*
* @throws DBUnexpectedError
*/
- protected function assertHasConnectionHandle() {
+ final protected function assertHasConnectionHandle() {
if ( !$this->isOpen() ) {
throw new DBUnexpectedError( $this, "DB connection was already closed." );
}
/**
* Make sure that this server is not marked as a replica nor read-only as a sanity check
*
- * @throws DBUnexpectedError
+ * @throws DBReadOnlyRoleError
+ * @throws DBReadOnlyError
*/
protected function assertIsWritableMaster() {
if ( $this->getLBInfo( 'replica' ) === true ) {
/**
* Run a query and return a DBMS-dependent wrapper or boolean
*
+ * This is meant to handle the basic command of actually sending a query to the
+ * server via the driver. No implicit transaction, reconnection, nor retry logic
+ * should happen here. The higher level query() method is designed to handle those
+ * sorts of concerns. This method should not trigger such higher level methods.
+ *
+ * The lastError() and lastErrno() methods should meaningfully reflect what error,
+ * if any, occured during the last call to this method. Methods like executeQuery(),
+ * query(), select(), insert(), update(), delete(), and upsert() implement their calls
+ * to doQuery() such that an immediately subsequent call to lastError()/lastErrno()
+ * meaningfully reflects any error that occured during that public query method call.
+ *
* For SELECT queries, this returns either:
* - a) A driver-specific value/resource, only on success. This can be iterated
* over by calling fetchObject()/fetchRow() until there are no more rows.
// for all queries within a request. Use cases:
// - Treating these as writes would trigger ChronologyProtector (see method doc).
// - We use this method to reject writes to replicas, but we need to allow
- // use of transactions on replicas for read snapshots. This fine given
+ // use of transactions on replicas for read snapshots. This is fine given
// that transactions by themselves don't make changes, only actual writes
// within the transaction matter, which we still detect.
return !preg_match(
- '/^(?:SELECT|BEGIN|ROLLBACK|COMMIT|SAVEPOINT|RELEASE|SET|SHOW|EXPLAIN|\(SELECT)\b/i',
+ '/^(?:SELECT|BEGIN|ROLLBACK|COMMIT|SAVEPOINT|RELEASE|SET|SHOW|EXPLAIN|USE|\(SELECT)\b/i',
$sql
);
}
protected function isTransactableQuery( $sql ) {
return !in_array(
$this->getQueryVerb( $sql ),
- [ 'BEGIN', 'ROLLBACK', 'COMMIT', 'SET', 'SHOW', 'CREATE', 'ALTER' ],
+ [ 'BEGIN', 'ROLLBACK', 'COMMIT', 'SET', 'SHOW', 'CREATE', 'ALTER', 'USE' ],
true
);
}
}
public function query( $sql, $fname = __METHOD__, $flags = 0 ) {
- $this->assertTransactionStatus( $sql, $fname );
- $this->assertHasConnectionHandle();
-
$flags = (int)$flags; // b/c; this field used to be a bool
- $ignoreErrors = $this->hasFlags( $flags, self::QUERY_SILENCE_ERRORS );
+ // Sanity check that the SQL query is appropriate in the current context and is
+ // allowed for an outside caller (e.g. does not break transaction/session tracking).
+ $this->assertQueryIsCurrentlyAllowed( $sql, $fname );
+
+ // Send the query to the server and fetch any corresponding errors
+ list( $ret, $err, $errno, $unignorable ) = $this->executeQuery( $sql, $fname, $flags );
+ if ( $ret === false ) {
+ $ignoreErrors = $this->hasFlags( $flags, self::QUERY_SILENCE_ERRORS );
+ // Throw an error unless both the ignore flag was set and a rollback is not needed
+ $this->reportQueryError( $err, $errno, $sql, $fname, $ignoreErrors && !$unignorable );
+ }
+
+ return $this->resultObject( $ret );
+ }
+
+ /**
+ * Execute a query, retrying it if there is a recoverable connection loss
+ *
+ * This is similar to query() except:
+ * - It does not prevent all non-ROLLBACK queries if there is a corrupted transaction
+ * - It does not disallow raw queries that are supposed to use dedicated IDatabase methods
+ * - It does not throw exceptions for common error cases
+ *
+ * This is meant for internal use with Database subclasses.
+ *
+ * @param string $sql Original SQL query
+ * @param string $fname Name of the calling function
+ * @param int $flags Bitfield of class QUERY_* constants
+ * @return array An n-tuple of:
+ * - mixed|bool: An object, resource, or true on success; false on failure
+ * - string: The result of calling lastError()
+ * - int: The result of calling lastErrno()
+ * - bool: Whether a rollback is needed to allow future non-rollback queries
+ * @throws DBUnexpectedError
+ */
+ final protected function executeQuery( $sql, $fname, $flags ) {
+ $this->assertHasConnectionHandle();
$priorTransaction = $this->trxLevel;
- $priorWritesPending = $this->writesOrCallbacksPending();
if ( $this->isWriteQuery( $sql ) ) {
# In theory, non-persistent writes are allowed in read-only mode, but due to things
# like https://bugs.mysql.com/bug.php?id=33669 that might not work anyway...
$this->assertIsWritableMaster();
- # Do not treat temporary table writes as "meaningful writes" that need committing.
- # Profile them as reads. Integration tests can override this behavior via $flags.
+ # Do not treat temporary table writes as "meaningful writes" since they are only
+ # visible to one session and are not permanent. Profile them as reads. Integration
+ # tests can override this behavior via $flags.
$pseudoPermanent = $this->hasFlags( $flags, self::QUERY_PSEUDO_PERMANENT );
$tableType = $this->registerTempTableWrite( $sql, $pseudoPermanent );
- $isEffectiveWrite = ( $tableType !== self::TEMP_NORMAL );
+ $isPermWrite = ( $tableType !== self::TEMP_NORMAL );
# DBConnRef uses QUERY_REPLICA_ROLE to enforce the replica role for raw SQL queries
- if ( $isEffectiveWrite && $this->hasFlags( $flags, self::QUERY_REPLICA_ROLE ) ) {
+ if ( $isPermWrite && $this->hasFlags( $flags, self::QUERY_REPLICA_ROLE ) ) {
throw new DBReadOnlyRoleError( $this, "Cannot write; target role is DB_REPLICA" );
}
} else {
- $isEffectiveWrite = false;
+ $isPermWrite = false;
}
- # Add trace comment to the begin of the sql string, right after the operator.
- # Or, for one-word queries (like "BEGIN" or COMMIT") add it to the end (T44598)
+ // Add trace comment to the begin of the sql string, right after the operator.
+ // Or, for one-word queries (like "BEGIN" or COMMIT") add it to the end (T44598)
$commentedSql = preg_replace( '/\s|$/', " /* $fname {$this->agent} */ ", $sql, 1 );
- # Send the query to the server and fetch any corresponding errors
- $ret = $this->attemptQuery( $sql, $commentedSql, $isEffectiveWrite, $fname );
- $lastError = $this->lastError();
- $lastErrno = $this->lastErrno();
-
- $recoverableSR = false; // recoverable statement rollback?
- $recoverableCL = false; // recoverable connection loss?
-
- if ( $ret === false && $this->wasConnectionLoss() ) {
- # Check if no meaningful session state was lost
- $recoverableCL = $this->canRecoverFromDisconnect( $sql, $priorWritesPending );
- # Update session state tracking and try to restore the connection
- $reconnected = $this->replaceLostConnection( __METHOD__ );
- # Silently resend the query to the server if it is safe and possible
- if ( $recoverableCL && $reconnected ) {
- $ret = $this->attemptQuery( $sql, $commentedSql, $isEffectiveWrite, $fname );
- $lastError = $this->lastError();
- $lastErrno = $this->lastErrno();
-
- if ( $ret === false && $this->wasConnectionLoss() ) {
- # Query probably causes disconnects; reconnect and do not re-run it
- $this->replaceLostConnection( __METHOD__ );
- } else {
- $recoverableCL = false; // connection does not need recovering
- $recoverableSR = $this->wasKnownStatementRollbackError();
- }
- }
- } else {
- $recoverableSR = $this->wasKnownStatementRollbackError();
+ // Send the query to the server and fetch any corresponding errors
+ list( $ret, $err, $errno, $recoverableSR, $recoverableCL, $reconnected ) =
+ $this->executeQueryAttempt( $sql, $commentedSql, $isPermWrite, $fname, $flags );
+ // Check if the query failed due to a recoverable connection loss
+ if ( $ret === false && $recoverableCL && $reconnected ) {
+ // Silently resend the query to the server since it is safe and possible
+ list( $ret, $err, $errno, $recoverableSR, $recoverableCL ) =
+ $this->executeQueryAttempt( $sql, $commentedSql, $isPermWrite, $fname, $flags );
}
+ $corruptedTrx = false;
+
if ( $ret === false ) {
if ( $priorTransaction ) {
if ( $recoverableSR ) {
# We're ignoring an error that caused just the current query to be aborted.
# But log the cause so we can log a deprecation notice if a caller actually
# does ignore it.
- $this->trxStatusIgnoredCause = [ $lastError, $lastErrno, $fname ];
+ $this->trxStatusIgnoredCause = [ $err, $errno, $fname ];
} elseif ( !$recoverableCL ) {
# Either the query was aborted or all queries after BEGIN where aborted.
# In the first case, the only options going forward are (a) ROLLBACK, or
# (b) ROLLBACK TO SAVEPOINT (if one was set). If the later case, the only
# option is ROLLBACK, since the snapshots would have been released.
+ $corruptedTrx = true; // cannot recover
$this->trxStatus = self::STATUS_TRX_ERROR;
$this->trxStatusCause =
- $this->getQueryExceptionAndLog( $lastError, $lastErrno, $sql, $fname );
- $ignoreErrors = false; // cannot recover
+ $this->getQueryExceptionAndLog( $err, $errno, $sql, $fname );
$this->trxStatusIgnoredCause = null;
}
}
-
- $this->reportQueryError( $lastError, $lastErrno, $sql, $fname, $ignoreErrors );
}
- return $this->resultObject( $ret );
+ return [ $ret, $err, $errno, $corruptedTrx ];
}
/**
- * Wrapper for query() that also handles profiling, logging, and affected row count updates
+ * Wrapper for doQuery() that handles DBO_TRX, profiling, logging, affected row count
+ * tracking, and reconnects (without retry) on query failure due to connection loss
*
* @param string $sql Original SQL query
* @param string $commentedSql SQL query with debugging/trace comment
- * @param bool $isEffectiveWrite Whether the query is a (non-temporary table) write
+ * @param bool $isPermWrite Whether the query is a (non-temporary table) write
* @param string $fname Name of the calling function
- * @return bool|ResultWrapper True for a successful write query, ResultWrapper
- * object for a successful read query, or false on failure
+ * @param int $flags Bitfield of class QUERY_* constants
+ * @return array An n-tuple of:
+ * - mixed|bool: An object, resource, or true on success; false on failure
+ * - string: The result of calling lastError()
+ * - int: The result of calling lastErrno()
+ * - bool: Whether a statement rollback error occured
+ * - bool: Whether a disconnect *both* happened *and* was recoverable
+ * - bool: Whether a reconnection attempt was *both* made *and* succeeded
+ * @throws DBUnexpectedError
*/
- private function attemptQuery( $sql, $commentedSql, $isEffectiveWrite, $fname ) {
- $this->beginIfImplied( $sql, $fname );
+ private function executeQueryAttempt( $sql, $commentedSql, $isPermWrite, $fname, $flags ) {
+ $priorWritesPending = $this->writesOrCallbacksPending();
+
+ if ( ( $flags & self::QUERY_IGNORE_DBO_TRX ) == 0 ) {
+ $this->beginIfImplied( $sql, $fname );
+ }
// Keep track of whether the transaction has write queries pending
- if ( $isEffectiveWrite ) {
+ if ( $isPermWrite ) {
$this->lastWriteTime = microtime( true );
if ( $this->trxLevel && !$this->trxDoneWrites ) {
$this->trxDoneWrites = true;
$this->affectedRowCount = null;
$this->lastQuery = $sql;
$ret = $this->doQuery( $commentedSql );
+ $lastError = $this->lastError();
+ $lastErrno = $this->lastErrno();
+
$this->affectedRowCount = $this->affectedRows();
unset( $ps ); // profile out (if set)
$queryRuntime = max( microtime( true ) - $startTime, 0.0 );
+ $recoverableSR = false; // recoverable statement rollback?
+ $recoverableCL = false; // recoverable connection loss?
+ $reconnected = false; // reconnection both attempted and succeeded?
+
if ( $ret !== false ) {
$this->lastPing = $startTime;
- if ( $isEffectiveWrite && $this->trxLevel ) {
+ if ( $isPermWrite && $this->trxLevel ) {
$this->updateTrxWriteQueryTime( $sql, $queryRuntime, $this->affectedRows() );
$this->trxWriteCallers[] = $fname;
}
+ } elseif ( $this->wasConnectionError( $lastErrno ) ) {
+ # Check if no meaningful session state was lost
+ $recoverableCL = $this->canRecoverFromDisconnect( $sql, $priorWritesPending );
+ # Update session state tracking and try to restore the connection
+ $reconnected = $this->replaceLostConnection( __METHOD__ );
+ } else {
+ # Check if only the last query was rolled back
+ $recoverableSR = $this->wasKnownStatementRollbackError();
}
if ( $sql === self::PING_QUERY ) {
$this->trxProfiler->recordQueryCompletion(
$generalizedSql,
$startTime,
- $isEffectiveWrite,
- $isEffectiveWrite ? $this->affectedRows() : $this->numRows( $ret )
+ $isPermWrite,
+ $isPermWrite ? $this->affectedRows() : $this->numRows( $ret )
);
// Avoid the overhead of logging calls unless debug mode is enabled
);
}
- return $ret;
+ return [ $ret, $lastError, $lastErrno, $recoverableSR, $recoverableCL, $reconnected ];
}
/**
* @param string $fname
* @throws DBTransactionStateError
*/
- private function assertTransactionStatus( $sql, $fname ) {
+ private function assertQueryIsCurrentlyAllowed( $sql, $fname ) {
$verb = $this->getQueryVerb( $sql );
if ( $verb === 'USE' ) {
throw new DBUnexpectedError( $this, "Got USE query; use selectDomain() instead." );
* a wrapper. Nowadays, raw database objects are never exposed to external
* callers, so this is unnecessary in external code.
*
- * @param bool|ResultWrapper|resource $result
- * @return bool|ResultWrapper
+ * @param bool|IResultWrapper|resource $result
+ * @return bool|IResultWrapper
*/
protected function resultObject( $result ) {
if ( !$result ) {
* Delete a table
* @param string $tableName
* @param string $fName
- * @return bool|ResultWrapper
+ * @return bool|IResultWrapper
* @since 1.18
*/
public function dropTable( $tableName, $fName = __METHOD__ ) {
dépôts / lhc / web / wiklou.git / blobdiff