[lhc/web/wiklou.git] / docs / hooks.txt

hooks.txt

This document describes how event hooks work in MediaWiki; how to add
hooks for an event; and how to run hooks for an event.

==Glossary==

event
     Something that happens with the wiki. For example: a user logs
     in. A wiki page is saved. A wiki page is deleted. Often there are
     two events associated with a single action: one before the code
     is run to make the event happen, and one after. Each event has a
     name, preferably in CamelCase. For example, 'UserLogin',
     'ArticleSave', 'ArticleSaveComplete', 'ArticleDelete'.

hook
     A clump of code and data that should be run when an event
     happens. This can be either a function and a chunk of data, or an
     object and a method.
     
hook function
     The function part of a hook.
     
==Rationale==

Hooks allow us to decouple optionally-run code from code that is run
for everyone. It allows MediaWiki hackers, third-party developers and
local administrators to define code that will be run at certain points
in the mainline code, and to modify the data run by that mainline
code. Hooks can keep mainline code simple, and make it easier to
write extensions. Hooks are a principled alternative to local patches.

Consider, for example, two options in MediaWiki. One reverses the
order of a title before displaying the article; the other converts the
title to all uppercase letters. Currently, in MediaWiki code, we
would handle this as follows (note: not real code, here):

    function showAnArticle($article) {
        global $wgReverseTitle, $wgCapitalizeTitle;
        
        if ($wgReverseTitle) {
            wfReverseTitle($article);
        }
        
        if ($wgCapitalizeTitle) {
           wfCapitalizeTitle($article);
        }
        
        # code to actually show the article goes here
    }
    
An extension writer, or a local admin, will often add custom code to
the function -- with or without a global variable. For example,
someone wanting email notification when an article is shown may add:

    function showAnArticle($article) {
        global $wgReverseTitle, $wgCapitalizeTitle;
        
        if ($wgReverseTitle) {
            wfReverseTitle($article);
        }
        
        if ($wgCapitalizeTitle) {
           wfCapitalizeTitle($article);
        }

        # code to actually show the article goes here
        
        if ($wgNotifyArticle) {
           wfNotifyArticleShow($article));
        }
    }

Using a hook-running strategy, we can avoid having all this
option-specific stuff in our mainline code. Using hooks, the function
becomes:

    function showAnArticle($article) {

        if (wfRunHooks('ArticleShow', array(&$article))) {
        
            # code to actually show the article goes here
            
            wfRunHooks('ArticleShowComplete', array(&$article));
        }
    }

We've cleaned up the code here by removing clumps of weird,
infrequently used code and moving them off somewhere else. It's much
easier for someone working with this code to see what's _really_ going
on, and make changes or fix bugs.

In addition, we can take all the code that deals with the little-used
title-reversing options (say) and put it in one place. Instead of
having little title-reversing if-blocks spread all over the codebase
in showAnArticle, deleteAnArticle, exportArticle, etc., we can
concentrate it all in an extension file:

    function reverseArticleTitle($article) {
        # ...
    }

    function reverseForExport($article) {
        # ...
    }

The setup function for the extension just has to add its hook
functions to the appropriate events:

    setupTitleReversingExtension() {
        global $wgHooks;
        
        $wgHooks['ArticleShow'][] = 'reverseArticleTitle';
        $wgHooks['ArticleDelete'][] = 'reverseArticleTitle';
        $wgHooks['ArticleExport'][] = 'reverseForExport';
    }

Having all this code related to the title-reversion option in one
place means that it's easier to read and understand; you don't have to
do a grep-find to see where the $wgReverseTitle variable is used, say.

If the code is well enough isolated, it can even be excluded when not
used -- making for some slight savings in memory and load-up
performance at runtime. Admins who want to have all the reversed
titles can add:

    require_once('extensions/ReverseTitle.php');
    
...to their LocalSettings.php file; those of us who don't want or need
it can just leave it out.

The extensions don't even have to be shipped with MediaWiki; they
could be provided by a third-party developer or written by the admin
him/herself.

==Writing hooks==

A hook is a chunk of code run at some particular event. It consists of:

  * a function with some optional accompanying data, or
  * an object with a method and some optional accompanying data.

Hooks are registered by adding them to the global $wgHooks array for a
given event. All the following are valid ways to define hooks:

      $wgHooks['EventName'][] = 'someFunction'; # function, no data
      $wgHooks['EventName'][] = array('someFunction', $someData);
      $wgHooks['EventName'][] = array('someFunction'); # weird, but OK
      
      $wgHooks['EventName'][] = $object; # object only
      $wgHooks['EventName'][] = array($object, 'someMethod');
      $wgHooks['EventName'][] = array($object, 'someMethod', $someData);
      $wgHooks['EventName'][] = array($object); # weird but OK

When an event occurs, the function (or object method) will be called
with the optional data provided as well as event-specific parameters.
The above examples would result in the following code being executed
when 'EventName' happened:

      # function, no data
      someFunction($param1, $param2)
      # function with data
      someFunction($someData, $param1, $param2)

      # object only
      $object->onEventName($param1, $param2)
      # object with method
      $object->someMethod($param1, $param2)
      # object with method and data
      $object->someMethod($someData, $param1, $param2)
      
Note that when an object is the hook, and there's no specified method,
the default method called is 'onEventName'. For different events this
would be different: 'onArticleSave', 'onUserLogin', etc.

The extra data is useful if we want to use the same function or object
for different purposes. For example:

      $wgHooks['ArticleSaveComplete'][] = array('ircNotify', 'TimStarling');
      $wgHooks['ArticleSaveComplete'][] = array('ircNotify', 'brion');

This code would result in ircNotify being run twice when an article is
saved: once for 'TimStarling', and once for 'brion'.

Hooks can return three possible values:

  * true: the hook has operated successfully
  * "some string": an error occurred; processing should
          stop and the error should be shown to the user
  * false: the hook has successfully done the work
           necessary and the calling function should skip
        
The last result would be for cases where the hook function replaces
the main functionality. For example, if you wanted to authenticate
users to a custom system (LDAP, another PHP program, whatever), you
could do:

    $wgHooks['UserLogin'][] = array('ldapLogin', $ldapServer);
                                
    function ldapLogin($username, $password) {
        # log user into LDAP
        return false;
    }

Returning false makes less sense for events where the action is
complete, and will normally be ignored.

==Using hooks==

A calling function or method uses the wfRunHooks() function to run
the hooks related to a particular event, like so:

    class Article { 
        # ...
        function protect() {
            global $wgUser;
            if (wfRunHooks('ArticleProtect', array(&$this, &$wgUser))) {
                # protect the article
                wfRunHooks('ArticleProtectComplete', array(&$this, &$wgUser));
            }
        }
                                                    
wfRunHooks() returns true if the calling function should continue
processing (the hooks ran OK, or there are no hooks to run), or false
if it shouldn't (an error occurred, or one of the hooks handled the
action already). Checking the return value matters more for "before"
hooks than for "complete" hooks.

Note that hook parameters are passed in an array; this is a necessary
inconvenience to make it possible to pass reference values (that can
be changed) into the hook code. Also note that earlier versions of
wfRunHooks took a variable number of arguments; the array() calling
protocol came about after MediaWiki 1.4rc1.

==Events and parameters==

This is a list of known events and parameters; please add to it if
you're going to add events to the MediaWiki code.

'AbortNewAccount': Return false to cancel account creation.
$user: the User object about to be created (read-only, incomplete)
$message: out parameter: error message to display on abort

'AddNewAccount': after a user account is created
$user: the User object that was created. (Parameter added in 1.7)

'ArticleDelete': before an article is deleted
$article: the article (object) being deleted
$user: the user (object) deleting the article
$reason: the reason (string) the article is being deleted

'ArticleDeleteComplete': after an article is deleted
$article: the article that was deleted
$user: the user that deleted the article
$reason: the reason the article was deleted

'ArticleProtect': before an article is protected
$article: the article being protected
$user: the user doing the protection
$protect: boolean whether this is a protect or an unprotect
$reason: Reason for protect
$moveonly: boolean whether this is for move only or not

'ArticleProtectComplete': after an article is protected
$article: the article that was protected
$user: the user who did the protection
$protect: boolean whether it was a protect or an unprotect
$reason: Reason for protect
$moveonly: boolean whether it was for move only or not

'ArticleSave': before an article is saved
$article: the article (object) being saved
$user: the user (object) saving the article
$text: the new article text
$summary: the article summary (comment)
$isminor: minor flag
$iswatch: watch flag
$section: section #

'ArticleSaveComplete': after an article is saved
$article: the article (object) saved
$user: the user (object) who saved the article
$text: the new article text
$summary: the article summary (comment)
$isminor: minor flag
$iswatch: watch flag
$section: section #

'AutoAuthenticate': called to authenticate users on external/environmental means
$user: writes user object to this parameter

'BadImage': When checking against the bad image list
$name: Image name being checked
&$bad: Whether or not the image is "bad"

Change $bad and return false to override. If an image is "bad", it is not
rendered inline in wiki pages or galleries in category pages.

'BlockIp': before an IP address or user is blocked
$block: the Block object about to be saved
$user: the user _doing_ the block (not the one being blocked)

'BlockIpComplete': after an IP address or user is blocked
$block: the Block object that was saved
$user: the user who did the block (not the one being blocked)

'DiffViewHeader': called before diff display
$diff: DifferenceEngine object that's calling
$oldRev: Revision object of the "old" revision (may be null/invalid)
$newRev: Revision object of the "new" revision

'EditFormPreloadText': Allows population of the edit form when creating new pages
&$text: Text to preload with
&$title: Title object representing the page being created

'EditFilter': Perform checks on an edit
$editor: Edit form (see includes/EditPage.php)
$text: Contents of the edit box
$section: Section being edited
&$error: Error message to return

Return false to halt editing; you'll need to handle error messages, etc. yourself.
Alternatively, modifying $error and returning true will cause the contents of $error
to be echoed at the top of the edit form as wikitext. Return true without altering
$error to allow the edit to proceed.

'EmailConfirmed': When checking that the user's email address is "confirmed"
$user: User being checked
$confirmed: Whether or not the email address is confirmed
This runs before the other checks, such as anonymity and the real check; return
true to allow those checks to occur, and false if checking is done.

'EmailUser': before sending email from one user to another
$to: address of receiving user
$from: address of sending user
$subject: subject of the mail
$text: text of the mail

'EmailUserComplete': after sending email from one user to another
$to: address of receiving user
$from: address of sending user
$subject: subject of the mail
$text: text of the mail

'FetchChangesList': When fetching the ChangesList derivative for a particular user
&$user: User the list is being fetched for
&$skin: Skin object to be used with the list
&$list: List object (defaults to NULL, change it to an object instance and return
false override the list derivative used)

'GetInternalURL': modify fully-qualified URLs used for squid cache purging
$title: Title object of page
$url: string value as output (out parameter, can modify)
$query: query options passed to Title::getInternalURL()

'GetLocalURL': modify local URLs as output into page links
$title: Title object of page
$url: string value as output (out parameter, can modify)
$query: query options passed to Title::getLocalURL()

'GetFullURL': modify fully-qualified URLs used in redirects/export/offsite data
$title: Title object of page
$url: string value as output (out parameter, can modify)
$query: query options passed to Title::getFullURL()

'LogPageValidTypes': action being logged. DEPRECATED: Use $wgLogTypes
&$type: array of strings

'LogPageLogName': name of the logging page(s). DEPRECATED: Use $wgLogNames
&$typeText: array of strings

'LogPageLogHeader': strings used by wfMsg as a header. DEPRECATED: Use $wgLogHeaders
&$headerText: array of strings

'LogPageActionText': strings used by wfMsg as a header. DEPRECATED: Use $wgLogActions
&$actionText: array of strings

'MarkPatrolled': before an edit is marked patrolled
$rcid: ID of the revision to be marked patrolled
$user: the user (object) marking the revision as patrolled
$wcOnlySysopsCanPatrol: config setting indicating whether the user
 needs to be a sysop in order to mark an edit patrolled

'MarkPatrolledComplete': after an edit is marked patrolled
$rcid: ID of the revision marked as patrolled
$user: user (object) who marked the edit patrolled
$wcOnlySysopsCanPatrol: config setting indicating whether the user
 must be a sysop to patrol the edit

'MathAfterTexvc': after texvc is executed when rendering mathematics
$mathRenderer: instance of MathRenderer
$errmsg: error message, in HTML (string). Nonempty indicates failure
 of rendering the formula

'OutputPageBeforeHTML': a page has been processed by the parser and
the resulting HTML is about to be displayed.  
$parserOutput: the parserOutput (object) that corresponds to the page 
$text: the text that will be displayed, in HTML (string)

'PageRenderingHash': alter the parser cache option hash key
  A parser extension which depends on user options should install
  this hook and append its values to the key.
$hash: reference to a hash key string which can be modified

'PersonalUrls': Alter the user-specific navigation links (e.g. "my page,
my talk page, my contributions" etc).

&$personal_urls: Array of link specifiers (see SkinTemplate.php)
&$title: Title object representing the current page

'SiteNoticeBefore': Before the sitenotice/anonnotice is composed
&$siteNotice: HTML returned as the sitenotice
Return true to allow the normal method of notice selection/rendering to work,
or change the value of $siteNotice and return false to alter it.

'SiteNoticeAfter': After the sitenotice/anonnotice is composed
&$siteNotice: HTML sitenotice
Alter the contents of $siteNotice to add to/alter the sitenotice/anonnotice.

'TitleMoveComplete': after moving an article (title)
$old: old title
$nt: new title
$user: user who did the move
$pageid: database ID of the page that's been moved
$redirid: database ID of the created redirect

'UnknownAction': An unknown "action" has occured (useful for defining
                 your own actions)
$action: action name
$article: article "acted on"

'UnwatchArticle': before a watch is removed from an article
$user: user watching
$article: article object to be removed

'UnwatchArticle': after a watch is removed from an article
$user: user that was watching
$article: article object removed

'UploadVerification': additional chances to reject an uploaded file
string $saveName: destination file name
string $tempName: filesystem path to the temporary file for checks
string &$error: output: HTML error to show if upload canceled by returning false

'UploadComplete': Upon completion of a file upload
$image: Image object representing the file that was uploaded

'UserCan': To interrupt/advise the "user can do X to Y article" check
$title: Title object being checked against
$user : Current user object
$action: Action being checked
$result: Pointer to result returned if hook returns false. If null is returned,
 UserCan checks are continued by internal code

'UserCreateForm': change to manipulate the login form
$template: SimpleTemplate instance for the form

'UserLoginComplete': after a user has logged in
$user: the user object that was created on login
                    
'UserLoginForm': change to manipulate the login form
$template: SimpleTemplate instance for the form

'UserLogout': before a user logs out
$user: the user object that is about to be logged out
       
'UserLogoutComplete': after a user has logged out
$user: the user object _after_ logout (won't have name, ID, etc.)

'UserRights': After a user's group memberships are changed
$user  : User object that was changed
$add   : Array of strings corresponding to groups added
$remove: Array of strings corresponding to groups removed
                      
'WatchArticle': before a watch is added to an article
$user: user that will watch
$article: article object to be watched

'WatchArticleComplete': after a watch is added to an article
$user: user that watched
$article: article object watched

'UnwatchArticleComplete': after a watch is removed from an article
$user: user that watched
$article: article object that was watched

'CategoryPageView': before viewing a categorypage in CategoryPage::view
$catpage: CategoryPage instance

'SkinTemplateContentActions': after building the $content_action array right
                              before returning it, see Content_action.php in
                              the extensions/examples/ directory
                              ( http://svn.wikimedia.org/viewvc/mediawiki/trunk/extensions/examples/ )
                              for a demonstration of how to use this hook.
$content_actions: The array of content actions

'BeforePageDisplay': Called just before outputting a page (all kinds of,
                     articles, special, history, preview, diff, edit, ...)
                     Can be used to set custom CSS/JS
$out: OutputPage object

More hooks might be available but undocumented, you can execute
./maintenance/findhooks.php to find hidden one.