExtensionsDirectory = false;
/**
- * A list of files that should be compiled into a HipHop build, in addition to
- * those listed in $wgAutoloadClasses. Add to this array in an extension setup
- * file in order to add files to the build.
+ * A list of files that should be compiled into a HipHop build, in addition to
+ * those listed in $wgAutoloadClasses. Add to this array in an extension setup
+ * file in order to add files to the build.
*
- * The files listed here must either be either absolute paths under $IP or
+ * The files listed here must either be either absolute paths under $IP or
* under $wgExtensionsDirectory, or paths relative to the virtual source root
- * "$IP/..", i.e. starting with "phase3" for core files, and "extensions" for
+ * "$IP/..", i.e. starting with "phase3" for core files, and "extensions" for
* extension files.
*/
$wgCompiledFiles = array();
dépôts / lhc / web / wiklou.git / blobdiff