7 * To customize your installation, edit "LocalSettings.php". If you make
8 * changes here, they will be lost on next upgrade of MediaWiki!
10 * Note that since all these string interpolations are expanded
11 * before LocalSettings is included, if you localize something
12 * like $wgScriptPath, you must also localize everything that
15 * Documentation is in the source and on:
16 * http://www.mediawiki.org/wiki/Manual:Configuration_settings
20 # This is not a valid entry point, perform no further processing unless MEDIAWIKI is defined
21 if( !defined( 'MEDIAWIKI' ) ) {
22 echo "This file is part of MediaWiki and is not a valid entry point\n";
27 * Create a site configuration object
28 * Not used for much in a default install
30 if ( !defined( 'MW_PHP4' ) ) {
31 require_once( "$IP/includes/SiteConfiguration.php" );
32 $wgConf = new SiteConfiguration
;
35 /** MediaWiki version number */
36 $wgVersion = '1.16alpha';
38 /** Name of the site. It must be changed in LocalSettings.php */
39 $wgSitename = 'MediaWiki';
42 * Name of the project namespace. If left set to false, $wgSitename will be
45 $wgMetaNamespace = false;
48 * Name of the project talk namespace.
50 * Normally you can ignore this and it will be something like
51 * $wgMetaNamespace . "_talk". In some languages, you may want to set this
52 * manually for grammatical reasons. It is currently only respected by those
53 * languages where it might be relevant and where no automatic grammar converter
56 $wgMetaNamespaceTalk = false;
59 /** URL of the server. It will be automatically built including https mode */
62 if( isset( $_SERVER['SERVER_NAME'] ) ) {
63 $wgServerName = $_SERVER['SERVER_NAME'];
64 } elseif( isset( $_SERVER['HOSTNAME'] ) ) {
65 $wgServerName = $_SERVER['HOSTNAME'];
66 } elseif( isset( $_SERVER['HTTP_HOST'] ) ) {
67 $wgServerName = $_SERVER['HTTP_HOST'];
68 } elseif( isset( $_SERVER['SERVER_ADDR'] ) ) {
69 $wgServerName = $_SERVER['SERVER_ADDR'];
71 $wgServerName = 'localhost';
74 # check if server use https:
75 $wgProto = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] == 'on') ?
'https' : 'http';
77 $wgServer = $wgProto.'://' . $wgServerName;
78 # If the port is a non-standard one, add it to the URL
79 if( isset( $_SERVER['SERVER_PORT'] )
80 && !strpos( $wgServerName, ':' )
81 && ( ( $wgProto == 'http' && $_SERVER['SERVER_PORT'] != 80 )
82 ||
( $wgProto == 'https' && $_SERVER['SERVER_PORT'] != 443 ) ) ) {
84 $wgServer .= ":" . $_SERVER['SERVER_PORT'];
89 * The path we should point to.
90 * It might be a virtual path in case with use apache mod_rewrite for example
92 * This *needs* to be set correctly.
94 * Other paths will be set to defaults based on it unless they are directly
95 * set in LocalSettings.php
97 $wgScriptPath = '/wiki';
100 * Whether to support URLs like index.php/Page_title These often break when PHP
101 * is set up in CGI mode. PATH_INFO *may* be correct if cgi.fix_pathinfo is set,
102 * but then again it may not; lighttpd converts incoming path data to lowercase
103 * on systems with case-insensitive filesystems, and there have been reports of
104 * problems on Apache as well.
106 * To be safe we'll continue to keep it off by default.
108 * Override this to false if $_SERVER['PATH_INFO'] contains unexpectedly
109 * incorrect garbage, or to true if it is really correct.
111 * The default $wgArticlePath will be set based on this value at runtime, but if
112 * you have customized it, having this incorrectly set to true can cause
113 * redirect loops when "pretty URLs" are used.
116 ( strpos( php_sapi_name(), 'cgi' ) === false ) &&
117 ( strpos( php_sapi_name(), 'apache2filter' ) === false ) &&
118 ( strpos( php_sapi_name(), 'isapi' ) === false );
122 * Script users will request to get articles
123 * ATTN: Old installations used wiki.phtml and redirect.phtml - make sure that
124 * LocalSettings.php is correctly set!
126 * Will be set based on $wgScriptPath in Setup.php if not overridden in
127 * LocalSettings.php. Generally you should not need to change this unless you
128 * don't like seeing "index.php".
130 $wgScriptExtension = '.php'; ///< extension to append to script names by default
131 $wgScript = false; ///< defaults to "{$wgScriptPath}/index{$wgScriptExtension}"
132 $wgRedirectScript = false; ///< defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}"
137 * These various web and file path variables are set to their defaults
138 * in Setup.php if they are not explicitly set from LocalSettings.php.
139 * If you do override them, be sure to set them all!
141 * These will relatively rarely need to be set manually, unless you are
142 * splitting style sheets or images outside the main document root.
145 * style path as seen by users
147 $wgStylePath = false; ///< defaults to "{$wgScriptPath}/skins"
149 * filesystem stylesheets directory
151 $wgStyleDirectory = false; ///< defaults to "{$IP}/skins"
152 $wgStyleSheetPath = &$wgStylePath;
153 $wgArticlePath = false; ///< default to "{$wgScript}/$1" or "{$wgScript}?title=$1", depending on $wgUsePathInfo
154 $wgVariantArticlePath = false;
155 $wgUploadPath = false; ///< defaults to "{$wgScriptPath}/images"
156 $wgUploadDirectory = false; ///< defaults to "{$IP}/images"
157 $wgHashedUploadDirectory = true;
158 $wgLogo = false; ///< defaults to "{$wgStylePath}/common/images/wiki.png"
159 $wgFavicon = '/favicon.ico';
160 $wgAppleTouchIcon = false; ///< This one'll actually default to off. For iPhone and iPod Touch web app bookmarks
161 $wgMathPath = false; ///< defaults to "{$wgUploadPath}/math"
162 $wgMathDirectory = false; ///< defaults to "{$wgUploadDirectory}/math"
163 $wgTmpDirectory = false; ///< defaults to "{$wgUploadDirectory}/tmp"
164 $wgUploadBaseUrl = "";
168 * Default value for chmoding of new directories.
170 $wgDirectoryMode = 0777;
173 * New file storage paths; currently used only for deleted files.
176 * $wgFileStore['deleted']['directory'] = '/var/wiki/private/deleted';
179 $wgFileStore = array();
180 $wgFileStore['deleted']['directory'] = false;///< Defaults to $wgUploadDirectory/deleted
181 $wgFileStore['deleted']['url'] = null; ///< Private
182 $wgFileStore['deleted']['hash'] = 3; ///< 3-level subdirectory split
185 * File repository structures
187 * $wgLocalFileRepo is a single repository structure, and $wgForeignFileRepo is
188 * a an array of such structures. Each repository structure is an associative
189 * array of properties configuring the repository.
191 * Properties required for all repos:
192 * class The class name for the repository. May come from the core or an extension.
193 * The core repository classes are LocalRepo, ForeignDBRepo, FSRepo.
195 * name A unique name for the repository.
197 * For all core repos:
198 * url Base public URL
199 * hashLevels The number of directory levels for hash-based division of files
200 * thumbScriptUrl The URL for thumb.php (optional, not recommended)
201 * transformVia404 Whether to skip media file transformation on parse and rely on a 404
203 * initialCapital Equivalent to $wgCapitalLinks, determines whether filenames implicitly
204 * start with a capital letter. The current implementation may give incorrect
205 * description page links when the local $wgCapitalLinks and initialCapital
207 * pathDisclosureProtection
208 * May be 'paranoid' to remove all parameters from error messages, 'none' to
209 * leave the paths in unchanged, or 'simple' to replace paths with
210 * placeholders. Default for LocalRepo is 'simple'.
211 * fileMode This allows wikis to set the file mode when uploading/moving files. Default
214 * These settings describe a foreign MediaWiki installation. They are optional, and will be ignored
215 * for local repositories:
216 * descBaseUrl URL of image description pages, e.g. http://en.wikipedia.org/wiki/Image:
217 * scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g.
218 * http://en.wikipedia.org/w
220 * articleUrl Equivalent to $wgArticlePath, e.g. http://en.wikipedia.org/wiki/$1
221 * fetchDescription Fetch the text of the remote file description page. Equivalent to
222 * $wgFetchCommonsDescriptions.
225 * dbType, dbServer, dbUser, dbPassword, dbName, dbFlags
226 * equivalent to the corresponding member of $wgDBservers
227 * tablePrefix Table prefix, the foreign wiki's $wgDBprefix
228 * hasSharedCache True if the wiki's shared cache is accessible via the local $wgMemc
231 * apibase Use for the foreign API's URL
232 * apiThumbCacheExpiry How long to locally cache thumbs for
234 * The default is to initialise these arrays from the MW<1.11 backwards compatible settings:
235 * $wgUploadPath, $wgThumbnailScriptPath, $wgSharedUploadDirectory, etc.
237 $wgLocalFileRepo = false;
238 $wgForeignFileRepos = array();
242 * Allowed title characters -- regex character class
243 * Don't change this unless you know what you're doing
245 * Problematic punctuation:
246 * []{}|# Are needed for link syntax, never enable these
247 * <> Causes problems with HTML escaping, don't use
248 * % Enabled by default, minor problems with path to query rewrite rules, see below
249 * + Enabled by default, but doesn't work with path to query rewrite rules, corrupted by apache
250 * ? Enabled by default, but doesn't work with path to PATH_INFO rewrites
252 * All three of these punctuation problems can be avoided by using an alias, instead of a
253 * rewrite rule of either variety.
255 * The problem with % is that when using a path to query rewrite rule, URLs are
256 * double-unescaped: once by Apache's path conversion code, and again by PHP. So
257 * %253F, for example, becomes "?". Our code does not double-escape to compensate
258 * for this, indeed double escaping would break if the double-escaped title was
259 * passed in the query string rather than the path. This is a minor security issue
260 * because articles can be created such that they are hard to view or edit.
262 * In some rare cases you may wish to remove + for compatibility with old links.
264 * Theoretically 0x80-0x9F of ISO 8859-1 should be disallowed, but
265 * this breaks interlanguage links
267 $wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF+";
271 * The external URL protocols
273 $wgUrlProtocols = array(
279 'telnet://', // Well if we're going to support the above.. -ævar
280 'nntp://', // @bug 3808 RFC 1738
287 /** internal name of virus scanner. This servers as a key to the $wgAntivirusSetup array.
288 * Set this to NULL to disable virus scanning. If not null, every file uploaded will be scanned for viruses.
292 /** Configuration for different virus scanners. This an associative array of associative arrays:
293 * it contains on setup array per known scanner type. The entry is selected by $wgAntivirus, i.e.
294 * valid values for $wgAntivirus are the keys defined in this array.
296 * The configuration array for each scanner contains the following keys: "command", "codemap", "messagepattern";
298 * "command" is the full command to call the virus scanner - %f will be replaced with the name of the
299 * file to scan. If not present, the filename will be appended to the command. Note that this must be
300 * overwritten if the scanner is not in the system path; in that case, plase set
301 * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full path.
303 * "codemap" is a mapping of exit code to return codes of the detectVirus function in SpecialUpload.
304 * An exit code mapped to AV_SCAN_FAILED causes the function to consider the scan to be failed. This will pass
305 * the file if $wgAntivirusRequired is not set.
306 * An exit code mapped to AV_SCAN_ABORTED causes the function to consider the file to have an usupported format,
307 * which is probably imune to virusses. This causes the file to pass.
308 * An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning no virus was found.
309 * All other codes (like AV_VIRUS_FOUND) will cause the function to report a virus.
310 * You may use "*" as a key in the array to catch all exit codes not mapped otherwise.
312 * "messagepattern" is a perl regular expression to extract the meaningful part of the scanners
313 * output. The relevant part should be matched as group one (\1).
314 * If not defined or the pattern does not match, the full message is shown to the user.
316 $wgAntivirusSetup = array(
320 'command' => "clamscan --no-summary ",
323 "0" => AV_NO_VIRUS
, # no virus
324 "1" => AV_VIRUS_FOUND
, # virus found
325 "52" => AV_SCAN_ABORTED
, # unsupported file format (probably imune)
326 "*" => AV_SCAN_FAILED
, # else scan failed
329 'messagepattern' => '/.*?:(.*)/sim',
334 'command' => "f-prot ",
337 "0" => AV_NO_VIRUS
, # no virus
338 "3" => AV_VIRUS_FOUND
, # virus found
339 "6" => AV_VIRUS_FOUND
, # virus found
340 "*" => AV_SCAN_FAILED
, # else scan failed
343 'messagepattern' => '/.*?Infection:(.*)$/m',
348 /** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected. */
349 $wgAntivirusRequired= true;
351 /** Determines if the mime type of uploaded files should be checked */
352 $wgVerifyMimeType= true;
354 /** Sets the mime type definition file to use by MimeMagic.php. */
355 $wgMimeTypeFile= "includes/mime.types";
356 #$wgMimeTypeFile= "/etc/mime.types";
357 #$wgMimeTypeFile= NULL; #use built-in defaults only.
359 /** Sets the mime type info file to use by MimeMagic.php. */
360 $wgMimeInfoFile= "includes/mime.info";
361 #$wgMimeInfoFile= NULL; #use built-in defaults only.
363 /** Switch for loading the FileInfo extension by PECL at runtime.
364 * This should be used only if fileinfo is installed as a shared object
365 * or a dynamic libary
367 $wgLoadFileinfoExtension= false;
369 /** Sets an external mime detector program. The command must print only
370 * the mime type to standard output.
371 * The name of the file to process will be appended to the command given here.
372 * If not set or NULL, mime_content_type will be used if available.
374 $wgMimeDetectorCommand= NULL; # use internal mime_content_type function, available since php 4.3.0
375 #$wgMimeDetectorCommand= "file -bi"; #use external mime detector (Linux)
377 /** Switch for trivial mime detection. Used by thumb.php to disable all fance
378 * things, because only a few types of images are needed and file extensions
381 $wgTrivialMimeDetection= false;
384 * Additional XML types we can allow via mime-detection.
385 * array = ( 'rootElement' => 'associatedMimeType' )
387 $wgXMLMimeTypes = array(
388 'http://www.w3.org/2000/svg:svg' => 'image/svg+xml',
389 'svg' => 'image/svg+xml',
390 'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram',
391 'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml?
392 'html' => 'text/html', // application/xhtml+xml?
396 * To set 'pretty' URL paths for actions other than
397 * plain page views, add to this array. For instance:
398 * 'edit' => "$wgScriptPath/edit/$1"
400 * There must be an appropriate script or rewrite rule
401 * in place to handle these URLs.
403 $wgActionPaths = array();
406 * If you operate multiple wikis, you can define a shared upload path here.
407 * Uploads to this wiki will NOT be put there - they will be put into
408 * $wgUploadDirectory.
409 * If $wgUseSharedUploads is set, the wiki will look in the shared repository if
410 * no file of the given name is found in the local repository (for [[Image:..]],
411 * [[Media:..]] links). Thumbnails will also be looked for and generated in this
414 * Note that these configuration settings can now be defined on a per-
415 * repository basis for an arbitrary number of file repositories, using the
416 * $wgForeignFileRepos variable.
418 $wgUseSharedUploads = false;
419 /** Full path on the web server where shared uploads can be found */
420 $wgSharedUploadPath = "http://commons.wikimedia.org/shared/images";
421 /** Fetch commons image description pages and display them on the local wiki? */
422 $wgFetchCommonsDescriptions = false;
423 /** Path on the file system where shared uploads can be found. */
424 $wgSharedUploadDirectory = "/var/www/wiki3/images";
425 /** DB name with metadata about shared directory. Set this to false if the uploads do not come from a wiki. */
426 $wgSharedUploadDBname = false;
427 /** Optional table prefix used in database. */
428 $wgSharedUploadDBprefix = '';
429 /** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */
430 $wgCacheSharedUploads = true;
431 /** Allow for upload to be copied from an URL. Requires Special:Upload?source=web */
432 $wgAllowCopyUploads = false;
433 $wgCopyUploadTimeout = 30; // 30 seconds default timeout for upload-by-URL
436 * Max size for uploads, in bytes. Currently only works for uploads from URL
437 * via CURL (see $wgAllowCopyUploads). The only way to impose limits on
438 * normal uploads is currently to edit php.ini.
440 $wgMaxUploadSize = 1024*1024*100; # 100MB
443 * Point the upload navigation link to an external URL
444 * Useful if you want to use a shared repository by default
445 * without disabling local uploads (use $wgEnableUploads = false for that)
446 * e.g. $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
448 $wgUploadNavigationUrl = false;
451 * Give a path here to use thumb.php for thumbnail generation on client request, instead of
452 * generating them on render and outputting a static URL. This is necessary if some of your
453 * apache servers don't have read/write access to the thumbnail path.
456 * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb{$wgScriptExtension}";
458 $wgThumbnailScriptPath = false;
459 $wgSharedThumbnailScriptPath = false;
462 * Set the following to false especially if you have a set of files that need to
463 * be accessible by all wikis, and you do not want to use the hash (path/a/aa/)
466 $wgHashedSharedUploadDirectory = true;
469 * Base URL for a repository wiki. Leave this blank if uploads are just stored
470 * in a shared directory and not meant to be accessible through a separate wiki.
471 * Otherwise the image description pages on the local wiki will link to the
472 * image description page on this wiki.
474 * Please specify the namespace, as in the example below.
476 $wgRepositoryBaseUrl = "http://commons.wikimedia.org/wiki/Image:";
483 * Site admin email address
484 * Default to wikiadmin@SERVER_NAME
486 $wgEmergencyContact = 'wikiadmin@' . $wgServerName;
489 * Password reminder email address
490 * The address we should use as sender when a user is requesting his password
491 * Default to apache@SERVER_NAME
493 $wgPasswordSender = 'MediaWiki Mail <apache@' . $wgServerName . '>';
496 * dummy address which should be accepted during mail send action
497 * It might be necessay to adapt the address or to set it equal
498 * to the $wgEmergencyContact address
500 #$wgNoReplyAddress = $wgEmergencyContact;
501 $wgNoReplyAddress = 'reply@not.possible';
504 * Set to true to enable the e-mail basic features:
505 * Password reminders, etc. If sending e-mail on your
506 * server doesn't work, you might want to disable this.
508 $wgEnableEmail = true;
511 * Set to true to enable user-to-user e-mail.
512 * This can potentially be abused, as it's hard to track.
514 $wgEnableUserEmail = true;
517 * Set to true to put the sending user's email in a Reply-To header
518 * instead of From. ($wgEmergencyContact will be used as From.)
520 * Some mailers (eg sSMTP) set the SMTP envelope sender to the From value,
521 * which can cause problems with SPF validation and leak recipient addressses
522 * when bounces are sent to the sender.
524 $wgUserEmailUseReplyTo = false;
527 * Minimum time, in hours, which must elapse between password reminder
528 * emails for a given account. This is to prevent abuse by mail flooding.
530 $wgPasswordReminderResendTime = 24;
533 * The time, in seconds, when an emailed temporary password expires.
535 $wgNewPasswordExpiry = 3600 * 24 * 7;
539 * For using a direct (authenticated) SMTP server connection.
540 * Default to false or fill an array :
542 * "host" => 'SMTP domain',
543 * "IDHost" => 'domain for MessageID',
545 * "auth" => true/false,
546 * "username" => user,
547 * "password" => password
556 /** database host name or ip address */
557 $wgDBserver = 'localhost';
558 /** database port number (for PostgreSQL) */
560 /** name of the database */
561 $wgDBname = 'my_wiki';
563 $wgDBconnection = '';
564 /** Database username */
565 $wgDBuser = 'wikiuser';
566 /** Database user's password */
572 * Leave as null to select the default search engine for the
573 * selected database type (eg SearchMySQL), or set to a class
574 * name to override to a custom search engine.
576 $wgSearchType = null;
578 /** Table name prefix */
580 /** MySQL table options to use during installation or update */
581 $wgDBTableOptions = 'ENGINE=InnoDB';
583 /** Mediawiki schema */
584 $wgDBmwschema = 'mediawiki';
585 /** Tsearch2 schema */
586 $wgDBts2schema = 'public';
588 /** To override default SQLite data directory ($docroot/../data) */
589 $wgSQLiteDataDir = '';
591 /** Default directory mode for SQLite data directory on creation.
592 * Note that this is different from the default directory mode used
595 $wgSQLiteDataDirMode = 0700;
598 * Make all database connections secretly go to localhost. Fool the load balancer
599 * thinking there is an arbitrarily large cluster of servers to connect to.
600 * Useful for debugging.
602 $wgAllDBsAreLocalhost = false;
607 /** Live high performance sites should disable this - some checks acquire giant mysql locks */
608 $wgCheckDBSchema = true;
612 * Shared database for multiple wikis. Commonly used for storing a user table
613 * for single sign-on. The server for this database must be the same as for the
615 * For backwards compatibility the shared prefix is set to the same as the local
616 * prefix, and the user table is listed in the default list of shared tables.
618 * $wgSharedTables may be customized with a list of tables to share in the shared
619 * datbase. However it is advised to limit what tables you do share as many of
620 * MediaWiki's tables may have side effects if you try to share them.
624 $wgSharedPrefix = false; # Defaults to $wgDBprefix
625 $wgSharedTables = array( 'user' );
628 * Database load balancer
629 * This is a two-dimensional array, an array of server info structures
632 * dbname: Default database name
634 * password: DB password
635 * type: "mysql" or "postgres"
636 * load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
637 * groupLoads: array of load ratios, the key is the query group name. A query may belong
638 * to several groups, the most specific group defined here is used.
641 * DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
642 * DBO_DEBUG -- equivalent of $wgDebugDumpSql
643 * DBO_TRX -- wrap entire request in a transaction
644 * DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
645 * DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
647 * max lag: (optional) Maximum replication lag before a slave will taken out of rotation
648 * max threads: (optional) Maximum number of running threads
650 * These and any other user-defined properties will be assigned to the mLBInfo member
651 * variable of the Database object.
653 * Leave at false to use the single-server variables above. If you set this
654 * variable, the single-server variables will generally be ignored (except
655 * perhaps in some command-line scripts).
657 * The first server listed in this array (with key 0) will be the master. The
658 * rest of the servers will be slaves. To prevent writes to your slaves due to
659 * accidental misconfiguration or MediaWiki bugs, set read_only=1 on all your
660 * slaves in my.cnf. You can set read_only mode at runtime using:
664 * Since the effect of writing to a slave is so damaging and difficult to clean
665 * up, we at Wikimedia set read_only=1 in my.cnf on all our DB servers, even
666 * our masters, and then set read_only=0 on masters at runtime.
668 $wgDBservers = false;
671 * Load balancer factory configuration
672 * To set up a multi-master wiki farm, set the class here to something that
673 * can return a LoadBalancer with an appropriate master on a call to getMainLB().
674 * The class identified here is responsible for reading $wgDBservers,
675 * $wgDBserver, etc., so overriding it may cause those globals to be ignored.
677 * The LBFactory_Multi class is provided for this purpose, please see
678 * includes/db/LBFactory_Multi.php for configuration information.
680 $wgLBFactoryConf = array( 'class' => 'LBFactory_Simple' );
682 /** How long to wait for a slave to catch up to the master */
683 $wgMasterWaitTimeout = 10;
685 /** File to log database errors to */
686 $wgDBerrorLog = false;
688 /** When to give an error message */
689 $wgDBClusterTimeout = 10;
692 * Scale load balancer polling time so that under overload conditions, the database server
693 * receives a SHOW STATUS query at an average interval of this many microseconds
695 $wgDBAvgStatusPoll = 2000;
697 /** Set to true if using InnoDB tables */
698 $wgDBtransactions = false;
699 /** Set to true for compatibility with extensions that might be checking.
700 * MySQL 3.23.x is no longer supported. */
704 * Set to true to engage MySQL 4.1/5.0 charset-related features;
705 * for now will just cause sending of 'SET NAMES=utf8' on connect.
707 * WARNING: THIS IS EXPERIMENTAL!
709 * May break if you're not using the table defs from mysql5/tables.sql.
710 * May break if you're upgrading an existing wiki if set differently.
711 * Broken symptoms likely to include incorrect behavior with page titles,
712 * usernames, comments etc containing non-ASCII characters.
713 * Might also cause failures on the object cache and other things.
715 * Even correct usage may cause failures with Unicode supplementary
716 * characters (those not in the Basic Multilingual Plane) unless MySQL
717 * has enhanced their Unicode support.
722 * Other wikis on this site, can be administered from a single developer
724 * Array numeric key => database name
726 $wgLocalDatabases = array();
729 * Object cache settings
730 * See Defines.php for types
732 $wgMainCacheType = CACHE_NONE
;
733 $wgMessageCacheType = CACHE_ANYTHING
;
734 $wgParserCacheType = CACHE_ANYTHING
;
737 $wgParserCacheExpireTime = 86400;
739 $wgSessionsInMemcached = false;
741 /** This is used for setting php's session.save_handler. In practice, you will
742 * almost never need to change this ever. Other options might be 'user' or
743 * 'session_mysql.' Setting to null skips setting this entirely (which might be
744 * useful if you're doing cross-application sessions, see bug 11381) */
745 $wgSessionHandler = 'files';
748 * Memcached-specific settings
749 * See docs/memcached.txt
751 $wgUseMemCached = false;
752 $wgMemCachedDebug = false; ///< Will be set to false in Setup.php, if the server isn't working
753 $wgMemCachedServers = array( '127.0.0.1:11000' );
754 $wgMemCachedPersistent = false;
758 * Directory for local copy of message cache, for use in addition to memcached
760 $wgLocalMessageCache = false;
762 * Defines format of local cache
763 * true - Serialized object
764 * false - PHP source file (Warning - security risk)
766 $wgLocalMessageCacheSerialized = true;
770 /** Site language code, should be one of ./languages/Language(.*).php */
771 $wgLanguageCode = 'en';
774 * Some languages need different word forms, usually for different cases.
775 * Used in Language::convertGrammar().
777 $wgGrammarForms = array();
778 #$wgGrammarForms['en']['genitive']['car'] = 'car\'s';
780 /** Treat language links as magic connectors, not inline links */
781 $wgInterwikiMagic = true;
783 /** Hide interlanguage links from the sidebar */
784 $wgHideInterlanguageLinks = false;
786 /** List of language names or overrides for default names in Names.php */
787 $wgExtraLanguageNames = array();
789 /** We speak UTF-8 all the time now, unless some oddities happen */
790 $wgInputEncoding = 'UTF-8';
791 $wgOutputEncoding = 'UTF-8';
792 $wgEditEncoding = '';
795 * Locale for LC_CTYPE, to work around http://bugs.php.net/bug.php?id=45132
796 * For Unix-like operating systems, set this to to a locale that has a UTF-8
797 * character set. Only the character set is relevant.
799 $wgShellLocale = 'en_US.utf8';
802 * Set this to eg 'ISO-8859-1' to perform character set
803 * conversion when loading old revisions not marked with
804 * "utf-8" flag. Use this when converting wiki to UTF-8
805 * without the burdensome mass conversion of old text data.
807 * NOTE! This DOES NOT touch any fields other than old_text.
808 * Titles, comments, user names, etc still must be converted
809 * en masse in the database before continuing as a UTF-8 wiki.
811 $wgLegacyEncoding = false;
814 * If set to true, the MediaWiki 1.4 to 1.5 schema conversion will
815 * create stub reference rows in the text table instead of copying
816 * the full text of all current entries from 'cur' to 'text'.
818 * This will speed up the conversion step for large sites, but
819 * requires that the cur table be kept around for those revisions
820 * to remain viewable.
822 * maintenance/migrateCurStubs.php can be used to complete the
823 * migration in the background once the wiki is back online.
825 * This option affects the updaters *only*. Any present cur stub
826 * revisions will be readable at runtime regardless of this setting.
828 $wgLegacySchemaConversion = false;
830 $wgMimeType = 'text/html';
831 $wgJsMimeType = 'text/javascript';
832 $wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN';
833 $wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
834 $wgXhtmlDefaultNamespace = 'http://www.w3.org/1999/xhtml';
837 * Permit other namespaces in addition to the w3.org default.
838 * Use the prefix for the key and the namespace for the value. For
840 * $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg';
841 * Normally we wouldn't have to define this in the root <html>
842 * element, but IE needs it there in some circumstances.
844 $wgXhtmlNamespaces = array();
846 /** Enable to allow rewriting dates in page text.
847 * DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES */
848 $wgUseDynamicDates = false;
849 /** Enable dates like 'May 12' instead of '12 May', this only takes effect if
850 * the interface is set to English
852 $wgAmericanDates = false;
854 * For Hindi and Arabic use local numerals instead of Western style (0-9)
855 * numerals in interface.
857 $wgTranslateNumerals = true;
860 * Translation using MediaWiki: namespace.
861 * Interface messages will be loaded from the database.
863 $wgUseDatabaseMessages = true;
866 * Expiry time for the message cache key
868 $wgMsgCacheExpiry = 86400;
871 * Maximum entry size in the message cache, in bytes
873 $wgMaxMsgCacheEntrySize = 10000;
876 * If true, serialized versions of the messages arrays will be
877 * read from the 'serialized' subdirectory if they are present.
878 * Set to false to always use the Messages files, regardless of
879 * whether they are up to date or not.
881 $wgEnableSerializedMessages = true;
884 * Set to false if you are thorough system admin who always remembers to keep
885 * serialized files up to date to save few mtime calls.
887 $wgCheckSerialized = true;
889 /** Whether to enable language variant conversion. */
890 $wgDisableLangConversion = false;
892 /** Whether to enable language variant conversion for links. */
893 $wgDisableTitleConversion = false;
895 /** Default variant code, if false, the default will be the language code */
896 $wgDefaultLanguageVariant = false;
899 * Show a bar of language selection links in the user login and user
900 * registration forms; edit the "loginlanguagelinks" message to
903 $wgLoginLanguageSelector = false;
906 * Whether to use zhdaemon to perform Chinese text processing
907 * zhdaemon is under developement, so normally you don't want to
908 * use it unless for testing
910 $wgUseZhdaemon = false;
911 $wgZhdaemonHost="localhost";
912 $wgZhdaemonPort=2004;
915 # Miscellaneous configuration settings
918 $wgLocalInterwiki = 'w';
919 $wgInterwikiExpiry = 10800; # Expiry time for cache of interwiki table
921 /** Interwiki caching settings.
922 $wgInterwikiCache specifies path to constant database file
923 This cdb database is generated by dumpInterwiki from maintenance
924 and has such key formats:
925 dbname:key - a simple key (e.g. enwiki:meta)
926 _sitename:key - site-scope key (e.g. wiktionary:meta)
927 __global:key - global-scope key (e.g. __global:meta)
928 __sites:dbname - site mapping (e.g. __sites:enwiki)
929 Sites mapping just specifies site name, other keys provide
930 "local url" data layout.
931 $wgInterwikiScopes specify number of domains to check for messages:
932 1 - Just wiki(db)-level
933 2 - wiki and global levels
935 $wgInterwikiFallbackSite - if unable to resolve from cache
937 $wgInterwikiCache = false;
938 $wgInterwikiScopes = 3;
939 $wgInterwikiFallbackSite = 'wiki';
942 * If local interwikis are set up which allow redirects,
943 * set this regexp to restrict URLs which will be displayed
944 * as 'redirected from' links.
946 * It might look something like this:
947 * $wgRedirectSources = '!^https?://[a-z-]+\.wikipedia\.org/!';
949 * Leave at false to avoid displaying any incoming redirect markers.
950 * This does not affect intra-wiki redirects, which don't change
953 $wgRedirectSources = false;
956 $wgShowIPinHeader = true; # For non-logged in users
957 $wgMaxSigChars = 255; # Maximum number of Unicode characters in signature
958 $wgMaxArticleSize = 2048; # Maximum article size in kilobytes
959 # Maximum number of bytes in username. You want to run the maintenance
960 # script ./maintenancecheckUsernames.php once you have changed this value
961 $wgMaxNameChars = 255;
963 $wgMaxPPNodeCount = 1000000; # A complexity limit on template expansion
966 * Maximum recursion depth for templates within templates.
967 * The current parser adds two levels to the PHP call stack for each template,
968 * and xdebug limits the call stack to 100 by default. So this should hopefully
969 * stop the parser before it hits the xdebug limit.
971 $wgMaxTemplateDepth = 40;
972 $wgMaxPPExpandDepth = 40;
975 * If true, removes (substitutes) templates in "~~~~" signatures.
977 $wgCleanSignatures = true;
979 $wgExtraSubtitle = '';
980 $wgSiteSupportPage = ''; # A page where you users can receive donations
983 * Set this to a string to put the wiki into read-only mode. The text will be
984 * used as an explanation to users.
986 * This prevents most write operations via the web interface. Cache updates may
987 * still be possible. To prevent database writes completely, use the read_only
993 * If this lock file exists (size > 0), the wiki will be forced into read-only mode.
994 * Its contents will be shown to users as part of the read-only warning
997 $wgReadOnlyFile = false; ///< defaults to "{$wgUploadDirectory}/lock_yBgMBwiR";
1000 * Filename for debug logging. See http://www.mediawiki.org/wiki/How_to_debug
1001 * The debug log file should be not be publicly accessible if it is used, as it
1002 * may contain private data.
1004 $wgDebugLogFile = '';
1007 * Prefix for debug log lines
1009 $wgDebugLogPrefix = '';
1012 * If true, instead of redirecting, show a page with a link to the redirect
1013 * destination. This allows for the inspection of PHP error messages, and easy
1014 * resubmission of form data. For developer use only.
1016 $wgDebugRedirects = false;
1019 * If true, log debugging data from action=raw.
1020 * This is normally false to avoid overlapping debug entries due to gen=css and
1023 $wgDebugRawPage = false;
1026 * Send debug data to an HTML comment in the output.
1028 * This may occasionally be useful when supporting a non-technical end-user. It's
1029 * more secure than exposing the debug log file to the web, since the output only
1030 * contains private data for the current user. But it's not ideal for development
1031 * use since data is lost on fatal errors and redirects.
1033 $wgDebugComments = false;
1035 /** Does nothing. Obsolete? */
1036 $wgLogQueries = false;
1039 * Write SQL queries to the debug log
1041 $wgDebugDumpSql = false;
1044 * Set to an array of log group keys to filenames.
1045 * If set, wfDebugLog() output for that group will go to that file instead
1046 * of the regular $wgDebugLogFile. Useful for enabling selective logging
1049 $wgDebugLogGroups = array();
1052 * Display debug data at the bottom of the main content area.
1054 * Useful for developers and technical users trying to working on a closed wiki.
1056 $wgShowDebug = false;
1059 * Show the contents of $wgHooks in Special:Version
1061 $wgSpecialVersionShowHooks = false;
1064 * Whether to show "we're sorry, but there has been a database error" pages.
1065 * Displaying errors aids in debugging, but may display information useful
1068 $wgShowSQLErrors = false;
1071 * If true, some error messages will be colorized when running scripts on the
1072 * command line; this can aid picking important things out when debugging.
1073 * Ignored when running on Windows or when output is redirected to a file.
1075 $wgColorErrors = true;
1078 * If set to true, uncaught exceptions will print a complete stack trace
1079 * to output. This should only be used for debugging, as it may reveal
1080 * private information in function parameters due to PHP's backtrace
1083 $wgShowExceptionDetails = false;
1086 * Expose backend server host names through the API and various HTML comments
1088 $wgShowHostnames = false;
1091 * If set to true MediaWiki will throw notices for some possible error
1092 * conditions and for deprecated functions.
1094 $wgDevelopmentWarnings = false;
1097 * Use experimental, DMOZ-like category browser
1099 $wgUseCategoryBrowser = false;
1102 * Keep parsed pages in a cache (objectcache table, turck, or memcached)
1103 * to speed up output of the same page viewed by another user with the
1106 * This can provide a significant speedup for medium to large pages,
1107 * so you probably want to keep it on. Extensions that conflict with the
1108 * parser cache should disable the cache on a per-page basis instead.
1110 $wgEnableParserCache = true;
1113 * Append a configured value to the parser cache and the sitenotice key so
1114 * that they can be kept separate for some class of activity.
1116 $wgRenderHashAppend = '';
1119 * If on, the sidebar navigation links are cached for users with the
1120 * current language set. This can save a touch of load on a busy site
1121 * by shaving off extra message lookups.
1123 * However it is also fragile: changing the site configuration, or
1124 * having a variable $wgArticlePath, can produce broken links that
1125 * don't update as expected.
1127 $wgEnableSidebarCache = false;
1130 * Expiry time for the sidebar cache, in seconds
1132 $wgSidebarCacheExpiry = 86400;
1135 * Under which condition should a page in the main namespace be counted
1136 * as a valid article? If $wgUseCommaCount is set to true, it will be
1137 * counted if it contains at least one comma. If it is set to false
1138 * (default), it will only be counted if it contains at least one [[wiki
1139 * link]]. See http://meta.wikimedia.org/wiki/Help:Article_count
1141 * Retroactively changing this variable will not affect
1142 * the existing count (cf. maintenance/recount.sql).
1144 $wgUseCommaCount = false;
1147 * wgHitcounterUpdateFreq sets how often page counters should be updated, higher
1148 * values are easier on the database. A value of 1 causes the counters to be
1149 * updated on every hit, any higher value n cause them to update *on average*
1150 * every n hits. Should be set to either 1 or something largish, eg 1000, for
1151 * maximum efficiency.
1153 $wgHitcounterUpdateFreq = 1;
1155 # Basic user rights and block settings
1156 $wgSysopUserBans = true; # Allow sysops to ban logged-in users
1157 $wgSysopRangeBans = true; # Allow sysops to ban IP ranges
1158 $wgAutoblockExpiry = 86400; # Number of seconds before autoblock entries expire
1159 $wgBlockAllowsUTEdit = false; # Default setting for option on block form to allow self talkpage editing whilst blocked
1160 $wgSysopEmailBans = true; # Allow sysops to ban users from accessing Emailuser
1162 # Pages anonymous user may see as an array, e.g.:
1163 # array ( "Main Page", "Wikipedia:Help");
1164 # Special:Userlogin and Special:Resetpass are always whitelisted.
1165 # NOTE: This will only work if $wgGroupPermissions['*']['read']
1166 # is false -- see below. Otherwise, ALL pages are accessible,
1167 # regardless of this setting.
1168 # Also note that this will only protect _pages in the wiki_.
1169 # Uploaded files will remain readable. Make your upload
1170 # directory name unguessable, or use .htaccess to protect it.
1171 $wgWhitelistRead = false;
1174 * Should editors be required to have a validated e-mail
1175 * address before being allowed to edit?
1177 $wgEmailConfirmToEdit=false;
1180 * Permission keys given to users in each group.
1181 * All users are implicitly in the '*' group including anonymous visitors;
1182 * logged-in users are all implicitly in the 'user' group. These will be
1183 * combined with the permissions of all groups that a given user is listed
1184 * in in the user_groups table.
1186 * Note: Don't set $wgGroupPermissions = array(); unless you know what you're
1187 * doing! This will wipe all permissions, and may mean that your users are
1188 * unable to perform certain essential tasks or access new functionality
1189 * when new permissions are introduced and default grants established.
1191 * Functionality to make pages inaccessible has not been extensively tested
1192 * for security. Use at your own risk!
1194 * This replaces wgWhitelistAccount and wgWhitelistEdit
1196 $wgGroupPermissions = array();
1198 // Implicit group for all visitors
1199 $wgGroupPermissions['*']['createaccount'] = true;
1200 $wgGroupPermissions['*']['read'] = true;
1201 $wgGroupPermissions['*']['edit'] = true;
1202 $wgGroupPermissions['*']['createpage'] = true;
1203 $wgGroupPermissions['*']['createtalk'] = true;
1204 $wgGroupPermissions['*']['writeapi'] = true;
1205 //$wgGroupPermissions['*']['patrolmarks'] = false; // let anons see what was patrolled
1207 // Implicit group for all logged-in accounts
1208 $wgGroupPermissions['user']['move'] = true;
1209 $wgGroupPermissions['user']['move-subpages'] = true;
1210 $wgGroupPermissions['user']['move-rootuserpages'] = true; // can move root userpages
1211 //$wgGroupPermissions['user']['movefile'] = true; // Disabled for now due to possible bugs and security concerns
1212 $wgGroupPermissions['user']['read'] = true;
1213 $wgGroupPermissions['user']['edit'] = true;
1214 $wgGroupPermissions['user']['createpage'] = true;
1215 $wgGroupPermissions['user']['createtalk'] = true;
1216 $wgGroupPermissions['user']['writeapi'] = true;
1217 $wgGroupPermissions['user']['upload'] = true;
1218 $wgGroupPermissions['user']['reupload'] = true;
1219 $wgGroupPermissions['user']['reupload-shared'] = true;
1220 $wgGroupPermissions['user']['minoredit'] = true;
1221 $wgGroupPermissions['user']['purge'] = true; // can use ?action=purge without clicking "ok"
1223 // Implicit group for accounts that pass $wgAutoConfirmAge
1224 $wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true;
1226 // Users with bot privilege can have their edits hidden
1227 // from various log pages by default
1228 $wgGroupPermissions['bot']['bot'] = true;
1229 $wgGroupPermissions['bot']['autoconfirmed'] = true;
1230 $wgGroupPermissions['bot']['nominornewtalk'] = true;
1231 $wgGroupPermissions['bot']['autopatrol'] = true;
1232 $wgGroupPermissions['bot']['suppressredirect'] = true;
1233 $wgGroupPermissions['bot']['apihighlimits'] = true;
1234 $wgGroupPermissions['bot']['writeapi'] = true;
1235 #$wgGroupPermissions['bot']['editprotected'] = true; // can edit all protected pages without cascade protection enabled
1237 // Most extra permission abilities go to this group
1238 $wgGroupPermissions['sysop']['block'] = true;
1239 $wgGroupPermissions['sysop']['createaccount'] = true;
1240 $wgGroupPermissions['sysop']['delete'] = true;
1241 $wgGroupPermissions['sysop']['bigdelete'] = true; // can be separately configured for pages with > $wgDeleteRevisionsLimit revs
1242 $wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text
1243 $wgGroupPermissions['sysop']['undelete'] = true;
1244 $wgGroupPermissions['sysop']['editinterface'] = true;
1245 $wgGroupPermissions['sysop']['editusercssjs'] = true;
1246 $wgGroupPermissions['sysop']['import'] = true;
1247 $wgGroupPermissions['sysop']['importupload'] = true;
1248 $wgGroupPermissions['sysop']['move'] = true;
1249 $wgGroupPermissions['sysop']['move-subpages'] = true;
1250 $wgGroupPermissions['sysop']['move-rootuserpages'] = true;
1251 $wgGroupPermissions['sysop']['patrol'] = true;
1252 $wgGroupPermissions['sysop']['autopatrol'] = true;
1253 $wgGroupPermissions['sysop']['protect'] = true;
1254 $wgGroupPermissions['sysop']['proxyunbannable'] = true;
1255 $wgGroupPermissions['sysop']['rollback'] = true;
1256 $wgGroupPermissions['sysop']['trackback'] = true;
1257 $wgGroupPermissions['sysop']['upload'] = true;
1258 $wgGroupPermissions['sysop']['reupload'] = true;
1259 $wgGroupPermissions['sysop']['reupload-shared'] = true;
1260 $wgGroupPermissions['sysop']['unwatchedpages'] = true;
1261 $wgGroupPermissions['sysop']['autoconfirmed'] = true;
1262 $wgGroupPermissions['sysop']['upload_by_url'] = true;
1263 $wgGroupPermissions['sysop']['ipblock-exempt'] = true;
1264 $wgGroupPermissions['sysop']['blockemail'] = true;
1265 $wgGroupPermissions['sysop']['markbotedits'] = true;
1266 $wgGroupPermissions['sysop']['apihighlimits'] = true;
1267 $wgGroupPermissions['sysop']['browsearchive'] = true;
1268 $wgGroupPermissions['sysop']['noratelimit'] = true;
1269 $wgGroupPermissions['sysop']['movefile'] = true;
1270 #$wgGroupPermissions['sysop']['mergehistory'] = true;
1272 // Permission to change users' group assignments
1273 $wgGroupPermissions['bureaucrat']['userrights'] = true;
1274 $wgGroupPermissions['bureaucrat']['noratelimit'] = true;
1275 // Permission to change users' groups assignments across wikis
1276 #$wgGroupPermissions['bureaucrat']['userrights-interwiki'] = true;
1277 // Permission to export pages including linked pages regardless of $wgExportMaxLinkDepth
1278 #$wgGroupPermissions['bureaucrat']['override-export-depth'] = true;
1280 #$wgGroupPermissions['sysop']['deleterevision'] = true;
1281 // To hide usernames from users and Sysops
1282 #$wgGroupPermissions['suppress']['hideuser'] = true;
1283 // To hide revisions/log items from users and Sysops
1284 #$wgGroupPermissions['suppress']['suppressrevision'] = true;
1285 // For private suppression log access
1286 #$wgGroupPermissions['suppress']['suppressionlog'] = true;
1289 * The developer group is deprecated, but can be activated if need be
1290 * to use the 'lockdb' and 'unlockdb' special pages. Those require
1291 * that a lock file be defined and creatable/removable by the web
1294 # $wgGroupPermissions['developer']['siteadmin'] = true;
1298 * Implicit groups, aren't shown on Special:Listusers or somewhere else
1300 $wgImplicitGroups = array( '*', 'user', 'autoconfirmed' );
1303 * A map of group names that the user is in, to group names that those users
1304 * are allowed to add or revoke.
1306 * Setting the list of groups to add or revoke to true is equivalent to "any group".
1308 * For example, to allow sysops to add themselves to the "bot" group:
1310 * $wgGroupsAddToSelf = array( 'sysop' => array( 'bot' ) );
1312 * Implicit groups may be used for the source group, for instance:
1314 * $wgGroupsRemoveFromSelf = array( '*' => true );
1316 * This allows users in the '*' group (i.e. any user) to remove themselves from
1317 * any group that they happen to be in.
1320 $wgGroupsAddToSelf = array();
1321 $wgGroupsRemoveFromSelf = array();
1324 * Set of available actions that can be restricted via action=protect
1325 * You probably shouldn't change this.
1326 * Translated through restriction-* messages.
1328 $wgRestrictionTypes = array( 'edit', 'move' );
1331 * Rights which can be required for each protection level (via action=protect)
1333 * You can add a new protection level that requires a specific
1334 * permission by manipulating this array. The ordering of elements
1335 * dictates the order on the protection form's lists.
1337 * '' will be ignored (i.e. unprotected)
1338 * 'sysop' is quietly rewritten to 'protect' for backwards compatibility
1340 $wgRestrictionLevels = array( '', 'autoconfirmed', 'sysop' );
1343 * Set the minimum permissions required to edit pages in each
1344 * namespace. If you list more than one permission, a user must
1345 * have all of them to edit pages in that namespace.
1347 * Note: NS_MEDIAWIKI is implicitly restricted to editinterface.
1349 $wgNamespaceProtection = array();
1352 * Pages in namespaces in this array can not be used as templates.
1353 * Elements must be numeric namespace ids.
1354 * Among other things, this may be useful to enforce read-restrictions
1355 * which may otherwise be bypassed by using the template machanism.
1357 $wgNonincludableNamespaces = array();
1360 * Number of seconds an account is required to age before
1361 * it's given the implicit 'autoconfirm' group membership.
1362 * This can be used to limit privileges of new accounts.
1364 * Accounts created by earlier versions of the software
1365 * may not have a recorded creation date, and will always
1366 * be considered to pass the age test.
1368 * When left at 0, all registered accounts will pass.
1370 $wgAutoConfirmAge = 0;
1371 //$wgAutoConfirmAge = 600; // ten minutes
1372 //$wgAutoConfirmAge = 3600*24; // one day
1374 # Number of edits an account requires before it is autoconfirmed
1375 # Passing both this AND the time requirement is needed
1376 $wgAutoConfirmCount = 0;
1377 //$wgAutoConfirmCount = 50;
1380 * Automatically add a usergroup to any user who matches certain conditions.
1382 * array( '&' or '|' or '^', cond1, cond2, ... )
1383 * where cond1, cond2, ... are themselves conditions; *OR*
1384 * APCOND_EMAILCONFIRMED, *OR*
1385 * array( APCOND_EMAILCONFIRMED ), *OR*
1386 * array( APCOND_EDITCOUNT, number of edits ), *OR*
1387 * array( APCOND_AGE, seconds since registration ), *OR*
1388 * array( APCOND_INGROUPS, group1, group2, ... ), *OR*
1389 * array( APCOND_ISIP, ip ), *OR*
1390 * array( APCOND_IPINRANGE, range ), *OR*
1391 * array( APCOND_AGE_FROM_EDIT, seconds since first edit ), *OR*
1392 * similar constructs defined by extensions.
1394 * If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any
1395 * user who has provided an e-mail address.
1397 $wgAutopromote = array(
1398 'autoconfirmed' => array( '&',
1399 array( APCOND_EDITCOUNT
, &$wgAutoConfirmCount ),
1400 array( APCOND_AGE
, &$wgAutoConfirmAge ),
1405 * These settings can be used to give finer control over who can assign which
1406 * groups at Special:Userrights. Example configuration:
1408 * // Bureaucrat can add any group
1409 * $wgAddGroups['bureaucrat'] = true;
1410 * // Bureaucrats can only remove bots and sysops
1411 * $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' );
1412 * // Sysops can make bots
1413 * $wgAddGroups['sysop'] = array( 'bot' );
1414 * // Sysops can disable other sysops in an emergency, and disable bots
1415 * $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' );
1417 $wgAddGroups = array();
1418 $wgRemoveGroups = array();
1421 * A list of available rights, in addition to the ones defined by the core.
1422 * For extensions only.
1424 $wgAvailableRights = array();
1427 * Optional to restrict deletion of pages with higher revision counts
1428 * to users with the 'bigdelete' permission. (Default given to sysops.)
1430 $wgDeleteRevisionsLimit = 0;
1433 * Used to figure out if a user is "active" or not. User::isActiveEditor()
1434 * sees if a user has made at least $wgActiveUserEditCount number of edits
1435 * within the last $wgActiveUserDays days.
1437 $wgActiveUserEditCount = 30;
1438 $wgActiveUserDays = 30;
1440 # Proxy scanner settings
1444 * If you enable this, every editor's IP address will be scanned for open HTTP
1447 * Don't enable this. Many sysops will report "hostile TCP port scans" to your
1448 * ISP and ask for your server to be shut down.
1450 * You have been warned.
1452 $wgBlockOpenProxies = false;
1453 /** Port we want to scan for a proxy */
1454 $wgProxyPorts = array( 80, 81, 1080, 3128, 6588, 8000, 8080, 8888, 65506 );
1455 /** Script used to scan */
1456 $wgProxyScriptPath = "$IP/includes/proxy_check.php";
1458 $wgProxyMemcExpiry = 86400;
1459 /** This should always be customised in LocalSettings.php */
1460 $wgSecretKey = false;
1461 /** big list of banned IP addresses, in the keys not the values */
1462 $wgProxyList = array();
1464 $wgProxyKey = false;
1466 /** Number of accounts each IP address may create, 0 to disable.
1467 * Requires memcached */
1468 $wgAccountCreationThrottle = 0;
1470 # Client-side caching:
1472 /** Allow client-side caching of pages */
1473 $wgCachePages = true;
1476 * Set this to current time to invalidate all prior cached pages. Affects both
1477 * client- and server-side caching.
1478 * You can get the current date on your server by using the command:
1479 * date +%Y%m%d%H%M%S
1481 $wgCacheEpoch = '20030516000000';
1484 * Bump this number when changing the global style sheets and JavaScript.
1485 * It should be appended in the query string of static CSS and JS includes,
1486 * to ensure that client-side caches do not keep obsolete copies of global
1489 $wgStyleVersion = '224';
1492 # Server-side caching:
1495 * This will cache static pages for non-logged-in users to reduce
1496 * database traffic on public sites.
1497 * Must set $wgShowIPinHeader = false
1499 $wgUseFileCache = false;
1501 /** Directory where the cached page will be saved */
1502 $wgFileCacheDirectory = false; ///< defaults to "{$wgUploadDirectory}/cache";
1505 * When using the file cache, we can store the cached HTML gzipped to save disk
1506 * space. Pages will then also be served compressed to clients that support it.
1507 * THIS IS NOT COMPATIBLE with ob_gzhandler which is now enabled if supported in
1508 * the default LocalSettings.php! If you enable this, remove that setting first.
1510 * Requires zlib support enabled in PHP.
1514 /** Whether MediaWiki should send an ETag header */
1517 # Email notification settings
1520 /** For email notification on page changes */
1521 $wgPasswordSender = $wgEmergencyContact;
1523 # true: from page editor if s/he opted-in
1524 # false: Enotif mails appear to come from $wgEmergencyContact
1525 $wgEnotifFromEditor = false;
1527 // TODO move UPO to preferences probably ?
1528 # If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion
1529 # If set to false, the corresponding input form on the user preference page is suppressed
1530 # It call this to be a "user-preferences-option (UPO)"
1531 $wgEmailAuthentication = true; # UPO (if this is set to false, texts referring to authentication are suppressed)
1532 $wgEnotifWatchlist = false; # UPO
1533 $wgEnotifUserTalk = false; # UPO
1534 $wgEnotifRevealEditorAddress = false; # UPO; reply-to address may be filled with page editor's address (if user allowed this in the preferences)
1535 $wgEnotifMinorEdits = true; # UPO; false: "minor edits" on pages do not trigger notification mails.
1536 # # Attention: _every_ change on a user_talk page trigger a notification mail (if the user is not yet notified)
1538 # Send a generic mail instead of a personalised mail for each user. This
1539 # always uses UTC as the time zone, and doesn't include the username.
1541 # For pages with many users watching, this can significantly reduce mail load.
1542 # Has no effect when using sendmail rather than SMTP;
1544 $wgEnotifImpersonal = false;
1546 # Maximum number of users to mail at once when using impersonal mail. Should
1547 # match the limit on your mail server.
1548 $wgEnotifMaxRecips = 500;
1550 # Send mails via the job queue.
1551 $wgEnotifUseJobQ = false;
1553 # Use real name instead of username in e-mail "from" field
1554 $wgEnotifUseRealName = false;
1557 * Array of usernames who will be sent a notification email for every change which occurs on a wiki
1559 $wgUsersNotifiedOnAllChanges = array();
1561 /** Show watching users in recent changes, watchlist and page history views */
1562 $wgRCShowWatchingUsers = false; # UPO
1563 /** Show watching users in Page views */
1564 $wgPageShowWatchingUsers = false;
1565 /** Show the amount of changed characters in recent changes */
1566 $wgRCShowChangedSize = true;
1569 * If the difference between the character counts of the text
1570 * before and after the edit is below that value, the value will be
1571 * highlighted on the RC page.
1573 $wgRCChangedSizeThreshold = 500;
1576 * Show "Updated (since my last visit)" marker in RC view, watchlist and history
1577 * view for watched pages with new changes */
1578 $wgShowUpdatedMarker = true;
1581 * Default cookie expiration time. Setting to 0 makes all cookies session-only.
1583 $wgCookieExpiration = 30*86400;
1585 /** Clock skew or the one-second resolution of time() can occasionally cause cache
1586 * problems when the user requests two pages within a short period of time. This
1587 * variable adds a given number of seconds to vulnerable timestamps, thereby giving
1590 $wgClockSkewFudge = 5;
1592 # Squid-related settings
1595 /** Enable/disable Squid */
1596 $wgUseSquid = false;
1598 /** If you run Squid3 with ESI support, enable this (default:false): */
1601 /** Internal server name as known to Squid, if different */
1602 # $wgInternalServer = 'http://yourinternal.tld:8000';
1603 $wgInternalServer = $wgServer;
1606 * Cache timeout for the squid, will be sent as s-maxage (without ESI) or
1607 * Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in
1608 * the Squid config. 18000 seconds = 5 hours, more cache hits with 2678400 = 31
1611 $wgSquidMaxage = 18000;
1614 * Default maximum age for raw CSS/JS accesses
1616 $wgForcedRawSMaxage = 300;
1619 * List of proxy servers to purge on changes; default port is 80. Use IP addresses.
1621 * When MediaWiki is running behind a proxy, it will trust X-Forwarded-For
1622 * headers sent/modified from these proxies when obtaining the remote IP address
1624 * For a list of trusted servers which *aren't* purged, see $wgSquidServersNoPurge.
1626 $wgSquidServers = array();
1629 * As above, except these servers aren't purged on page changes; use to set a
1630 * list of trusted proxies, etc.
1632 $wgSquidServersNoPurge = array();
1634 /** Maximum number of titles to purge in any one client operation */
1635 $wgMaxSquidPurgeTitles = 400;
1637 /** HTCP multicast purging */
1639 $wgHTCPMulticastTTL = 1;
1640 # $wgHTCPMulticastAddress = "224.0.0.85";
1641 $wgHTCPMulticastAddress = false;
1643 /** Should forwarded Private IPs be accepted? */
1644 $wgUsePrivateIPs = false;
1649 * Set to set an explicit domain on the login cookies eg, "justthis.domain. org"
1650 * or ".any.subdomain.net"
1652 $wgCookieDomain = '';
1653 $wgCookiePath = '/';
1654 $wgCookieSecure = ($wgProto == 'https');
1655 $wgDisableCookieCheck = false;
1658 * Set $wgCookiePrefix to use a custom one. Setting to false sets the default of
1659 * using the database name.
1661 $wgCookiePrefix = false;
1664 * Set authentication cookies to HttpOnly to prevent access by JavaScript,
1665 * in browsers that support this feature. This can mitigates some classes of
1668 * Only supported on PHP 5.2 or higher.
1670 $wgCookieHttpOnly = version_compare("5.2", PHP_VERSION
, "<");
1673 * If the requesting browser matches a regex in this blacklist, we won't
1674 * send it cookies with HttpOnly mode, even if $wgCookieHttpOnly is on.
1676 $wgHttpOnlyBlacklist = array(
1677 // Internet Explorer for Mac; sometimes the cookies work, sometimes
1678 // they don't. It's difficult to predict, as combinations of path
1679 // and expiration options affect its parsing.
1680 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
1683 /** A list of cookies that vary the cache (for use by extensions) */
1684 $wgCacheVaryCookies = array();
1686 /** Override to customise the session name */
1687 $wgSessionName = false;
1689 /** Whether to allow inline image pointing to other websites */
1690 $wgAllowExternalImages = false;
1692 /** If the above is false, you can specify an exception here. Image URLs
1693 * that start with this string are then rendered, while all others are not.
1694 * You can use this to set up a trusted, simple repository of images.
1695 * You may also specify an array of strings to allow multiple sites
1698 * $wgAllowExternalImagesFrom = 'http://127.0.0.1/';
1699 * $wgAllowExternalImagesFrom = array( 'http://127.0.0.1/', 'http://example.com' );
1701 $wgAllowExternalImagesFrom = '';
1703 /** If $wgAllowExternalImages is false, you can allow an on-wiki
1704 * whitelist of regular expression fragments to match the image URL
1705 * against. If the image matches one of the regular expression fragments,
1706 * The image will be displayed.
1708 * Set this to true to enable the on-wiki whitelist (MediaWiki:External image whitelist)
1709 * Or false to disable it
1711 $wgEnableImageWhitelist = true;
1713 /** Allows to move images and other media files */
1714 $wgAllowImageMoving = true;
1716 /** Disable database-intensive features */
1717 $wgMiserMode = false;
1718 /** Disable all query pages if miser mode is on, not just some */
1719 $wgDisableQueryPages = false;
1720 /** Number of rows to cache in 'querycache' table when miser mode is on */
1721 $wgQueryCacheLimit = 1000;
1722 /** Number of links to a page required before it is deemed "wanted" */
1723 $wgWantedPagesThreshold = 1;
1724 /** Enable slow parser functions */
1725 $wgAllowSlowParserFunctions = false;
1728 * Maps jobs to their handling classes; extensions
1729 * can add to this to provide custom jobs
1731 $wgJobClasses = array(
1732 'refreshLinks' => 'RefreshLinksJob',
1733 'refreshLinks2' => 'RefreshLinksJob2',
1734 'htmlCacheUpdate' => 'HTMLCacheUpdateJob',
1735 'html_cache_update' => 'HTMLCacheUpdateJob', // backwards-compatible
1736 'sendMail' => 'EmaillingJob',
1737 'enotifNotify' => 'EnotifNotifyJob',
1738 'fixDoubleRedirect' => 'DoubleRedirectJob',
1742 * Additional functions to be performed with updateSpecialPages.
1743 * Expensive Querypages are already updated.
1745 $wgSpecialPageCacheUpdates = array(
1746 'Statistics' => array('SiteStatsUpdate','cacheUpdate')
1750 * To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory of
1751 * the MediaWiki package and have latex, dvips, gs (ghostscript), andconvert
1752 * (ImageMagick) installed and available in the PATH.
1753 * Please see math/README for more information.
1756 /** Location of the texvc binary */
1757 $wgTexvc = './math/texvc';
1760 # Profiling / debugging
1762 # You have to create a 'profiling' table in your database before using
1763 # profiling see maintenance/archives/patch-profiling.sql .
1765 # To enable profiling, edit StartProfiler.php
1767 /** Only record profiling info for pages that took longer than this */
1768 $wgProfileLimit = 0.0;
1769 /** Don't put non-profiling info into log file */
1770 $wgProfileOnly = false;
1771 /** Log sums from profiling into "profiling" table in db. */
1772 $wgProfileToDatabase = false;
1773 /** If true, print a raw call tree instead of per-function report */
1774 $wgProfileCallTree = false;
1775 /** Should application server host be put into profiling table */
1776 $wgProfilePerHost = false;
1778 /** Settings for UDP profiler */
1779 $wgUDPProfilerHost = '127.0.0.1';
1780 $wgUDPProfilerPort = '3811';
1782 /** Detects non-matching wfProfileIn/wfProfileOut calls */
1783 $wgDebugProfiling = false;
1784 /** Output debug message on every wfProfileIn/wfProfileOut */
1785 $wgDebugFunctionEntry = 0;
1786 /** Lots of debugging output from SquidUpdate.php */
1787 $wgDebugSquid = false;
1790 * Destination for wfIncrStats() data...
1791 * 'cache' to go into the system cache, if enabled (memcached)
1792 * 'udp' to be sent to the UDP profiler (see $wgUDPProfilerHost)
1795 $wgStatsMethod = 'cache';
1797 /** Whereas to count the number of time an article is viewed.
1798 * Does not work if pages are cached (for example with squid).
1800 $wgDisableCounters = false;
1802 $wgDisableTextSearch = false;
1803 $wgDisableSearchContext = false;
1807 * Set to true to have nicer highligted text in search results,
1808 * by default off due to execution overhead
1810 $wgAdvancedSearchHighlighting = false;
1813 * Regexp to match word boundaries, defaults for non-CJK languages
1814 * should be empty for CJK since the words are not separate
1816 $wgSearchHighlightBoundaries = version_compare("5.1", PHP_VERSION
, "<")?
'[\p{Z}\p{P}\p{C}]'
1817 : '[ ,.;:!?~!@#$%\^&*\(\)+=\-\\|\[\]"\'<>\n\r\/{}]'; // PHP 5.0 workaround
1820 * Template for OpenSearch suggestions, defaults to API action=opensearch
1822 * Sites with heavy load would tipically have these point to a custom
1823 * PHP wrapper to avoid firing up mediawiki for every keystroke
1825 * Placeholders: {searchTerms}
1828 $wgOpenSearchTemplate = false;
1831 * Enable suggestions while typing in search boxes
1832 * (results are passed around in OpenSearch format)
1834 $wgEnableMWSuggest = false;
1837 * Template for internal MediaWiki suggestion engine, defaults to API action=opensearch
1839 * Placeholders: {searchTerms}, {namespaces}, {dbname}
1842 $wgMWSuggestTemplate = false;
1845 * If you've disabled search semi-permanently, this also disables updates to the
1846 * table. If you ever re-enable, be sure to rebuild the search table.
1848 $wgDisableSearchUpdate = false;
1849 /** Uploads have to be specially set up to be secure */
1850 $wgEnableUploads = false;
1852 * Show EXIF data, on by default if available.
1853 * Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php
1855 * NOTE FOR WINDOWS USERS:
1856 * To enable EXIF functions, add the folloing lines to the
1857 * "Windows extensions" section of php.ini:
1859 * extension=extensions/php_mbstring.dll
1860 * extension=extensions/php_exif.dll
1862 $wgShowEXIF = function_exists( 'exif_read_data' );
1865 * Set to true to enable the upload _link_ while local uploads are disabled.
1866 * Assumes that the special page link will be bounced to another server where
1869 $wgRemoteUploads = false;
1872 * Disable links to talk pages of anonymous users (IPs) in listings on special
1873 * pages like page history, Special:Recentchanges, etc.
1875 $wgDisableAnonTalk = false;
1878 * Do DELETE/INSERT for link updates instead of incremental
1880 $wgUseDumbLinkUpdate = false;
1883 * Anti-lock flags - bitfield
1885 * Preload links during link update for save
1886 * ALF_PRELOAD_EXISTENCE
1887 * Preload cur_id during replaceLinkHolders
1889 * Don't use locking reads when updating the link table. This is
1890 * necessary for wikis with a high edit rate for performance
1891 * reasons, but may cause link table inconsistency
1893 * As for ALF_LINK_LOCK, this flag is a necessity for high-traffic
1896 $wgAntiLockFlags = 0;
1899 * Path to the GNU diff3 utility. If the file doesn't exist, edit conflicts will
1900 * fall back to the old behaviour (no merging).
1902 $wgDiff3 = '/usr/bin/diff3';
1905 * Path to the GNU diff utility.
1907 $wgDiff = '/usr/bin/diff';
1910 * We can also compress text stored in the 'text' table. If this is set on, new
1911 * revisions will be compressed on page save if zlib support is available. Any
1912 * compressed revisions will be decompressed on load regardless of this setting
1913 * *but will not be readable at all* if zlib support is not available.
1915 $wgCompressRevisions = false;
1918 * This is the list of preferred extensions for uploading files. Uploading files
1919 * with extensions not in this list will trigger a warning.
1921 $wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg' );
1923 /** Files with these extensions will never be allowed as uploads. */
1924 $wgFileBlacklist = array(
1925 # HTML may contain cookie-stealing JavaScript and web bugs
1926 'html', 'htm', 'js', 'jsb', 'mhtml', 'mht',
1927 # PHP scripts may execute arbitrary code on the server
1928 'php', 'phtml', 'php3', 'php4', 'php5', 'phps',
1929 # Other types that may be interpreted by some servers
1930 'shtml', 'jhtml', 'pl', 'py', 'cgi',
1931 # May contain harmful executables for Windows victims
1932 'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' );
1934 /** Files with these mime types will never be allowed as uploads
1935 * if $wgVerifyMimeType is enabled.
1937 $wgMimeTypeBlacklist= array(
1938 # HTML may contain cookie-stealing JavaScript and web bugs
1939 'text/html', 'text/javascript', 'text/x-javascript', 'application/x-shellscript',
1940 # PHP scripts may execute arbitrary code on the server
1941 'application/x-php', 'text/x-php',
1942 # Other types that may be interpreted by some servers
1943 'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh',
1944 # Client-side hazards on Internet Explorer
1945 'text/scriptlet', 'application/x-msdownload',
1946 # Windows metafile, client-side vulnerability on some systems
1947 'application/x-msmetafile',
1948 # A ZIP file may be a valid Java archive containing an applet which exploits the
1949 # same-origin policy to steal cookies
1953 /** This is a flag to determine whether or not to check file extensions on upload. */
1954 $wgCheckFileExtensions = true;
1957 * If this is turned off, users may override the warning for files not covered
1958 * by $wgFileExtensions.
1960 $wgStrictFileExtensions = true;
1962 /** Warn if uploaded files are larger than this (in bytes), or false to disable*/
1963 $wgUploadSizeWarning = false;
1965 /** For compatibility with old installations set to false */
1966 $wgPasswordSalt = true;
1968 /** Which namespaces should support subpages?
1969 * See Language.php for a list of namespaces.
1971 $wgNamespacesWithSubpages = array(
1974 NS_USER_TALK
=> true,
1975 NS_PROJECT_TALK
=> true,
1976 NS_FILE_TALK
=> true,
1977 NS_MEDIAWIKI
=> true,
1978 NS_MEDIAWIKI_TALK
=> true,
1979 NS_TEMPLATE_TALK
=> true,
1980 NS_HELP_TALK
=> true,
1981 NS_CATEGORY_TALK
=> true
1984 $wgNamespacesToBeSearchedDefault = array(
1989 * Namespaces to be searched when user clicks the "Help" tab
1992 * Same format as $wgNamespacesToBeSearchedDefault
1994 $wgNamespacesToBeSearchedHelp = array(
1999 $wgUseOldSearchUI = true; // temp testing variable
2002 * If set to true the 'searcheverything' preference will be effective only for logged-in users.
2003 * Useful for big wikis to maintain different search profiles for anonymous and logged-in users.
2006 $wgSearchEverythingOnlyLoggedIn = false;
2009 * Site notice shown at the top of each page
2011 * This message can contain wiki text, and can also be set through the
2012 * MediaWiki:Sitenotice page. You can also provide a separate message for
2013 * logged-out users using the MediaWiki:Anonnotice page.
2022 * Plugins for media file type handling.
2023 * Each entry in the array maps a MIME type to a class name
2025 $wgMediaHandlers = array(
2026 'image/jpeg' => 'BitmapHandler',
2027 'image/png' => 'BitmapHandler',
2028 'image/gif' => 'BitmapHandler',
2029 'image/tiff' => 'TiffHandler',
2030 'image/x-ms-bmp' => 'BmpHandler',
2031 'image/x-bmp' => 'BmpHandler',
2032 'image/svg+xml' => 'SvgHandler', // official
2033 'image/svg' => 'SvgHandler', // compat
2034 'image/vnd.djvu' => 'DjVuHandler', // official
2035 'image/x.djvu' => 'DjVuHandler', // compat
2036 'image/x-djvu' => 'DjVuHandler', // compat
2041 * Resizing can be done using PHP's internal image libraries or using
2042 * ImageMagick or another third-party converter, e.g. GraphicMagick.
2043 * These support more file formats than PHP, which only supports PNG,
2044 * GIF, JPG, XBM and WBMP.
2046 * Use Image Magick instead of PHP builtin functions.
2048 $wgUseImageMagick = false;
2049 /** The convert command shipped with ImageMagick */
2050 $wgImageMagickConvertCommand = '/usr/bin/convert';
2052 /** Sharpening parameter to ImageMagick */
2053 $wgSharpenParameter = '0x0.4';
2055 /** Reduction in linear dimensions below which sharpening will be enabled */
2056 $wgSharpenReductionThreshold = 0.85;
2059 * Temporary directory used for ImageMagick. The directory must exist. Leave
2060 * this set to false to let ImageMagick decide for itself.
2062 $wgImageMagickTempDir = false;
2065 * Use another resizing converter, e.g. GraphicMagick
2066 * %s will be replaced with the source path, %d with the destination
2067 * %w and %h will be replaced with the width and height
2069 * An example is provided for GraphicMagick
2070 * Leave as false to skip this
2072 #$wgCustomConvertCommand = "gm convert %s -resize %wx%h %d"
2073 $wgCustomConvertCommand = false;
2075 # Scalable Vector Graphics (SVG) may be uploaded as images.
2076 # Since SVG support is not yet standard in browsers, it is
2077 # necessary to rasterize SVGs to PNG as a fallback format.
2079 # An external program is required to perform this conversion:
2080 $wgSVGConverters = array(
2081 'ImageMagick' => '$path/convert -background white -thumbnail $widthx$height\! $input PNG:$output',
2082 'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
2083 'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
2084 'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input',
2085 'rsvg' => '$path/rsvg -w$width -h$height $input $output',
2086 'imgserv' => '$path/imgserv-wrapper -i svg -o png -w$width $input $output',
2088 /** Pick one of the above */
2089 $wgSVGConverter = 'ImageMagick';
2090 /** If not in the executable PATH, specify */
2091 $wgSVGConverterPath = '';
2092 /** Don't scale a SVG larger than this */
2093 $wgSVGMaxSize = 2048;
2095 * Don't thumbnail an image if it will use too much working memory
2096 * Default is 50 MB if decompressed to RGBA form, which corresponds to
2097 * 12.5 million pixels or 3500x3500
2099 $wgMaxImageArea = 1.25e7
;
2101 * Force thumbnailing of animated GIFs above this size to a single
2102 * frame instead of an animated thumbnail. ImageMagick seems to
2103 * get real unhappy and doesn't play well with resource limits. :P
2104 * Defaulting to 1 megapixel (1000x1000)
2106 $wgMaxAnimatedGifArea = 1.0e6
;
2108 * Browsers don't support TIFF inline generally...
2109 * For inline display, we need to convert to PNG or JPEG.
2110 * Note scaling should work with ImageMagick, but may not with GD scaling.
2111 * // PNG is lossless, but inefficient for photos
2112 * $wgTiffThumbnailType = array( 'png', 'image/png' );
2113 * // JPEG is good for photos, but has no transparency support. Bad for diagrams.
2114 * $wgTiffThumbnailType = array( 'jpg', 'image/jpeg' );
2116 $wgTiffThumbnailType = false;
2118 * If rendered thumbnail files are older than this timestamp, they
2119 * will be rerendered on demand as if the file didn't already exist.
2120 * Update if there is some need to force thumbs and SVG rasterizations
2121 * to rerender, such as fixes to rendering bugs.
2123 $wgThumbnailEpoch = '20030516000000';
2126 * If set, inline scaled images will still produce <img> tags ready for
2127 * output instead of showing an error message.
2129 * This may be useful if errors are transitory, especially if the site
2130 * is configured to automatically render thumbnails on request.
2132 * On the other hand, it may obscure error conditions from debugging.
2133 * Enable the debug log or the 'thumbnail' log group to make sure errors
2134 * are logged to a file for review.
2136 $wgIgnoreImageErrors = false;
2139 * Allow thumbnail rendering on page view. If this is false, a valid
2140 * thumbnail URL is still output, but no file will be created at
2141 * the target location. This may save some time if you have a
2142 * thumb.php or 404 handler set up which is faster than the regular
2145 $wgGenerateThumbnailOnParse = true;
2147 /** Whether or not to use image resizing */
2148 $wgUseImageResize = true;
2150 /** Set $wgCommandLineMode if it's not set already, to avoid notices */
2151 if( !isset( $wgCommandLineMode ) ) {
2152 $wgCommandLineMode = false;
2155 /** For colorized maintenance script output, is your terminal background dark ? */
2156 $wgCommandLineDarkBg = false;
2159 # Recent changes settings
2162 /** Log IP addresses in the recentchanges table; can be accessed only by extensions (e.g. CheckUser) or a DB admin */
2163 $wgPutIPinRC = true;
2166 * Recentchanges items are periodically purged; entries older than this many
2168 * Default: 13 weeks = about three monts
2170 $wgRCMaxAge = 13 * 7 * 24 * 3600;
2173 * Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers higher than what will be stored.
2174 * Note that this is disabled by default because we sometimes do have RC data which is beyond the limit
2175 * for some reason, and some users may use the high numbers to display that data which is still there.
2177 $wgRCFilterByAge = false;
2180 * List of Days and Limits options to list in the Special:Recentchanges and Special:Recentchangeslinked pages.
2182 $wgRCLinkLimits = array( 50, 100, 250, 500 );
2183 $wgRCLinkDays = array( 1, 3, 7, 14, 30 );
2186 * Send recent changes updates via UDP. The updates will be formatted for IRC.
2187 * Set this to the IP address of the receiver.
2189 $wgRC2UDPAddress = false;
2192 * Port number for RC updates
2194 $wgRC2UDPPort = false;
2197 * Prefix to prepend to each UDP packet.
2198 * This can be used to identify the wiki. A script is available called
2199 * mxircecho.py which listens on a UDP port, and uses a prefix ending in a
2200 * tab to identify the IRC channel to send the log line to.
2202 $wgRC2UDPPrefix = '';
2205 * If this is set to true, $wgLocalInterwiki will be prepended to links in the
2206 * IRC feed. If this is set to a string, that string will be used as the prefix.
2208 $wgRC2UDPInterwikiPrefix = false;
2211 * Set to true to omit "bot" edits (by users with the bot permission) from the
2214 $wgRC2UDPOmitBots = false;
2217 * Enable user search in Special:Newpages
2218 * This is really a temporary hack around an index install bug on some Wikipedias.
2219 * Kill it once fixed.
2221 $wgEnableNewpagesUserFilter = true;
2224 * Whether to use metadata edition
2225 * This will put categories, language links and allowed templates in a separate text box
2226 * while editing pages
2229 $wgUseMetadataEdit = false;
2230 /** Full name (including namespace) of the page containing templates names that will be allowed as metadata */
2231 $wgMetadataWhitelist = '';
2234 # Copyright and credits settings
2237 /** RDF metadata toggles */
2238 $wgEnableDublinCoreRdf = false;
2239 $wgEnableCreativeCommonsRdf = false;
2241 /** Override for copyright metadata.
2242 * TODO: these options need documentation
2244 $wgRightsPage = NULL;
2245 $wgRightsUrl = NULL;
2246 $wgRightsText = NULL;
2247 $wgRightsIcon = NULL;
2249 /** Set this to some HTML to override the rights icon with an arbitrary logo */
2250 $wgCopyrightIcon = NULL;
2252 /** Set this to true if you want detailed copyright information forms on Upload. */
2253 $wgUseCopyrightUpload = false;
2255 /** Set this to false if you want to disable checking that detailed copyright
2256 * information values are not empty. */
2257 $wgCheckCopyrightUpload = true;
2260 * Set this to the number of authors that you want to be credited below an
2261 * article text. Set it to zero to hide the attribution block, and a negative
2262 * number (like -1) to show all authors. Note that this will require 2-3 extra
2263 * database hits, which can have a not insignificant impact on performance for
2268 /** If there are more than $wgMaxCredits authors, show $wgMaxCredits of them.
2269 * Otherwise, link to a separate credits page. */
2270 $wgShowCreditsIfMax = true;
2275 * Set this to false to avoid forcing the first letter of links to capitals.
2276 * WARNING: may break links! This makes links COMPLETELY case-sensitive. Links
2277 * appearing with a capital at the beginning of a sentence will *not* go to the
2278 * same place as links in the middle of a sentence using a lowercase initial.
2280 $wgCapitalLinks = true;
2283 * List of interwiki prefixes for wikis we'll accept as sources for
2284 * Special:Import (for sysops). Since complete page history can be imported,
2285 * these should be 'trusted'.
2287 * If a user has the 'import' permission but not the 'importupload' permission,
2288 * they will only be able to run imports through this transwiki interface.
2290 $wgImportSources = array();
2293 * Optional default target namespace for interwiki imports.
2294 * Can use this to create an incoming "transwiki"-style queue.
2295 * Set to numeric key, not the name.
2297 * Users may override this in the Special:Import dialog.
2299 $wgImportTargetNamespace = null;
2302 * If set to false, disables the full-history option on Special:Export.
2303 * This is currently poorly optimized for long edit histories, so is
2304 * disabled on Wikimedia's sites.
2306 $wgExportAllowHistory = true;
2309 * If set nonzero, Special:Export requests for history of pages with
2310 * more revisions than this will be rejected. On some big sites things
2311 * could get bogged down by very very long pages.
2313 $wgExportMaxHistory = 0;
2316 * Return distinct author list (when not returning full history)
2318 $wgExportAllowListContributors = false ;
2321 * If non-zero, Special:Export accepts a "pagelink-depth" parameter
2322 * up to this specified level, which will cause it to include all
2323 * pages linked to from the pages you specify. Since this number
2324 * can become *insanely large* and could easily break your wiki,
2325 * it's disabled by default for now.
2327 * There's a HARD CODED limit of 5 levels of recursion to prevent a
2328 * crazy-big export from being done by someone setting the depth
2329 * number too high. In other words, last resort safety net.
2331 $wgExportMaxLinkDepth = 0;
2334 * Whether to allow the "export all pages in namespace" option
2336 $wgExportFromNamespaces = false;
2339 * Edits matching these regular expressions in body text
2340 * will be recognised as spam and rejected automatically.
2342 * There's no administrator override on-wiki, so be careful what you set. :)
2343 * May be an array of regexes or a single string for backwards compatibility.
2345 * See http://en.wikipedia.org/wiki/Regular_expression
2347 $wgSpamRegex = array();
2349 /** Same as the above except for edit summaries */
2350 $wgSummarySpamRegex = array();
2352 /** Similarly you can get a function to do the job. The function will be given
2353 * the following args:
2354 * - a Title object for the article the edit is made on
2355 * - the text submitted in the textarea (wpTextbox1)
2356 * - the section number.
2357 * The return should be boolean indicating whether the edit matched some evilness:
2359 * - false : let it through
2361 * For a complete example, have a look at the SpamBlacklist extension.
2363 $wgFilterCallback = false;
2365 /** Go button goes straight to the edit screen if the article doesn't exist. */
2366 $wgGoToEdit = false;
2368 /** Allow raw, unchecked HTML in <html>...</html> sections.
2369 * THIS IS VERY DANGEROUS on a publically editable site, so USE wgGroupPermissions
2370 * TO RESTRICT EDITING to only those that you trust
2375 * $wgUseTidy: use tidy to make sure HTML output is sane.
2376 * Tidy is a free tool that fixes broken HTML.
2377 * See http://www.w3.org/People/Raggett/tidy/
2378 * $wgTidyBin should be set to the path of the binary and
2379 * $wgTidyConf to the path of the configuration file.
2380 * $wgTidyOpts can include any number of parameters.
2382 * $wgTidyInternal controls the use of the PECL extension to use an in-
2383 * process tidy library instead of spawning a separate program.
2384 * Normally you shouldn't need to override the setting except for
2385 * debugging. To install, use 'pear install tidy' and add a line
2386 * 'extension=tidy.so' to php.ini.
2389 $wgAlwaysUseTidy = false;
2390 $wgTidyBin = 'tidy';
2391 $wgTidyConf = $IP.'/includes/tidy.conf';
2393 $wgTidyInternal = extension_loaded( 'tidy' );
2396 * Put tidy warnings in HTML comments
2397 * Only works for internal tidy.
2399 $wgDebugTidy = false;
2402 * Validate the overall output using tidy and refuse
2403 * to display the page if it's not valid.
2405 $wgValidateAllHtml = false;
2407 /** See list of skins and their symbolic names in languages/Language.php */
2408 $wgDefaultSkin = 'monobook';
2411 * Should we allow the user's to select their own skin that will override the default?
2412 * @deprecated in 1.16, use $wgHiddenPrefs[] = 'skin' to disable it
2414 $wgAllowUserSkin = true;
2417 * Optionally, we can specify a stylesheet to use for media="handheld".
2418 * This is recognized by some, but not all, handheld/mobile/PDA browsers.
2419 * If left empty, compliant handheld browsers won't pick up the skin
2420 * stylesheet, which is specified for 'screen' media.
2422 * Can be a complete URL, base-relative path, or $wgStylePath-relative path.
2423 * Try 'chick/main.css' to apply the Chick styles to the MonoBook HTML.
2425 * Will also be switched in when 'handheld=yes' is added to the URL, like
2426 * the 'printable=yes' mode for print media.
2428 $wgHandheldStyle = false;
2431 * If set, 'screen' and 'handheld' media specifiers for stylesheets are
2432 * transformed such that they apply to the iPhone/iPod Touch Mobile Safari,
2433 * which doesn't recognize 'handheld' but does support media queries on its
2436 * Consider only using this if you have a *really good* handheld stylesheet,
2437 * as iPhone users won't have any way to disable it and use the "grown-up"
2440 $wgHandheldForIPhone = false;
2443 * Settings added to this array will override the default globals for the user
2444 * preferences used by anonymous visitors and newly created accounts.
2445 * For instance, to disable section editing links:
2446 * $wgDefaultUserOptions ['editsection'] = 0;
2449 $wgDefaultUserOptions = array(
2454 'searchlimit' => 20,
2455 'contextlines' => 5,
2456 'contextchars' => 50,
2457 'disablesuggest' => 0,
2465 'hidepatrolled' => 0,
2466 'newpageshidepatrolled' => 0,
2467 'highlightbroken' => 1,
2468 'stubthreshold' => 0,
2469 'previewontop' => 1,
2470 'previewonfirst' => 0,
2472 'editsectiononrightclick' => 0,
2473 'editondblclick' => 0,
2477 'minordefault' => 0,
2478 'date' => 'default',
2481 'rememberpassword' => 0,
2484 'showhiddencats' => 0,
2485 'norollbackdiff' => 0,
2486 'enotifwatchlistpages' => 0,
2487 'enotifusertalkpages' => 1,
2488 'enotifminoredits' => 0,
2489 'enotifrevealaddr' => 0,
2490 'shownumberswatching' => 1,
2492 'externaleditor' => 0,
2493 'externaldiff' => 0,
2494 'forceeditsummary' => 0,
2495 'showjumplinks' => 1,
2497 'numberheadings' => 0,
2498 'uselivepreview' => 0,
2499 'watchlistdays' => 3.0,
2500 'extendwatchlist' => 0,
2501 'watchlisthideminor' => 0,
2502 'watchlisthidebots' => 0,
2503 'watchlisthideown' => 0,
2504 'watchlisthideanons' => 0,
2505 'watchlisthideliu' => 0,
2506 'watchlisthidepatrolled' => 0,
2507 'watchcreations' => 0,
2508 'watchdefault' => 0,
2510 'watchdeletion' => 0,
2511 'noconvertlink' => 0,
2512 'gender' => 'unknown',
2513 'ccmeonemails' => 0,
2518 * Whether or not to allow and use real name fields.
2519 * @deprecated in 1.16, use $wgHiddenPrefs[] = 'realname' below to disable real
2522 $wgAllowRealName = true;
2524 /** An array of preferences to not show for the user */
2525 $wgHiddenPrefs = array();
2527 /*****************************************************************************
2532 * A list of callback functions which are called once MediaWiki is fully initialised
2534 $wgExtensionFunctions = array();
2537 * Extension functions for initialisation of skins. This is called somewhat earlier
2538 * than $wgExtensionFunctions.
2540 $wgSkinExtensionFunctions = array();
2543 * Extension messages files
2544 * Associative array mapping extension name to the filename where messages can be found.
2545 * The file must create a variable called $messages.
2546 * When the messages are needed, the extension should call wfLoadExtensionMessages().
2549 * $wgExtensionMessagesFiles['ConfirmEdit'] = dirname(__FILE__).'/ConfirmEdit.i18n.php';
2552 $wgExtensionMessagesFiles = array();
2555 * Aliases for special pages provided by extensions.
2556 * Associative array mapping special page to array of aliases. First alternative
2557 * for each special page will be used as the normalised name for it. English
2558 * aliases will be added to the end of the list so that they always work. The
2559 * file must define a variable $aliases.
2562 * $wgExtensionAliasesFiles['Translate'] = dirname(__FILE__).'/Translate.alias.php';
2564 $wgExtensionAliasesFiles = array();
2567 * Parser output hooks.
2568 * This is an associative array where the key is an extension-defined tag
2569 * (typically the extension name), and the value is a PHP callback.
2570 * These will be called as an OutputPageParserOutput hook, if the relevant
2571 * tag has been registered with the parser output object.
2573 * Registration is done with $pout->addOutputHook( $tag, $data ).
2575 * The callback has the form:
2576 * function outputHook( $outputPage, $parserOutput, $data ) { ... }
2578 $wgParserOutputHooks = array();
2581 * List of valid skin names.
2582 * The key should be the name in all lower case, the value should be a display name.
2583 * The default skins will be added later, by Skin::getSkinNames(). Use
2584 * Skin::getSkinNames() as an accessor if you wish to have access to the full list.
2586 $wgValidSkinNames = array();
2589 * Special page list.
2590 * See the top of SpecialPage.php for documentation.
2592 $wgSpecialPages = array();
2595 * Array mapping class names to filenames, for autoloading.
2597 $wgAutoloadClasses = array();
2600 * An array of extension types and inside that their names, versions, authors,
2601 * urls, descriptions and pointers to localized description msgs. Note that
2602 * the version, url, description and descriptionmsg key can be omitted.
2605 * $wgExtensionCredits[$type][] = array(
2606 * 'name' => 'Example extension',
2608 * 'svn-revision' => '$LastChangedRevision$',
2609 * 'author' => 'Foo Barstein',
2610 * 'url' => 'http://wwww.example.com/Example%20Extension/',
2611 * 'description' => 'An example extension',
2612 * 'descriptionmsg' => 'exampleextension-desc',
2616 * Where $type is 'specialpage', 'parserhook', 'variable', 'media' or 'other'.
2618 $wgExtensionCredits = array();
2621 ******************************************************************************/
2624 * Allow user Javascript page?
2625 * This enables a lot of neat customizations, but may
2626 * increase security risk to users and server load.
2628 $wgAllowUserJs = false;
2631 * Allow user Cascading Style Sheets (CSS)?
2632 * This enables a lot of neat customizations, but may
2633 * increase security risk to users and server load.
2635 $wgAllowUserCss = false;
2637 /** Use the site's Javascript page? */
2638 $wgUseSiteJs = true;
2640 /** Use the site's Cascading Style Sheets (CSS)? */
2641 $wgUseSiteCss = true;
2643 /** Filter for Special:Randompage. Part of a WHERE clause */
2644 $wgExtraRandompageSQL = false;
2646 /** Allow the "info" action, very inefficient at the moment */
2647 $wgAllowPageInfo = false;
2649 /** Maximum indent level of toc. */
2650 $wgMaxTocLevel = 999;
2652 /** Name of the external diff engine to use */
2653 $wgExternalDiffEngine = false;
2655 /** Whether to use inline diff */
2656 $wgEnableHtmlDiff = false;
2658 /** Use RC Patrolling to check for vandalism */
2659 $wgUseRCPatrol = true;
2661 /** Use new page patrolling to check new pages on Special:Newpages */
2662 $wgUseNPPatrol = true;
2664 /** Provide syndication feeds (RSS, Atom) for, e.g., Recentchanges, Newpages */
2667 /** Set maximum number of results to return in syndication feeds (RSS, Atom) for
2668 * eg Recentchanges, Newpages. */
2671 /** _Minimum_ timeout for cached Recentchanges feed, in seconds.
2672 * A cached version will continue to be served out even if changes
2673 * are made, until this many seconds runs out since the last render.
2675 * If set to 0, feed caching is disabled. Use this for debugging only;
2676 * feed generation can be pretty slow with diffs.
2678 $wgFeedCacheTimeout = 60;
2680 /** When generating Recentchanges RSS/Atom feed, diffs will not be generated for
2681 * pages larger than this size. */
2682 $wgFeedDiffCutoff = 32768;
2684 /** Override the site's default RSS/ATOM feed for recentchanges that appears on
2685 * every page. Some sites might have a different feed they'd like to promote
2686 * instead of the RC feed (maybe like a "Recent New Articles" or "Breaking news" one).
2687 * Ex: $wgSiteFeed['format'] = "http://example.com/somefeed.xml"; Format can be one
2688 * of either 'rss' or 'atom'.
2690 $wgOverrideSiteFeed = array();
2693 * Additional namespaces. If the namespaces defined in Language.php and
2694 * Namespace.php are insufficient, you can create new ones here, for example,
2695 * to import Help files in other languages.
2696 * PLEASE NOTE: Once you delete a namespace, the pages in that namespace will
2697 * no longer be accessible. If you rename it, then you can access them through
2698 * the new namespace name.
2700 * Custom namespaces should start at 100 to avoid conflicting with standard
2701 * namespaces, and should always follow the even/odd main/talk pattern.
2703 #$wgExtraNamespaces =
2704 # array(100 => "Hilfe",
2705 # 101 => "Hilfe_Diskussion",
2707 # 103 => "Discussion_Aide"
2709 $wgExtraNamespaces = NULL;
2713 * These are alternate names for the primary localised namespace names, which
2714 * are defined by $wgExtraNamespaces and the language file. If a page is
2715 * requested with such a prefix, the request will be redirected to the primary
2718 * Set this to a map from namespace names to IDs.
2720 * $wgNamespaceAliases = array(
2721 * 'Wikipedian' => NS_USER,
2725 $wgNamespaceAliases = array();
2728 * Limit images on image description pages to a user-selectable limit. In order
2729 * to reduce disk usage, limits can only be selected from a list.
2730 * The user preference is saved as an array offset in the database, by default
2731 * the offset is set with $wgDefaultUserOptions['imagesize']. Make sure you
2732 * change it if you alter the array (see bug 8858).
2733 * This is the list of settings the user can choose from:
2735 $wgImageLimits = array (
2741 array(10000,10000) );
2744 * Adjust thumbnails on image pages according to a user setting. In order to
2745 * reduce disk usage, the values can only be selected from a list. This is the
2746 * list of settings the user can choose from:
2748 $wgThumbLimits = array(
2758 * Adjust width of upright images when parameter 'upright' is used
2759 * This allows a nicer look for upright images without the need to fix the width
2760 * by hardcoded px in wiki sourcecode.
2762 $wgThumbUpright = 0.75;
2765 * On category pages, show thumbnail gallery for images belonging to that
2766 * category instead of listing them as articles.
2768 $wgCategoryMagicGallery = true;
2771 * Paging limit for categories
2773 $wgCategoryPagingLimit = 200;
2776 * Should the default category sortkey be the prefixed title?
2777 * Run maintenance/refreshLinks.php after changing this.
2779 $wgCategoryPrefixedDefaultSortkey = true;
2782 * Browser Blacklist for unicode non compliant browsers
2783 * Contains a list of regexps : "/regexp/" matching problematic browsers
2785 $wgBrowserBlackList = array(
2787 * Netscape 2-4 detection
2788 * The minor version may contain strings such as "Gold" or "SGoldC-SGI"
2789 * Lots of non-netscape user agents have "compatible", so it's useful to check for that
2790 * with a negative assertion. The [UIN] identifier specifies the level of security
2791 * in a Netscape/Mozilla browser, checking for it rules out a number of fakers.
2792 * The language string is unreliable, it is missing on NS4 Mac.
2794 * Reference: http://www.psychedelix.com/agents/index.shtml
2796 '/^Mozilla\/2\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2797 '/^Mozilla\/3\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2798 '/^Mozilla\/4\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2801 * MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH>
2804 * - Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC)
2805 * - Mozilla/4.0 (compatible; MSIE 5.15; Mac_PowerPC)
2806 * - Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC)
2809 * @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864
2810 * @link http://en.wikipedia.org/wiki/Template%3AOS9
2812 '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
2815 * Google wireless transcoder, seems to eat a lot of chars alive
2816 * http://it.wikipedia.org/w/index.php?title=Luciano_Ligabue&diff=prev&oldid=8857361
2818 '/^Mozilla\/4\.0 \(compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder;\)/'
2822 * Fake out the timezone that the server thinks it's in. This will be used for
2823 * date display and not for what's stored in the DB. Leave to null to retain
2824 * your server's OS-based timezone value. This is the same as the timezone.
2826 * This variable is currently used ONLY for signature formatting, not for
2829 * Timezones can be translated by editing MediaWiki messages of type
2830 * timezone-nameinlowercase like timezone-utc.
2832 # $wgLocaltimezone = 'GMT';
2833 # $wgLocaltimezone = 'PST8PDT';
2834 # $wgLocaltimezone = 'Europe/Sweden';
2835 # $wgLocaltimezone = 'CET';
2836 $wgLocaltimezone = null;
2839 * Set an offset from UTC in minutes to use for the default timezone setting
2840 * for anonymous users and new user accounts.
2842 * This setting is used for most date/time displays in the software, and is
2843 * overrideable in user preferences. It is *not* used for signature timestamps.
2845 * You can set it to match the configured server timezone like this:
2846 * $wgLocalTZoffset = date("Z") / 60;
2848 * If your server is not configured for the timezone you want, you can set
2849 * this in conjunction with the signature timezone and override the TZ
2850 * environment variable like so:
2851 * $wgLocaltimezone="Europe/Berlin";
2852 * putenv("TZ=$wgLocaltimezone");
2853 * $wgLocalTZoffset = date("Z") / 60;
2855 * Leave at NULL to show times in universal time (UTC/GMT).
2857 $wgLocalTZoffset = null;
2861 * When translating messages with wfMsg(), it is not always clear what should
2862 * be considered UI messages and what should be content messages.
2864 * For example, for the English Wikipedia, there should be only one 'mainpage',
2865 * so when getting the link for 'mainpage', we should treat it as site content
2866 * and call wfMsgForContent(), but for rendering the text of the link, we call
2867 * wfMsg(). The code behaves this way by default. However, sites like the
2868 * Wikimedia Commons do offer different versions of 'mainpage' and the like for
2869 * different languages. This array provides a way to override the default
2870 * behavior. For example, to allow language-specific main page and community
2873 * $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' );
2875 $wgForceUIMsgAsContentMsg = array();
2879 * Authentication plugin.
2884 * Global list of hooks.
2885 * Add a hook by doing:
2886 * $wgHooks['event_name'][] = $function;
2888 * $wgHooks['event_name'][] = array($function, $data);
2890 * $wgHooks['event_name'][] = array($object, 'method');
2895 * The logging system has two levels: an event type, which describes the
2896 * general category and can be viewed as a named subset of all logs; and
2897 * an action, which is a specific kind of event that can exist in that
2900 $wgLogTypes = array( '',
2914 * This restricts log access to those who have a certain right
2915 * Users without this will not see it in the option menu and can not view it
2916 * Restricted logs are not added to recent changes
2917 * Logs should remain non-transcludable
2918 * Format: logtype => permissiontype
2920 $wgLogRestrictions = array(
2921 'suppress' => 'suppressionlog'
2925 * Show/hide links on Special:Log will be shown for these log types.
2927 * This is associative array of log type => boolean "hide by default"
2929 * See $wgLogTypes for a list of available log types.
2932 * $wgFilterLogTypes => array(
2934 * 'import' => false,
2937 * Will display show/hide links for the move and import logs. Move logs will be
2938 * hidden by default unless the link is clicked. Import logs will be shown by
2939 * default, and hidden when the link is clicked.
2941 * A message of the form log-show-hide-<type> should be added, and will be used
2942 * for the link text.
2944 $wgFilterLogTypes = array(
2949 * Lists the message key string for each log type. The localized messages
2950 * will be listed in the user interface.
2952 * Extensions with custom log types may add to this array.
2954 $wgLogNames = array(
2955 '' => 'all-logs-page',
2956 'block' => 'blocklogpage',
2957 'protect' => 'protectlogpage',
2958 'rights' => 'rightslog',
2959 'delete' => 'dellogpage',
2960 'upload' => 'uploadlogpage',
2961 'move' => 'movelogpage',
2962 'import' => 'importlogpage',
2963 'patrol' => 'patrol-log-page',
2964 'merge' => 'mergelog',
2965 'suppress' => 'suppressionlog',
2969 * Lists the message key string for descriptive text to be shown at the
2970 * top of each log type.
2972 * Extensions with custom log types may add to this array.
2974 $wgLogHeaders = array(
2975 '' => 'alllogstext',
2976 'block' => 'blocklogtext',
2977 'protect' => 'protectlogtext',
2978 'rights' => 'rightslogtext',
2979 'delete' => 'dellogpagetext',
2980 'upload' => 'uploadlogpagetext',
2981 'move' => 'movelogpagetext',
2982 'import' => 'importlogpagetext',
2983 'patrol' => 'patrol-log-header',
2984 'merge' => 'mergelogpagetext',
2985 'suppress' => 'suppressionlogtext',
2989 * Lists the message key string for formatting individual events of each
2990 * type and action when listed in the logs.
2992 * Extensions with custom log types may add to this array.
2994 $wgLogActions = array(
2995 'block/block' => 'blocklogentry',
2996 'block/unblock' => 'unblocklogentry',
2997 'block/reblock' => 'reblock-logentry',
2998 'protect/protect' => 'protectedarticle',
2999 'protect/modify' => 'modifiedarticleprotection',
3000 'protect/unprotect' => 'unprotectedarticle',
3001 'protect/move_prot' => 'movedarticleprotection',
3002 'rights/rights' => 'rightslogentry',
3003 'delete/delete' => 'deletedarticle',
3004 'delete/restore' => 'undeletedarticle',
3005 'delete/revision' => 'revdelete-logentry',
3006 'delete/event' => 'logdelete-logentry',
3007 'upload/upload' => 'uploadedimage',
3008 'upload/overwrite' => 'overwroteimage',
3009 'upload/revert' => 'uploadedimage',
3010 'move/move' => '1movedto2',
3011 'move/move_redir' => '1movedto2_redir',
3012 'import/upload' => 'import-logentry-upload',
3013 'import/interwiki' => 'import-logentry-interwiki',
3014 'merge/merge' => 'pagemerge-logentry',
3015 'suppress/revision' => 'revdelete-logentry',
3016 'suppress/file' => 'revdelete-logentry',
3017 'suppress/event' => 'logdelete-logentry',
3018 'suppress/delete' => 'suppressedarticle',
3019 'suppress/block' => 'blocklogentry',
3020 'suppress/reblock' => 'reblock-logentry',
3024 * The same as above, but here values are names of functions,
3027 $wgLogActionsHandlers = array();
3030 * Maintain a log of newusers at Log/newusers?
3032 $wgNewUserLog = true;
3035 * List of special pages, followed by what subtitle they should go under
3036 * at Special:SpecialPages
3038 $wgSpecialPageGroups = array(
3039 'DoubleRedirects' => 'maintenance',
3040 'BrokenRedirects' => 'maintenance',
3041 'Lonelypages' => 'maintenance',
3042 'Uncategorizedpages' => 'maintenance',
3043 'Uncategorizedcategories' => 'maintenance',
3044 'Uncategorizedimages' => 'maintenance',
3045 'Uncategorizedtemplates' => 'maintenance',
3046 'Unusedcategories' => 'maintenance',
3047 'Unusedimages' => 'maintenance',
3048 'Protectedpages' => 'maintenance',
3049 'Protectedtitles' => 'maintenance',
3050 'Unusedtemplates' => 'maintenance',
3051 'Withoutinterwiki' => 'maintenance',
3052 'Longpages' => 'maintenance',
3053 'Shortpages' => 'maintenance',
3054 'Ancientpages' => 'maintenance',
3055 'Deadendpages' => 'maintenance',
3056 'Wantedpages' => 'maintenance',
3057 'Wantedcategories' => 'maintenance',
3058 'Wantedfiles' => 'maintenance',
3059 'Wantedtemplates' => 'maintenance',
3060 'Unwatchedpages' => 'maintenance',
3061 'Fewestrevisions' => 'maintenance',
3063 'Userlogin' => 'login',
3064 'Userlogout' => 'login',
3065 'CreateAccount' => 'login',
3067 'Recentchanges' => 'changes',
3068 'Recentchangeslinked' => 'changes',
3069 'Watchlist' => 'changes',
3070 'Newimages' => 'changes',
3071 'Newpages' => 'changes',
3073 'Tags' => 'changes',
3075 'Upload' => 'media',
3076 'Listfiles' => 'media',
3077 'MIMEsearch' => 'media',
3078 'FileDuplicateSearch' => 'media',
3079 'Filepath' => 'media',
3081 'Listusers' => 'users',
3082 'Listgrouprights' => 'users',
3083 'Ipblocklist' => 'users',
3084 'Contributions' => 'users',
3085 'Emailuser' => 'users',
3086 'Listadmins' => 'users',
3087 'Listbots' => 'users',
3088 'Userrights' => 'users',
3089 'Blockip' => 'users',
3090 'Preferences' => 'users',
3091 'Resetpass' => 'users',
3092 'DeletedContributions' => 'users',
3094 'Mostlinked' => 'highuse',
3095 'Mostlinkedcategories' => 'highuse',
3096 'Mostlinkedtemplates' => 'highuse',
3097 'Mostcategories' => 'highuse',
3098 'Mostimages' => 'highuse',
3099 'Mostrevisions' => 'highuse',
3101 'Allpages' => 'pages',
3102 'Prefixindex' => 'pages',
3103 'Listredirects' => 'pages',
3104 'Categories' => 'pages',
3105 'Disambiguations' => 'pages',
3107 'Randompage' => 'redirects',
3108 'Randomredirect' => 'redirects',
3109 'Mypage' => 'redirects',
3110 'Mytalk' => 'redirects',
3111 'Mycontributions' => 'redirects',
3112 'Search' => 'redirects',
3113 'LinkSearch' => 'redirects',
3115 'Movepage' => 'pagetools',
3116 'MergeHistory' => 'pagetools',
3117 'Revisiondelete' => 'pagetools',
3118 'Undelete' => 'pagetools',
3119 'Export' => 'pagetools',
3120 'Import' => 'pagetools',
3121 'Whatlinkshere' => 'pagetools',
3123 'Statistics' => 'wiki',
3124 'Version' => 'wiki',
3126 'Unlockdb' => 'wiki',
3127 'Allmessages' => 'wiki',
3128 'Popularpages' => 'wiki',
3130 'Specialpages' => 'other',
3131 'Blockme' => 'other',
3132 'Booksources' => 'other',
3136 * Experimental preview feature to fetch rendered text
3137 * over an XMLHttpRequest from JavaScript instead of
3138 * forcing a submit and reload of the whole page.
3139 * Leave disabled unless you're testing it.
3141 $wgLivePreview = false;
3144 * Disable the internal MySQL-based search, to allow it to be
3145 * implemented by an extension instead.
3147 $wgDisableInternalSearch = false;
3150 * Set this to a URL to forward search requests to some external location.
3151 * If the URL includes '$1', this will be replaced with the URL-encoded
3154 * For example, to forward to Google you'd have something like:
3155 * $wgSearchForwardUrl = 'http://www.google.com/search?q=$1' .
3156 * '&domains=http://example.com' .
3157 * '&sitesearch=http://example.com' .
3158 * '&ie=utf-8&oe=utf-8';
3160 $wgSearchForwardUrl = null;
3163 * Set a default target for external links, e.g. _blank to pop up a new window
3165 $wgExternalLinkTarget = false;
3168 * If true, external URL links in wiki text will be given the
3169 * rel="nofollow" attribute as a hint to search engines that
3170 * they should not be followed for ranking purposes as they
3171 * are user-supplied and thus subject to spamming.
3173 $wgNoFollowLinks = true;
3176 * Namespaces in which $wgNoFollowLinks doesn't apply.
3177 * See Language.php for a list of namespaces.
3179 $wgNoFollowNsExceptions = array();
3182 * If this is set to an array of domains, external links to these domain names
3183 * (or any subdomains) will not be set to rel="nofollow" regardless of the
3184 * value of $wgNoFollowLinks. For instance:
3186 * $wgNoFollowDomainExceptions = array( 'en.wikipedia.org', 'wiktionary.org' );
3188 * This would add rel="nofollow" to links to de.wikipedia.org, but not
3189 * en.wikipedia.org, wiktionary.org, en.wiktionary.org, us.en.wikipedia.org,
3192 $wgNoFollowDomainExceptions = array();
3195 * Default robot policy. The default policy is to encourage indexing and fol-
3196 * lowing of links. It may be overridden on a per-namespace and/or per-page
3199 $wgDefaultRobotPolicy = 'index,follow';
3202 * Robot policies per namespaces. The default policy is given above, the array
3203 * is made of namespace constants as defined in includes/Defines.php. You can-
3204 * not specify a different default policy for NS_SPECIAL: it is always noindex,
3205 * nofollow. This is because a number of special pages (e.g., ListPages) have
3206 * many permutations of options that display the same data under redundant
3207 * URLs, so search engine spiders risk getting lost in a maze of twisty special
3208 * pages, all alike, and never reaching your actual content.
3211 * $wgNamespaceRobotPolicies = array( NS_TALK => 'noindex' );
3213 $wgNamespaceRobotPolicies = array();
3216 * Robot policies per article. These override the per-namespace robot policies.
3217 * Must be in the form of an array where the key part is a properly canonical-
3218 * ised text form title and the value is a robot policy.
3220 * $wgArticleRobotPolicies = array( 'Main Page' => 'noindex,follow',
3221 * 'User:Bob' => 'index,follow' );
3222 * Example that DOES NOT WORK because the names are not canonical text forms:
3223 * $wgArticleRobotPolicies = array(
3224 * # Underscore, not space!
3225 * 'Main_Page' => 'noindex,follow',
3226 * # "Project", not the actual project name!
3227 * 'Project:X' => 'index,follow',
3228 * # Needs to be "Abc", not "abc" (unless $wgCapitalLinks is false)!
3229 * 'abc' => 'noindex,nofollow'
3232 $wgArticleRobotPolicies = array();
3235 * An array of namespace keys in which the __INDEX__/__NOINDEX__ magic words
3236 * will not function, so users can't decide whether pages in that namespace are
3237 * indexed by search engines. If set to null, default to $wgContentNamespaces.
3239 * $wgExemptFromUserRobotsControl = array( NS_MAIN, NS_TALK, NS_PROJECT );
3241 $wgExemptFromUserRobotsControl = null;
3244 * Specifies the minimal length of a user password. If set to 0, empty pass-
3245 * words are allowed.
3247 $wgMinimalPasswordLength = 1;
3250 * Activate external editor interface for files and pages
3251 * See http://meta.wikimedia.org/wiki/Help:External_editors
3253 $wgUseExternalEditor = true;
3255 /** Whether or not to sort special pages in Special:Specialpages */
3257 $wgSortSpecialPages = true;
3260 * Specify the name of a skin that should not be presented in the list of a-
3261 * vailable skins. Use for blacklisting a skin which you do not want to remove
3262 * from the .../skins/ directory
3265 $wgSkipSkins = array(); # More of the same
3268 * Array of disabled article actions, e.g. view, edit, dublincore, delete, etc.
3270 $wgDisabledActions = array();
3273 * Disable redirects to special pages and interwiki redirects, which use a 302
3274 * and have no "redirected from" link.
3276 $wgDisableHardRedirects = false;
3279 * Use http.dnsbl.sorbs.net to check for open proxies
3281 $wgEnableSorbs = false;
3282 $wgSorbsUrl = 'http.dnsbl.sorbs.net.';
3285 * Proxy whitelist, list of addresses that are assumed to be non-proxy despite
3286 * what the other methods might say.
3288 $wgProxyWhitelist = array();
3291 * Simple rate limiter options to brake edit floods. Maximum number actions
3292 * allowed in the given number of seconds; after that the violating client re-
3293 * ceives HTTP 500 error pages until the period elapses.
3295 * array( 4, 60 ) for a maximum of 4 hits in 60 seconds.
3297 * This option set is experimental and likely to change. Requires memcached.
3299 $wgRateLimits = array(
3301 'anon' => null, // for any and all anonymous edits (aggregate)
3302 'user' => null, // for each logged-in user
3303 'newbie' => null, // for each recent (autoconfirmed) account; overrides 'user'
3304 'ip' => null, // for each anon and recent account
3305 'subnet' => null, // ... with final octet removed
3313 'mailpassword' => array(
3316 'emailuser' => array(
3322 * Set to a filename to log rate limiter hits.
3324 $wgRateLimitLog = null;
3327 * Array of groups which should never trigger the rate limiter
3329 * @deprecated as of 1.13.0, the preferred method is using
3330 * $wgGroupPermissions[]['noratelimit']. However, this will still
3333 * $wgRateLimitsExcludedGroups = array( 'sysop', 'bureaucrat' );
3335 $wgRateLimitsExcludedGroups = array();
3338 * On Special:Unusedimages, consider images "used", if they are put
3339 * into a category. Default (false) is not to count those as used.
3341 $wgCountCategorizedImagesAsUsed = false;
3344 * External stores allow including content
3345 * from non database sources following URL links
3347 * Short names of ExternalStore classes may be specified in an array here:
3348 * $wgExternalStores = array("http","file","custom")...
3350 * CAUTION: Access to database might lead to code execution
3352 $wgExternalStores = false;
3355 * An array of external mysql servers, e.g.
3356 * $wgExternalServers = array( 'cluster1' => array( 'srv28', 'srv29', 'srv30' ) );
3357 * Used by LBFactory_Simple, may be ignored if $wgLBFactoryConf is set to another class.
3359 $wgExternalServers = array();
3362 * The place to put new revisions, false to put them in the local text table.
3363 * Part of a URL, e.g. DB://cluster1
3365 * Can be an array instead of a single string, to enable data distribution. Keys
3366 * must be consecutive integers, starting at zero. Example:
3368 * $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' );
3371 $wgDefaultExternalStore = false;
3374 * Revision text may be cached in $wgMemc to reduce load on external storage
3375 * servers and object extraction overhead for frequently-loaded revisions.
3377 * Set to 0 to disable, or number of seconds before cache expiry.
3379 $wgRevisionCacheExpiry = 0;
3382 * list of trusted media-types and mime types.
3383 * Use the MEDIATYPE_xxx constants to represent media types.
3384 * This list is used by Image::isSafeFile
3386 * Types not listed here will have a warning about unsafe content
3387 * displayed on the images description page. It would also be possible
3388 * to use this for further restrictions, like disabling direct
3389 * [[media:...]] links for non-trusted formats.
3391 $wgTrustedMediaFormats= array(
3392 MEDIATYPE_BITMAP
, //all bitmap formats
3393 MEDIATYPE_AUDIO
, //all audio formats
3394 MEDIATYPE_VIDEO
, //all plain video formats
3395 "image/svg+xml", //svg (only needed if inline rendering of svg is not supported)
3396 "application/pdf", //PDF files
3397 #"application/x-shockwave-flash", //flash/shockwave movie
3401 * Allow special page inclusions such as {{Special:Allpages}}
3403 $wgAllowSpecialInclusion = true;
3406 * Timeout for HTTP requests done via CURL
3411 * Proxy to use for CURL requests.
3413 $wgHTTPProxy = false;
3416 * Enable interwiki transcluding. Only when iw_trans=1.
3418 $wgEnableScaryTranscluding = false;
3420 * Expiry time for interwiki transclusion
3422 $wgTranscludeCacheExpiry = 3600;
3425 * Support blog-style "trackbacks" for articles. See
3426 * http://www.sixapart.com/pronet/docs/trackback_spec for details.
3428 $wgUseTrackbacks = false;
3431 * Enable filtering of categories in Recentchanges
3433 $wgAllowCategorizedRecentChanges = false ;
3436 * Number of jobs to perform per request. May be less than one in which case
3437 * jobs are performed probabalistically. If this is zero, jobs will not be done
3438 * during ordinary apache requests. In this case, maintenance/runJobs.php should
3439 * be run periodically.
3444 * Number of rows to update per job
3446 $wgUpdateRowsPerJob = 500;
3449 * Number of rows to update per query
3451 $wgUpdateRowsPerQuery = 10;
3454 * Enable AJAX framework
3459 * List of Ajax-callable functions.
3460 * Extensions acting as Ajax callbacks must register here
3462 $wgAjaxExportList = array( 'wfAjaxGetThumbnailUrl', 'wfAjaxGetFileUrl' );
3465 * Enable watching/unwatching pages using AJAX.
3466 * Requires $wgUseAjax to be true too.
3467 * Causes wfAjaxWatch to be added to $wgAjaxExportList
3469 $wgAjaxWatch = true;
3472 * Enable AJAX check for file overwrite, pre-upload
3474 $wgAjaxUploadDestCheck = true;
3477 * Enable previewing licences via AJAX
3479 $wgAjaxLicensePreview = true;
3482 * Allow DISPLAYTITLE to change title display
3484 $wgAllowDisplayTitle = true;
3487 * for consistency, restrict DISPLAYTITLE to titles that normalize to the same canonical DB key
3489 $wgRestrictDisplayTitle = true;
3492 * Array of usernames which may not be registered or logged in from
3493 * Maintenance scripts can still use these
3495 $wgReservedUsernames = array(
3496 'MediaWiki default', // Default 'Main Page' and MediaWiki: message pages
3497 'Conversion script', // Used for the old Wikipedia software upgrade
3498 'Maintenance script', // Maintenance scripts which perform editing, image import script
3499 'Template namespace initialisation script', // Used in 1.2->1.3 upgrade
3500 'msg:double-redirect-fixer', // Automatic double redirect fix
3504 * MediaWiki will reject HTMLesque tags in uploaded files due to idiotic browsers which can't
3505 * perform basic stuff like MIME detection and which are vulnerable to further idiots uploading
3506 * crap files as images. When this directive is on, <title> will be allowed in files with
3507 * an "image/svg+xml" MIME type. You should leave this disabled if your web server is misconfigured
3508 * and doesn't send appropriate MIME types for SVG images.
3510 $wgAllowTitlesInSVG = false;
3513 * Array of namespaces which can be deemed to contain valid "content", as far
3514 * as the site statistics are concerned. Useful if additional namespaces also
3515 * contain "content" which should be considered when generating a count of the
3516 * number of articles in the wiki.
3518 $wgContentNamespaces = array( NS_MAIN
);
3521 * Maximum amount of virtual memory available to shell processes under linux, in KB.
3523 $wgMaxShellMemory = 102400;
3526 * Maximum file size created by shell processes under linux, in KB
3527 * ImageMagick convert for example can be fairly hungry for scratch space
3529 $wgMaxShellFileSize = 102400;
3532 * Maximum CPU time in seconds for shell processes under linux
3534 $wgMaxShellTime = 180;
3537 * Executable name of PHP cli client (php/php5)
3543 * Path of the djvudump executable
3544 * Enable this and $wgDjvuRenderer to enable djvu rendering
3546 # $wgDjvuDump = 'djvudump';
3550 * Path of the ddjvu DJVU renderer
3551 * Enable this and $wgDjvuDump to enable djvu rendering
3553 # $wgDjvuRenderer = 'ddjvu';
3554 $wgDjvuRenderer = null;
3557 * Path of the djvutxt DJVU text extraction utility
3558 * Enable this and $wgDjvuDump to enable text layer extraction from djvu files
3560 # $wgDjvuTxt = 'djvutxt';
3564 * Path of the djvutoxml executable
3565 * This works like djvudump except much, much slower as of version 3.5.
3567 * For now I recommend you use djvudump instead. The djvuxml output is
3568 * probably more stable, so we'll switch back to it as soon as they fix
3569 * the efficiency problem.
3570 * http://sourceforge.net/tracker/index.php?func=detail&aid=1704049&group_id=32953&atid=406583
3572 # $wgDjvuToXML = 'djvutoxml';
3573 $wgDjvuToXML = null;
3577 * Shell command for the DJVU post processor
3578 * Default: pnmtopng, since ddjvu generates ppm output
3579 * Set this to false to output the ppm file directly.
3581 $wgDjvuPostProcessor = 'pnmtojpeg';
3583 * File extension for the DJVU post processor output
3585 $wgDjvuOutputExtension = 'jpg';
3588 * Enable the MediaWiki API for convenient access to
3589 * machine-readable data via api.php
3591 * See http://www.mediawiki.org/wiki/API
3593 $wgEnableAPI = true;
3596 * Allow the API to be used to perform write operations
3597 * (page edits, rollback, etc.) when an authorised user
3600 $wgEnableWriteAPI = true;
3603 * API module extensions
3604 * Associative array mapping module name to class name.
3605 * Extension modules may override the core modules.
3607 $wgAPIModules = array();
3608 $wgAPIMetaModules = array();
3609 $wgAPIPropModules = array();
3610 $wgAPIListModules = array();
3613 * Maximum amount of rows to scan in a DB query in the API
3614 * The default value is generally fine
3616 $wgAPIMaxDBRows = 5000;
3619 * The maximum size (in bytes) of an API result.
3620 * Don't set this lower than $wgMaxArticleSize*1024
3622 $wgAPIMaxResultSize = 8388608;
3625 * The maximum number of uncached diffs that can be retrieved in one API
3626 * request. Set this to 0 to disable API diffs altogether
3628 $wgAPIMaxUncachedDiffs = 1;
3631 * Parser test suite files to be run by parserTests.php when no specific
3632 * filename is passed to it.
3634 * Extensions may add their own tests to this array, or site-local tests
3635 * may be added via LocalSettings.php
3639 $wgParserTestFiles = array(
3640 "$IP/maintenance/parserTests.txt",
3644 * Break out of framesets. This can be used to prevent external sites from
3645 * framing your site with ads.
3647 $wgBreakFrames = false;
3650 * Set this to an array of special page names to prevent
3651 * maintenance/updateSpecialPages.php from updating those pages.
3653 $wgDisableQueryPageUpdate = false;
3656 * Disable output compression (enabled by default if zlib is available)
3658 $wgDisableOutputCompression = false;
3661 * If lag is higher than $wgSlaveLagWarning, show a warning in some special
3662 * pages (like watchlist). If the lag is higher than $wgSlaveLagCritical,
3663 * show a more obvious warning.
3665 $wgSlaveLagWarning = 10;
3666 $wgSlaveLagCritical = 30;
3669 * Parser configuration. Associative array with the following members:
3671 * class The class name
3673 * preprocessorClass The preprocessor class. Two classes are currently available:
3674 * Preprocessor_Hash, which uses plain PHP arrays for tempoarary
3675 * storage, and Preprocessor_DOM, which uses the DOM module for
3676 * temporary storage. Preprocessor_DOM generally uses less memory;
3677 * the speed of the two is roughly the same.
3679 * If this parameter is not given, it uses Preprocessor_DOM if the
3680 * DOM module is available, otherwise it uses Preprocessor_Hash.
3682 * The entire associative array will be passed through to the constructor as
3683 * the first parameter. Note that only Setup.php can use this variable --
3684 * the configuration will change at runtime via $wgParser member functions, so
3685 * the contents of this variable will be out-of-date. The variable can only be
3686 * changed during LocalSettings.php, in particular, it can't be changed during
3687 * an extension setup function.
3689 $wgParserConf = array(
3690 'class' => 'Parser',
3691 #'preprocessorClass' => 'Preprocessor_Hash',
3695 * LinkHolderArray batch size
3698 $wgLinkHolderBatchSize = 1000;
3701 * Hooks that are used for outputting exceptions. Format is:
3702 * $wgExceptionHooks[] = $funcname
3704 * $wgExceptionHooks[] = array( $class, $funcname )
3705 * Hooks should return strings or false
3707 $wgExceptionHooks = array();
3710 * Page property link table invalidation lists. Should only be set by exten-
3713 $wgPagePropLinkInvalidations = array(
3714 'hiddencat' => 'categorylinks',
3718 * Maximum number of links to a redirect page listed on
3719 * Special:Whatlinkshere/RedirectDestination
3721 $wgMaxRedirectLinksRetrieved = 500;
3724 * Maximum number of calls per parse to expensive parser functions such as
3727 $wgExpensiveParserFunctionLimit = 100;
3730 * Maximum number of pages to move at once when moving subpages with a page.
3732 $wgMaximumMovedPages = 100;
3735 * Fix double redirects after a page move.
3736 * Tends to conflict with page move vandalism, use only on a private wiki.
3738 $wgFixDoubleRedirects = false;
3741 * Max number of redirects to follow when resolving redirects.
3742 * 1 means only the first redirect is followed (default behavior).
3743 * 0 or less means no redirects are followed.
3745 $wgMaxRedirects = 1;
3748 * Array of invalid page redirect targets.
3749 * Attempting to create a redirect to any of the pages in this array
3750 * will make the redirect fail.
3751 * Userlogout is hard-coded, so it does not need to be listed here.
3752 * (bug 10569) Disallow Mypage and Mytalk as well.
3754 * As of now, this only checks special pages. Redirects to pages in
3755 * other namespaces cannot be invalidated by this variable.
3757 $wgInvalidRedirectTargets = array( 'Filepath', 'Mypage', 'Mytalk' );
3760 * Array of namespaces to generate a sitemap for when the
3761 * maintenance/generateSitemap.php script is run, or false if one is to be ge-
3762 * nerated for all namespaces.
3764 $wgSitemapNamespaces = false;
3768 * If user doesn't specify any edit summary when making a an edit, MediaWiki
3769 * will try to automatically create one. This feature can be disabled by set-
3770 * ting this variable false.
3772 $wgUseAutomaticEditSummaries = true;
3775 * Limit password attempts to X attempts per Y seconds per IP per account.
3776 * Requires memcached.
3778 $wgPasswordAttemptThrottle = array( 'count' => 5, 'seconds' => 300 );
3781 * Display user edit counts in various prominent places.
3783 $wgEdititis = false;
3786 * Enable the UniversalEditButton for browsers that support it
3787 * (currently only Firefox with an extension)
3788 * See http://universaleditbutton.org for more background information
3790 $wgUniversalEditButton = true;
3793 * Allow id's that don't conform to HTML4 backward compatibility requirements.
3794 * This is currently for testing; if all goes well, this option will be removed
3795 * and the functionality will be enabled universally.
3797 $wgEnforceHtmlIds = true;
3800 * Search form behavior
3801 * true = use Go & Search buttons
3802 * false = use Go button & Advanced search link
3804 $wgUseTwoButtonsSearchForm = true;
3807 * Preprocessor caching threshold
3809 $wgPreprocessorCacheThreshold = 1000;
3812 * Allow filtering by change tag in recentchanges, history, etc
3813 * Has no effect if no tags are defined in valid_tag.
3815 $wgUseTagFilter = true;
3818 * Allow redirection to another page when a user logs in.
3819 * To enable, set to a string like 'Main Page'
3821 $wgRedirectOnLogin = null;
3824 * Characters to prevent during new account creations.
3825 * This is used in a regular expression character class during
3826 * registration (regex metacharacters like / are escaped).
3828 $wgInvalidUsernameCharacters = '@';
3831 * Character used as a delimiter when testing for interwiki userrights
3832 * (In Special:UserRights, it is possible to modify users on different
3833 * databases if the delimiter is used, e.g. Someuser@enwiki).
3835 * It is recommended that you have this delimiter in
3836 * $wgInvalidUsernameCharacters above, or you will not be able to
3837 * modify the user rights of those users via Special:UserRights
3839 $wgUserrightsInterwikiDelimiter = '@';