* http://www.mediawiki.org/wiki/Manual:Configuration_settings
*/
-/**
+/**
* @cond file_level_code
* This is not a valid entry point, perform no further processing unless MEDIAWIKI is defined
*/
die( 1 );
}
-
# Create a site configuration object. Not used for much in a default install
if ( !defined( 'MW_PHP4' ) ) {
require_once( "$IP/includes/SiteConfiguration.php" );
/** @endcond */
/** MediaWiki version number */
-$wgVersion = '1.17alpha';
+$wgVersion = '1.18alpha';
/** Name of the site. It must be changed in LocalSettings.php */
$wgSitename = 'MediaWiki';
-/**
- * URL of the server. It will be automatically built including https mode.
+/**
+ * URL of the server. It will be automatically built including https mode.
*
* Example:
* <code>
* $wgServer = http://example.com
* </code>
*
- * This is usually detected correctly by MediaWiki. If MediaWiki detects the
- * wrong server, it will redirect incorrectly after you save a page. In that
+ * This is usually detected correctly by MediaWiki. If MediaWiki detects the
+ * wrong server, it will redirect incorrectly after you save a page. In that
* case, set this variable to fix it.
*/
$wgServer = '';
/** @cond file_level_code */
if( isset( $_SERVER['SERVER_NAME'] ) ) {
- $wgServerName = $_SERVER['SERVER_NAME'];
+ $serverName = $_SERVER['SERVER_NAME'];
} elseif( isset( $_SERVER['HOSTNAME'] ) ) {
- $wgServerName = $_SERVER['HOSTNAME'];
+ $serverName = $_SERVER['HOSTNAME'];
} elseif( isset( $_SERVER['HTTP_HOST'] ) ) {
- $wgServerName = $_SERVER['HTTP_HOST'];
+ $serverName = $_SERVER['HTTP_HOST'];
} elseif( isset( $_SERVER['SERVER_ADDR'] ) ) {
- $wgServerName = $_SERVER['SERVER_ADDR'];
+ $serverName = $_SERVER['SERVER_ADDR'];
} else {
- $wgServerName = 'localhost';
+ $serverName = 'localhost';
}
$wgProto = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] == 'on') ? 'https' : 'http';
-$wgServer = $wgProto.'://' . $wgServerName;
+$wgServer = $wgProto.'://' . $serverName;
# If the port is a non-standard one, add it to the URL
if( isset( $_SERVER['SERVER_PORT'] )
- && !strpos( $wgServerName, ':' )
- && ( ( $wgProto == 'http' && $_SERVER['SERVER_PORT'] != 80 )
+ && !strpos( $serverName, ':' )
+ && ( ( $wgProto == 'http' && $_SERVER['SERVER_PORT'] != 80 )
|| ( $wgProto == 'https' && $_SERVER['SERVER_PORT'] != 443 ) ) ) {
$wgServer .= ":" . $_SERVER['SERVER_PORT'];
( strpos( php_sapi_name(), 'isapi' ) === false );
/**
- * The extension to append to script names by default. This can either be .php
+ * The extension to append to script names by default. This can either be .php
* or .php5.
*
- * Some hosting providers use PHP 4 for *.php files, and PHP 5 for *.php5. This
+ * Some hosting providers use PHP 4 for *.php files, and PHP 5 for *.php5. This
* variable is provided to support those providers.
*/
$wgScriptExtension = '.php';
$wgScript = false;
/**
- * The URL path to redirect.php. This is a script that is used by the Nostalgia
+ * The URL path to redirect.php. This is a script that is used by the Nostalgia
* skin.
*
* Defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}".
*/
-$wgRedirectScript = false; ///< defaults to
-/**@}*/
+$wgRedirectScript = false; ///< defaults to
+
+/**
+ * The URL path to load.php.
+ *
+ * Defaults to "{$wgScriptPath}/load{$wgScriptExtension}".
+ */
+$wgLoadScript = false;
+/**@}*/
/************************************************************************//**
* @name URLs and file paths
* These will relatively rarely need to be set manually, unless you are
* splitting style sheets or images outside the main document root.
*
- * In this section, a "path" is usually a host-relative URL, i.e. a URL without
- * the host part, that starts with a slash. In most cases a full URL is also
+ * In this section, a "path" is usually a host-relative URL, i.e. a URL without
+ * the host part, that starts with a slash. In most cases a full URL is also
* acceptable. A "directory" is a local file path.
*
* In both paths and directories, trailing slashes should not be included.
$wgStyleSheetPath = &$wgStylePath;
/**
- * The URL path of the skins directory. Should not point to an external domain.
+ * The URL path of the skins directory. Should not point to an external domain.
* Defaults to "{$wgScriptPath}/skins".
*/
$wgLocalStylePath = false;
/**
- * The URL path of the extensions directory.
+ * The URL path of the extensions directory.
* Defaults to "{$wgScriptPath}/extensions".
*/
$wgExtensionAssetsPath = false;
$wgStyleDirectory = false;
/**
- * The URL path for primary article page views. This path should contain $1,
- * which is replaced by the article title.
+ * The URL path for primary article page views. This path should contain $1,
+ * which is replaced by the article title.
*
- * Defaults to "{$wgScript}/$1" or "{$wgScript}?title=$1", depending on
+ * Defaults to "{$wgScript}/$1" or "{$wgScript}?title=$1", depending on
* $wgUsePathInfo.
*/
$wgArticlePath = false;
/**
* The URL path of the math directory. Defaults to "{$wgUploadPath}/math".
*
- * See http://www.mediawiki.org/wiki/Manual:Enable_TeX for details about how to
+ * See http://www.mediawiki.org/wiki/Manual:Enable_TeX for details about how to
* set up mathematical formula display.
*/
$wgMathPath = false;
/**
- * The filesystem path of the math directory.
+ * The filesystem path of the math directory.
* Defaults to "{$wgUploadDirectory}/math".
*
- * See http://www.mediawiki.org/wiki/Manual:Enable_TeX for details about how to
+ * See http://www.mediawiki.org/wiki/Manual:Enable_TeX for details about how to
* set up mathematical formula display.
*/
$wgMathDirectory = false;
/**
- * The local filesystem path to a temporary directory. This is not required to
- * be web accessible.
+ * The local filesystem path to a temporary directory. This is not required to
+ * be web accessible.
*
* Defaults to "{$wgUploadDirectory}/tmp".
*/
$wgTmpDirectory = false;
/**
- * If set, this URL is added to the start of $wgUploadPath to form a complete
- * upload URL.
+ * If set, this URL is added to the start of $wgUploadPath to form a complete
+ * upload URL.
*/
$wgUploadBaseUrl = "";
+/**
+ * To enable remote on-demand scaling, set this to the thumbnail base URL.
+ * Full thumbnail URL will be like $wgUploadStashScalerBaseUrl/e/e6/Foo.jpg/123px-Foo.jpg
+ * where 'e6' are the first two characters of the MD5 hash of the file name.
+ * If $wgUploadStashScalerBaseUrl is set to false, thumbs are rendered locally as needed.
+ */
+$wgUploadStashScalerBaseUrl = false;
+
/**
* To set 'pretty' URL paths for actions other than
* plain page views, add to this array. For instance:
$wgImgAuthDetails = false;
/**
- * If this is enabled, img_auth.php will not allow image access unless the wiki
- * is private. This improves security when image uploads are hosted on a
+ * If this is enabled, img_auth.php will not allow image access unless the wiki
+ * is private. This improves security when image uploads are hosted on a
* separate domain.
*/
$wgImgAuthPublicTest = true;
* - descBaseUrl URL of image description pages, e.g. http://en.wikipedia.org/wiki/File:
* - scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g.
* http://en.wikipedia.org/w
- * - scriptExtension Script extension of the MediaWiki installation, equivalent to
+ * - scriptExtension Script extension of the MediaWiki installation, equivalent to
* $wgScriptExtension, e.g. .php5 defaults to .php
*
* - articleUrl Equivalent to $wgArticlePath, e.g. http://en.wikipedia.org/wiki/$1
*/
$wgShowEXIF = function_exists( 'exif_read_data' );
-/**
- * Set to true to enable the upload _link_ while local uploads are disabled.
- * Assumes that the special page link will be bounced to another server where
- * uploads do work.
- */
-$wgRemoteUploads = false;
-
/**
* If you operate multiple wikis, you can define a shared upload path here.
* Uploads to this wiki will NOT be put there - they will be put into
* The timeout for copy uploads is set by $wgHTTPTimeout.
*/
$wgAllowCopyUploads = false;
+/**
+ * Allow asynchronous copy uploads.
+ * This feature is experimental.
+ */
+$wgAllowAsyncCopyUploads = false;
/**
* Max size for uploads, in bytes. Applies to all uploads.
* Useful if you want to use a shared repository by default
* without disabling local uploads (use $wgEnableUploads = false for that)
* e.g. $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
- *
- * This also affects images inline images that do not exist. In that case the URL will get
- * (?|&)wpDestFile=<filename> appended to it as appropriate.
*/
$wgUploadNavigationUrl = false;
+/**
+ * Point the upload link for missing files to an external URL, as with
+ * $wgUploadNavigationUrl. The URL will get (?|&)wpDestFile=<filename>
+ * appended to it as appropriate.
+ */
+$wgUploadMissingFileUrl = false;
+
/**
* Give a path here to use thumb.php for thumbnail generation on client request, instead of
* generating them on render and outputting a static URL. This is necessary if some of your
$wgSharedThumbnailScriptPath = false;
/**
- * Set this to false if you do not want MediaWiki to divide your images
+ * Set this to false if you do not want MediaWiki to divide your images
* directory into many subdirectories, for improved performance.
*
- * It's almost always good to leave this enabled. In previous versions of
- * MediaWiki, some users set this to false to allow images to be added to the
- * wiki by simply copying them into $wgUploadDirectory and then running
- * maintenance/rebuildImages.php to register them in the database. This is no
+ * It's almost always good to leave this enabled. In previous versions of
+ * MediaWiki, some users set this to false to allow images to be added to the
+ * wiki by simply copying them into $wgUploadDirectory and then running
+ * maintenance/rebuildImages.php to register them in the database. This is no
* longer recommended, use maintenance/importImages.php instead.
*
* Note that this variable may be ignored if $wgLocalFileRepo is set.
/**
* This is the list of preferred extensions for uploading files. Uploading files
* with extensions not in this list will trigger a warning.
+ *
+ * WARNING: If you add any OpenOffice or Microsoft Office file formats here,
+ * such as odt or doc, and untrusted users are allowed to upload files, then
+ * your wiki will be vulnerable to cross-site request forgery (CSRF).
*/
$wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg' );
# May contain harmful executables for Windows victims
'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' );
-/**
+/**
* Files with these mime types will never be allowed as uploads
* if $wgVerifyMimeType is enabled.
*/
'application/x-opc+zip',
);
-/** This is a flag to determine whether or not to check file extensions on upload. */
+/**
+ * This is a flag to determine whether or not to check file extensions on upload.
+ *
+ * WARNING: setting this to false is insecure for public wikis.
+ */
$wgCheckFileExtensions = true;
/**
* If this is turned off, users may override the warning for files not covered
* by $wgFileExtensions.
+ *
+ * WARNING: setting this to false is insecure for public wikis.
*/
$wgStrictFileExtensions = true;
$wgUseImageResize = true;
-/**
- * Internal name of virus scanner. This servers as a key to the
- * $wgAntivirusSetup array. Set this to NULL to disable virus scanning. If not
+/**
+ * Internal name of virus scanner. This servers as a key to the
+ * $wgAntivirusSetup array. Set this to NULL to disable virus scanning. If not
* null, every file uploaded will be scanned for viruses.
*/
$wgAntivirus= null;
-/**
- * Configuration for different virus scanners. This an associative array of
- * associative arrays. It contains one setup array per known scanner type.
+/**
+ * Configuration for different virus scanners. This an associative array of
+ * associative arrays. It contains one setup array per known scanner type.
* The entry is selected by $wgAntivirus, i.e.
* valid values for $wgAntivirus are the keys defined in this array.
*
- * The configuration array for each scanner contains the following keys:
+ * The configuration array for each scanner contains the following keys:
* "command", "codemap", "messagepattern":
*
- * "command" is the full command to call the virus scanner - %f will be
- * replaced with the name of the file to scan. If not present, the filename
- * will be appended to the command. Note that this must be overwritten if the
+ * "command" is the full command to call the virus scanner - %f will be
+ * replaced with the name of the file to scan. If not present, the filename
+ * will be appended to the command. Note that this must be overwritten if the
* scanner is not in the system path; in that case, plase set
- * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full
+ * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full
* path.
*
- * "codemap" is a mapping of exit code to return codes of the detectVirus
+ * "codemap" is a mapping of exit code to return codes of the detectVirus
* function in SpecialUpload.
- * - An exit code mapped to AV_SCAN_FAILED causes the function to consider
- * the scan to be failed. This will pass the file if $wgAntivirusRequired
+ * - An exit code mapped to AV_SCAN_FAILED causes the function to consider
+ * the scan to be failed. This will pass the file if $wgAntivirusRequired
* is not set.
- * - An exit code mapped to AV_SCAN_ABORTED causes the function to consider
- * the file to have an usupported format, which is probably imune to
+ * - An exit code mapped to AV_SCAN_ABORTED causes the function to consider
+ * the file to have an usupported format, which is probably imune to
* virusses. This causes the file to pass.
- * - An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning
+ * - An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning
* no virus was found.
- * - All other codes (like AV_VIRUS_FOUND) will cause the function to report
+ * - All other codes (like AV_VIRUS_FOUND) will cause the function to report
* a virus.
* - You may use "*" as a key in the array to catch all exit codes not mapped otherwise.
*
$wgMimeInfoFile= "includes/mime.info";
#$wgMimeInfoFile= null; #use built-in defaults only.
-/**
+/**
* Switch for loading the FileInfo extension by PECL at runtime.
* This should be used only if fileinfo is installed as a shared object
* or a dynamic library.
*/
$wgMimeDetectorCommand = null;
-/**
+/**
* Switch for trivial mime detection. Used by thumb.php to disable all fancy
* things, because only a few types of images are needed and file extensions
* can be trusted.
* Default parameters for the <gallery> tag
*/
$wgGalleryOptions = array (
- 'imagesPerRow' => 4, // Default number of images per-row in the gallery
+ 'imagesPerRow' => 0, // Default number of images per-row in the gallery. 0 -> Adapt to screensize
'imageWidth' => 120, // Width of the cells containing images in galleries (in "px")
'imageHeight' => 120, // Height of the cells containing images in galleries (in "px")
'captionLength' => 20, // Length of caption to truncate (in characters)
/**
* Site admin email address.
*/
-$wgEmergencyContact = 'wikiadmin@' . $wgServerName;
+$wgEmergencyContact = 'wikiadmin@' . $serverName;
/**
* Password reminder email address.
*
* The address we should use as sender when a user is requesting his password.
*/
-$wgPasswordSender = 'MediaWiki Mail <apache@' . $wgServerName . '>';
+$wgPasswordSender = 'apache@' . $serverName;
+
+unset( $serverName ); # Don't leak local variables to global scope
+
+/**
+ * Password reminder name
+ */
+$wgPasswordSenderName = 'MediaWiki Mail';
/**
* Dummy address which should be accepted during mail send action.
* It might be necessary to adapt the address or to set it equal
* to the $wgEmergencyContact address.
*/
-$wgNoReplyAddress = 'reply@not.possible';
+$wgNoReplyAddress = 'reply@not.possible';
/**
* Set to true to enable the e-mail basic features:
*/
$wgSMTP = false;
-/** For email notification on page changes */
-$wgPasswordSender = $wgEmergencyContact;
+/**
+ * Additional email parameters, will be passed as the last argument to mail() call.
+ * If using safe_mode this has no effect
+ */
+$wgAdditionalMailParams = null;
/**
- * True: from page editor if s/he opted-in. False: Enotif mails appear to come
+ * True: from page editor if s/he opted-in. False: Enotif mails appear to come
* from $wgEmergencyContact
*/
$wgEnotifFromEditor = false;
/**
* Require email authentication before sending mail to an email addres. This is
- * highly recommended. It prevents MediaWiki from being used as an open spam
+ * highly recommended. It prevents MediaWiki from being used as an open spam
* relay.
*/
$wgEmailAuthentication = true;
$wgEnotifUserTalk = false;
/**
- * Set the Reply-to address in notifications to the editor's address, if user
+ * Set the Reply-to address in notifications to the editor's address, if user
* allowed this in the preferences.
*/
$wgEnotifRevealEditorAddress = false;
/**
- * Send notification mails on minor edits to watchlist pages. This is enabled
+ * Send notification mails on minor edits to watchlist pages. This is enabled
* by default. Does not affect user talk notifications.
*/
$wgEnotifMinorEdits = true;
$wgEnotifMaxRecips = 500;
/**
- * Send mails via the job queue. This can be useful to reduce the time it
+ * Send mails via the job queue. This can be useful to reduce the time it
* takes to save a page that a lot of people are watching.
*/
$wgEnotifUseJobQ = false;
$wgEnotifUseRealName = false;
/**
- * Array of usernames who will be sent a notification email for every change
+ * Array of usernames who will be sent a notification email for every change
* which occurs on a wiki.
*/
$wgUsersNotifiedOnAllChanges = array();
/** Separate password for maintenance tasks. Leave as null to use the default. */
$wgDBadminpassword = null;
-/**
+/**
* Search type.
* Leave as null to select the default search engine for the
* selected database type (eg SearchMySQL), or set to a class
/**
* SQL Mode - default is turning off all modes, including strict, if set.
- * null can be used to skip the setting for performance reasons and assume
+ * null can be used to skip the setting for performance reasons and assume
* DBA has done his best job.
* String override can be used for some additional fun :-)
*/
-$wgSQLMode = '';
+$wgSQLMode = '';
/** Mediawiki schema */
$wgDBmwschema = 'mediawiki';
* MediaWiki's tables may have side effects if you try to share them.
* EXPERIMENTAL
*
- * $wgSharedPrefix is the table prefix for the shared database. It defaults to
+ * $wgSharedPrefix is the table prefix for the shared database. It defaults to
* $wgDBprefix.
*/
$wgSharedDB = null;
$wgMaxArticleSize = 2048;
/**
- * The minimum amount of memory that MediaWiki "needs"; MediaWiki will try to
+ * The minimum amount of memory that MediaWiki "needs"; MediaWiki will try to
* raise PHP's memory limit if it's below this amount.
*/
$wgMemoryLimit = "50M";
$wgCacheDirectory = false;
/**
- * Main cache type. This should be a cache with fast access, but it may have
- * limited space. By default, it is disabled, since the database is not fast
+ * Main cache type. This should be a cache with fast access, but it may have
+ * limited space. By default, it is disabled, since the database is not fast
* enough to make it worthwhile.
*
* The options are:
* - CACHE_ANYTHING: Use anything, as long as it works
* - CACHE_NONE: Do not cache
* - CACHE_DB: Store cache objects in the DB
- * - CACHE_MEMCACHED: MemCached, must specify servers in $wgMemCacheServers
+ * - CACHE_MEMCACHED: MemCached, must specify servers in $wgMemCachedServers
* - CACHE_ACCEL: eAccelerator, APC, XCache or WinCache
- * - CACHE_DBA: Use PHP's DBA extension to store in a DBM-style
- * database. This is slow, and is not recommended for
+ * - CACHE_DBA: Use PHP's DBA extension to store in a DBM-style
+ * database. This is slow, and is not recommended for
* anything other than debugging.
*
* @see $wgMessageCacheType, $wgParserCacheType
$wgMainCacheType = CACHE_NONE;
/**
- * The cache type for storing the contents of the MediaWiki namespace. This
+ * The cache type for storing the contents of the MediaWiki namespace. This
* cache is used for a small amount of data which is expensive to regenerate.
*
* For available types see $wgMainCacheType.
$wgMessageCacheType = CACHE_ANYTHING;
/**
- * The cache type for storing article HTML. This is used to store data which
+ * The cache type for storing article HTML. This is used to store data which
* is expensive to regenerate, and benefits from having plenty of storage space.
*
* For available types see $wgMainCacheType.
$wgParserCacheType = CACHE_ANYTHING;
/**
- * The expiry time for the parser cache, in seconds. The default is 86.4k
+ * The expiry time for the parser cache, in seconds. The default is 86.4k
* seconds, otherwise known as a day.
*/
$wgParserCacheExpireTime = 86400;
$wgDBAhandler = 'db3';
/**
- * Store sessions in MemCached. This can be useful to improve performance, or to
- * avoid the locking behaviour of PHP's default session handler, which tends to
+ * Store sessions in MemCached. This can be useful to improve performance, or to
+ * avoid the locking behaviour of PHP's default session handler, which tends to
* prevent multiple requests for the same user from acting concurrently.
*/
$wgSessionsInMemcached = false;
-/**
+/**
* This is used for setting php's session.save_handler. In practice, you will
* almost never need to change this ever. Other options might be 'user' or
* 'session_mysql.' Setting to null skips setting this entirely (which might be
- * useful if you're doing cross-application sessions, see bug 11381)
+ * useful if you're doing cross-application sessions, see bug 11381)
*/
$wgSessionHandler = 'files';
-/** @deprecated Does nothing */
-$wgUseMemCached = false;
-
/** If enabled, will send MemCached debugging information to $wgDebugLogFile */
$wgMemCachedDebug = false;
/** The list of MemCached servers and port numbers */
$wgMemCachedServers = array( '127.0.0.1:11000' );
-/**
- * Use persistent connections to MemCached, which are shared across multiple
+/**
+ * Use persistent connections to MemCached, which are shared across multiple
* requests.
*/
$wgMemCachedPersistent = false;
*/
$wgLocalMessageCacheSerialized = true;
+/**
+ * Instead of caching everything, keep track which messages are requested and
+ * load only most used messages. This only makes sense if there is lots of
+ * interface messages customised in the wiki (like hundreds in many languages).
+ */
+$wgAdaptiveMessageCache = false;
+
/**
* Localisation cache configuration. Associative array with keys:
* class: The class to use. May be overridden by extensions.
* to ensure that client-side caches do not keep obsolete copies of global
* styles.
*/
-$wgStyleVersion = '299';
+$wgStyleVersion = '301';
/**
* This will cache static pages for non-logged-in users to reduce
*/
$wgUseFileCache = false;
-/**
- * Directory where the cached page will be saved.
+/**
+ * Directory where the cached page will be saved.
* Defaults to "$wgCacheDirectory/html".
*/
$wgFileCacheDirectory = false;
+/**
+ * Depth of the subdirectory hierarchy to be created under
+ * $wgFileCacheDirectory. The subdirectories will be named based on
+ * the MD5 hash of the title. A value of 0 means all cache files will
+ * be put directly into the main file cache directory.
+ */
+$wgFileCacheDepth = 2;
+
/**
* Keep parsed pages in a cache (objectcache table or memcached)
* to speed up output of the same page viewed by another user with the
*/
$wgUseGzip = false;
-/** Whether MediaWiki should send an ETag header */
+/**
+ * Whether MediaWiki should send an ETag header. Seems to cause
+ * broken behavior with Squid 2.6, see bug 7098.
+ */
$wgUseETag = false;
/** Clock skew or the one-second resolution of time() can occasionally cause cache
*/
$wgClockSkewFudge = 5;
+/**
+ * Invalidate various caches when LocalSettings.php changes. This is equivalent
+ * to setting $wgCacheEpoch to the modification time of LocalSettings.php, as
+ * was previously done in the default LocalSettings.php file.
+ *
+ * On high-traffic wikis, this should be set to false, to avoid the need to
+ * check the file modification time, and to avoid the performance impact of
+ * unnecessary cache invalidations.
+ */
+$wgInvalidateCacheOnLocalSettingsChange = true;
+
/** @} */ # end of cache settings
/************************************************************************//**
* @name HTTP proxy (Squid) settings
*
- * Many of these settings apply to any HTTP proxy used in front of MediaWiki,
+ * Many of these settings apply to any HTTP proxy used in front of MediaWiki,
* although they are referred to as Squid settings for historical reasons.
*
- * Achieving a high hit ratio with an HTTP proxy requires special
- * configuration. See http://www.mediawiki.org/wiki/Manual:Squid_caching for
+ * Achieving a high hit ratio with an HTTP proxy requires special
+ * configuration. See http://www.mediawiki.org/wiki/Manual:Squid_caching for
* more details.
*
* @{
*/
-/**
+/**
* Enable/disable Squid.
* See http://www.mediawiki.org/wiki/Manual:Squid_caching
*/
/** Send X-Vary-Options header for better caching (requires patched Squid) */
$wgUseXVO = false;
-/**
+/**
* Internal server name as known to Squid, if different. Example:
* <code>
* $wgInternalServer = 'http://yourinternal.tld:8000';
/** Maximum number of titles to purge in any one client operation */
$wgMaxSquidPurgeTitles = 400;
-/**
+/**
* HTCP multicast address. Set this to a multicast IP address to enable HTCP.
*
- * Note that MediaWiki uses the old non-RFC compliant HTCP format, which was
+ * Note that MediaWiki uses the old non-RFC compliant HTCP format, which was
* present in the earliest Squid implementations of the protocol.
*/
$wgHTCPMulticastAddress = false;
-/**
- * HTCP multicast port.
+/**
+ * HTCP multicast port.
* @see $wgHTCPMulticastAddress
*/
$wgHTCPPort = 4827;
-/**
- * HTCP multicast TTL.
- * @see $wgHTCPMulticastAddress
+/**
+ * HTCP multicast TTL.
+ * @see $wgHTCPMulticastAddress
*/
$wgHTCPMulticastTTL = 1;
* These codes are leftoffs from renames, or other legacy things.
* Also, qqq is a dummy "language" for documenting messages.
*/
-$wgDummyLanguageCodes = array( 'qqq', 'als', 'be-x-old', 'dk', 'fiu-vro', 'iu', 'nb', 'simple', 'tp' );
+$wgDummyLanguageCodes = array(
+ 'als',
+ 'bat-smg',
+ 'be-x-old',
+ 'dk',
+ 'fiu-vro',
+ 'iu',
+ 'nb',
+ 'qqq',
+ 'simple',
+ 'tp',
+);
/** @deprecated Since MediaWiki 1.5, this must always be set to UTF-8. */
$wgInputEncoding = 'UTF-8';
$wgOutputEncoding = 'UTF-8';
/**
- * Character set for use in the article edit box. Language-specific encodings
- * may be defined.
+ * Character set for use in the article edit box. Language-specific encodings
+ * may be defined.
*
- * This historic feature is one of the first that was added by former MediaWiki
+ * This historic feature is one of the first that was added by former MediaWiki
* team leader Brion Vibber, and is used to support the Esperanto x-system.
*/
$wgEditEncoding = '';
/**
- * Set this to true to replace Arabic presentation forms with their standard
+ * Set this to true to replace Arabic presentation forms with their standard
* forms in the U+0600-U+06FF block. This only works if $wgLanguageCode is
* set to "ar".
*
- * Note that pages with titles containing presentation forms will become
+ * Note that pages with titles containing presentation forms will become
* inaccessible, run maintenance/cleanupTitles.php to fix this.
*/
$wgFixArabicUnicode = true;
/**
* Set this to true to replace ZWJ-based chillu sequences in Malayalam text
- * with their Unicode 5.1 equivalents. This only works if $wgLanguageCode is
- * set to "ml". Note that some clients (even new clients as of 2010) do not
- * support these characters.
+ * with their Unicode 5.1 equivalents. This only works if $wgLanguageCode is
+ * set to "ml". Note that some clients (even new clients as of 2010) do not
+ * support these characters.
*
* If you enable this on an existing wiki, run maintenance/cleanupTitles.php to
* fix any ZWJ sequences in existing page titles.
$wgAllUnicodeFixes = false;
/**
- * Set this to eg 'ISO-8859-1' to perform character set conversion when
- * loading old revisions not marked with "utf-8" flag. Use this when
- * converting a wiki from MediaWiki 1.4 or earlier to UTF-8 without the
+ * Set this to eg 'ISO-8859-1' to perform character set conversion when
+ * loading old revisions not marked with "utf-8" flag. Use this when
+ * converting a wiki from MediaWiki 1.4 or earlier to UTF-8 without the
* burdensome mass conversion of old text data.
*
- * NOTE! This DOES NOT touch any fields other than old_text.Titles, comments,
- * user names, etc still must be converted en masse in the database before
+ * NOTE! This DOES NOT touch any fields other than old_text.Titles, comments,
+ * user names, etc still must be converted en masse in the database before
* continuing as a UTF-8 wiki.
*/
$wgLegacyEncoding = false;
/**
- * Browser Blacklist for unicode non compliant browsers. Contains a list of
- * regexps : "/regexp/" matching problematic browsers. These browsers will
+ * Browser Blacklist for unicode non compliant browsers. Contains a list of
+ * regexps : "/regexp/" matching problematic browsers. These browsers will
* be served encoded unicode in the edit box instead of real unicode.
*/
$wgBrowserBlackList = array(
*/
$wgLegacySchemaConversion = false;
-/**
+/**
* Enable to allow rewriting dates in page text.
* DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES.
*/
$wgUseDynamicDates = false;
-/**
+/**
* Enable dates like 'May 12' instead of '12 May', this only takes effect if
* the interface is set to English.
*/
*/
$wgMaxMsgCacheEntrySize = 10000;
-/**
- * If true, serialized versions of the messages arrays will be
- * read from the 'serialized' subdirectory if they are present.
- * Set to false to always use the Messages files, regardless of
- * whether they are up to date or not.
- */
-$wgEnableSerializedMessages = true;
-
-/**
- * Set to false if you are thorough system admin who always remembers to keep
- * serialized files up to date to save few mtime calls.
- */
-$wgCheckSerialized = true;
-
/** Whether to enable language variant conversion. */
$wgDisableLangConversion = false;
/** Whether to enable language variant conversion for links. */
$wgDisableTitleConversion = false;
+/** Whether to enable cononical language links in meta data. */
+$wgCanonicalLanguageLinks = true;
+
/** Default variant code, if false, the default will be the language code */
$wgDefaultLanguageVariant = false;
-/**
+/**
* Disabled variants array of language variant conversion. Example:
* <code>
* $wgDisabledVariants[] = 'zh-mo';
*/
$wgLoginLanguageSelector = false;
-/**
- * Whether to use zhdaemon to perform Chinese text processing
- * zhdaemon is under developement, so normally you don't want to
- * use it unless for testing.
- */
-$wgUseZhdaemon = false;
-$wgZhdaemonHost="localhost";
-$wgZhdaemonPort=2004;
-
/**
* When translating messages with wfMsg(), it is not always clear what should
* be considered UI messages and what should be content messages.
$wgXhtmlDefaultNamespace = 'http://www.w3.org/1999/xhtml';
/**
- * Should we output an HTML5 doctype? This mode is still experimental, but
- * all indications are that it should be usable, so it's enabled by default.
- * If all goes well, it will be removed and become always true before the 1.16
- * release.
+ * Should we output an HTML5 doctype? If false, use XHTML 1.0 Transitional
+ * instead, and disable HTML5 features. This may eventually be removed and set
+ * to always true.
*/
$wgHtml5 = true;
$wgXhtmlNamespaces = array();
/**
- * Show IP address, for non-logged in users. It's necessary to switch this off
+ * Show IP address, for non-logged in users. It's necessary to switch this off
* for some forms of caching.
*/
$wgShowIPinHeader = true;
$wgExtraSubtitle = '';
/**
- * If this is set, a "donate" link will appear in the sidebar. Set it to a URL.
+ * If this is set, a "donate" link will appear in the sidebar. Set it to a URL.
*/
$wgSiteSupportPage = '';
$wgAllowUserSkin = true;
/**
- * Specify the name of a skin that should not be presented in the list of
- * available skins. Use for blacklisting a skin which you do not want to
+ * Specify the name of a skin that should not be presented in the list of
+ * available skins. Use for blacklisting a skin which you do not want to
* remove from the .../skins/ directory
*/
$wgSkipSkin = '';
/** Use the site's Cascading Style Sheets (CSS)? */
$wgUseSiteCss = true;
-/**
- * Version of jQuery to use. Currently available versions are 1.3.2 and 1.4.2 .
- * Other versions can be installed by hand at your own risk, see
- * http://www.mediawiki.org/wiki/Manual:$wgJQueryVersion
- */
-$wgJQueryVersion = '1.4.2';
-
-/**
- * Use a minified version of jQuery. If enabled, jquery-versionnumber.min.js
- * will be used instead of jquery-versionnumber.js . It is recommended you only
- * disable this for debugging purposes.
- */
-$wgJQueryMinified = true;
-
-/**
- * Include jQuery on every page served by MediaWiki. You can disable this if
- * your user/site-wide JS doesn't need it and you want to save bandwidth.
- */
-$wgJQueryOnEveryPage = true;
-
/**
* Set to false to disable application of access keys and tooltips,
* eg to avoid keyboard conflicts with system keys or as a low-level
* and 8, and Opera 10.50, but it fails in Opera 10.10: Unicode IDs don't seem
* to work as anchors. So not quite ready for general use yet.
*/
-$wgExperimentalHtmlIds = false;
+$wgExperimentalHtmlIds = true;
+
+/**
+ * Abstract list of footer icons for skins in place of old copyrightico and poweredbyico code
+ * You can add new icons to the built in copyright or poweredby, or you can create
+ * a new block. Though note that you may need to add some custom css to get good styling
+ * of new blocks in monobook. vector and modern should work without any special css.
+ *
+ * $wgFooterIcons itself is a key/value array.
+ * The key is the name of a block that the icons will be wrapped in. The final id varies
+ * by skin; Monobook and Vector will turn poweredby into f-poweredbyico while Modern
+ * turns it into mw_poweredby. The value is a key/value array of icons. The key may or
+ * may not be used by the skin but it can be used to find the icon and unset it or
+ * change the icon if needed. This is useful for disabling icons that are set by extensions.
+ * The value should be either a string or an array. If it is a string it will be output
+ * directly, however some skins may choose to ignore it. An array is the preferred format
+ * for the icon, the following keys are used:
+ * src: An absolute url to the image to use for the icon, this is recommended
+ * but not required, however some skins will ignore icons without an image
+ * url: The url to use in the <a> arround the text or icon, if not set an <a> will not be outputted
+ * alt: This is the text form of the icon, it will be displayed without an image in
+ * skins like Modern or if src is not set, and will otherwise be used as
+ * the alt="" for the image. This key is required.
+ * width and height: If the icon specified by src is not of the standard size
+ * you can specify the size of image to use with these keys.
+ * Otherwise they will default to the standard 88x31.
+ */
+$wgFooterIcons = array(
+ "copyright" => array(
+ "copyright" => array(), // placeholder for the built in copyright icon
+ ),
+ "poweredby" => array(
+ "mediawiki" => array(
+ "src" => null, // Defaults to "$wgStylePath/common/images/poweredby_mediawiki_88x31.png"
+ "url" => "http://www.mediawiki.org/",
+ "alt" => "Powered by MediaWiki",
+ )
+ ),
+);
/**
* Search form behavior for Vector skin only
*/
$wgVectorShowVariantName = false;
-/**
- * Add extra stylesheets for Vector - This is only being used so that we can play around with different options while
- * keeping our CSS code in the SVN and not having to change the main Vector styles. This will probably go away later on.
- * null = add no extra styles
- * array = list of style paths relative to skins/vector/
- */
-$wgVectorExtraStyles = null;
-
/**
* Display user edit counts in various prominent places.
*/
/** @} */ # End of output format settings }
+/*************************************************************************//**
+ * @name Resource loader settings
+ * @{
+ */
+
+/**
+ * Client-side resource modules. Extensions should add their module definitions
+ * here.
+ *
+ * Example:
+ * $wgResourceModules['ext.myExtension'] = array(
+ * 'scripts' => 'myExtension.js',
+ * 'styles' => 'myExtension.css',
+ * 'dependencies' => array( 'jquery.cookie', 'jquery.tabIndex' ),
+ * 'localBasePath' => dirname( __FILE__ ),
+ * 'remoteExtPath' => 'MyExtension',
+ * );
+ */
+$wgResourceModules = array();
+
+/**
+ * Maximum time in seconds to cache resources served by the resource loader
+ */
+$wgResourceLoaderMaxage = array(
+ 'versioned' => array(
+ // Squid/Varnish but also any other public proxy cache between the client and MediaWiki
+ 'server' => 30 * 24 * 60 * 60, // 30 days
+ // On the client side (e.g. in the browser cache).
+ 'client' => 30 * 24 * 60 * 60, // 30 days
+ ),
+ 'unversioned' => array(
+ 'server' => 5 * 60, // 5 minutes
+ 'client' => 5 * 60, // 5 minutes
+ ),
+);
+
+/**
+ * Whether to embed private modules inline with HTML output or to bypass
+ * caching and check the user parameter against $wgUser to prevent
+ * unauthorized access to private modules.
+ */
+$wgResourceLoaderInlinePrivateModules = true;
+
+/**
+ * The default debug mode (on/off) for of ResourceLoader requests. This will still
+ * be overridden when the debug URL parameter is used.
+ */
+$wgResourceLoaderDebug = false;
+
+/**
+ * Enable embedding of certain resources using Edge Side Includes. This will
+ * improve performance but only works if there is something in front of the
+ * web server (e..g a Squid or Varnish server) configured to process the ESI.
+ */
+$wgResourceLoaderUseESI = false;
+
+/** @} */ # End of resource loader settings }
+
+
/*************************************************************************//**
* @name Page title and interwiki link settings
* @{
/**
* Additional namespaces. If the namespaces defined in Language.php and
* Namespace.php are insufficient, you can create new ones here, for example,
- * to import Help files in other languages.
+ * to import Help files in other languages. You can also override the namespace
+ * names of existing namespaces. Extensions developers should use
+ * $wgCanonicalNamespaceNames.
+ *
* PLEASE NOTE: Once you delete a namespace, the pages in that namespace will
* no longer be accessible. If you rename it, then you can access them through
* the new namespace name.
# 102 => "Aide",
# 103 => "Discussion_Aide"
# );
-$wgExtraNamespaces = null;
+$wgExtraNamespaces = array();
/**
* Namespace aliases
*/
$wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF+";
-$wgLocalInterwiki = 'w';
-$wgInterwikiExpiry = 10800; # Expiry time for cache of interwiki table
+/**
+ * The interwiki prefix of the current wiki, or false if it doesn't have one.
+ */
+$wgLocalInterwiki = false;
+
+/**
+ * Expiry time for cache of interwiki table
+ */
+$wgInterwikiExpiry = 10800;
/** Interwiki caching settings.
$wgInterwikiCache specifies path to constant database file
/** Whether to allow inline image pointing to other websites */
$wgAllowExternalImages = false;
-/**
+/**
* If the above is false, you can specify an exception here. Image URLs
* that start with this string are then rendered, while all others are not.
* You can use this to set up a trusted, simple repository of images.
$wgAllowDisplayTitle = true;
/**
- * For consistency, restrict DISPLAYTITLE to titles that normalize to the same
+ * For consistency, restrict DISPLAYTITLE to titles that normalize to the same
* canonical DB key.
*/
$wgRestrictDisplayTitle = true;
*/
$wgMinimalPasswordLength = 1;
+/**
+ * Enabes or disables JavaScript-based suggestions of password strength
+ */
+$wgLivePasswordStrengthChecks = false;
+
+/**
+ * List of weak passwords which shouldn't be allowed.
+ * The items should be in lowercase. The check is case insensitive.
+ */
+$wgWeakPasswords = array( 'password', 'passpass', 'passpass1' );
+
/**
* Maximum number of Unicode characters in signature
*/
'imagesize' => 2,
'justify' => 0,
'math' => 1,
+ 'minordefault' => 0,
'newpageshidepatrolled' => 0,
'nocache' => 0,
'noconvertlink' => 0,
* info be provided. Check the file where your auth mechanism is defined for
* info on what to put here.
*/
-$wgExternalAuthConfig = array();
+$wgExternalAuthConf = array();
/**
* When should we automatically create local accounts when external accounts
*/
$wgAllowPrefChange = array();
+/**
+ * This is to let user authenticate using https when they come from http.
+ * Based on an idea by George Herbert on wikitech-l:
+ * http://lists.wikimedia.org/pipermail/wikitech-l/2010-October/050065.html
+ * @since 1.17
+ */
+$wgSecureLogin = false;
+/**
+ * Default for 'use secure login' checkbox
+ * @since 1.17
+ */
+$wgSecureLoginStickHTTPS = false;
+
/** @} */ # end user accounts }
/************************************************************************//**
/** Allow sysops to ban IP ranges */
$wgSysopRangeBans = true;
-/**
+/**
* Number of seconds before autoblock entries expire. Default 86400 = 1 day.
*/
$wgAutoblockExpiry = 86400;
-/**
+/**
* Set this to true to allow blocked users to edit their own user talk page.
*/
$wgBlockAllowsUTEdit = false;
$wgSysopEmailBans = true;
/**
- * Limits on the possible sizes of range blocks.
+ * Limits on the possible sizes of range blocks.
*
- * CIDR notation is hard to understand, it's easy to mistakenly assume that a
- * /1 is a small range and a /31 is a large range. Setting this to half the
+ * CIDR notation is hard to understand, it's easy to mistakenly assume that a
+ * /1 is a small range and a /31 is a large range. Setting this to half the
* number of bits avoids such errors.
*/
$wgBlockCIDRLimit = array(
*
* Special:Userlogin and Special:Resetpass are always whitelisted.
*
- * NOTE: This will only work if $wgGroupPermissions['*']['read'] is false --
+ * NOTE: This will only work if $wgGroupPermissions['*']['read'] is false --
* see below. Otherwise, ALL pages are accessible, regardless of this setting.
*
- * Also note that this will only protect _pages in the wiki_. Uploaded files
- * will remain readable. You can use img_auth.php to protect uploaded files,
+ * Also note that this will only protect _pages in the wiki_. Uploaded files
+ * will remain readable. You can use img_auth.php to protect uploaded files,
* see http://www.mediawiki.org/wiki/Manual:Image_Authorization
*/
$wgWhitelistRead = false;
$wgGroupPermissions['sysop']['noratelimit'] = true;
$wgGroupPermissions['sysop']['movefile'] = true;
$wgGroupPermissions['sysop']['unblockself'] = true;
+$wgGroupPermissions['sysop']['suppressredirect'] = true;
#$wgGroupPermissions['sysop']['mergehistory'] = true;
// Permission to change users' group assignments
// For private suppression log access
#$wgGroupPermissions['suppress']['suppressionlog'] = true;
+// Permission to disable user accounts
+// Note that disabling an account is not reversible without a system administrator
+// who has direct access to the database
+#$wgGroupPermissions['bureaucrat']['disableaccount'] = true;
+
/**
* The developer group is deprecated, but can be activated if need be
* to use the 'lockdb' and 'unlockdb' special pages. Those require
$wgNonincludableNamespaces = array();
/**
- * Number of seconds an account is required to age before it's given the
- * implicit 'autoconfirm' group membership. This can be used to limit
+ * Number of seconds an account is required to age before it's given the
+ * implicit 'autoconfirm' group membership. This can be used to limit
* privileges of new accounts.
*
- * Accounts created by earlier versions of the software may not have a
+ * Accounts created by earlier versions of the software may not have a
* recorded creation date, and will always be considered to pass the age test.
*
* When left at 0, all registered accounts will pass.
);
/**
- * $wgAddGroups and $wgRemoveGroups can be used to give finer control over who
+ * $wgAddGroups and $wgRemoveGroups can be used to give finer control over who
* can assign which groups at Special:Userrights. Example configuration:
*
* @code
/** Same as the above except for edit summaries */
$wgSummarySpamRegex = array();
-/**
+/**
* Similarly you can get a function to do the job. The function will be given
* the following args:
* - a Title object for the article the edit is made on
*/
$wgRateLimitsExcludedIPs = array();
-/**
- * Log IP addresses in the recentchanges table; can be accessed only by
- * extensions (e.g. CheckUser) or a DB admin
+/**
+ * Log IP addresses in the recentchanges table; can be accessed only by
+ * extensions (e.g. CheckUser) or a DB admin
*/
$wgPutIPinRC = true;
*/
$wgUseTeX = false;
/** Location of the texvc binary */
-$wgTexvc = './math/texvc';
+$wgTexvc = $IP . '/math/texvc';
/**
* Texvc background color
* use LaTeX color format as used in \special function
*/
$wgShowSQLErrors = false;
-/**
- * If true, some error messages will be colorized when running scripts on the
- * command line; this can aid picking important things out when debugging.
- * Ignored when running on Windows or when output is redirected to a file.
- */
-$wgColorErrors = true;
-
/**
* If set to true, uncaught exceptions will print a complete stack trace
* to output. This should only be used for debugging, as it may reveal
/** Don't put non-profiling info into log file */
$wgProfileOnly = false;
-/**
+/**
* Log sums from profiling into "profiling" table in db.
*
* You have to create a 'profiling' table in your database before using
/** Should application server host be put into profiling table */
$wgProfilePerHost = false;
-/**
+/**
* Host for UDP profiler.
*
- * The host should be running a daemon which can be obtained from MediaWiki
+ * The host should be running a daemon which can be obtained from MediaWiki
* Subversion at: http://svn.wikimedia.org/svnroot/mediawiki/trunk/udpprofile
*/
$wgUDPProfilerHost = '127.0.0.1';
-/**
+/**
* Port for UDP profiler.
* @see $wgUDPProfilerHost
*/
* Use full paths.
*/
$wgParserTestFiles = array(
- "$IP/maintenance/parserTests.txt",
- "$IP/maintenance/ExtraParserTests.txt"
+ "$IP/tests/parser/parserTests.txt",
+ "$IP/tests/parser/extraParserTests.txt"
);
/**
*/
$wgParserTestRemote = false;
-/**
- * Enable Selenium test framework.
- * This enables maintenance/tests/RunSeleniumTests.php and [[Special:Selenium]].
- */
-$wgEnableSelenium = false;
-
-/** List of Selenium test classes. These must be registered with the autoloader. */
-$wgSeleniumTests = array(
- 'SimpleSeleniumTest'
-);
-
-
-/** Hostname of selenium server */
-$wgSeleniumTestsSeleniumHost = 'localhost';
-
-/** URL of the wiki to be tested. By default, the local wiki is used. */
-$wgSeleniumTestsWikiUrl = false;
-
-/** Port used by selenium server. */
-$wgSeleniumServerPort = 4444;
-
-/** Wiki login username. Used by Selenium to log onto the wiki. */
-$wgSeleniumTestsWikiUser = 'Wikiuser';
-
-/** Wiki login password. Used by Selenium to log onto the wiki. */
-$wgSeleniumTestsWikiPassword = '';
-
-/**
- * Common browsers on Windows platform. Modify for other platforms or
- * other Windows browsers.
- * Use the *chrome handler in order to be able to test file uploads.
- * Further solution suggestions: http://www.brokenbuild.com/blog/2007/06/07/testing-file-uploads-with-selenium-rc-and-firefoxor-reducing-javascript-security-in-firefox-for-fun-and-profit/
- */
-$wgSeleniumTestsBrowsers = array(
- 'firefox' => '*firefox /usr/bin/firefox',
- 'iexplorer' => '*iexploreproxy',
- 'opera' => '*chrome /usr/bin/opera',
-);
-
-/** Actually, use this browser */
-$wgSeleniumTestsUseBrowser = 'firefox';
-
-
-
/** @} */ # end of profiling, testing and debugging }
/************************************************************************//**
*/
$wgDisableTextSearch = false;
-/**
- * Set this to true to disable the context which appears on search result pages.
- * Search context can cause a high DB load.
- */
-$wgDisableSearchContext = false;
-
/**
* Set to true to have nicer highligted text in search results,
* by default off due to execution overhead
/**
* Regexp to match word boundaries, defaults for non-CJK languages
* should be empty for CJK since the words are not separate
+ *
+ * @todo FIXME: checks for lower than required PHP version (5.1.x).
*/
$wgSearchHighlightBoundaries = version_compare("5.1", PHP_VERSION, "<")? '[\p{Z}\p{P}\p{C}]'
: '[ ,.;:!?~!@#$%\^&*\(\)+=\-\\|\[\]"\'<>\n\r\/{}]'; // PHP 5.0 workaround
* @{
*/
-/**
+/**
* @cond file_level_code
* Set $wgCommandLineMode if it's not set already, to avoid notices
*/
*/
$wgReadOnly = null;
-/***
+/**
* If this lock file exists (size > 0), the wiki will be forced into read-only mode.
* Its contents will be shown to users as part of the read-only warning
* message.
*/
$wgReadOnlyFile = false;
+/**
+ * When you run the web-based upgrade utility, it will tell you what to set
+ * this to in order to authorize the upgrade process. It will subsequently be
+ * used as a password, to authorize further upgrades.
+ *
+ * For security, do not set this to a guessable string. Use the value supplied
+ * by the install/upgrade process. To cause the upgrader to generate a new key,
+ * delete the old key from LocalSettings.php.
+ */
+$wgUpgradeKey = false;
+
/** @} */ # End of maintenance }
/************************************************************************//**
$wgRCMaxAge = 13 * 7 * 24 * 3600;
/**
- * Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers
- * higher than what will be stored. Note that this is disabled by default
- * because we sometimes do have RC data which is beyond the limit for some
- * reason, and some users may use the high numbers to display that data which
+ * Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers
+ * higher than what will be stored. Note that this is disabled by default
+ * because we sometimes do have RC data which is beyond the limit for some
+ * reason, and some users may use the high numbers to display that data which
* is still there.
*/
$wgRCFilterByAge = false;
/**
- * List of Days and Limits options to list in the Special:Recentchanges and
+ * List of Days and Limits options to list in the Special:Recentchanges and
* Special:Recentchangeslinked pages.
*/
$wgRCLinkLimits = array( 50, 100, 250, 500 );
$wgRightsText = null;
$wgRightsIcon = null;
+/**
+ * Set to an array of metadata terms. Else they will be loaded based on $wgRightsUrl
+ */
+$wgLicenseTerms = false;
+
/** Set this to some HTML to override the rights icon with an arbitrary logo */
$wgCopyrightIcon = null;
*/
$wgExceptionHooks = array();
+
/**
* Page property link table invalidation lists. When a page property
* changes, this may require other link tables to be updated (eg
*/
$wgCategoryPagingLimit = 200;
-/**
- * Should the default category sortkey be the prefixed title?
- * Run maintenance/refreshLinks.php after changing this.
- */
-$wgCategoryPrefixedDefaultSortkey = true;
-
-/**
- * Enable experimental support for non-braindead collation on category pages.
- * For this to work, you need to alter your categorylinks table by applying
- * maintenance/archives/patch-categorylinks-better-collation.sql, then keep
- * up-to-date with changes that are made to that file (they won't be
- * automatically applied). You should also set $wgUseDumbLinkUpdate = true and
- * run maintenance/refreshLinks.php.
- */
-$wgExperimentalCategorySort = false;
-
/**
* A version indicator for collations that will be stored in cl_collation for
* all new rows. Used when the collation algorithm changes: a script checks
- * for all rows where cl_collation < $wgCollationVersion and regenerates
- * cl_sortkey based on cl_raw_sortkey.
+ * for all rows where cl_collation != $wgCategoryCollation and regenerates
+ * cl_sortkey based on the page name and cl_sortkey_prefix.
+ *
+ * Currently only supports 'uppercase', which just uppercases the string. This
+ * is a dummy collation, to be replaced later by real ones.
*/
-$wgCollationVersion = 1;
+$wgCategoryCollation = 'uppercase';
/** @} */ # End categories }
'protect/unprotect' => 'unprotectedarticle',
'protect/move_prot' => 'movedarticleprotection',
'rights/rights' => 'rightslogentry',
+ 'rights/disable' => 'disableaccount-logentry',
'delete/delete' => 'deletedarticle',
'delete/restore' => 'undeletedarticle',
'delete/revision' => 'revdelete-logentry',
/************************************************************************//**
* @name AJAX and API
- * Note: The AJAX entry point which this section refers to is gradually being
+ * Note: The AJAX entry point which this section refers to is gradually being
* replaced by the API entry point, api.php. They are essentially equivalent.
- * Both of them are used for dynamic client-side features, via XHR.
+ * Both of them are used for dynamic client-side features, via XHR.
* @{
*/
* The remaining elements are passed through to the class as constructor
* parameters. Example:
*
- * $wgPoolCounterConf = array( 'Article::view' => array(
+ * $wgPoolCounterConf = array( 'ArticleView' => array(
* 'class' => 'PoolCounter_Client',
+ * 'timeout' => 15, // wait timeout in seconds
+ * 'workers' => 5, // maximum number of active threads in each pool
+ * 'maxqueue' => 50, // maximum number of total threads in each pool
* ... any extension-specific options...
* );
*/
*/
$wgUploadMaintenance = false;
+/**
+ * Allows running of selenium tests via maintenance/tests/RunSeleniumTests.php
+ */
+$wgEnableSelenium = false;
+$wgSeleniumTestConfigs = array();
+$wgSeleniumConfigFile = null;
+
/**
* For really cool vim folding this needs to be at the end:
* vim: foldmarker=@{,@} foldmethod=marker
dépôts / lhc / web / wiklou.git / blobdiff