includes/DefaultSettings.php

   1 <?php
   2 /**
   3  *
   4  *                 NEVER EDIT THIS FILE
   5  *
   6  *
   7  * To customize your installation, edit "LocalSettings.php". If you make
   8  * changes here, they will be lost on next upgrade of MediaWiki!
   9  *
  10  * Note that since all these string interpolations are expanded
  11  * before LocalSettings is included, if you localize something
  12  * like $wgScriptPath, you must also localize everything that
  13  * depends on it.
  14  *
  15  * Documentation is in the source and on:
  16  * http://www.mediawiki.org/wiki/Manual:Configuration_settings
  17  *
  18  */
  19
  20 # This is not a valid entry point, perform no further processing unless MEDIAWIKI is defined
  21 if( !defined( 'MEDIAWIKI' ) ) {
  22         echo "This file is part of MediaWiki and is not a valid entry point\n";
  23         die( 1 );
  24 }
  25
  26 /**
  27  * Create a site configuration object
  28  * Not used for much in a default install
  29  */
  30 require_once( "$IP/includes/SiteConfiguration.php" );
  31 $wgConf = new SiteConfiguration;
  32
  33 /** MediaWiki version number */
  34 $wgVersion                      = '1.13alpha';
  35
  36 /** Name of the site. It must be changed in LocalSettings.php */
  37 $wgSitename         = 'MediaWiki';
  38
  39 /**
  40  * Name of the project namespace. If left set to false, $wgSitename will be
  41  * used instead.
  42  */
  43 $wgMetaNamespace    = false;
  44
  45 /**
  46  * Name of the project talk namespace. If left set to false, a name derived
  47  * from the name of the project namespace will be used.
  48  */
  49 $wgMetaNamespaceTalk = false;
  50
  51
  52 /** URL of the server. It will be automatically built including https mode */
  53 $wgServer = '';
  54
  55 if( isset( $_SERVER['SERVER_NAME'] ) ) {
  56         $wgServerName = $_SERVER['SERVER_NAME'];
  57 } elseif( isset( $_SERVER['HOSTNAME'] ) ) {
  58         $wgServerName = $_SERVER['HOSTNAME'];
  59 } elseif( isset( $_SERVER['HTTP_HOST'] ) ) {
  60         $wgServerName = $_SERVER['HTTP_HOST'];
  61 } elseif( isset( $_SERVER['SERVER_ADDR'] ) ) {
  62         $wgServerName = $_SERVER['SERVER_ADDR'];
  63 } else {
  64         $wgServerName = 'localhost';
  65 }
  66
  67 # check if server use https:
  68 $wgProto = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] == 'on') ? 'https' : 'http';
  69
  70 $wgServer = $wgProto.'://' . $wgServerName;
  71 # If the port is a non-standard one, add it to the URL
  72 if(    isset( $_SERVER['SERVER_PORT'] )
  73         && !strpos( $wgServerName, ':' )
  74     && (    ( $wgProto == 'http' && $_SERVER['SERVER_PORT'] != 80 )
  75          || ( $wgProto == 'https' && $_SERVER['SERVER_PORT'] != 443 ) ) ) {
  76
  77         $wgServer .= ":" . $_SERVER['SERVER_PORT'];
  78 }
  79
  80
  81 /**
  82  * The path we should point to.
  83  * It might be a virtual path in case with use apache mod_rewrite for example
  84  *
  85  * This *needs* to be set correctly.
  86  *
  87  * Other paths will be set to defaults based on it unless they are directly
  88  * set in LocalSettings.php
  89  */
  90 $wgScriptPath       = '/wiki';
  91
  92 /**
  93  * Whether to support URLs like index.php/Page_title
  94  * These often break when PHP is set up in CGI mode.
  95  * PATH_INFO *may* be correct if cgi.fix_pathinfo is
  96  * set, but then again it may not; lighttpd converts
  97  * incoming path data to lowercase on systems with
  98  * case-insensitive filesystems, and there have been
  99  * reports of problems on Apache as well.
 100  *
 101  * To be safe we'll continue to keep it off by default.
 102  *
 103  * Override this to false if $_SERVER['PATH_INFO']
 104  * contains unexpectedly incorrect garbage, or to
 105  * true if it is really correct.
 106  *
 107  * The default $wgArticlePath will be set based on
 108  * this value at runtime, but if you have customized
 109  * it, having this incorrectly set to true can
 110  * cause redirect loops when "pretty URLs" are used.
 111  *
 112  */
 113 $wgUsePathInfo =
 114         ( strpos( php_sapi_name(), 'cgi' ) === false ) &&
 115         ( strpos( php_sapi_name(), 'apache2filter' ) === false ) &&
 116         ( strpos( php_sapi_name(), 'isapi' ) === false );
 117
 118
 119 /**#@+
 120  * Script users will request to get articles
 121  * ATTN: Old installations used wiki.phtml and redirect.phtml -
 122  * make sure that LocalSettings.php is correctly set!
 123  *
 124  * Will be set based on $wgScriptPath in Setup.php if not overridden
 125  * in LocalSettings.php. Generally you should not need to change this
 126  * unless you don't like seeing "index.php".
 127  */
 128 $wgScriptExtension  = '.php'; /// extension to append to script names by default
 129 $wgScript           = false; /// defaults to "{$wgScriptPath}/index{$wgScriptExtension}"
 130 $wgRedirectScript   = false; /// defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}"
 131 /**#@-*/
 132
 133
 134 /**#@+
 135  * These various web and file path variables are set to their defaults
 136  * in Setup.php if they are not explicitly set from LocalSettings.php.
 137  * If you do override them, be sure to set them all!
 138  *
 139  * These will relatively rarely need to be set manually, unless you are
 140  * splitting style sheets or images outside the main document root.
 141  *
 142  * @global string
 143  */
 144 /**
 145  * style path as seen by users
 146  */
 147 $wgStylePath   = false; /// defaults to "{$wgScriptPath}/skins"
 148 /**
 149  * filesystem stylesheets directory
 150  */
 151 $wgStyleDirectory = false; /// defaults to "{$IP}/skins"
 152 $wgStyleSheetPath = &$wgStylePath;
 153 $wgArticlePath      = false; /// default to "{$wgScript}/$1" or "{$wgScript}?title=$1", depending on $wgUsePathInfo
 154 $wgVariantArticlePath = false;
 155 $wgUploadPath       = false; /// defaults to "{$wgScriptPath}/images"
 156 $wgUploadDirectory      = false; /// defaults to "{$IP}/images"
 157 $wgHashedUploadDirectory        = true;
 158 $wgLogo                         = false; /// defaults to "{$wgStylePath}/common/images/wiki.png"
 159 $wgFavicon                      = '/favicon.ico';
 160 $wgAppleTouchIcon   = false; /// This one'll actually default to off. For iPhone and iPod Touch web app bookmarks
 161 $wgMathPath         = false; /// defaults to "{$wgUploadPath}/math"
 162 $wgMathDirectory    = false; /// defaults to "{$wgUploadDirectory}/math"
 163 $wgTmpDirectory     = false; /// defaults to "{$wgUploadDirectory}/tmp"
 164 $wgUploadBaseUrl    = "";
 165 /**#@-*/
 166
 167 /**
 168  * New file storage paths; currently used only for deleted files.
 169  * Set it like this:
 170  *
 171  *   $wgFileStore['deleted']['directory'] = '/var/wiki/private/deleted';
 172  *
 173  */
 174 $wgFileStore = array();
 175 $wgFileStore['deleted']['directory'] = false;// Defaults to $wgUploadDirectory/deleted
 176 $wgFileStore['deleted']['url'] = null;       // Private
 177 $wgFileStore['deleted']['hash'] = 3;         // 3-level subdirectory split
 178
 179 /**#@+
 180  * File repository structures
 181  *
 182  * $wgLocalFileRepo is a single repository structure, and $wgForeignFileRepo is
 183  * a an array of such structures. Each repository structure is an associative
 184  * array of properties configuring the repository.
 185  *
 186  * Properties required for all repos:
 187  *    class             The class name for the repository. May come from the core or an extension.
 188  *                      The core repository classes are LocalRepo, ForeignDBRepo, FSRepo.
 189  *
 190  *    name                              A unique name for the repository.
 191  *
 192  * For all core repos:
 193  *    url               Base public URL
 194  *    hashLevels        The number of directory levels for hash-based division of files
 195  *    thumbScriptUrl    The URL for thumb.php (optional, not recommended)
 196  *    transformVia404   Whether to skip media file transformation on parse and rely on a 404
 197  *                      handler instead.
 198  *    initialCapital    Equivalent to $wgCapitalLinks, determines whether filenames implicitly
 199  *                      start with a capital letter. The current implementation may give incorrect
 200  *                      description page links when the local $wgCapitalLinks and initialCapital
 201  *                      are mismatched.
 202  *    pathDisclosureProtection
 203  *                      May be 'paranoid' to remove all parameters from error messages, 'none' to
 204  *                      leave the paths in unchanged, or 'simple' to replace paths with
 205  *                      placeholders. Default for LocalRepo is 'simple'.
 206  *
 207  * These settings describe a foreign MediaWiki installation. They are optional, and will be ignored
 208  * for local repositories:
 209  *    descBaseUrl       URL of image description pages, e.g. http://en.wikipedia.org/wiki/Image:
 210  *    scriptDirUrl      URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g.
 211  *                      http://en.wikipedia.org/w
 212  *
 213  *    articleUrl        Equivalent to $wgArticlePath, e.g. http://en.wikipedia.org/wiki/$1
 214  *    fetchDescription  Fetch the text of the remote file description page. Equivalent to
 215  *                      $wgFetchCommonsDescriptions.
 216  *
 217  * ForeignDBRepo:
 218  *    dbType, dbServer, dbUser, dbPassword, dbName, dbFlags
 219  *                      equivalent to the corresponding member of $wgDBservers
 220  *    tablePrefix       Table prefix, the foreign wiki's $wgDBprefix
 221  *    hasSharedCache    True if the wiki's shared cache is accessible via the local $wgMemc
 222  *
 223  * The default is to initialise these arrays from the MW<1.11 backwards compatible settings:
 224  * $wgUploadPath, $wgThumbnailScriptPath, $wgSharedUploadDirectory, etc.
 225  */
 226 $wgLocalFileRepo = false;
 227 $wgForeignFileRepos = array();
 228 /**#@-*/
 229
 230 /**
 231  * Allowed title characters -- regex character class
 232  * Don't change this unless you know what you're doing
 233  *
 234  * Problematic punctuation:
 235  *  []{}|#    Are needed for link syntax, never enable these
 236  *  <>        Causes problems with HTML escaping, don't use
 237  *  %         Enabled by default, minor problems with path to query rewrite rules, see below
 238  *  +         Enabled by default, but doesn't work with path to query rewrite rules, corrupted by apache
 239  *  ?         Enabled by default, but doesn't work with path to PATH_INFO rewrites
 240  *
 241  * All three of these punctuation problems can be avoided by using an alias, instead of a
 242  * rewrite rule of either variety.
 243  *
 244  * The problem with % is that when using a path to query rewrite rule, URLs are
 245  * double-unescaped: once by Apache's path conversion code, and again by PHP. So
 246  * %253F, for example, becomes "?". Our code does not double-escape to compensate
 247  * for this, indeed double escaping would break if the double-escaped title was
 248  * passed in the query string rather than the path. This is a minor security issue
 249  * because articles can be created such that they are hard to view or edit.
 250  *
 251  * In some rare cases you may wish to remove + for compatibility with old links.
 252  *
 253  * Theoretically 0x80-0x9F of ISO 8859-1 should be disallowed, but
 254  * this breaks interlanguage links
 255  */
 256 $wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF+";
 257
 258
 259 /**
 260  * The external URL protocols
 261  */
 262 $wgUrlProtocols = array(
 263         'http://',
 264         'https://',
 265         'ftp://',
 266         'irc://',
 267         'gopher://',
 268         'telnet://', // Well if we're going to support the above.. -ævar
 269         'nntp://', // @bug 3808 RFC 1738
 270         'worldwind://',
 271         'mailto:',
 272         'news:'
 273 );
 274
 275 /** internal name of virus scanner. This servers as a key to the $wgAntivirusSetup array.
 276  * Set this to NULL to disable virus scanning. If not null, every file uploaded will be scanned for viruses.
 277  * @global string $wgAntivirus
 278  */
 279 $wgAntivirus= NULL;
 280
 281 /** Configuration for different virus scanners. This an associative array of associative arrays:
 282  * it contains on setup array per known scanner type. The entry is selected by $wgAntivirus, i.e.
 283  * valid values for $wgAntivirus are the keys defined in this array.
 284  *
 285  * The configuration array for each scanner contains the following keys: "command", "codemap", "messagepattern";
 286  *
 287  * "command" is the full command to call the virus scanner - %f will be replaced with the name of the
 288  * file to scan. If not present, the filename will be appended to the command. Note that this must be
 289  * overwritten if the scanner is not in the system path; in that case, plase set
 290  * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full path.
 291  *
 292  * "codemap" is a mapping of exit code to return codes of the detectVirus function in SpecialUpload.
 293  * An exit code mapped to AV_SCAN_FAILED causes the function to consider the scan to be failed. This will pass
 294  * the file if $wgAntivirusRequired is not set.
 295  * An exit code mapped to AV_SCAN_ABORTED causes the function to consider the file to have an usupported format,
 296  * which is probably imune to virusses. This causes the file to pass.
 297  * An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning no virus was found.
 298  * All other codes (like AV_VIRUS_FOUND) will cause the function to report a virus.
 299  * You may use "*" as a key in the array to catch all exit codes not mapped otherwise.
 300  *
 301  * "messagepattern" is a perl regular expression to extract the meaningful part of the scanners
 302  * output. The relevant part should be matched as group one (\1).
 303  * If not defined or the pattern does not match, the full message is shown to the user.
 304  *
 305  * @global array $wgAntivirusSetup
 306  */
 307 $wgAntivirusSetup = array(
 308
 309         #setup for clamav
 310         'clamav' => array (
 311                 'command' => "clamscan --no-summary ",
 312
 313                 'codemap' => array (
 314                         "0" =>  AV_NO_VIRUS, # no virus
 315                         "1" =>  AV_VIRUS_FOUND, # virus found
 316                         "52" => AV_SCAN_ABORTED, # unsupported file format (probably imune)
 317                         "*" =>  AV_SCAN_FAILED, # else scan failed
 318                 ),
 319
 320                 'messagepattern' => '/.*?:(.*)/sim',
 321         ),
 322
 323         #setup for f-prot
 324         'f-prot' => array (
 325                 'command' => "f-prot ",
 326
 327                 'codemap' => array (
 328                         "0" => AV_NO_VIRUS, # no virus
 329                         "3" => AV_VIRUS_FOUND, # virus found
 330                         "6" => AV_VIRUS_FOUND, # virus found
 331                         "*" => AV_SCAN_FAILED, # else scan failed
 332                 ),
 333
 334                 'messagepattern' => '/.*?Infection:(.*)$/m',
 335         ),
 336 );
 337
 338
 339 /** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected.
 340  * @global boolean $wgAntivirusRequired
 341 */
 342 $wgAntivirusRequired= true;
 343
 344 /** Determines if the mime type of uploaded files should be checked
 345  * @global boolean $wgVerifyMimeType
 346 */
 347 $wgVerifyMimeType= true;
 348
 349 /** Sets the mime type definition file to use by MimeMagic.php.
 350 * @global string $wgMimeTypeFile
 351 */
 352 $wgMimeTypeFile= "includes/mime.types";
 353 #$wgMimeTypeFile= "/etc/mime.types";
 354 #$wgMimeTypeFile= NULL; #use built-in defaults only.
 355
 356 /** Sets the mime type info file to use by MimeMagic.php.
 357 * @global string $wgMimeInfoFile
 358 */
 359 $wgMimeInfoFile= "includes/mime.info";
 360 #$wgMimeInfoFile= NULL; #use built-in defaults only.
 361
 362 /** Switch for loading the FileInfo extension by PECL at runtime.
 363  * This should be used only if fileinfo is installed as a shared object
 364  * or a dynamic libary
 365  * @global string $wgLoadFileinfoExtension
 366 */
 367 $wgLoadFileinfoExtension= false;
 368
 369 /** Sets an external mime detector program. The command must print only
 370  * the mime type to standard output.
 371  * The name of the file to process will be appended to the command given here.
 372  * If not set or NULL, mime_content_type will be used if available.
 373 */
 374 $wgMimeDetectorCommand= NULL; # use internal mime_content_type function, available since php 4.3.0
 375 #$wgMimeDetectorCommand= "file -bi"; #use external mime detector (Linux)
 376
 377 /** Switch for trivial mime detection. Used by thumb.php to disable all fance
 378  * things, because only a few types of images are needed and file extensions
 379  * can be trusted.
 380 */
 381 $wgTrivialMimeDetection= false;
 382
 383 /**
 384  * To set 'pretty' URL paths for actions other than
 385  * plain page views, add to this array. For instance:
 386  *   'edit' => "$wgScriptPath/edit/$1"
 387  *
 388  * There must be an appropriate script or rewrite rule
 389  * in place to handle these URLs.
 390  */
 391 $wgActionPaths = array();
 392
 393 /**
 394  * If you operate multiple wikis, you can define a shared upload path here.
 395  * Uploads to this wiki will NOT be put there - they will be put into
 396  * $wgUploadDirectory.
 397  * If $wgUseSharedUploads is set, the wiki will look in the shared repository if
 398  * no file of the given name is found in the local repository (for [[Image:..]],
 399  * [[Media:..]] links). Thumbnails will also be looked for and generated in this
 400  * directory.
 401  *
 402  * Note that these configuration settings can now be defined on a per-
 403  * repository basis for an arbitrary number of file repositories, using the
 404  * $wgForeignFileRepos variable.
 405  */
 406 $wgUseSharedUploads = false;
 407 /** Full path on the web server where shared uploads can be found */
 408 $wgSharedUploadPath = "http://commons.wikimedia.org/shared/images";
 409 /** Fetch commons image description pages and display them on the local wiki? */
 410 $wgFetchCommonsDescriptions = false;
 411 /** Path on the file system where shared uploads can be found. */
 412 $wgSharedUploadDirectory = "/var/www/wiki3/images";
 413 /** DB name with metadata about shared directory. Set this to false if the uploads do not come from a wiki. */
 414 $wgSharedUploadDBname = false;
 415 /** Optional table prefix used in database. */
 416 $wgSharedUploadDBprefix = '';
 417 /** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */
 418 $wgCacheSharedUploads = true;
 419 /** Allow for upload to be copied from an URL. Requires Special:Upload?source=web */
 420 $wgAllowCopyUploads = false;
 421 /**
 422  * Max size for uploads, in bytes.  Currently only works for uploads from URL
 423  * via CURL (see $wgAllowCopyUploads).  The only way to impose limits on
 424  * normal uploads is currently to edit php.ini.
 425  */
 426 $wgMaxUploadSize = 1024*1024*100; # 100MB
 427
 428 /**
 429  * Point the upload navigation link to an external URL
 430  * Useful if you want to use a shared repository by default
 431  * without disabling local uploads (use $wgEnableUploads = false for that)
 432  * e.g. $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
 433 */
 434 $wgUploadNavigationUrl = false;
 435
 436 /**
 437  * Give a path here to use thumb.php for thumbnail generation on client request, instead of
 438  * generating them on render and outputting a static URL. This is necessary if some of your
 439  * apache servers don't have read/write access to the thumbnail path.
 440  *
 441  * Example:
 442  *   $wgThumbnailScriptPath = "{$wgScriptPath}/thumb{$wgScriptExtension}";
 443  */
 444 $wgThumbnailScriptPath = false;
 445 $wgSharedThumbnailScriptPath = false;
 446
 447 /**
 448  * Set the following to false especially if you have a set of files that need to
 449  * be accessible by all wikis, and you do not want to use the hash (path/a/aa/)
 450  * directory layout.
 451  */
 452 $wgHashedSharedUploadDirectory = true;
 453
 454 /**
 455  * Base URL for a repository wiki. Leave this blank if uploads are just stored
 456  * in a shared directory and not meant to be accessible through a separate wiki.
 457  * Otherwise the image description pages on the local wiki will link to the
 458  * image description page on this wiki.
 459  *
 460  * Please specify the namespace, as in the example below.
 461  */
 462 $wgRepositoryBaseUrl = "http://commons.wikimedia.org/wiki/Image:";
 463
 464
 465 #
 466 # Email settings
 467 #
 468
 469 /**
 470  * Site admin email address
 471  * Default to wikiadmin@SERVER_NAME
 472  * @global string $wgEmergencyContact
 473  */
 474 $wgEmergencyContact = 'wikiadmin@' . $wgServerName;
 475
 476 /**
 477  * Password reminder email address
 478  * The address we should use as sender when a user is requesting his password
 479  * Default to apache@SERVER_NAME
 480  * @global string $wgPasswordSender
 481  */
 482 $wgPasswordSender       = 'MediaWiki Mail <apache@' . $wgServerName . '>';
 483
 484 /**
 485  * dummy address which should be accepted during mail send action
 486  * It might be necessay to adapt the address or to set it equal
 487  * to the $wgEmergencyContact address
 488  */
 489 #$wgNoReplyAddress      = $wgEmergencyContact;
 490 $wgNoReplyAddress       = 'reply@not.possible';
 491
 492 /**
 493  * Set to true to enable the e-mail basic features:
 494  * Password reminders, etc. If sending e-mail on your
 495  * server doesn't work, you might want to disable this.
 496  * @global bool $wgEnableEmail
 497  */
 498 $wgEnableEmail = true;
 499
 500 /**
 501  * Set to true to enable user-to-user e-mail.
 502  * This can potentially be abused, as it's hard to track.
 503  * @global bool $wgEnableUserEmail
 504  */
 505 $wgEnableUserEmail = true;
 506
 507 /**
 508  * Set to true to put the sending user's email in a Reply-To header
 509  * instead of From. ($wgEmergencyContact will be used as From.)
 510  *
 511  * Some mailers (eg sSMTP) set the SMTP envelope sender to the From value,
 512  * which can cause problems with SPF validation and leak recipient addressses
 513  * when bounces are sent to the sender.
 514  */
 515 $wgUserEmailUseReplyTo = false;
 516
 517 /**
 518  * Minimum time, in hours, which must elapse between password reminder
 519  * emails for a given account. This is to prevent abuse by mail flooding.
 520  */
 521 $wgPasswordReminderResendTime = 24;
 522
 523 /**
 524  * SMTP Mode
 525  * For using a direct (authenticated) SMTP server connection.
 526  * Default to false or fill an array :
 527  * <code>
 528  * "host" => 'SMTP domain',
 529  * "IDHost" => 'domain for MessageID',
 530  * "port" => "25",
 531  * "auth" => true/false,
 532  * "username" => user,
 533  * "password" => password
 534  * </code>
 535  *
 536  * @global mixed $wgSMTP
 537  */
 538 $wgSMTP                         = false;
 539
 540
 541 /**#@+
 542  * Database settings
 543  */
 544 /** database host name or ip address */
 545 $wgDBserver         = 'localhost';
 546 /** database port number */
 547 $wgDBport           = '';
 548 /** name of the database */
 549 $wgDBname           = 'wikidb';
 550 /** */
 551 $wgDBconnection     = '';
 552 /** Database username */
 553 $wgDBuser           = 'wikiuser';
 554 /** Database type
 555  */
 556 $wgDBtype           = "mysql";
 557 /** Search type
 558  * Leave as null to select the default search engine for the
 559  * selected database type (eg SearchMySQL4), or set to a class
 560  * name to override to a custom search engine.
 561  */
 562 $wgSearchType       = null;
 563 /** Table name prefix */
 564 $wgDBprefix         = '';
 565 /** MySQL table options to use during installation or update */
 566 $wgDBTableOptions = 'TYPE=InnoDB';
 567
 568 /**#@-*/
 569
 570
 571 /** Live high performance sites should disable this - some checks acquire giant mysql locks */
 572 $wgCheckDBSchema = true;
 573
 574
 575 /**
 576  * Shared database for multiple wikis. Presently used for storing a user table
 577  * for single sign-on. The server for this database must be the same as for the
 578  * main database.
 579  * EXPERIMENTAL
 580  */
 581 $wgSharedDB = null;
 582
 583 /**
 584  * Database load balancer
 585  * This is a two-dimensional array, an array of server info structures
 586  * Fields are:
 587  *   host:        Host name
 588  *   dbname:      Default database name
 589  *   user:        DB user
 590  *   password:    DB password
 591  *   type:        "mysql" or "postgres"
 592  *   load:        ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
 593  *   groupLoads:  array of load ratios, the key is the query group name. A query may belong
 594  *                to several groups, the most specific group defined here is used.
 595  *
 596  *   flags:       bit field
 597  *                   DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
 598  *                   DBO_DEBUG -- equivalent of $wgDebugDumpSql
 599  *                   DBO_TRX -- wrap entire request in a transaction
 600  *                   DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
 601  *                   DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
 602  *
 603  *   max lag:     (optional) Maximum replication lag before a slave will taken out of rotation
 604  *   max threads: (optional) Maximum number of running threads
 605  *
 606  *   These and any other user-defined properties will be assigned to the mLBInfo member
 607  *   variable of the Database object.
 608  *
 609  * Leave at false to use the single-server variables above. If you set this
 610  * variable, the single-server variables will generally be ignored (except
 611  * perhaps in some command-line scripts).
 612  *
 613  * The first server listed in this array (with key 0) will be the master. The
 614  * rest of the servers will be slaves. To prevent writes to your slaves due to
 615  * accidental misconfiguration or MediaWiki bugs, set read_only=1 on all your
 616  * slaves in my.cnf. You can set read_only mode at runtime using:
 617  *
 618  *     SET @@read_only=1;
 619  *
 620  * Since the effect of writing to a slave is so damaging and difficult to clean
 621  * up, we at Wikimedia set read_only=1 in my.cnf on all our DB servers, even
 622  * our masters, and then set read_only=0 on masters at runtime.
 623  */
 624 $wgDBservers            = false;
 625
 626 /**
 627  * Load balancer factory configuration
 628  * To set up a multi-master wiki farm, set the class here to something that
 629  * can return a LoadBalancer with an appropriate master on a call to getMainLB().
 630  * The class identified here is responsible for reading $wgDBservers,
 631  * $wgDBserver, etc., so overriding it may cause those globals to be ignored.
 632  *
 633  * The LBFactory_Multi class is provided for this purpose, please see
 634  * includes/LBFactory_Multi.php for configuration information.
 635  */
 636 $wgLBFactoryConf    = array( 'class' => 'LBFactory_Simple' );
 637
 638 /** How long to wait for a slave to catch up to the master */
 639 $wgMasterWaitTimeout = 10;
 640
 641 /** File to log database errors to */
 642 $wgDBerrorLog           = false;
 643
 644 /** When to give an error message */
 645 $wgDBClusterTimeout = 10;
 646
 647 /**
 648  * Scale load balancer polling time so that under overload conditions, the database server
 649  * receives a SHOW STATUS query at an average interval of this many microseconds
 650  */
 651 $wgDBAvgStatusPoll = 2000;
 652
 653 /**
 654  * wgDBminWordLen :
 655  * MySQL 3.x : used to discard words that MySQL will not return any results for
 656  * shorter values configure mysql directly.
 657  * MySQL 4.x : ignore it and configure mySQL
 658  * See: http://dev.mysql.com/doc/mysql/en/Fulltext_Fine-tuning.html
 659  */
 660 $wgDBminWordLen     = 4;
 661 /** Set to true if using InnoDB tables */
 662 $wgDBtransactions       = false;
 663 /** Set to true for compatibility with extensions that might be checking.
 664  * MySQL 3.23.x is no longer supported. */
 665 $wgDBmysql4                     = true;
 666
 667 /**
 668  * Set to true to engage MySQL 4.1/5.0 charset-related features;
 669  * for now will just cause sending of 'SET NAMES=utf8' on connect.
 670  *
 671  * WARNING: THIS IS EXPERIMENTAL!
 672  *
 673  * May break if you're not using the table defs from mysql5/tables.sql.
 674  * May break if you're upgrading an existing wiki if set differently.
 675  * Broken symptoms likely to include incorrect behavior with page titles,
 676  * usernames, comments etc containing non-ASCII characters.
 677  * Might also cause failures on the object cache and other things.
 678  *
 679  * Even correct usage may cause failures with Unicode supplementary
 680  * characters (those not in the Basic Multilingual Plane) unless MySQL
 681  * has enhanced their Unicode support.
 682  */
 683 $wgDBmysql5                     = false;
 684
 685 /**
 686  * Other wikis on this site, can be administered from a single developer
 687  * account.
 688  * Array numeric key => database name
 689  */
 690 $wgLocalDatabases = array();
 691
 692 /**
 693  * Object cache settings
 694  * See Defines.php for types
 695  */
 696 $wgMainCacheType = CACHE_NONE;
 697 $wgMessageCacheType = CACHE_ANYTHING;
 698 $wgParserCacheType = CACHE_ANYTHING;
 699
 700 $wgParserCacheExpireTime = 86400;
 701
 702 $wgSessionsInMemcached = false;
 703 $wgLinkCacheMemcached = false; # Not fully tested
 704
 705 /**
 706  * Memcached-specific settings
 707  * See docs/memcached.txt
 708  */
 709 $wgUseMemCached     = false;
 710 $wgMemCachedDebug   = false; # Will be set to false in Setup.php, if the server isn't working
 711 $wgMemCachedServers = array( '127.0.0.1:11000' );
 712 $wgMemCachedPersistent = false;
 713
 714 /**
 715  * Directory for local copy of message cache, for use in addition to memcached
 716  */
 717 $wgLocalMessageCache = false;
 718 /**
 719  * Defines format of local cache
 720  * true - Serialized object
 721  * false - PHP source file (Warning - security risk)
 722  */
 723 $wgLocalMessageCacheSerialized = true;
 724
 725 /**
 726  * Directory for compiled constant message array databases
 727  * WARNING: turning anything on will just break things, aaaaaah!!!!
 728  */
 729 $wgCachedMessageArrays = false;
 730
 731 # Language settings
 732 #
 733 /** Site language code, should be one of ./languages/Language(.*).php */
 734 $wgLanguageCode = 'en';
 735
 736 /**
 737  * Some languages need different word forms, usually for different cases.
 738  * Used in Language::convertGrammar().
 739  */
 740 $wgGrammarForms = array();
 741 #$wgGrammarForms['en']['genitive']['car'] = 'car\'s';
 742
 743 /** Treat language links as magic connectors, not inline links */
 744 $wgInterwikiMagic = true;
 745
 746 /** Hide interlanguage links from the sidebar */
 747 $wgHideInterlanguageLinks = false;
 748
 749 /** List of language names or overrides for default names in Names.php */
 750 $wgExtraLanguageNames = array();
 751
 752 /** We speak UTF-8 all the time now, unless some oddities happen */
 753 $wgInputEncoding  = 'UTF-8';
 754 $wgOutputEncoding = 'UTF-8';
 755 $wgEditEncoding   = '';
 756
 757 # Set this to eg 'ISO-8859-1' to perform character set
 758 # conversion when loading old revisions not marked with
 759 # "utf-8" flag. Use this when converting wiki to UTF-8
 760 # without the burdensome mass conversion of old text data.
 761 #
 762 # NOTE! This DOES NOT touch any fields other than old_text.
 763 # Titles, comments, user names, etc still must be converted
 764 # en masse in the database before continuing as a UTF-8 wiki.
 765 $wgLegacyEncoding   = false;
 766
 767 /**
 768  * If set to true, the MediaWiki 1.4 to 1.5 schema conversion will
 769  * create stub reference rows in the text table instead of copying
 770  * the full text of all current entries from 'cur' to 'text'.
 771  *
 772  * This will speed up the conversion step for large sites, but
 773  * requires that the cur table be kept around for those revisions
 774  * to remain viewable.
 775  *
 776  * maintenance/migrateCurStubs.php can be used to complete the
 777  * migration in the background once the wiki is back online.
 778  *
 779  * This option affects the updaters *only*. Any present cur stub
 780  * revisions will be readable at runtime regardless of this setting.
 781  */
 782 $wgLegacySchemaConversion = false;
 783
 784 $wgMimeType                     = 'text/html';
 785 $wgJsMimeType                   = 'text/javascript';
 786 $wgDocType                      = '-//W3C//DTD XHTML 1.0 Transitional//EN';
 787 $wgDTD                          = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
 788 $wgXhtmlDefaultNamespace        = 'http://www.w3.org/1999/xhtml';
 789
 790 # Permit other namespaces in addition to the w3.org default.
 791 # Use the prefix for the key and the namespace for the value. For
 792 # example:
 793 # $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg';
 794 # Normally we wouldn't have to define this in the root <html>
 795 # element, but IE needs it there in some circumstances.
 796 $wgXhtmlNamespaces              = array();
 797
 798 /** Enable to allow rewriting dates in page text.
 799  * DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES */
 800 $wgUseDynamicDates  = false;
 801 /** Enable dates like 'May 12' instead of '12 May', this only takes effect if
 802  * the interface is set to English
 803  */
 804 $wgAmericanDates    = false;
 805 /**
 806  * For Hindi and Arabic use local numerals instead of Western style (0-9)
 807  * numerals in interface.
 808  */
 809 $wgTranslateNumerals = true;
 810
 811 /**
 812  * Translation using MediaWiki: namespace.
 813  * This will increase load times by 25-60% unless memcached is installed.
 814  * Interface messages will be loaded from the database.
 815  */
 816 $wgUseDatabaseMessages = true;
 817
 818 /**
 819  * Expiry time for the message cache key
 820  */
 821 $wgMsgCacheExpiry       = 86400;
 822
 823 /**
 824  * Maximum entry size in the message cache, in bytes
 825  */
 826 $wgMaxMsgCacheEntrySize = 10000;
 827
 828 /**
 829  * Set to false if you are thorough system admin who always remembers to keep
 830  * serialized files up to date to save few mtime calls.
 831  */
 832 $wgCheckSerialized = true;
 833
 834 # Whether to enable language variant conversion.
 835 $wgDisableLangConversion = false;
 836
 837 # Default variant code, if false, the default will be the language code
 838 $wgDefaultLanguageVariant = false;
 839
 840 /**
 841  * Show a bar of language selection links in the user login and user
 842  * registration forms; edit the "loginlanguagelinks" message to
 843  * customise these
 844  */
 845 $wgLoginLanguageSelector = false;
 846
 847 # Whether to use zhdaemon to perform Chinese text processing
 848 # zhdaemon is under developement, so normally you don't want to
 849 # use it unless for testing
 850 $wgUseZhdaemon = false;
 851 $wgZhdaemonHost="localhost";
 852 $wgZhdaemonPort=2004;
 853
 854 /** Normally you can ignore this and it will be something
 855     like $wgMetaNamespace . "_talk". In some languages, you
 856     may want to set this manually for grammatical reasons.
 857     It is currently only respected by those languages
 858     where it might be relevant and where no automatic
 859     grammar converter exists.
 860 */
 861 $wgMetaNamespaceTalk = false;
 862
 863 # Miscellaneous configuration settings
 864 #
 865
 866 $wgLocalInterwiki   = 'w';
 867 $wgInterwikiExpiry = 10800; # Expiry time for cache of interwiki table
 868
 869 /** Interwiki caching settings.
 870         $wgInterwikiCache specifies path to constant database file
 871                 This cdb database is generated by dumpInterwiki from maintenance
 872                 and has such key formats:
 873                         dbname:key - a simple key (e.g. enwiki:meta)
 874                         _sitename:key - site-scope key (e.g. wiktionary:meta)
 875                         __global:key - global-scope key (e.g. __global:meta)
 876                         __sites:dbname - site mapping (e.g. __sites:enwiki)
 877                 Sites mapping just specifies site name, other keys provide
 878                         "local url" data layout.
 879         $wgInterwikiScopes specify number of domains to check for messages:
 880                 1 - Just wiki(db)-level
 881                 2 - wiki and global levels
 882                 3 - site levels
 883         $wgInterwikiFallbackSite - if unable to resolve from cache
 884 */
 885 $wgInterwikiCache = false;
 886 $wgInterwikiScopes = 3;
 887 $wgInterwikiFallbackSite = 'wiki';
 888
 889 /**
 890  * If local interwikis are set up which allow redirects,
 891  * set this regexp to restrict URLs which will be displayed
 892  * as 'redirected from' links.
 893  *
 894  * It might look something like this:
 895  * $wgRedirectSources = '!^https?://[a-z-]+\.wikipedia\.org/!';
 896  *
 897  * Leave at false to avoid displaying any incoming redirect markers.
 898  * This does not affect intra-wiki redirects, which don't change
 899  * the URL.
 900  */
 901 $wgRedirectSources = false;
 902
 903
 904 $wgShowIPinHeader       = true; # For non-logged in users
 905 $wgMaxNameChars         = 255;  # Maximum number of bytes in username
 906 $wgMaxSigChars          = 255;  # Maximum number of Unicode characters in signature
 907 $wgMaxArticleSize       = 2048; # Maximum article size in kilobytes
 908
 909 $wgMaxPPNodeCount = 1000000;  # A complexity limit on template expansion
 910
 911 /**
 912  * Maximum recursion depth for templates within templates.
 913  * The current parser adds two levels to the PHP call stack for each template,
 914  * and xdebug limits the call stack to 100 by default. So this should hopefully
 915  * stop the parser before it hits the xdebug limit.
 916  */
 917 $wgMaxTemplateDepth = 40;
 918 $wgMaxPPExpandDepth = 40;
 919
 920 $wgExtraSubtitle        = '';
 921 $wgSiteSupportPage      = ''; # A page where you users can receive donations
 922
 923 /***
 924  * If this lock file exists, the wiki will be forced into read-only mode.
 925  * Its contents will be shown to users as part of the read-only warning
 926  * message.
 927  */
 928 $wgReadOnlyFile         = false; /// defaults to "{$wgUploadDirectory}/lock_yBgMBwiR";
 929
 930 /**
 931  * The debug log file should be not be publicly accessible if it is used, as it
 932  * may contain private data. */
 933 $wgDebugLogFile         = '';
 934
 935 /**#@+
 936  * @global bool
 937  */
 938 $wgDebugRedirects               = false;
 939 $wgDebugRawPage         = false; # Avoid overlapping debug entries by leaving out CSS
 940
 941 $wgDebugComments        = false;
 942 $wgReadOnly             = null;
 943 $wgLogQueries           = false;
 944
 945 /**
 946  * Write SQL queries to the debug log
 947  */
 948 $wgDebugDumpSql         = false;
 949
 950 /**
 951  * Set to an array of log group keys to filenames.
 952  * If set, wfDebugLog() output for that group will go to that file instead
 953  * of the regular $wgDebugLogFile. Useful for enabling selective logging
 954  * in production.
 955  */
 956 $wgDebugLogGroups       = array();
 957
 958 /**
 959  * Whether to show "we're sorry, but there has been a database error" pages.
 960  * Displaying errors aids in debugging, but may display information useful
 961  * to an attacker.
 962  */
 963 $wgShowSQLErrors        = false;
 964
 965 /**
 966  * If true, some error messages will be colorized when running scripts on the
 967  * command line; this can aid picking important things out when debugging.
 968  * Ignored when running on Windows or when output is redirected to a file.
 969  */
 970 $wgColorErrors          = true;
 971
 972 /**
 973  * If set to true, uncaught exceptions will print a complete stack trace
 974  * to output. This should only be used for debugging, as it may reveal
 975  * private information in function parameters due to PHP's backtrace
 976  * formatting.
 977  */
 978 $wgShowExceptionDetails = false;
 979
 980 /**
 981  * Expose backend server host names through the API and various HTML comments
 982  */
 983 $wgShowHostnames = false;
 984
 985 /**
 986  * Use experimental, DMOZ-like category browser
 987  */
 988 $wgUseCategoryBrowser   = false;
 989
 990 /**
 991  * Keep parsed pages in a cache (objectcache table, turck, or memcached)
 992  * to speed up output of the same page viewed by another user with the
 993  * same options.
 994  *
 995  * This can provide a significant speedup for medium to large pages,
 996  * so you probably want to keep it on.
 997  */
 998 $wgEnableParserCache = true;
 999
1000 /**
1001  * If on, the sidebar navigation links are cached for users with the
1002  * current language set. This can save a touch of load on a busy site
1003  * by shaving off extra message lookups.
1004  *
1005  * However it is also fragile: changing the site configuration, or
1006  * having a variable $wgArticlePath, can produce broken links that
1007  * don't update as expected.
1008  */
1009 $wgEnableSidebarCache = false;
1010
1011 /**
1012  * Expiry time for the sidebar cache, in seconds
1013  */
1014 $wgSidebarCacheExpiry = 86400;
1015
1016 /**
1017  * Under which condition should a page in the main namespace be counted
1018  * as a valid article? If $wgUseCommaCount is set to true, it will be
1019  * counted if it contains at least one comma. If it is set to false
1020  * (default), it will only be counted if it contains at least one [[wiki
1021  * link]]. See http://meta.wikimedia.org/wiki/Help:Article_count
1022  *
1023  * Retroactively changing this variable will not affect
1024  * the existing count (cf. maintenance/recount.sql).
1025 */
1026 $wgUseCommaCount = false;
1027
1028 /**#@-*/
1029
1030 /**
1031  * wgHitcounterUpdateFreq sets how often page counters should be updated, higher
1032  * values are easier on the database. A value of 1 causes the counters to be
1033  * updated on every hit, any higher value n cause them to update *on average*
1034  * every n hits. Should be set to either 1 or something largish, eg 1000, for
1035  * maximum efficiency.
1036 */
1037 $wgHitcounterUpdateFreq = 1;
1038
1039 # Basic user rights and block settings
1040 $wgSysopUserBans        = true; # Allow sysops to ban logged-in users
1041 $wgSysopRangeBans       = true; # Allow sysops to ban IP ranges
1042 $wgAutoblockExpiry      = 86400; # Number of seconds before autoblock entries expire
1043 $wgBlockAllowsUTEdit    = false; # Blocks allow users to edit their own user talk page
1044 $wgSysopEmailBans       = true; # Allow sysops to ban users from accessing Emailuser
1045
1046 # Pages anonymous user may see as an array, e.g.:
1047 # array ( "Main Page", "Wikipedia:Help");
1048 # Special:Userlogin and Special:Resetpass are always whitelisted.
1049 # NOTE: This will only work if $wgGroupPermissions['*']['read']
1050 # is false -- see below. Otherwise, ALL pages are accessible,
1051 # regardless of this setting.
1052 # Also note that this will only protect _pages in the wiki_.
1053 # Uploaded files will remain readable. Make your upload
1054 # directory name unguessable, or use .htaccess to protect it.
1055 $wgWhitelistRead = false;
1056
1057 /**
1058  * Should editors be required to have a validated e-mail
1059  * address before being allowed to edit?
1060  */
1061 $wgEmailConfirmToEdit=false;
1062
1063 /**
1064  * Permission keys given to users in each group.
1065  * All users are implicitly in the '*' group including anonymous visitors;
1066  * logged-in users are all implicitly in the 'user' group. These will be
1067  * combined with the permissions of all groups that a given user is listed
1068  * in in the user_groups table.
1069  *
1070  * Note: Don't set $wgGroupPermissions = array(); unless you know what you're
1071  * doing! This will wipe all permissions, and may mean that your users are
1072  * unable to perform certain essential tasks or access new functionality
1073  * when new permissions are introduced and default grants established.
1074  *
1075  * Functionality to make pages inaccessible has not been extensively tested
1076  * for security. Use at your own risk!
1077  *
1078  * This replaces wgWhitelistAccount and wgWhitelistEdit
1079  */
1080 $wgGroupPermissions = array();
1081
1082 // Implicit group for all visitors
1083 $wgGroupPermissions['*'    ]['createaccount']    = true;
1084 $wgGroupPermissions['*'    ]['read']             = true;
1085 $wgGroupPermissions['*'    ]['edit']             = true;
1086 $wgGroupPermissions['*'    ]['createpage']       = true;
1087 $wgGroupPermissions['*'    ]['createtalk']       = true;
1088
1089 // Implicit group for all logged-in accounts
1090 $wgGroupPermissions['user' ]['move']             = true;
1091 $wgGroupPermissions['user' ]['read']             = true;
1092 $wgGroupPermissions['user' ]['edit']             = true;
1093 $wgGroupPermissions['user' ]['createpage']       = true;
1094 $wgGroupPermissions['user' ]['createtalk']       = true;
1095 $wgGroupPermissions['user' ]['upload']           = true;
1096 $wgGroupPermissions['user' ]['reupload']         = true;
1097 $wgGroupPermissions['user' ]['reupload-shared']  = true;
1098 $wgGroupPermissions['user' ]['minoredit']        = true;
1099 $wgGroupPermissions['user' ]['purge']            = true; // can use ?action=purge without clicking "ok"
1100
1101 // Implicit group for accounts that pass $wgAutoConfirmAge
1102 $wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true;
1103
1104 // Implicit group for accounts with confirmed email addresses
1105 // This has little use when email address confirmation is off
1106 $wgGroupPermissions['emailconfirmed']['emailconfirmed'] = true;
1107
1108 // Users with bot privilege can have their edits hidden
1109 // from various log pages by default
1110 $wgGroupPermissions['bot'  ]['bot']              = true;
1111 $wgGroupPermissions['bot'  ]['autoconfirmed']    = true;
1112 $wgGroupPermissions['bot'  ]['nominornewtalk']   = true;
1113 $wgGroupPermissions['bot'  ]['autopatrol']       = true;
1114 $wgGroupPermissions['bot'  ]['suppressredirect'] = true;
1115 $wgGroupPermissions['bot'  ]['apihighlimits']    = true;
1116 #$wgGroupPermissions['bot'  ]['editprotected']    = true; // can edit all protected pages without cascade protection enabled
1117
1118 // Most extra permission abilities go to this group
1119 $wgGroupPermissions['sysop']['block']            = true;
1120 $wgGroupPermissions['sysop']['createaccount']    = true;
1121 $wgGroupPermissions['sysop']['delete']           = true;
1122 $wgGroupPermissions['sysop']['bigdelete']        = true; // can be separately configured for pages with > $wgDeleteRevisionsLimit revs
1123 $wgGroupPermissions['sysop']['deletedhistory']   = true; // can view deleted history entries, but not see or restore the text
1124 $wgGroupPermissions['sysop']['undelete']         = true;
1125 $wgGroupPermissions['sysop']['editinterface']    = true;
1126 $wgGroupPermissions['sysop']['editusercssjs']    = true;
1127 $wgGroupPermissions['sysop']['import']           = true;
1128 $wgGroupPermissions['sysop']['importupload']     = true;
1129 $wgGroupPermissions['sysop']['move']             = true;
1130 $wgGroupPermissions['sysop']['patrol']           = true;
1131 $wgGroupPermissions['sysop']['autopatrol']       = true;
1132 $wgGroupPermissions['sysop']['protect']          = true;
1133 $wgGroupPermissions['sysop']['proxyunbannable']  = true;
1134 $wgGroupPermissions['sysop']['rollback']         = true;
1135 $wgGroupPermissions['sysop']['trackback']        = true;
1136 $wgGroupPermissions['sysop']['upload']           = true;
1137 $wgGroupPermissions['sysop']['reupload']         = true;
1138 $wgGroupPermissions['sysop']['reupload-shared']  = true;
1139 $wgGroupPermissions['sysop']['unwatchedpages']   = true;
1140 $wgGroupPermissions['sysop']['autoconfirmed']    = true;
1141 $wgGroupPermissions['sysop']['upload_by_url']    = true;
1142 $wgGroupPermissions['sysop']['ipblock-exempt']   = true;
1143 $wgGroupPermissions['sysop']['blockemail']       = true;
1144 $wgGroupPermissions['sysop']['markbotedits']     = true;
1145 $wgGroupPermissions['sysop']['suppressredirect'] = true;
1146 $wgGroupPermissions['sysop']['apihighlimits']    = true;
1147 $wgGroupPermissions['sysop']['browsearchive']    = true;
1148 #$wgGroupPermissions['sysop']['mergehistory']     = true;
1149
1150 // Permission to change users' group assignments
1151 $wgGroupPermissions['bureaucrat']['userrights']  = true;
1152 // Permission to change users' groups assignments across wikis
1153 #$wgGroupPermissions['bureaucrat']['userrights-interwiki'] = true;
1154
1155 // Experimental permissions, not ready for production use
1156 //$wgGroupPermissions['sysop']['deleterevision'] = true;
1157 //$wgGroupPermissions['bureaucrat']['hiderevision'] = true;
1158
1159 /**
1160  * The developer group is deprecated, but can be activated if need be
1161  * to use the 'lockdb' and 'unlockdb' special pages. Those require
1162  * that a lock file be defined and creatable/removable by the web
1163  * server.
1164  */
1165 # $wgGroupPermissions['developer']['siteadmin'] = true;
1166
1167
1168 /**
1169  * Implicit groups, aren't shown on Special:Listusers or somewhere else
1170  */
1171 $wgImplicitGroups = array( '*', 'user', 'autoconfirmed', 'emailconfirmed' );
1172
1173 /**
1174  * These are the groups that users are allowed to add to or remove from
1175  * their own account via Special:Userrights.
1176  */
1177 $wgGroupsAddToSelf = array();
1178 $wgGroupsRemoveFromSelf = array();
1179
1180 /**
1181  * Set of available actions that can be restricted via action=protect
1182  * You probably shouldn't change this.
1183  * Translated trough restriction-* messages.
1184  */
1185 $wgRestrictionTypes = array( 'edit', 'move' );
1186
1187 /**
1188  * Rights which can be required for each protection level (via action=protect)
1189  *
1190  * You can add a new protection level that requires a specific
1191  * permission by manipulating this array. The ordering of elements
1192  * dictates the order on the protection form's lists.
1193  *
1194  * '' will be ignored (i.e. unprotected)
1195  * 'sysop' is quietly rewritten to 'protect' for backwards compatibility
1196  */
1197 $wgRestrictionLevels = array( '', 'autoconfirmed', 'sysop' );
1198
1199 /**
1200  * Set the minimum permissions required to edit pages in each
1201  * namespace.  If you list more than one permission, a user must
1202  * have all of them to edit pages in that namespace.
1203  */
1204 $wgNamespaceProtection = array();
1205 $wgNamespaceProtection[ NS_MEDIAWIKI ] = array( 'editinterface' );
1206
1207 /**
1208 * Pages in namespaces in this array can not be used as templates.
1209 * Elements must be numeric namespace ids.
1210 * Among other things, this may be useful to enforce read-restrictions
1211 * which may otherwise be bypassed by using the template machanism.
1212 */
1213 $wgNonincludableNamespaces = array();
1214
1215 /**
1216  * Number of seconds an account is required to age before
1217  * it's given the implicit 'autoconfirm' group membership.
1218  * This can be used to limit privileges of new accounts.
1219  *
1220  * Accounts created by earlier versions of the software
1221  * may not have a recorded creation date, and will always
1222  * be considered to pass the age test.
1223  *
1224  * When left at 0, all registered accounts will pass.
1225  */
1226 $wgAutoConfirmAge = 0;
1227 //$wgAutoConfirmAge = 600;     // ten minutes
1228 //$wgAutoConfirmAge = 3600*24; // one day
1229
1230 # Number of edits an account requires before it is autoconfirmed
1231 # Passing both this AND the time requirement is needed
1232 $wgAutoConfirmCount = 0;
1233 //$wgAutoConfirmCount = 50;
1234
1235 /**
1236  * Automatically add a usergroup to any user who matches certain conditions.
1237  * The format is
1238  *   array( '&' or '|' or '^', cond1, cond2, ... )
1239  * where cond1, cond2, ... are themselves conditions; *OR*
1240  *   APCOND_EMAILCONFIRMED, *OR*
1241  *   array( APCOND_EMAILCONFIRMED ), *OR*
1242  *   array( APCOND_EDITCOUNT, number of edits ), *OR*
1243  *   array( APCOND_AGE, seconds since registration ), *OR*
1244  *   similar constructs defined by extensions.
1245  *
1246  * If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any
1247  * user who has provided an e-mail address.
1248  */
1249 $wgAutopromote = array(
1250         'autoconfirmed' => array( '&',
1251                 array( APCOND_EDITCOUNT, &$wgAutoConfirmCount ),
1252                 array( APCOND_AGE, &$wgAutoConfirmAge ),
1253         ),
1254         'emailconfirmed' => APCOND_EMAILCONFIRMED,
1255 );
1256
1257 /**
1258  * These settings can be used to give finer control over who can assign which
1259  * groups at Special:Userrights.  Example configuration:
1260  *
1261  * // Bureaucrat can add any group
1262  * $wgAddGroups['bureaucrat'] = true;
1263  * // Bureaucrats can only remove bots and sysops
1264  * $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' );
1265  * // Sysops can make bots
1266  * $wgAddGroups['sysop'] = array( 'bot' );
1267  * // Sysops can disable other sysops in an emergency, and disable bots
1268  * $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' );
1269  */
1270 $wgAddGroups = $wgRemoveGroups = array();
1271
1272 /**
1273  * Optional to restrict deletion of pages with higher revision counts
1274  * to users with the 'bigdelete' permission. (Default given to sysops.)
1275  */
1276 $wgDeleteRevisionsLimit = 0;
1277
1278 # Proxy scanner settings
1279 #
1280
1281 /**
1282  * If you enable this, every editor's IP address will be scanned for open HTTP
1283  * proxies.
1284  *
1285  * Don't enable this. Many sysops will report "hostile TCP port scans" to your
1286  * ISP and ask for your server to be shut down.
1287  *
1288  * You have been warned.
1289  */
1290 $wgBlockOpenProxies = false;
1291 /** Port we want to scan for a proxy */
1292 $wgProxyPorts = array( 80, 81, 1080, 3128, 6588, 8000, 8080, 8888, 65506 );
1293 /** Script used to scan */
1294 $wgProxyScriptPath = "$IP/includes/proxy_check.php";
1295 /** */
1296 $wgProxyMemcExpiry = 86400;
1297 /** This should always be customised in LocalSettings.php */
1298 $wgSecretKey = false;
1299 /** big list of banned IP addresses, in the keys not the values */
1300 $wgProxyList = array();
1301 /** deprecated */
1302 $wgProxyKey = false;
1303
1304 /** Number of accounts each IP address may create, 0 to disable.
1305  * Requires memcached */
1306 $wgAccountCreationThrottle = 0;
1307
1308 # Client-side caching:
1309
1310 /** Allow client-side caching of pages */
1311 $wgCachePages       = true;
1312
1313 /**
1314  * Set this to current time to invalidate all prior cached pages. Affects both
1315  * client- and server-side caching.
1316  * You can get the current date on your server by using the command:
1317  *   date +%Y%m%d%H%M%S
1318  */
1319 $wgCacheEpoch = '20030516000000';
1320
1321 /**
1322  * Bump this number when changing the global style sheets and JavaScript.
1323  * It should be appended in the query string of static CSS and JS includes,
1324  * to ensure that client-side caches don't keep obsolete copies of global
1325  * styles.
1326  */
1327 $wgStyleVersion = '129';
1328
1329
1330 # Server-side caching:
1331
1332 /**
1333  * This will cache static pages for non-logged-in users to reduce
1334  * database traffic on public sites.
1335  * Must set $wgShowIPinHeader = false
1336  */
1337 $wgUseFileCache = false;
1338
1339 /** Directory where the cached page will be saved */
1340 $wgFileCacheDirectory = false; /// defaults to "{$wgUploadDirectory}/cache";
1341
1342 /**
1343  * When using the file cache, we can store the cached HTML gzipped to save disk
1344  * space. Pages will then also be served compressed to clients that support it.
1345  * THIS IS NOT COMPATIBLE with ob_gzhandler which is now enabled if supported in
1346  * the default LocalSettings.php! If you enable this, remove that setting first.
1347  *
1348  * Requires zlib support enabled in PHP.
1349  */
1350 $wgUseGzip = false;
1351
1352 /** Whether MediaWiki should send an ETag header */
1353 $wgUseETag = false;
1354
1355 # Email notification settings
1356 #
1357
1358 /** For email notification on page changes */
1359 $wgPasswordSender = $wgEmergencyContact;
1360
1361 # true: from page editor if s/he opted-in
1362 # false: Enotif mails appear to come from $wgEmergencyContact
1363 $wgEnotifFromEditor     = false;
1364
1365 // TODO move UPO to preferences probably ?
1366 # If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion
1367 # If set to false, the corresponding input form on the user preference page is suppressed
1368 # It call this to be a "user-preferences-option (UPO)"
1369 $wgEmailAuthentication                          = true; # UPO (if this is set to false, texts referring to authentication are suppressed)
1370 $wgEnotifWatchlist              = false; # UPO
1371 $wgEnotifUserTalk               = false;        # UPO
1372 $wgEnotifRevealEditorAddress    = false;        # UPO; reply-to address may be filled with page editor's address (if user allowed this in the preferences)
1373 $wgEnotifMinorEdits             = true; # UPO; false: "minor edits" on pages do not trigger notification mails.
1374 #                                                       # Attention: _every_ change on a user_talk page trigger a notification mail (if the user is not yet notified)
1375
1376 # Send a generic mail instead of a personalised mail for each user.  This
1377 # always uses UTC as the time zone, and doesn't include the username.
1378 #
1379 # For pages with many users watching, this can significantly reduce mail load.
1380 # Has no effect when using sendmail rather than SMTP;
1381
1382 $wgEnotifImpersonal = false;
1383
1384 # Maximum number of users to mail at once when using impersonal mail.  Should
1385 # match the limit on your mail server.
1386 $wgEnotifMaxRecips = 500;
1387
1388 # Send mails via the job queue.
1389 $wgEnotifUseJobQ = false;
1390
1391 /**
1392  * Array of usernames who will be sent a notification email for every change which occurs on a wiki
1393  */
1394 $wgUsersNotifedOnAllChanges = array();
1395
1396 /** Show watching users in recent changes, watchlist and page history views */
1397 $wgRCShowWatchingUsers                          = false; # UPO
1398 /** Show watching users in Page views */
1399 $wgPageShowWatchingUsers                        = false;
1400 /** Show the amount of changed characters in recent changes */
1401 $wgRCShowChangedSize                            = true;
1402
1403 /**
1404  * If the difference between the character counts of the text
1405  * before and after the edit is below that value, the value will be
1406  * highlighted on the RC page.
1407  */
1408 $wgRCChangedSizeThreshold                       = -500;
1409
1410 /**
1411  * Show "Updated (since my last visit)" marker in RC view, watchlist and history
1412  * view for watched pages with new changes */
1413 $wgShowUpdatedMarker                            = true;
1414
1415 $wgCookieExpiration = 2592000;
1416
1417 /** Clock skew or the one-second resolution of time() can occasionally cause cache
1418  * problems when the user requests two pages within a short period of time. This
1419  * variable adds a given number of seconds to vulnerable timestamps, thereby giving
1420  * a grace period.
1421  */
1422 $wgClockSkewFudge = 5;
1423
1424 # Squid-related settings
1425 #
1426
1427 /** Enable/disable Squid */
1428 $wgUseSquid = false;
1429
1430 /** If you run Squid3 with ESI support, enable this (default:false): */
1431 $wgUseESI = false;
1432
1433 /** Internal server name as known to Squid, if different */
1434 # $wgInternalServer = 'http://yourinternal.tld:8000';
1435 $wgInternalServer = $wgServer;
1436
1437 /**
1438  * Cache timeout for the squid, will be sent as s-maxage (without ESI) or
1439  * Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in
1440  * the Squid config. 18000 seconds = 5 hours, more cache hits with 2678400 = 31
1441  * days
1442  */
1443 $wgSquidMaxage = 18000;
1444
1445 /**
1446  * Default maximum age for raw CSS/JS accesses
1447  */
1448 $wgForcedRawSMaxage = 300;
1449
1450 /**
1451  * List of proxy servers to purge on changes; default port is 80. Use IP addresses.
1452  *
1453  * When MediaWiki is running behind a proxy, it will trust X-Forwarded-For
1454  * headers sent/modified from these proxies when obtaining the remote IP address
1455  *
1456  * For a list of trusted servers which *aren't* purged, see $wgSquidServersNoPurge.
1457  */
1458 $wgSquidServers = array();
1459
1460 /**
1461  * As above, except these servers aren't purged on page changes; use to set a
1462  * list of trusted proxies, etc.
1463  */
1464 $wgSquidServersNoPurge = array();
1465
1466 /** Maximum number of titles to purge in any one client operation */
1467 $wgMaxSquidPurgeTitles = 400;
1468
1469 /** HTCP multicast purging */
1470 $wgHTCPPort = 4827;
1471 $wgHTCPMulticastTTL = 1;
1472 # $wgHTCPMulticastAddress = "224.0.0.85";
1473 $wgHTCPMulticastAddress = false;
1474
1475 # Cookie settings:
1476 #
1477 /**
1478  * Set to set an explicit domain on the login cookies eg, "justthis.domain. org"
1479  * or ".any.subdomain.net"
1480  */
1481 $wgCookieDomain = '';
1482 $wgCookiePath = '/';
1483 $wgCookieSecure = ($wgProto == 'https');
1484 $wgDisableCookieCheck = false;
1485
1486 /** Override to customise the session name */
1487 $wgSessionName = false;
1488
1489 /**  Whether to allow inline image pointing to other websites */
1490 $wgAllowExternalImages = false;
1491
1492 /** If the above is false, you can specify an exception here. Image URLs
1493   * that start with this string are then rendered, while all others are not.
1494   * You can use this to set up a trusted, simple repository of images.
1495   *
1496   * Example:
1497   * $wgAllowExternalImagesFrom = 'http://127.0.0.1/';
1498   */
1499 $wgAllowExternalImagesFrom = '';
1500
1501 /** Disable database-intensive features */
1502 $wgMiserMode = false;
1503 /** Disable all query pages if miser mode is on, not just some */
1504 $wgDisableQueryPages = false;
1505 /** Number of rows to cache in 'querycache' table when miser mode is on */
1506 $wgQueryCacheLimit = 1000;
1507 /** Number of links to a page required before it is deemed "wanted" */
1508 $wgWantedPagesThreshold = 1;
1509 /** Enable slow parser functions */
1510 $wgAllowSlowParserFunctions = false;
1511
1512 /**
1513  * Maps jobs to their handling classes; extensions
1514  * can add to this to provide custom jobs
1515  */
1516 $wgJobClasses = array(
1517         'refreshLinks' => 'RefreshLinksJob',
1518         'htmlCacheUpdate' => 'HTMLCacheUpdateJob',
1519         'html_cache_update' => 'HTMLCacheUpdateJob', // backwards-compatible
1520         'sendMail' => 'EmaillingJob',
1521         'enotifNotify' => 'EnotifNotifyJob',
1522 );
1523
1524 /**
1525  * To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory of
1526  * the MediaWiki package and have latex, dvips, gs (ghostscript), andconvert
1527  * (ImageMagick) installed and available in the PATH.
1528  * Please see math/README for more information.
1529  */
1530 $wgUseTeX = false;
1531 /** Location of the texvc binary */
1532 $wgTexvc = './math/texvc';
1533
1534 #
1535 # Profiling / debugging
1536 #
1537 # You have to create a 'profiling' table in your database before using
1538 # profiling see maintenance/archives/patch-profiling.sql .
1539 #
1540 # To enable profiling, edit StartProfiler.php
1541
1542 /** Only record profiling info for pages that took longer than this */
1543 $wgProfileLimit = 0.0;
1544 /** Don't put non-profiling info into log file */
1545 $wgProfileOnly = false;
1546 /** Log sums from profiling into "profiling" table in db. */
1547 $wgProfileToDatabase = false;
1548 /** If true, print a raw call tree instead of per-function report */
1549 $wgProfileCallTree = false;
1550 /** Should application server host be put into profiling table */
1551 $wgProfilePerHost = false;
1552
1553 /** Settings for UDP profiler */
1554 $wgUDPProfilerHost = '127.0.0.1';
1555 $wgUDPProfilerPort = '3811';
1556
1557 /** Detects non-matching wfProfileIn/wfProfileOut calls */
1558 $wgDebugProfiling = false;
1559 /** Output debug message on every wfProfileIn/wfProfileOut */
1560 $wgDebugFunctionEntry = 0;
1561 /** Lots of debugging output from SquidUpdate.php */
1562 $wgDebugSquid = false;
1563
1564 /*
1565  * Destination for wfIncrStats() data...
1566  * 'cache' to go into the system cache, if enabled (memcached)
1567  * 'udp' to be sent to the UDP profiler (see $wgUDPProfilerHost)
1568  * false to disable
1569  */
1570 $wgStatsMethod = 'cache';
1571
1572 /** Whereas to count the number of time an article is viewed.
1573  * Does not work if pages are cached (for example with squid).
1574  */
1575 $wgDisableCounters = false;
1576
1577 $wgDisableTextSearch = false;
1578 $wgDisableSearchContext = false;
1579 /**
1580  * If you've disabled search semi-permanently, this also disables updates to the
1581  * table. If you ever re-enable, be sure to rebuild the search table.
1582  */
1583 $wgDisableSearchUpdate = false;
1584 /** Uploads have to be specially set up to be secure */
1585 $wgEnableUploads = false;
1586 /**
1587  * Show EXIF data, on by default if available.
1588  * Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php
1589  *
1590  * NOTE FOR WINDOWS USERS:
1591  * To enable EXIF functions, add the folloing lines to the
1592  * "Windows extensions" section of php.ini:
1593  *
1594  * extension=extensions/php_mbstring.dll
1595  * extension=extensions/php_exif.dll
1596  */
1597 $wgShowEXIF = function_exists( 'exif_read_data' );
1598
1599 /**
1600  * Set to true to enable the upload _link_ while local uploads are disabled.
1601  * Assumes that the special page link will be bounced to another server where
1602  * uploads do work.
1603  */
1604 $wgRemoteUploads = false;
1605 $wgDisableAnonTalk = false;
1606 /**
1607  * Do DELETE/INSERT for link updates instead of incremental
1608  */
1609 $wgUseDumbLinkUpdate = false;
1610
1611 /**
1612  * Anti-lock flags - bitfield
1613  *   ALF_PRELOAD_LINKS
1614  *       Preload links during link update for save
1615  *   ALF_PRELOAD_EXISTENCE
1616  *       Preload cur_id during replaceLinkHolders
1617  *   ALF_NO_LINK_LOCK
1618  *       Don't use locking reads when updating the link table. This is
1619  *       necessary for wikis with a high edit rate for performance
1620  *       reasons, but may cause link table inconsistency
1621  *   ALF_NO_BLOCK_LOCK
1622  *       As for ALF_LINK_LOCK, this flag is a necessity for high-traffic
1623  *       wikis.
1624  */
1625 $wgAntiLockFlags = 0;
1626
1627 /**
1628  * Path to the GNU diff3 utility. If the file doesn't exist, edit conflicts will
1629  * fall back to the old behaviour (no merging).
1630  */
1631 $wgDiff3 = '/usr/bin/diff3';
1632
1633 /**
1634  * We can also compress text stored in the 'text' table. If this is set on, new
1635  * revisions will be compressed on page save if zlib support is available. Any
1636  * compressed revisions will be decompressed on load regardless of this setting
1637  * *but will not be readable at all* if zlib support is not available.
1638  */
1639 $wgCompressRevisions = false;
1640
1641 /**
1642  * This is the list of preferred extensions for uploading files. Uploading files
1643  * with extensions not in this list will trigger a warning.
1644  */
1645 $wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg' );
1646
1647 /** Files with these extensions will never be allowed as uploads. */
1648 $wgFileBlacklist = array(
1649         # HTML may contain cookie-stealing JavaScript and web bugs
1650         'html', 'htm', 'js', 'jsb', 'mhtml', 'mht',
1651         # PHP scripts may execute arbitrary code on the server
1652         'php', 'phtml', 'php3', 'php4', 'php5', 'phps',
1653         # Other types that may be interpreted by some servers
1654         'shtml', 'jhtml', 'pl', 'py', 'cgi',
1655         # May contain harmful executables for Windows victims
1656         'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' );
1657
1658 /** Files with these mime types will never be allowed as uploads
1659  * if $wgVerifyMimeType is enabled.
1660  */
1661 $wgMimeTypeBlacklist= array(
1662         # HTML may contain cookie-stealing JavaScript and web bugs
1663         'text/html', 'text/javascript', 'text/x-javascript',  'application/x-shellscript',
1664         # PHP scripts may execute arbitrary code on the server
1665         'application/x-php', 'text/x-php',
1666         # Other types that may be interpreted by some servers
1667         'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh',
1668         # Windows metafile, client-side vulnerability on some systems
1669         'application/x-msmetafile'
1670 );
1671
1672 /** This is a flag to determine whether or not to check file extensions on upload. */
1673 $wgCheckFileExtensions = true;
1674
1675 /**
1676  * If this is turned off, users may override the warning for files not covered
1677  * by $wgFileExtensions.
1678  */
1679 $wgStrictFileExtensions = true;
1680
1681 /** Warn if uploaded files are larger than this (in bytes), or false to disable*/
1682 $wgUploadSizeWarning = false;
1683
1684 /** For compatibility with old installations set to false */
1685 $wgPasswordSalt = true;
1686
1687 /** Which namespaces should support subpages?
1688  * See Language.php for a list of namespaces.
1689  */
1690 $wgNamespacesWithSubpages = array(
1691         NS_TALK           => true,
1692         NS_USER           => true,
1693         NS_USER_TALK      => true,
1694         NS_PROJECT_TALK   => true,
1695         NS_IMAGE_TALK     => true,
1696         NS_MEDIAWIKI_TALK => true,
1697         NS_TEMPLATE_TALK  => true,
1698         NS_HELP_TALK      => true,
1699         NS_CATEGORY_TALK  => true
1700 );
1701
1702 $wgNamespacesToBeSearchedDefault = array(
1703         NS_MAIN           => true,
1704 );
1705
1706 /**
1707  * Site notice shown at the top of each page
1708  *
1709  * This message can contain wiki text, and can also be set through the
1710  * MediaWiki:Sitenotice page. You can also provide a separate message for
1711  * logged-out users using the MediaWiki:Anonnotice page.
1712  */
1713 $wgSiteNotice = '';
1714
1715 #
1716 # Images settings
1717 #
1718
1719 /**
1720  * Plugins for media file type handling.
1721  * Each entry in the array maps a MIME type to a class name
1722  */
1723 $wgMediaHandlers = array(
1724         'image/jpeg' => 'BitmapHandler',
1725         'image/png' => 'BitmapHandler',
1726         'image/gif' => 'BitmapHandler',
1727         'image/x-ms-bmp' => 'BmpHandler',
1728         'image/x-bmp' => 'BmpHandler',
1729         'image/svg+xml' => 'SvgHandler', // official
1730         'image/svg' => 'SvgHandler', // compat
1731         'image/vnd.djvu' => 'DjVuHandler', // official
1732         'image/x.djvu' => 'DjVuHandler', // compat
1733         'image/x-djvu' => 'DjVuHandler', // compat
1734 );
1735
1736
1737 /**
1738  * Resizing can be done using PHP's internal image libraries or using
1739  * ImageMagick or another third-party converter, e.g. GraphicMagick.
1740  * These support more file formats than PHP, which only supports PNG,
1741  * GIF, JPG, XBM and WBMP.
1742  *
1743  * Use Image Magick instead of PHP builtin functions.
1744  */
1745 $wgUseImageMagick               = false;
1746 /** The convert command shipped with ImageMagick */
1747 $wgImageMagickConvertCommand    = '/usr/bin/convert';
1748
1749 /** Sharpening parameter to ImageMagick */
1750 $wgSharpenParameter = '0x0.4';
1751
1752 /** Reduction in linear dimensions below which sharpening will be enabled */
1753 $wgSharpenReductionThreshold = 0.85;
1754
1755 /**
1756  * Use another resizing converter, e.g. GraphicMagick
1757  * %s will be replaced with the source path, %d with the destination
1758  * %w and %h will be replaced with the width and height
1759  *
1760  * An example is provided for GraphicMagick
1761  * Leave as false to skip this
1762  */
1763 #$wgCustomConvertCommand = "gm convert %s -resize %wx%h %d"
1764 $wgCustomConvertCommand = false;
1765
1766 # Scalable Vector Graphics (SVG) may be uploaded as images.
1767 # Since SVG support is not yet standard in browsers, it is
1768 # necessary to rasterize SVGs to PNG as a fallback format.
1769 #
1770 # An external program is required to perform this conversion:
1771 $wgSVGConverters = array(
1772         'ImageMagick' => '$path/convert -background white -geometry $width $input PNG:$output',
1773         'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
1774         'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
1775         'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input',
1776         'rsvg' => '$path/rsvg -w$width -h$height $input $output',
1777         );
1778 /** Pick one of the above */
1779 $wgSVGConverter = 'ImageMagick';
1780 /** If not in the executable PATH, specify */
1781 $wgSVGConverterPath = '';
1782 /** Don't scale a SVG larger than this */
1783 $wgSVGMaxSize = 1024;
1784 /**
1785  * Don't thumbnail an image if it will use too much working memory
1786  * Default is 50 MB if decompressed to RGBA form, which corresponds to
1787  * 12.5 million pixels or 3500x3500
1788  */
1789 $wgMaxImageArea = 1.25e7;
1790 /**
1791  * If rendered thumbnail files are older than this timestamp, they
1792  * will be rerendered on demand as if the file didn't already exist.
1793  * Update if there is some need to force thumbs and SVG rasterizations
1794  * to rerender, such as fixes to rendering bugs.
1795  */
1796 $wgThumbnailEpoch = '20030516000000';
1797
1798 /**
1799  * If set, inline scaled images will still produce <img> tags ready for
1800  * output instead of showing an error message.
1801  *
1802  * This may be useful if errors are transitory, especially if the site
1803  * is configured to automatically render thumbnails on request.
1804  *
1805  * On the other hand, it may obscure error conditions from debugging.
1806  * Enable the debug log or the 'thumbnail' log group to make sure errors
1807  * are logged to a file for review.
1808  */
1809 $wgIgnoreImageErrors = false;
1810
1811 /**
1812  * Allow thumbnail rendering on page view. If this is false, a valid
1813  * thumbnail URL is still output, but no file will be created at
1814  * the target location. This may save some time if you have a
1815  * thumb.php or 404 handler set up which is faster than the regular
1816  * webserver(s).
1817  */
1818 $wgGenerateThumbnailOnParse = true;
1819
1820 /** Obsolete, always true, kept for compatibility with extensions */
1821 $wgUseImageResize = true;
1822
1823
1824 /** Set $wgCommandLineMode if it's not set already, to avoid notices */
1825 if( !isset( $wgCommandLineMode ) ) {
1826         $wgCommandLineMode = false;
1827 }
1828
1829 /** For colorized maintenance script output, is your terminal background dark ? */
1830 $wgCommandLineDarkBg = false;
1831
1832 #
1833 # Recent changes settings
1834 #
1835
1836 /** Log IP addresses in the recentchanges table; can be accessed only by extensions (e.g. CheckUser) or a DB admin */
1837 $wgPutIPinRC = true;
1838
1839 /**
1840  * Recentchanges items are periodically purged; entries older than this many
1841  * seconds will go.
1842  * For one week : 7 * 24 * 3600
1843  */
1844 $wgRCMaxAge = 7 * 24 * 3600;
1845
1846
1847 # Send RC updates via UDP
1848 $wgRC2UDPAddress = false;
1849 $wgRC2UDPPort = false;
1850 $wgRC2UDPPrefix = '';
1851
1852 #
1853 # Copyright and credits settings
1854 #
1855
1856 /** RDF metadata toggles */
1857 $wgEnableDublinCoreRdf = false;
1858 $wgEnableCreativeCommonsRdf = false;
1859
1860 /** Override for copyright metadata.
1861  * TODO: these options need documentation
1862  */
1863 $wgRightsPage = NULL;
1864 $wgRightsUrl = NULL;
1865 $wgRightsText = NULL;
1866 $wgRightsIcon = NULL;
1867
1868 /** Set this to some HTML to override the rights icon with an arbitrary logo */
1869 $wgCopyrightIcon = NULL;
1870
1871 /** Set this to true if you want detailed copyright information forms on Upload. */
1872 $wgUseCopyrightUpload = false;
1873
1874 /** Set this to false if you want to disable checking that detailed copyright
1875  * information values are not empty. */
1876 $wgCheckCopyrightUpload = true;
1877
1878 /**
1879  * Set this to the number of authors that you want to be credited below an
1880  * article text. Set it to zero to hide the attribution block, and a negative
1881  * number (like -1) to show all authors. Note that this will require 2-3 extra
1882  * database hits, which can have a not insignificant impact on performance for
1883  * large wikis.
1884  */
1885 $wgMaxCredits = 0;
1886
1887 /** If there are more than $wgMaxCredits authors, show $wgMaxCredits of them.
1888  * Otherwise, link to a separate credits page. */
1889 $wgShowCreditsIfMax = true;
1890
1891
1892
1893 /**
1894  * Set this to false to avoid forcing the first letter of links to capitals.
1895  * WARNING: may break links! This makes links COMPLETELY case-sensitive. Links
1896  * appearing with a capital at the beginning of a sentence will *not* go to the
1897  * same place as links in the middle of a sentence using a lowercase initial.
1898  */
1899 $wgCapitalLinks = true;
1900
1901 /**
1902  * List of interwiki prefixes for wikis we'll accept as sources for
1903  * Special:Import (for sysops). Since complete page history can be imported,
1904  * these should be 'trusted'.
1905  *
1906  * If a user has the 'import' permission but not the 'importupload' permission,
1907  * they will only be able to run imports through this transwiki interface.
1908  */
1909 $wgImportSources = array();
1910
1911 /**
1912  * Optional default target namespace for interwiki imports.
1913  * Can use this to create an incoming "transwiki"-style queue.
1914  * Set to numeric key, not the name.
1915  *
1916  * Users may override this in the Special:Import dialog.
1917  */
1918 $wgImportTargetNamespace = null;
1919
1920 /**
1921  * If set to false, disables the full-history option on Special:Export.
1922  * This is currently poorly optimized for long edit histories, so is
1923  * disabled on Wikimedia's sites.
1924  */
1925 $wgExportAllowHistory = true;
1926
1927 /**
1928  * If set nonzero, Special:Export requests for history of pages with
1929  * more revisions than this will be rejected. On some big sites things
1930  * could get bogged down by very very long pages.
1931  */
1932 $wgExportMaxHistory = 0;
1933
1934 $wgExportAllowListContributors = false ;
1935
1936
1937 /** Text matching this regular expression will be recognised as spam
1938  * See http://en.wikipedia.org/wiki/Regular_expression */
1939 $wgSpamRegex = false;
1940 /** Similarly you can get a function to do the job. The function will be given
1941  * the following args:
1942  *   - a Title object for the article the edit is made on
1943  *   - the text submitted in the textarea (wpTextbox1)
1944  *   - the section number.
1945  * The return should be boolean indicating whether the edit matched some evilness:
1946  *  - true : block it
1947  *  - false : let it through
1948  *
1949  * For a complete example, have a look at the SpamBlacklist extension.
1950  */
1951 $wgFilterCallback = false;
1952
1953 /** Go button goes straight to the edit screen if the article doesn't exist. */
1954 $wgGoToEdit = false;
1955
1956 /** Allow raw, unchecked HTML in <html>...</html> sections.
1957  * THIS IS VERY DANGEROUS on a publically editable site, so USE wgGroupPermissions
1958  * TO RESTRICT EDITING to only those that you trust
1959  */
1960 $wgRawHtml = false;
1961
1962 /**
1963  * $wgUseTidy: use tidy to make sure HTML output is sane.
1964  * Tidy is a free tool that fixes broken HTML.
1965  * See http://www.w3.org/People/Raggett/tidy/
1966  * $wgTidyBin should be set to the path of the binary and
1967  * $wgTidyConf to the path of the configuration file.
1968  * $wgTidyOpts can include any number of parameters.
1969  *
1970  * $wgTidyInternal controls the use of the PECL extension to use an in-
1971  *   process tidy library instead of spawning a separate program.
1972  *   Normally you shouldn't need to override the setting except for
1973  *   debugging. To install, use 'pear install tidy' and add a line
1974  *   'extension=tidy.so' to php.ini.
1975  */
1976 $wgUseTidy = false;
1977 $wgAlwaysUseTidy = false;
1978 $wgTidyBin = 'tidy';
1979 $wgTidyConf = $IP.'/includes/tidy.conf';
1980 $wgTidyOpts = '';
1981 $wgTidyInternal = extension_loaded( 'tidy' );
1982
1983 /**
1984  * Put tidy warnings in HTML comments
1985  * Only works for internal tidy.
1986  */
1987 $wgDebugTidy = false;
1988
1989 /**
1990  * Validate the overall output using tidy and refuse
1991  * to display the page if it's not valid.
1992  */
1993 $wgValidateAllHtml = false;
1994
1995 /** See list of skins and their symbolic names in languages/Language.php */
1996 $wgDefaultSkin = 'monobook';
1997
1998 /**
1999  * Settings added to this array will override the default globals for the user
2000  * preferences used by anonymous visitors and newly created accounts.
2001  * For instance, to disable section editing links:
2002  * $wgDefaultUserOptions ['editsection'] = 0;
2003  *
2004  */
2005 $wgDefaultUserOptions = array(
2006         'quickbar'              => 1,
2007         'underline'             => 2,
2008         'cols'                  => 80,
2009         'rows'                  => 25,
2010         'searchlimit'           => 20,
2011         'contextlines'          => 5,
2012         'contextchars'          => 50,
2013         'skin'                  => false,
2014         'math'                  => 1,
2015         'rcdays'                => 7,
2016         'rclimit'               => 50,
2017         'wllimit'               => 250,
2018         'highlightbroken'       => 1,
2019         'stubthreshold'         => 0,
2020         'previewontop'          => 1,
2021         'editsection'           => 1,
2022         'editsectiononrightclick'=> 0,
2023         'showtoc'               => 1,
2024         'showtoolbar'           => 1,
2025         'date'                  => 'default',
2026         'imagesize'             => 2,
2027         'thumbsize'             => 2,
2028         'rememberpassword'      => 0,
2029         'enotifwatchlistpages'  => 0,
2030         'enotifusertalkpages'   => 1,
2031         'enotifminoredits'      => 0,
2032         'enotifrevealaddr'      => 0,
2033         'shownumberswatching'   => 1,
2034         'fancysig'              => 0,
2035         'externaleditor'        => 0,
2036         'externaldiff'          => 0,
2037         'showjumplinks'         => 1,
2038         'numberheadings'        => 0,
2039         'uselivepreview'        => 0,
2040         'watchlistdays'         => 3.0,
2041 );
2042
2043 /** Whether or not to allow and use real name fields. Defaults to true. */
2044 $wgAllowRealName = true;
2045
2046 /*****************************************************************************
2047  *  Extensions
2048  */
2049
2050 /**
2051  * A list of callback functions which are called once MediaWiki is fully initialised
2052  */
2053 $wgExtensionFunctions = array();
2054
2055 /**
2056  * Extension functions for initialisation of skins. This is called somewhat earlier
2057  * than $wgExtensionFunctions.
2058  */
2059 $wgSkinExtensionFunctions = array();
2060
2061 /**
2062  * Extension messages files
2063  * Associative array mapping extension name to the filename where messages can be found.
2064  * The file must create a variable called $messages.
2065  * When the messages are needed, the extension should call wfLoadExtensionMessages().
2066  *
2067  * Example:
2068  *    $wgExtensionMessagesFiles['ConfirmEdit'] = dirname(__FILE__).'/ConfirmEdit.i18n.php';
2069  *
2070  */
2071 $wgExtensionMessagesFiles = array();
2072
2073 /**
2074  * Parser output hooks.
2075  * This is an associative array where the key is an extension-defined tag
2076  * (typically the extension name), and the value is a PHP callback.
2077  * These will be called as an OutputPageParserOutput hook, if the relevant
2078  * tag has been registered with the parser output object.
2079  *
2080  * Registration is done with $pout->addOutputHook( $tag, $data ).
2081  *
2082  * The callback has the form:
2083  *    function outputHook( $outputPage, $parserOutput, $data ) { ... }
2084  */
2085 $wgParserOutputHooks = array();
2086
2087 /**
2088  * List of valid skin names.
2089  * The key should be the name in all lower case, the value should be a display name.
2090  * The default skins will be added later, by Skin::getSkinNames(). Use
2091  * Skin::getSkinNames() as an accessor if you wish to have access to the full list.
2092  */
2093 $wgValidSkinNames = array();
2094
2095 /**
2096  * Special page list.
2097  * See the top of SpecialPage.php for documentation.
2098  */
2099 $wgSpecialPages = array();
2100
2101 /**
2102  * Array mapping class names to filenames, for autoloading.
2103  */
2104 $wgAutoloadClasses = array();
2105
2106 /**
2107  * An array of extension types and inside that their names, versions, authors,
2108  * urls, descriptions and pointers to localized description msgs. Note that
2109  * the version, url, description and descriptionmsg key can be omitted.
2110  *
2111  * <code>
2112  * $wgExtensionCredits[$type][] = array(
2113  *      'name' => 'Example extension',
2114  *      'version' => 1.9,
2115  *      'author' => 'Foo Barstein',
2116  *      'url' => 'http://wwww.example.com/Example%20Extension/',
2117  *      'description' => 'An example extension',
2118  *      'descriptionmsg' => 'exampleextension-desc',
2119  * );
2120  * </code>
2121  *
2122  * Where $type is 'specialpage', 'parserhook', 'variable', 'media' or 'other'.
2123  */
2124 $wgExtensionCredits = array();
2125 /*
2126  * end extensions
2127  ******************************************************************************/
2128
2129 /**
2130  * Allow user Javascript page?
2131  * This enables a lot of neat customizations, but may
2132  * increase security risk to users and server load.
2133  */
2134 $wgAllowUserJs = false;
2135
2136 /**
2137  * Allow user Cascading Style Sheets (CSS)?
2138  * This enables a lot of neat customizations, but may
2139  * increase security risk to users and server load.
2140  */
2141 $wgAllowUserCss = false;
2142
2143 /** Use the site's Javascript page? */
2144 $wgUseSiteJs = true;
2145
2146 /** Use the site's Cascading Style Sheets (CSS)? */
2147 $wgUseSiteCss = true;
2148
2149 /** Filter for Special:Randompage. Part of a WHERE clause */
2150 $wgExtraRandompageSQL = false;
2151
2152 /** Allow the "info" action, very inefficient at the moment */
2153 $wgAllowPageInfo = false;
2154
2155 /** Maximum indent level of toc. */
2156 $wgMaxTocLevel = 999;
2157
2158 /** Name of the external diff engine to use */
2159 $wgExternalDiffEngine = false;
2160
2161 /** Use RC Patrolling to check for vandalism */
2162 $wgUseRCPatrol = true;
2163
2164 /** Use new page patrolling to check new pages on Special:Newpages */
2165 $wgUseNPPatrol = true;
2166
2167 /** Provide syndication feeds (RSS, Atom) for, e.g., Recentchanges, Newpages */
2168 $wgFeed = true;
2169
2170 /** Set maximum number of results to return in syndication feeds (RSS, Atom) for
2171  * eg Recentchanges, Newpages. */
2172 $wgFeedLimit = 50;
2173
2174 /** _Minimum_ timeout for cached Recentchanges feed, in seconds.
2175  * A cached version will continue to be served out even if changes
2176  * are made, until this many seconds runs out since the last render.
2177  *
2178  * If set to 0, feed caching is disabled. Use this for debugging only;
2179  * feed generation can be pretty slow with diffs.
2180  */
2181 $wgFeedCacheTimeout = 60;
2182
2183 /** When generating Recentchanges RSS/Atom feed, diffs will not be generated for
2184  * pages larger than this size. */
2185 $wgFeedDiffCutoff = 32768;
2186
2187
2188 /**
2189  * Additional namespaces. If the namespaces defined in Language.php and
2190  * Namespace.php are insufficient, you can create new ones here, for example,
2191  * to import Help files in other languages.
2192  * PLEASE  NOTE: Once you delete a namespace, the pages in that namespace will
2193  * no longer be accessible. If you rename it, then you can access them through
2194  * the new namespace name.
2195  *
2196  * Custom namespaces should start at 100 to avoid conflicting with standard
2197  * namespaces, and should always follow the even/odd main/talk pattern.
2198  */
2199 #$wgExtraNamespaces =
2200 #       array(100 => "Hilfe",
2201 #             101 => "Hilfe_Diskussion",
2202 #             102 => "Aide",
2203 #             103 => "Discussion_Aide"
2204 #             );
2205 $wgExtraNamespaces = NULL;
2206
2207 /**
2208  * Namespace aliases
2209  * These are alternate names for the primary localised namespace names, which
2210  * are defined by $wgExtraNamespaces and the language file. If a page is
2211  * requested with such a prefix, the request will be redirected to the primary
2212  * name.
2213  *
2214  * Set this to a map from namespace names to IDs.
2215  * Example:
2216  *    $wgNamespaceAliases = array(
2217  *        'Wikipedian' => NS_USER,
2218  *        'Help' => 100,
2219  *    );
2220  */
2221 $wgNamespaceAliases = array();
2222
2223 /**
2224  * Limit images on image description pages to a user-selectable limit. In order
2225  * to reduce disk usage, limits can only be selected from a list.
2226  * The user preference is saved as an array offset in the database, by default
2227  * the offset is set with $wgDefaultUserOptions['imagesize']. Make sure you
2228  * change it if you alter the array (see bug 8858).
2229  * This is the list of settings the user can choose from:
2230  */
2231 $wgImageLimits = array (
2232         array(320,240),
2233         array(640,480),
2234         array(800,600),
2235         array(1024,768),
2236         array(1280,1024),
2237         array(10000,10000) );
2238
2239 /**
2240  * Adjust thumbnails on image pages according to a user setting. In order to
2241  * reduce disk usage, the values can only be selected from a list. This is the
2242  * list of settings the user can choose from:
2243  */
2244 $wgThumbLimits = array(
2245         120,
2246         150,
2247         180,
2248         200,
2249         250,
2250         300
2251 );
2252
2253 /**
2254  * Adjust width of upright images when parameter 'upright' is used
2255  * This allows a nicer look for upright images without the need to fix the width
2256  * by hardcoded px in wiki sourcecode.
2257  */
2258 $wgThumbUpright = 0.75;
2259
2260 /**
2261  *  On  category pages, show thumbnail gallery for images belonging to that
2262  * category instead of listing them as articles.
2263  */
2264 $wgCategoryMagicGallery = true;
2265
2266 /**
2267  * Paging limit for categories
2268  */
2269 $wgCategoryPagingLimit = 200;
2270
2271 /**
2272  * Browser Blacklist for unicode non compliant browsers
2273  * Contains a list of regexps : "/regexp/"  matching problematic browsers
2274  */
2275 $wgBrowserBlackList = array(
2276         /**
2277          * Netscape 2-4 detection
2278          * The minor version may contain strings such as "Gold" or "SGoldC-SGI"
2279          * Lots of non-netscape user agents have "compatible", so it's useful to check for that
2280          * with a negative assertion. The [UIN] identifier specifies the level of security
2281          * in a Netscape/Mozilla browser, checking for it rules out a number of fakers.
2282          * The language string is unreliable, it is missing on NS4 Mac.
2283          *
2284          * Reference: http://www.psychedelix.com/agents/index.shtml
2285          */
2286         '/^Mozilla\/2\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2287         '/^Mozilla\/3\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2288         '/^Mozilla\/4\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
2289
2290         /**
2291          * MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH>
2292          *
2293          * Known useragents:
2294          * - Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC)
2295          * - Mozilla/4.0 (compatible; MSIE 5.15; Mac_PowerPC)
2296          * - Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC)
2297          * - [...]
2298          *
2299          * @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864
2300          * @link http://en.wikipedia.org/wiki/Template%3AOS9
2301          */
2302         '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
2303
2304         /**
2305          * Google wireless transcoder, seems to eat a lot of chars alive
2306          * http://it.wikipedia.org/w/index.php?title=Luciano_Ligabue&diff=prev&oldid=8857361
2307          */
2308         '/^Mozilla\/4\.0 \(compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder;\)/'
2309 );
2310
2311 /**
2312  * Fake out the timezone that the server thinks it's in. This will be used for
2313  * date display and not for what's stored in the DB. Leave to null to retain
2314  * your server's OS-based timezone value. This is the same as the timezone.
2315  *
2316  * This variable is currently used ONLY for signature formatting, not for
2317  * anything else.
2318  */
2319 # $wgLocaltimezone = 'GMT';
2320 # $wgLocaltimezone = 'PST8PDT';
2321 # $wgLocaltimezone = 'Europe/Sweden';
2322 # $wgLocaltimezone = 'CET';
2323 $wgLocaltimezone = null;
2324
2325 /**
2326  * Set an offset from UTC in minutes to use for the default timezone setting
2327  * for anonymous users and new user accounts.
2328  *
2329  * This setting is used for most date/time displays in the software, and is
2330  * overrideable in user preferences. It is *not* used for signature timestamps.
2331  *
2332  * You can set it to match the configured server timezone like this:
2333  *   $wgLocalTZoffset = date("Z") / 60;
2334  *
2335  * If your server is not configured for the timezone you want, you can set
2336  * this in conjunction with the signature timezone and override the TZ
2337  * environment variable like so:
2338  *   $wgLocaltimezone="Europe/Berlin";
2339  *   putenv("TZ=$wgLocaltimezone");
2340  *   $wgLocalTZoffset = date("Z") / 60;
2341  *
2342  * Leave at NULL to show times in universal time (UTC/GMT).
2343  */
2344 $wgLocalTZoffset = null;
2345
2346
2347 /**
2348  * When translating messages with wfMsg(), it is not always clear what should be
2349  * considered UI messages and what shoud be content messages.
2350  *
2351  * For example, for regular wikipedia site like en, there should be only one
2352  * 'mainpage', therefore when getting the link of 'mainpage', we should treate
2353  * it as content of the site and call wfMsgForContent(), while for rendering the
2354  * text of the link, we call wfMsg(). The code in default behaves this way.
2355  * However, sites like common do offer different versions of 'mainpage' and the
2356  * like for different languages. This array provides a way to override the
2357  * default behavior. For example, to allow language specific mainpage and
2358  * community portal, set
2359  *
2360  * $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' );
2361  */
2362 $wgForceUIMsgAsContentMsg = array();
2363
2364
2365 /**
2366  * Authentication plugin.
2367  */
2368 $wgAuth = null;
2369
2370 /**
2371  * Global list of hooks.
2372  * Add a hook by doing:
2373  *     $wgHooks['event_name'][] = $function;
2374  * or:
2375  *     $wgHooks['event_name'][] = array($function, $data);
2376  * or:
2377  *     $wgHooks['event_name'][] = array($object, 'method');
2378  */
2379 $wgHooks = array();
2380
2381 /**
2382  * The logging system has two levels: an event type, which describes the
2383  * general category and can be viewed as a named subset of all logs; and
2384  * an action, which is a specific kind of event that can exist in that
2385  * log type.
2386  */
2387 $wgLogTypes = array( '',
2388         'block',
2389         'protect',
2390         'rights',
2391         'delete',
2392         'upload',
2393         'move',
2394         'import',
2395         'patrol',
2396         'merge',
2397 );
2398
2399 /**
2400  * Lists the message key string for each log type. The localized messages
2401  * will be listed in the user interface.
2402  *
2403  * Extensions with custom log types may add to this array.
2404  */
2405 $wgLogNames = array(
2406         ''        => 'all-logs-page',
2407         'block'   => 'blocklogpage',
2408         'protect' => 'protectlogpage',
2409         'rights'  => 'rightslog',
2410         'delete'  => 'dellogpage',
2411         'upload'  => 'uploadlogpage',
2412         'move'    => 'movelogpage',
2413         'import'  => 'importlogpage',
2414         'patrol'  => 'patrol-log-page',
2415         'merge'   => 'mergelog',
2416 );
2417
2418 /**
2419  * Lists the message key string for descriptive text to be shown at the
2420  * top of each log type.
2421  *
2422  * Extensions with custom log types may add to this array.
2423  */
2424 $wgLogHeaders = array(
2425         ''        => 'alllogstext',
2426         'block'   => 'blocklogtext',
2427         'protect' => 'protectlogtext',
2428         'rights'  => 'rightslogtext',
2429         'delete'  => 'dellogpagetext',
2430         'upload'  => 'uploadlogpagetext',
2431         'move'    => 'movelogpagetext',
2432         'import'  => 'importlogpagetext',
2433         'patrol'  => 'patrol-log-header',
2434         'merge'   => 'mergelogpagetext',
2435 );
2436
2437 /**
2438  * Lists the message key string for formatting individual events of each
2439  * type and action when listed in the logs.
2440  *
2441  * Extensions with custom log types may add to this array.
2442  */
2443 $wgLogActions = array(
2444         'block/block'       => 'blocklogentry',
2445         'block/unblock'     => 'unblocklogentry',
2446         'protect/protect'   => 'protectedarticle',
2447         'protect/modify'    => 'modifiedarticleprotection',
2448         'protect/unprotect' => 'unprotectedarticle',
2449         'rights/rights'     => 'rightslogentry',
2450         'delete/delete'     => 'deletedarticle',
2451         'delete/restore'    => 'undeletedarticle',
2452         'delete/revision'   => 'revdelete-logentry',
2453         'upload/upload'     => 'uploadedimage',
2454         'upload/overwrite'  => 'overwroteimage',
2455         'upload/revert'     => 'uploadedimage',
2456         'move/move'         => '1movedto2',
2457         'move/move_redir'   => '1movedto2_redir',
2458         'import/upload'     => 'import-logentry-upload',
2459         'import/interwiki'  => 'import-logentry-interwiki',
2460         'merge/merge'       => 'pagemerge-logentry',
2461 );
2462
2463 /**
2464  * Experimental preview feature to fetch rendered text
2465  * over an XMLHttpRequest from JavaScript instead of
2466  * forcing a submit and reload of the whole page.
2467  * Leave disabled unless you're testing it.
2468  */
2469 $wgLivePreview = false;
2470
2471 /**
2472  * Disable the internal MySQL-based search, to allow it to be
2473  * implemented by an extension instead.
2474  */
2475 $wgDisableInternalSearch = false;
2476
2477 /**
2478  * Set this to a URL to forward search requests to some external location.
2479  * If the URL includes '$1', this will be replaced with the URL-encoded
2480  * search term.
2481  *
2482  * For example, to forward to Google you'd have something like:
2483  * $wgSearchForwardUrl = 'http://www.google.com/search?q=$1' .
2484  *                       '&domains=http://example.com' .
2485  *                       '&sitesearch=http://example.com' .
2486  *                       '&ie=utf-8&oe=utf-8';
2487  */
2488 $wgSearchForwardUrl = null;
2489
2490 /**
2491  * If true, external URL links in wiki text will be given the
2492  * rel="nofollow" attribute as a hint to search engines that
2493  * they should not be followed for ranking purposes as they
2494  * are user-supplied and thus subject to spamming.
2495  */
2496 $wgNoFollowLinks = true;
2497
2498 /**
2499  * Namespaces in which $wgNoFollowLinks doesn't apply.
2500  * See Language.php for a list of namespaces.
2501  */
2502 $wgNoFollowNsExceptions = array();
2503
2504 /**
2505  * Default robot policy.
2506  * The default policy is to encourage indexing and following of links.
2507  * It may be overridden on a per-namespace and/or per-page basis.
2508  */
2509 $wgDefaultRobotPolicy = 'index,follow';
2510
2511 /**
2512  * Robot policies per namespaces.
2513  * The default policy is given above, the array is made of namespace
2514  * constants as defined in includes/Defines.php
2515  * Example:
2516  *   $wgNamespaceRobotPolicies = array( NS_TALK => 'noindex' );
2517  */
2518 $wgNamespaceRobotPolicies = array();
2519
2520 /**
2521  * Robot policies per article.
2522  * These override the per-namespace robot policies.
2523  * Must be in the form of an array where the key part is a properly
2524  * canonicalised text form title and the value is a robot policy.
2525  * Example:
2526  *   $wgArticleRobotPolicies = array( 'Main Page' => 'noindex' );
2527  */
2528 $wgArticleRobotPolicies = array();
2529
2530 /**
2531  * Specifies the minimal length of a user password. If set to
2532  * 0, empty passwords are allowed.
2533  */
2534 $wgMinimalPasswordLength = 0;
2535
2536 /**
2537  * Activate external editor interface for files and pages
2538  * See http://meta.wikimedia.org/wiki/Help:External_editors
2539  */
2540 $wgUseExternalEditor = true;
2541
2542 /** Whether or not to sort special pages in Special:Specialpages */
2543
2544 $wgSortSpecialPages = true;
2545
2546 /**
2547  * Specify the name of a skin that should not be presented in the
2548  * list of available skins.
2549  * Use for blacklisting a skin which you do not want to remove
2550  * from the .../skins/ directory
2551  */
2552 $wgSkipSkin = '';
2553 $wgSkipSkins = array(); # More of the same
2554
2555 /**
2556  * Array of disabled article actions, e.g. view, edit, dublincore, delete, etc.
2557  */
2558 $wgDisabledActions = array();
2559
2560 /**
2561  * Disable redirects to special pages and interwiki redirects, which use a 302 and have no "redirected from" link
2562  */
2563 $wgDisableHardRedirects = false;
2564
2565 /**
2566  * Use http.dnsbl.sorbs.net to check for open proxies
2567  */
2568 $wgEnableSorbs = false;
2569 $wgSorbsUrl = 'http.dnsbl.sorbs.net.';
2570
2571 /**
2572  * Proxy whitelist, list of addresses that are assumed to be non-proxy despite what the other
2573  * methods might say
2574  */
2575 $wgProxyWhitelist = array();
2576
2577 /**
2578  * Simple rate limiter options to brake edit floods.
2579  * Maximum number actions allowed in the given number of seconds;
2580  * after that the violating client receives HTTP 500 error pages
2581  * until the period elapses.
2582  *
2583  * array( 4, 60 ) for a maximum of 4 hits in 60 seconds.
2584  *
2585  * This option set is experimental and likely to change.
2586  * Requires memcached.
2587  */
2588 $wgRateLimits = array(
2589         'edit' => array(
2590                 'anon'   => null, // for any and all anonymous edits (aggregate)
2591                 'user'   => null, // for each logged-in user
2592                 'newbie' => null, // for each recent (autoconfirmed) account; overrides 'user'
2593                 'ip'     => null, // for each anon and recent account
2594                 'subnet' => null, // ... with final octet removed
2595                 ),
2596         'move' => array(
2597                 'user'   => null,
2598                 'newbie' => null,
2599                 'ip'     => null,
2600                 'subnet' => null,
2601                 ),
2602         'mailpassword' => array(
2603                 'anon' => NULL,
2604                 ),
2605         'emailuser' => array(
2606                 'user' => null,
2607                 ),
2608         );
2609
2610 /**
2611  * Set to a filename to log rate limiter hits.
2612  */
2613 $wgRateLimitLog = null;
2614
2615 /**
2616  * Array of groups which should never trigger the rate limiter
2617  */
2618 $wgRateLimitsExcludedGroups = array( 'sysop', 'bureaucrat' );
2619
2620 /**
2621  * On Special:Unusedimages, consider images "used", if they are put
2622  * into a category. Default (false) is not to count those as used.
2623  */
2624 $wgCountCategorizedImagesAsUsed = false;
2625
2626 /**
2627  * External stores allow including content
2628  * from non database sources following URL links
2629  *
2630  * Short names of ExternalStore classes may be specified in an array here:
2631  * $wgExternalStores = array("http","file","custom")...
2632  *
2633  * CAUTION: Access to database might lead to code execution
2634  */
2635 $wgExternalStores = false;
2636
2637 /**
2638  * An array of external mysql servers, e.g.
2639  * $wgExternalServers = array( 'cluster1' => array( 'srv28', 'srv29', 'srv30' ) );
2640  */
2641 $wgExternalServers = array();
2642
2643 /**
2644  * The place to put new revisions, false to put them in the local text table.
2645  * Part of a URL, e.g. DB://cluster1
2646  *
2647  * Can be an array instead of a single string, to enable data distribution. Keys
2648  * must be consecutive integers, starting at zero. Example:
2649  *
2650  * $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' );
2651  *
2652  */
2653 $wgDefaultExternalStore = false;
2654
2655 /**
2656  * Revision text may be cached in $wgMemc to reduce load on external storage
2657  * servers and object extraction overhead for frequently-loaded revisions.
2658  *
2659  * Set to 0 to disable, or number of seconds before cache expiry.
2660  */
2661 $wgRevisionCacheExpiry = 0;
2662
2663 /**
2664 * list of trusted media-types and mime types.
2665 * Use the MEDIATYPE_xxx constants to represent media types.
2666 * This list is used by Image::isSafeFile
2667 *
2668 * Types not listed here will have a warning about unsafe content
2669 * displayed on the images description page. It would also be possible
2670 * to use this for further restrictions, like disabling direct
2671 * [[media:...]] links for non-trusted formats.
2672 */
2673 $wgTrustedMediaFormats= array(
2674         MEDIATYPE_BITMAP, //all bitmap formats
2675         MEDIATYPE_AUDIO,  //all audio formats
2676         MEDIATYPE_VIDEO,  //all plain video formats
2677         "image/svg+xml",  //svg (only needed if inline rendering of svg is not supported)
2678         "application/pdf",  //PDF files
2679         #"application/x-shockwave-flash", //flash/shockwave movie
2680 );
2681
2682 /**
2683  * Allow special page inclusions such as {{Special:Allpages}}
2684  */
2685 $wgAllowSpecialInclusion = true;
2686
2687 /**
2688  * Timeout for HTTP requests done via CURL
2689  */
2690 $wgHTTPTimeout = 3;
2691
2692 /**
2693  * Proxy to use for CURL requests.
2694  */
2695 $wgHTTPProxy = false;
2696
2697 /**
2698  * Enable interwiki transcluding.  Only when iw_trans=1.
2699  */
2700 $wgEnableScaryTranscluding = false;
2701 /**
2702  * Expiry time for interwiki transclusion
2703  */
2704 $wgTranscludeCacheExpiry = 3600;
2705
2706 /**
2707  * Support blog-style "trackbacks" for articles.  See
2708  * http://www.sixapart.com/pronet/docs/trackback_spec for details.
2709  */
2710 $wgUseTrackbacks = false;
2711
2712 /**
2713  * Enable filtering of categories in Recentchanges
2714  */
2715 $wgAllowCategorizedRecentChanges = false ;
2716
2717 /**
2718  * Number of jobs to perform per request. May be less than one in which case
2719  * jobs are performed probabalistically. If this is zero, jobs will not be done
2720  * during ordinary apache requests. In this case, maintenance/runJobs.php should
2721  * be run periodically.
2722  */
2723 $wgJobRunRate = 1;
2724
2725 /**
2726  * Number of rows to update per job
2727  */
2728 $wgUpdateRowsPerJob = 500;
2729
2730 /**
2731  * Number of rows to update per query
2732  */
2733 $wgUpdateRowsPerQuery = 10;
2734
2735 /**
2736  * Enable AJAX framework
2737  */
2738 $wgUseAjax = true;
2739
2740 /**
2741  * Enable auto suggestion for the search bar
2742  * Requires $wgUseAjax to be true too.
2743  * Causes wfSajaxSearch to be added to $wgAjaxExportList
2744  */
2745 $wgAjaxSearch = false;
2746
2747 /**
2748  * List of Ajax-callable functions.
2749  * Extensions acting as Ajax callbacks must register here
2750  */
2751 $wgAjaxExportList = array( );
2752
2753 /**
2754  * Enable watching/unwatching pages using AJAX.
2755  * Requires $wgUseAjax to be true too.
2756  * Causes wfAjaxWatch to be added to $wgAjaxExportList
2757  */
2758 $wgAjaxWatch = true;
2759
2760 /**
2761  * Enable AJAX check for file overwrite, pre-upload
2762  */
2763 $wgAjaxUploadDestCheck = true;
2764
2765 /**
2766  * Enable previewing licences via AJAX
2767  */
2768 $wgAjaxLicensePreview = true;
2769
2770 /**
2771  * Allow DISPLAYTITLE to change title display
2772  */
2773 $wgAllowDisplayTitle = true;
2774
2775 /**
2776  * Array of usernames which may not be registered or logged in from
2777  * Maintenance scripts can still use these
2778  */
2779 $wgReservedUsernames = array(
2780         'MediaWiki default', // Default 'Main Page' and MediaWiki: message pages
2781         'Conversion script', // Used for the old Wikipedia software upgrade
2782         'Maintenance script', // Maintenance scripts which perform editing, image import script
2783         'Template namespace initialisation script', // Used in 1.2->1.3 upgrade
2784 );
2785
2786 /**
2787  * MediaWiki will reject HTMLesque tags in uploaded files due to idiotic browsers which can't
2788  * perform basic stuff like MIME detection and which are vulnerable to further idiots uploading
2789  * crap files as images. When this directive is on, <title> will be allowed in files with
2790  * an "image/svg+xml" MIME type. You should leave this disabled if your web server is misconfigured
2791  * and doesn't send appropriate MIME types for SVG images.
2792  */
2793 $wgAllowTitlesInSVG = false;
2794
2795 /**
2796  * Array of namespaces which can be deemed to contain valid "content", as far
2797  * as the site statistics are concerned. Useful if additional namespaces also
2798  * contain "content" which should be considered when generating a count of the
2799  * number of articles in the wiki.
2800  */
2801 $wgContentNamespaces = array( NS_MAIN );
2802
2803 /**
2804  * Maximum amount of virtual memory available to shell processes under linux, in KB.
2805  */
2806 $wgMaxShellMemory = 102400;
2807
2808 /**
2809  * Maximum file size created by shell processes under linux, in KB
2810  * ImageMagick convert for example can be fairly hungry for scratch space
2811  */
2812 $wgMaxShellFileSize = 102400;
2813
2814 /**
2815  * DJVU settings
2816  * Path of the djvudump executable
2817  * Enable this and $wgDjvuRenderer to enable djvu rendering
2818  */
2819 # $wgDjvuDump = 'djvudump';
2820 $wgDjvuDump = null;
2821
2822 /**
2823  * Path of the ddjvu DJVU renderer
2824  * Enable this and $wgDjvuDump to enable djvu rendering
2825  */
2826 # $wgDjvuRenderer = 'ddjvu';
2827 $wgDjvuRenderer = null;
2828
2829 /**
2830  * Path of the djvutoxml executable
2831  * This works like djvudump except much, much slower as of version 3.5.
2832  *
2833  * For now I recommend you use djvudump instead. The djvuxml output is
2834  * probably more stable, so we'll switch back to it as soon as they fix
2835  * the efficiency problem.
2836  * http://sourceforge.net/tracker/index.php?func=detail&aid=1704049&group_id=32953&atid=406583
2837  */
2838 # $wgDjvuToXML = 'djvutoxml';
2839 $wgDjvuToXML = null;
2840
2841
2842 /**
2843  * Shell command for the DJVU post processor
2844  * Default: pnmtopng, since ddjvu generates ppm output
2845  * Set this to false to output the ppm file directly.
2846  */
2847 $wgDjvuPostProcessor = 'pnmtojpeg';
2848 /**
2849  * File extension for the DJVU post processor output
2850  */
2851 $wgDjvuOutputExtension = 'jpg';
2852
2853 /**
2854  * Enable the MediaWiki API for convenient access to
2855  * machine-readable data via api.php
2856  *
2857  * See http://www.mediawiki.org/wiki/API
2858  */
2859 $wgEnableAPI = true;
2860
2861 /**
2862  * Allow the API to be used to perform write operations
2863  * (page edits, rollback, etc.) when an authorised user
2864  * accesses it
2865  */
2866 $wgEnableWriteAPI = false;
2867
2868 /**
2869  * API module extensions
2870  * Associative array mapping module name to class name.
2871  * Extension modules may override the core modules.
2872  */
2873 $wgAPIModules = array();
2874
2875 /**
2876  * Maximum amount of rows to scan in a DB query in the API
2877  * The default value is generally fine
2878  */
2879 $wgAPIMaxDBRows = 5000;
2880
2881 /**
2882  * Parser test suite files to be run by parserTests.php when no specific
2883  * filename is passed to it.
2884  *
2885  * Extensions may add their own tests to this array, or site-local tests
2886  * may be added via LocalSettings.php
2887  *
2888  * Use full paths.
2889  */
2890 $wgParserTestFiles = array(
2891         "$IP/maintenance/parserTests.txt",
2892 );
2893
2894 /**
2895  * Break out of framesets. This can be used to prevent external sites from
2896  * framing your site with ads.
2897  */
2898 $wgBreakFrames = false;
2899
2900 /**
2901  * Set this to an array of special page names to prevent
2902  * maintenance/updateSpecialPages.php from updating those pages.
2903  */
2904 $wgDisableQueryPageUpdate = false;
2905
2906 /**
2907  * Set this to false to disable cascading protection
2908  */
2909 $wgEnableCascadingProtection = true;
2910
2911 /**
2912  * Disable output compression (enabled by default if zlib is available)
2913  */
2914 $wgDisableOutputCompression = false;
2915
2916 /**
2917  * If lag is higher than $wgSlaveLagWarning, show a warning in some special
2918  * pages (like watchlist).  If the lag is higher than $wgSlaveLagCritical,
2919  * show a more obvious warning.
2920  */
2921 $wgSlaveLagWarning = 10;
2922 $wgSlaveLagCritical = 30;
2923
2924 /**
2925  * Parser configuration. Associative array with the following members:
2926  *
2927  *  class             The class name
2928  *  preprocessorClass The preprocessor class, by default it is Preprocessor_DOM
2929  *                    but it has a dependency of the dom module of PHP. If you
2930  *                    don't have this module, you can use Preprocessor_Hash wich
2931  *                    has not this depedency.
2932  *                    It has no effect with Parser_OldPP parser class.
2933  *
2934  *
2935  * The entire associative array will be passed through to the constructor as
2936  * the first parameter. Note that only Setup.php can use this variable --
2937  * the configuration will change at runtime via $wgParser member functions, so
2938  * the contents of this variable will be out-of-date. The variable can only be
2939  * changed during LocalSettings.php, in particular, it can't be changed during
2940  * an extension setup function.
2941  */
2942 $wgParserConf = array(
2943         'class' => 'Parser',
2944         'preprocessorClass' => 'Preprocessor_DOM',
2945 );
2946
2947 /**
2948  * Hooks that are used for outputting exceptions
2949  * Format is:
2950  *      $wgExceptionHooks[] = $funcname
2951  * or:
2952  *      $wgExceptionHooks[] = array( $class, $funcname )
2953  * Hooks should return strings or false
2954  */
2955 $wgExceptionHooks = array();
2956
2957 /**
2958  * Page property link table invalidation lists.
2959  * Should only be set by extensions.
2960  */
2961 $wgPagePropLinkInvalidations = array(
2962         'hiddencat' => 'categorylinks',
2963 );
2964
2965 /**
2966  * Maximum number of links to a redirect page listed on
2967  * Special:Whatlinkshere/RedirectDestination
2968  */
2969 $wgMaxRedirectLinksRetrieved = 500;