<?php
/**
- * DO NOT EDIT THIS FILE!
*
- * To customize your installation, edit "LocalSettings.php".
+ * DO NOT EVER EDIT THIS FILE!
+ *
+ *
+ * To customize your installation, edit "LocalSettings.php". If you make
+ * changes here, they will be lost on next upgrade of MediaWiki!
*
* Note that since all these string interpolations are expanded
* before LocalSettings is included, if you localize something
* like $wgScriptPath, you must also localize everything that
* depends on it.
*
+ * Documentation is in the source and on:
+ * http://www.mediawiki.org/wiki/Help:Configuration_settings
+ *
* @package MediaWiki
*/
# This is not a valid entry point, perform no further processing unless MEDIAWIKI is defined
-if( defined( 'MEDIAWIKI' ) ) {
+if( !defined( 'MEDIAWIKI' ) ) {
+ echo "This file is part of MediaWiki and is not a valid entry point\n";
+ die( -1 );
+}
+
+/**
+ * Create a site configuration object
+ * Not used for much in a default install
+ */
+require_once( 'includes/SiteConfiguration.php' );
+$wgConf = new SiteConfiguration;
/** MediaWiki version number */
-$wgVersion = '1.5pre-alpha';
+$wgVersion = '1.6alpha';
/** Name of the site. It must be changed in LocalSettings.php */
$wgSitename = 'MediaWiki';
/** Will be same as you set @see $wgSitename */
$wgMetaNamespace = FALSE;
-/** URL of the server. It will be automaticly build including https mode */
+
+/** URL of the server. It will be automatically built including https mode */
$wgServer = '';
if( isset( $_SERVER['SERVER_NAME'] ) ) {
$wgServerName = $_SERVER['SERVER_NAME'];
} elseif( isset( $_SERVER['HOSTNAME'] ) ) {
$wgServerName = $_SERVER['HOSTNAME'];
+} elseif( isset( $_SERVER['HTTP_HOST'] ) ) {
+ $wgServerName = $_SERVER['HTTP_HOST'];
+} elseif( isset( $_SERVER['SERVER_ADDR'] ) ) {
+ $wgServerName = $_SERVER['SERVER_ADDR'];
} else {
- # FIXME: Fall back on... something else?
$wgServerName = 'localhost';
}
$wgProto = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] == 'on') ? 'https' : 'http';
$wgServer = $wgProto.'://' . $wgServerName;
-if( isset( $_SERVER['SERVER_PORT'] ) && $_SERVER['SERVER_PORT'] != 80 ) {
+# If the port is a non-standard one, add it to the URL
+if( isset( $_SERVER['SERVER_PORT'] )
+ && ( ( $wgProto == 'http' && $_SERVER['SERVER_PORT'] != 80 )
+ || ( $wgProto == 'https' && $_SERVER['SERVER_PORT'] != 443 ) ) ) {
+
$wgServer .= ":" . $_SERVER['SERVER_PORT'];
}
-unset($wgProto);
/**
* make sure that LocalSettings.php is correctly set!
* @deprecated
*/
-/**
+/**
* @global string $wgScript
*/
$wgScript = "{$wgScriptPath}/index.php";
*/
$wgStyleDirectory = "{$IP}/skins";
$wgStyleSheetPath = &$wgStylePath;
-$wgStyleSheetDirectory = &$wgStyleDirectory;
$wgArticlePath = "{$wgScript}?title=$1";
$wgUploadPath = "{$wgScriptPath}/upload";
$wgUploadDirectory = "{$IP}/upload";
$wgHashedUploadDirectory = true;
$wgLogo = "{$wgUploadPath}/wiki.png";
+$wgFavicon = '/favicon.ico';
$wgMathPath = "{$wgUploadPath}/math";
$wgMathDirectory = "{$wgUploadDirectory}/math";
$wgTmpDirectory = "{$wgUploadDirectory}/tmp";
$wgUploadBaseUrl = "";
/**#@-*/
+/**
+ * Allowed title characters -- regex character class
+ * Don't change this unless you know what you're doing
+ *
+ * Problematic punctuation:
+ * []{}|# Are needed for link syntax, never enable these
+ * % Enabled by default, minor problems with path to query rewrite rules, see below
+ * + Doesn't work with path to query rewrite rules, corrupted by apache
+ * ? Enabled by default, but doesn't work with path to PATH_INFO rewrites
+ *
+ * All three of these punctuation problems can be avoided by using an alias, instead of a
+ * rewrite rule of either variety.
+ *
+ * The problem with % is that when using a path to query rewrite rule, URLs are
+ * double-unescaped: once by Apache's path conversion code, and again by PHP. So
+ * %253F, for example, becomes "?". Our code does not double-escape to compensate
+ * for this, indeed double escaping would break if the double-escaped title was
+ * passed in the query string rather than the path. This is a minor security issue
+ * because articles can be created such that they are hard to view or edit.
+ *
+ * Theoretically 0x80-0x9F of ISO 8859-1 should be disallowed, but
+ * this breaks interlanguage links
+ */
+$wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF";
+
+
+/**
+ * The external URL protocols
+ */
+$wgUrlProtocols = array(
+ 'http://',
+ 'https://',
+ 'ftp://',
+ 'irc://',
+ 'gopher://',
+ 'telnet://', // Well if we're going to support the above.. -ævar
+ 'nntp://', // @bug 3808 RFC 1738
+ 'worldwind://',
+ 'mailto:',
+ 'news:'
+);
+
+/** internal name of virus scanner. This servers as a key to the $wgAntivirusSetup array.
+ * Set this to NULL to disable virus scanning. If not null, every file uploaded will be scanned for viruses.
+ * @global string $wgAntivirus
+ */
+$wgAntivirus= NULL;
+
+/** Configuration for different virus scanners. This an associative array of associative arrays:
+ * it contains on setup array per known scanner type. The entry is selected by $wgAntivirus, i.e.
+ * valid values for $wgAntivirus are the keys defined in this array.
+ *
+ * The configuration array for each scanner contains the following keys: "command", "codemap", "messagepattern";
+ *
+ * "command" is the full command to call the virus scanner - %f will be replaced with the name of the
+ * file to scan. If not present, the filename will be appended to the command. Note that this must be
+ * overwritten if the scanner is not in the system path; in that case, plase set
+ * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full path.
+ *
+ * "codemap" is a mapping of exit code to return codes of the detectVirus function in SpecialUpload.
+ * An exit code mapped to AV_SCAN_FAILED causes the function to consider the scan to be failed. This will pass
+ * the file if $wgAntivirusRequired is not set.
+ * An exit code mapped to AV_SCAN_ABORTED causes the function to consider the file to have an usupported format,
+ * which is probably imune to virusses. This causes the file to pass.
+ * An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning no virus was found.
+ * All other codes (like AV_VIRUS_FOUND) will cause the function to report a virus.
+ * You may use "*" as a key in the array to catch all exit codes not mapped otherwise.
+ *
+ * "messagepattern" is a perl regular expression to extract the meaningful part of the scanners
+ * output. The relevant part should be matched as group one (\1).
+ * If not defined or the pattern does not match, the full message is shown to the user.
+ *
+ * @global array $wgAntivirusSetup
+ */
+$wgAntivirusSetup= array(
+
+ #setup for clamav
+ 'clamav' => array (
+ 'command' => "clamscan --no-summary ",
+
+ 'codemap'=> array (
+ "0"=> AV_NO_VIRUS, #no virus
+ "1"=> AV_VIRUS_FOUND, #virus found
+ "52"=> AV_SCAN_ABORTED, #unsupported file format (probably imune)
+ "*"=> AV_SCAN_FAILED, #else scan failed
+ ),
+
+ 'messagepattern'=> '/.*?:(.*)/sim',
+ ),
+
+ #setup for f-prot
+ 'f-prot' => array (
+ 'command' => "f-prot ",
+
+ 'codemap'=> array (
+ "0"=> AV_NO_VIRUS, #no virus
+ "3"=> AV_VIRUS_FOUND, #virus found
+ "6"=> AV_VIRUS_FOUND, #virus found
+ "*"=> AV_SCAN_FAILED, #else scan failed
+ ),
+
+ 'messagepattern'=> '/.*?Infection:(.*)$/m',
+ ),
+);
+
+
+/** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected.
+ * @global boolean $wgAntivirusRequired
+*/
+$wgAntivirusRequired= true;
+
+/** Determines if the mime type of uploaded files should be checked
+ * @global boolean $wgVerifyMimeType
+*/
+$wgVerifyMimeType= true;
+
+/** Sets the mime type definition file to use by MimeMagic.php.
+* @global string $wgMimeTypeFile
+*/
+#$wgMimeTypeFile= "/etc/mime.types";
+$wgMimeTypeFile= "includes/mime.types";
+#$wgMimeTypeFile= NULL; #use built-in defaults only.
+
+/** Sets the mime type info file to use by MimeMagic.php.
+* @global string $wgMimeInfoFile
+*/
+$wgMimeInfoFile= "includes/mime.info";
+#$wgMimeInfoFile= NULL; #use built-in defaults only.
+
+/** Switch for loading the FileInfo extension by PECL at runtime.
+* This should be used only if fileinfo is installed as a shared object / dynamic libary
+* @global string $wgLoadFileinfoExtension
+*/
+$wgLoadFileinfoExtension= false;
+
+/** Sets an external mime detector program. The command must print only the mime type to standard output.
+* the name of the file to process will be appended to the command given here.
+* If not set or NULL, mime_content_type will be used if available.
+*/
+$wgMimeDetectorCommand= NULL; # use internal mime_content_type function, available since php 4.3.0
+#$wgMimeDetectorCommand= "file -bi"; #use external mime detector (Linux)
+
+/** Switch for trivial mime detection. Used by thumb.php to disable all fance things,
+* because only a few types of images are needed and file extensions can be trusted.
+*/
+$wgTrivialMimeDetection= false;
+
/**
* To set 'pretty' URL paths for actions other than
* plain page views, add to this array. For instance:
$wgUseSharedUploads = false;
/** Full path on the web server where shared uploads can be found */
$wgSharedUploadPath = "http://commons.wikimedia.org/shared/images";
-/** Path on the file system where shared uploads can be found */
+/** Fetch commons image description pages and display them on the local wiki? */
+$wgFetchCommonsDescriptions = false;
+/** Path on the file system where shared uploads can be found. */
$wgSharedUploadDirectory = "/var/www/wiki3/images";
-/** Path on the file system where shared uploads can be found */
-$wgSharedUploadDBname = "commons";
+/** DB name with metadata about shared directory. Set this to false if the uploads do not come from a wiki. */
+$wgSharedUploadDBname = false;
+/** Optional table prefix used in database. */
+$wgSharedUploadDBprefix = '';
+/** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */
+$wgCacheSharedUploads = true;
+
+/**
+ * Point the upload navigation link to an external URL
+ * Useful if you want to use a shared repository by default
+ * without disabling local uploads (use $wgEnableUploads = false for that)
+ * e.g. $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
+*/
+$wgUploadNavigationUrl = false;
+
+/**
+ * Give a path here to use thumb.php for thumbnail generation on client request, instead of
+ * generating them on render and outputting a static URL. This is necessary if some of your
+ * apache servers don't have read/write access to the thumbnail path.
+ *
+ * Example:
+ * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb.php";
+ */
+$wgThumbnailScriptPath = false;
+$wgSharedThumbnailScriptPath = false;
/**
* Set the following to false especially if you have a set of files that need to
*/
$wgHashedSharedUploadDirectory = true;
-/** set true if the repository uses latin1 filenames */
-$wgSharedLatin1=false;
-
/**
* Base URL for a repository wiki. Leave this blank if uploads are just stored
* in a shared directory and not meant to be accessible through a separate wiki.
* Default to apache@SERVER_NAME
* @global string $wgPasswordSender
*/
-$wgPasswordSender = '
Wikipedia Mail <apache@' . $wgServerName . '>';
+$wgPasswordSender = '
MediaWiki Mail <apache@' . $wgServerName . '>';
/**
* dummy address which should be accepted during mail send action
/**
* SMTP Mode
- * For using a direct (authenticated) SMTP server connection.
+ * For using a direct (authenticated) SMTP server connection.
* Default to false or fill an array :
* <code>
* "host" => 'SMTP domain',
*/
$wgDBtype = "mysql";
/** Search type
- * "MyISAM" for MySQL native full text search, "Tsearch2" for PostgreSQL
- * based search engine
+ * Leave as null to select the default search engine for the
+ * selected database type (eg SearchMySQL4), or set to a class
+ * name to override to a custom search engine.
*/
-$wgSearchType = "MyISAM";
+$wgSearchType = null;
/** Table name prefix */
-$wgDBprefix = '';
+$wgDBprefix = '';
/** Database schema
- * on some databases this allows separate
+ * on some databases this allows separate
* logical namespace for application data
*/
$wgDBschema = 'mediawiki';
/**#@-*/
+/** Live high performance sites should disable this - some checks acquire giant mysql locks */
+$wgCheckDBSchema = true;
/**
# Database load balancer
# This is a two-dimensional array, an array of server info structures
-# Fields are:
-# host: Host name
-# dbname: Default database name
-# user: DB user
-# password: DB password
-# type: "mysql" or "pgsql"
-# load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
-# flags: bit field
-# DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
-# DBO_DEBUG -- equivalent of $wgDebugDumpSql
-# DBO_TRX -- wrap entire request in a transaction
-# DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
-# DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
+# Fields are:
+# host: Host name
+# dbname: Default database name
+# user: DB user
+# password: DB password
+# type: "mysql" or "pgsql"
+# load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
+# groupLoads: array of load ratios, the key is the query group name. A query may belong
+# to several groups, the most specific group defined here is used.
+#
+# flags: bit field
+# DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
+# DBO_DEBUG -- equivalent of $wgDebugDumpSql
+# DBO_TRX -- wrap entire request in a transaction
+# DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
+# DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
+#
+# max lag: (optional) Maximum replication lag before a slave will taken out of rotation
+# max threads: (optional) Maximum number of running threads
+#
+# These and any other user-defined properties will be assigned to the mLBInfo member
+# variable of the Database object.
#
# Leave at false to use the single-server variables above
-$wgDBservers = false;
+$wgDBservers = false;
-/** How long to wait for a slave to catch up to the master */
+/** How long to wait for a slave to catch up to the master */
$wgMasterWaitTimeout = 10;
/** File to log MySQL errors to */
$wgDBerrorLog = false;
+/** When to give an error message */
+$wgDBClusterTimeout = 10;
+
/**
* wgDBminWordLen :
* MySQL 3.x : used to discard words that MySQL will not return any results for
$wgDBminWordLen = 4;
/** Set to true if using InnoDB tables */
$wgDBtransactions = false;
-/** Set to true to use enhanced fulltext search */
-$wgDBmysql4 = false;
-$wgSqlTimeout = 30;
+/** Set to true for compatibility with extensions that might be checking.
+ * MySQL 3.23.x is no longer supported. */
+$wgDBmysql4 = true;
+
+/**
+ * Set to true to engage MySQL 4.1/5.0 charset-related features;
+ * for now will just cause sending of 'SET NAMES=utf8' on connect.
+ *
+ * WARNING: THIS IS EXPERIMENTAL!
+ *
+ * May break if you're not using the table defs from mysql5/tables.sql.
+ * May break if you're upgrading an existing wiki if set differently.
+ * Broken symptoms likely to include incorrect behavior with page titles,
+ * usernames, comments etc containing non-ASCII characters.
+ * Might also cause failures on the object cache and other things.
+ *
+ * Even correct usage may cause failures with Unicode supplementary
+ * characters (those not in the Basic Multilingual Plane) unless MySQL
+ * has enhanced their Unicode support.
+ */
+$wgDBmysql5 = false;
/**
* Other wikis on this site, can be administered from a single developer
* account.
- * Array, interwiki prefix => database name
- */
+ * Array numeric key => database name
+ */
$wgLocalDatabases = array();
+/**
+ * Object cache settings
+ * See Defines.php for types
+ */
+$wgMainCacheType = CACHE_NONE;
+$wgMessageCacheType = CACHE_ANYTHING;
+$wgParserCacheType = CACHE_ANYTHING;
+
+$wgParserCacheExpireTime = 86400;
-# Memcached settings
-# See docs/memcached.doc
-#
-$wgMemCachedDebug = false; # Will be set to false in Setup.php, if the server isn't working
-$wgUseMemCached = false;
-$wgMemCachedServers = array( '127.0.0.1:11000' );
-$wgMemCachedDebug = false;
$wgSessionsInMemcached = false;
$wgLinkCacheMemcached = false; # Not fully tested
/**
- * Turck MMCache shared memory
- * You can use this for persistent caching where your wiki runs on a single
- * server. Enabled by default if Turck is installed. Mutually exclusive with
- * memcached and eAccelerator, the preference order priorities being memcached first,
- * Turck MMCache second, and eAccelerator third.
- *
- * @global bool $wgUseTurckShm Enable or disabled Turck MMCache
+ * Memcached-specific settings
+ * See docs/memcached.txt
*/
-$wgUseTurckShm = false;
+$wgUseMemCached = false;
+$wgMemCachedDebug = false; # Will be set to false in Setup.php, if the server isn't working
+$wgMemCachedServers = array( '127.0.0.1:11000' );
+$wgMemCachedDebug = false;
+$wgMemCachedPersistent = false;
/**
- * eAccelerator shared memory
- * You can use this for persistent caching where your wiki runs on a single
- * server. Enabled by default if eAccelerator is installed. Mutually exclusive with
- * memcached and Turck MMCache, the preference order being memcached first,
- * Turck MMCache second, and eAccelerator third.
- *
- * Most of the code to support this is directly copied from the Turck code.
- *
- * @global bool $wgUseEAccelShm Enable or disabled eAccelerator
+ * Directory for local copy of message cache, for use in addition to memcached
*/
-$wgUseEAccelShm = false;
+$wgLocalMessageCache = false;
+/**
+ * Directory for compiled constant message array databases
+ * WARNING: turning anything on will just break things, aaaaaah!!!!
+ */
+$wgCachedMessageArrays = false;
# Language settings
#
-/** Site language code, should be one of ./language/Language(.*).php */
+/** Site language code, should be one of ./languages/Language(.*).php */
$wgLanguageCode = 'en';
-/** Filename of a language file generated by dumpMessages.php */
-$wgLanguageFile = false;
-
/** Treat language links as magic connectors, not inline links */
$wgInterwikiMagic = true;
-/** LanguageUtf8.php normally overrides this */
-$wgInputEncoding = 'ISO-8859-1';
-/** unless you set the next option to true: */
-$wgOutputEncoding = 'ISO-8859-1';
-/** Enable ISO-8859-1 compatibility mode */
-$wgUseLatin1 = false;
+/** Hide interlanguage links from the sidebar */
+$wgHideInterlanguageLinks = false;
+
+
+/** We speak UTF-8 all the time now, unless some oddities happen */
+$wgInputEncoding = 'UTF-8';
+$wgOutputEncoding = 'UTF-8';
$wgEditEncoding = '';
# Set this to eg 'ISO-8859-1' to perform character set
# en masse in the database before continuing as a UTF-8 wiki.
$wgLegacyEncoding = false;
+/**
+ * If set to true, the MediaWiki 1.4 to 1.5 schema conversion will
+ * create stub reference rows in the text table instead of copying
+ * the full text of all current entries from 'cur' to 'text'.
+ *
+ * This will speed up the conversion step for large sites, but
+ * requires that the cur table be kept around for those revisions
+ * to remain viewable.
+ *
+ * maintenance/migrateCurStubs.php can be used to complete the
+ * migration in the background once the wiki is back online.
+ *
+ * This option affects the updaters *only*. Any present cur stub
+ * revisions will be readable at runtime regardless of this setting.
+ */
+$wgLegacySchemaConversion = false;
+
$wgMimeType = 'text/html';
+$wgJsMimeType = 'text/javascript';
$wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN';
$wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
/** Enable to allow rewriting dates in page text.
* DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES */
-$wgUseDynamicDates = false;
-/** Enable for English module to print dates as eg 'May 12' instead of '12 May' */
-$wgAmericanDates = false;
+$wgUseDynamicDates = false;
+/** Enable dates like 'May 12' instead of '12 May', this only takes effect if
+ * the interface is set to English
+ */
+$wgAmericanDates = false;
/**
* For Hindi and Arabic use local numerals instead of Western style (0-9)
* numerals in interface.
# Translation using MediaWiki: namespace
# This will increase load times by 25-60% unless memcached is installed
-# Interface messages will be get from the database.
+# Interface messages will be loaded from the database.
$wgUseDatabaseMessages = true;
$wgMsgCacheExpiry = 86400;
-$wgPartialMessageCache = false;
-# Whether to enable language variant conversion. Currently only zh
-# supports this function, to convert between Traditional and Simplified
-# Chinese. This flag is meant to isolate the (untested) conversion
-# code, so that if it breaks, only zh will be affected
+# Whether to enable language variant conversion.
$wgDisableLangConversion = false;
-# Use article validation feature; turned off by default
-$wgUseValidation = false;
-
# Whether to use zhdaemon to perform Chinese text processing
# zhdaemon is under developement, so normally you don't want to
# use it unless for testing
$wgZhdaemonHost="localhost";
$wgZhdaemonPort=2004;
+/** Normally you can ignore this and it will be something
+ like $wgMetaNamespace . "_talk". In some languages, you
+ may want to set this manually for grammatical reasons.
+ It is currently only respected by those languages
+ where it might be relevant and where no automatic
+ grammar converter exists.
+*/
+$wgMetaNamespaceTalk = false;
+
# Miscellaneous configuration settings
#
$wgLocalInterwiki = 'w';
$wgInterwikiExpiry = 10800; # Expiry time for cache of interwiki table
+/** Interwiki caching settings.
+ $wgInterwikiCache specifies path to constant database file
+ This cdb database is generated by dumpInterwiki from maintenance
+ and has such key formats:
+ dbname:key - a simple key (e.g. enwiki:meta)
+ _sitename:key - site-scope key (e.g. wiktionary:meta)
+ __global:key - global-scope key (e.g. __global:meta)
+ __sites:dbname - site mapping (e.g. __sites:enwiki)
+ Sites mapping just specifies site name, other keys provide
+ "local url" data layout.
+ $wgInterwikiScopes specify number of domains to check for messages:
+ 1 - Just wiki(db)-level
+ 2 - wiki and global levels
+ 3 - site levels
+ $wgInterwikiFallbackSite - if unable to resolve from cache
+*/
+$wgInterwikiCache = false;
+$wgInterwikiScopes = 3;
+$wgInterwikiFallbackSite = 'wiki';
+
/**
* If local interwikis are set up which allow redirects,
* set this regexp to restrict URLs which will be displayed
$wgShowIPinHeader = true; # For non-logged in users
-$wgMaxNameChars = 32; # Maximum number of bytes in username
+$wgMaxNameChars = 255; # Maximum number of bytes in username
+$wgMaxArticleSize = 2048; # Maximum article size in kilobytes
$wgExtraSubtitle = '';
$wgSiteSupportPage = ''; # A page where you users can receive donations
/**
* The debug log file should be not be publicly accessible if it is used, as it
* may contain private data. */
-$wgDebugLogFile = 'deb.txt';
+$wgDebugLogFile = '';
/**#@+
* @global bool
$wgDebugRawPage = false; # Avoid overlapping debug entries by leaving out CSS
$wgDebugComments = false;
-$wgReadOnly = false;
+$wgReadOnly = null;
$wgLogQueries = false;
+
+/**
+ * Write SQL queries to the debug log
+ */
$wgDebugDumpSql = false;
+/**
+ * Set to an array of log group keys to filenames.
+ * If set, wfDebugLog() output for that group will go to that file instead
+ * of the regular $wgDebugLogFile. Useful for enabling selective logging
+ * in production.
+ */
+$wgDebugLogGroups = array();
+
/**
* Whether to show "we're sorry, but there has been a database error" pages.
* Displaying errors aids in debugging, but may display information useful
*/
$wgShowSQLErrors = false;
-# Should [[Category:Dog]] on a page associate it with the
-# category "Dog"? (a link to that category page will be
-# added to the article, clicking it reveals a list of
-# all articles in the category)
-$wgUseCategoryMagic = true;
-
/**
* disable experimental dmoz-like category browsing. Output things like:
* Encyclopedia > Music > Style of Music > Jazz
*/
$wgUseCategoryBrowser = false;
-$wgEnablePersistentLC = false; # Obsolete, do not use
-$wgCompressedPersistentLC = true; # use gzcompressed blobs
-$wgUseOldExistenceCheck = false; # use old prefill link method, for debugging only
-
/**
* Keep parsed pages in a cache (objectcache table, turck, or memcached)
* to speed up output of the same page viewed by another user with the
*/
$wgEnableParserCache = true;
+/**
+ * Under which condition should a page in the main namespace be counted
+ * as a valid article? If $wgUseCommaCount is set to true, it will be
+ * counted if it contains at least one comma. If it is set to false
+ * (default), it will only be counted if it contains at least one [[wiki
+ * link]]. See http://meta.wikimedia.org/wiki/Help:Article_count
+ *
+ * Retroactively changing this variable will not affect
+ * the existing count (cf. maintenance/recount.sql).
+*/
+$wgUseCommaCount = false;
+
/**#@-*/
/**
*/
$wgHitcounterUpdateFreq = 1;
-# User rights settings
-#
-# It's not 100% safe, there could be security hole using that one. Use at your
-# own risks.
+# Basic user rights and block settings
+$wgSysopUserBans = true; # Allow sysops to ban logged-in users
+$wgSysopRangeBans = true; # Allow sysops to ban IP ranges
+$wgAutoblockExpiry = 86400; # Number of seconds before autoblock entries expire
+$wgBlockAllowsUTEdit = false; # Blocks allow users to edit their own user talk page
+
+# Pages anonymous user may see as an array, e.g.:
+# array ( "Main Page", "Special:Userlogin", "Wikipedia:Help");
+# NOTE: This will only work if $wgGroupPermissions['*']['read']
+# is false -- see below. Otherwise, ALL pages are accessible,
+# regardless of this setting.
+# Also note that this will only protect _pages in the wiki_.
+# Uploaded files will remain readable. Make your upload
+# directory name unguessable, or use .htaccess to protect it.
+$wgWhitelistRead = false;
+
+/**
+ * Should editors be required to have a validated e-mail
+ * address before being allowed to edit?
+ */
+$wgEmailConfirmToEdit=false;
-$wgWhitelistEdit = false; # true = user must login to edit.
-$wgWhitelistRead = false; # Pages anonymous user may see, like: = array ( ":Main_Page", "Special:Userlogin", "Wikipedia:Help");
-$wgWhitelistAccount = array ( 'user' => 1, 'sysop' => 1, 'developer' => 1 );
+/**
+ * Permission keys given to users in each group.
+ * All users are implicitly in the '*' group including anonymous visitors;
+ * logged-in users are all implicitly in the 'user' group. These will be
+ * combined with the permissions of all groups that a given user is listed
+ * in in the user_groups table.
+ *
+ * Functionality to make pages inaccessible has not been extensively tested
+ * for security. Use at your own risk!
+ *
+ * This replaces wgWhitelistAccount and wgWhitelistEdit
+ */
+$wgGroupPermissions = array();
-$wgAllowAnonymousMinor = false; # Allow anonymous users to mark changes as 'minor'
+// Implicit group for all visitors
+$wgGroupPermissions['*' ]['createaccount'] = true;
+$wgGroupPermissions['*' ]['read'] = true;
+$wgGroupPermissions['*' ]['edit'] = true;
+$wgGroupPermissions['*' ]['createpage'] = true;
+$wgGroupPermissions['*' ]['createtalk'] = true;
-$wgSysopUserBans = false; # Allow sysops to ban logged-in users
-$wgSysopRangeBans = false; # Allow sysops to ban IP ranges
+// Implicit group for all logged-in accounts
+$wgGroupPermissions['user' ]['move'] = true;
+$wgGroupPermissions['user' ]['read'] = true;
+$wgGroupPermissions['user' ]['edit'] = true;
+$wgGroupPermissions['user' ]['createpage'] = true;
+$wgGroupPermissions['user' ]['createtalk'] = true;
+$wgGroupPermissions['user' ]['upload'] = true;
+$wgGroupPermissions['user' ]['reupload'] = true;
+$wgGroupPermissions['user' ]['reupload-shared'] = true;
+$wgGroupPermissions['user' ]['minoredit'] = true;
+
+// Implicit group for accounts that pass $wgAutoConfirmAge
+$wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true;
+
+// Users with bot privilege can have their edits hidden
+// from various log pages by default
+$wgGroupPermissions['bot' ]['bot'] = true;
+$wgGroupPermissions['bot' ]['autoconfirmed'] = true;
+
+// Most extra permission abilities go to this group
+$wgGroupPermissions['sysop']['block'] = true;
+$wgGroupPermissions['sysop']['createaccount'] = true;
+$wgGroupPermissions['sysop']['delete'] = true;
+$wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text
+$wgGroupPermissions['sysop']['editinterface'] = true;
+$wgGroupPermissions['sysop']['import'] = true;
+$wgGroupPermissions['sysop']['importupload'] = true;
+$wgGroupPermissions['sysop']['move'] = true;
+$wgGroupPermissions['sysop']['patrol'] = true;
+$wgGroupPermissions['sysop']['protect'] = true;
+$wgGroupPermissions['sysop']['rollback'] = true;
+$wgGroupPermissions['sysop']['upload'] = true;
+$wgGroupPermissions['sysop']['reupload'] = true;
+$wgGroupPermissions['sysop']['reupload-shared'] = true;
+$wgGroupPermissions['sysop']['unwatchedpages'] = true;
+$wgGroupPermissions['sysop']['autoconfirmed'] = true;
+
+// Permission to change users' group assignments
+$wgGroupPermissions['bureaucrat']['userrights'] = true;
+
+// Experimental permissions, not ready for production use
+//$wgGroupPermissions['sysop']['deleterevision'] = true;
+//$wgGroupPermissions['bureaucrat']['hiderevision'] = true;
+
+/**
+ * The developer group is deprecated, but can be activated if need be
+ * to use the 'lockdb' and 'unlockdb' special pages. Those require
+ * that a lock file be defined and creatable/removable by the web
+ * server.
+ */
+# $wgGroupPermissions['developer']['siteadmin'] = true;
+
+/**
+ * Set of available actions that can be restricted via Special:Protect
+ * You probably shouldn't change this.
+ * Translated trough restriction-* messages.
+ */
+$wgRestrictionTypes = array( 'edit', 'move' );
+
+/**
+ * Set of permission keys that can be selected via Special:Protect.
+ * 'autoconfirm' allows all registerd users if $wgAutoConfirmAge is 0.
+ */
+$wgRestrictionLevels = array( '', 'autoconfirmed', 'sysop' );
+
+
+/**
+ * Number of seconds an account is required to age before
+ * it's given the implicit 'autoconfirm' group membership.
+ * This can be used to limit privileges of new accounts.
+ *
+ * Accounts created by earlier versions of the software
+ * may not have a recorded creation date, and will always
+ * be considered to pass the age test.
+ *
+ * When left at 0, all registered accounts will pass.
+ */
+$wgAutoConfirmAge = 0;
+//$wgAutoConfirmAge = 600; // ten minutes
+//$wgAutoConfirmAge = 3600*24; // one day
-/** Comma-separated list of options to show on the IP block form.
- * Use strtotime() format, or "infinite" for an infinite block
- */
-$wgBlockExpiryOptions = "2 hours,1 day,3 days,1 week,2 weeks,1 month,3 months,6 months,1 year,infinite";
-$wgAutoblockExpiry = 86400; # Number of seconds before autoblock entries expire
# Proxy scanner settings
#
/**
* If you enable this, every editor's IP address will be scanned for open HTTP
* proxies.
- *
+ *
* Don't enable this. Many sysops will report "hostile TCP port scans" to your
* ISP and ask for your server to be shut down.
- *
+ *
* You have been warned.
*/
$wgBlockOpenProxies = false;
/**
* Set this to current time to invalidate all prior cached pages. Affects both
* client- and server-side caching.
+ * You can get the current date on your server by using the command:
+ * date +%Y%m%d%H%M%S
*/
$wgCacheEpoch = '20030516000000';
* This will cache static pages for non-logged-in users to reduce
* database traffic on public sites.
* Must set $wgShowIPinHeader = false
- */
+ */
$wgUseFileCache = false;
/** Directory where the cached page will be saved */
$wgFileCacheDirectory = "{$wgUploadDirectory}/cache";
* space. Pages will then also be served compressed to clients that support it.
* THIS IS NOT COMPATIBLE with ob_gzhandler which is now enabled if supported in
* the default LocalSettings.php! If you enable this, remove that setting first.
- *
+ *
* Requires zlib support enabled in PHP.
*/
$wgUseGzip = false;
# Email notification settings
#
-/**
- * Program to run when the email is actually sent out. You might want to make
- * your server beep for example. Usermailer.php will make a system() call with
- * exactly that string as parameter.
- */
-# $wgEmailNotificationSystembeep = '/usr/bin/beep -f 4000 -l 20 &';
-$wgEmailNotificationSystembeep = '';
-
/** For email notification on page changes */
$wgPasswordSender = $wgEmergencyContact;
-# true: from PageEditor if s/he opted-in
+# true: from page editor if s/he opted-in
# false: Enotif mails appear to come from $wgEmergencyContact
-$wgEmailNotificationMailsSentFromPageEditor = false;
+$wgEnotifFromEditor = false;
// TODO move UPO to preferences probably ?
# If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion
# If set to false, the corresponding input form on the user preference page is suppressed
# It call this to be a "user-preferences-option (UPO)"
$wgEmailAuthentication = true; # UPO (if this is set to false, texts referring to authentication are suppressed)
-$wgEmailNotificationForWatchlistPages = false; # UPO
-$wgEmailNotificationForUserTalkPages = false; # UPO
-$wgEmailNotificationRevealPageEditorAddress = false; # UPO; reply-to address may be filled with page editor's address (if user allowed this in the preferences)
-$wgEmailNotificationForMinorEdits = true; # UPO; false: "minor edits" on pages do not trigger notification mails.
+$wgEnotifWatchlist = false; # UPO
+$wgEnotifUserTalk = false; # UPO
+$wgEnotifRevealEditorAddress = false; # UPO; reply-to address may be filled with page editor's address (if user allowed this in the preferences)
+$wgEnotifMinorEdits = true; # UPO; false: "minor edits" on pages do not trigger notification mails.
# # Attention: _every_ change on a user_talk page trigger a notification mail (if the user is not yet notified)
/**
* Show "Updated (since my last visit)" marker in RC view, watchlist and history
* view for watched pages with new changes */
-$wgShowUpdatedMarker = true; # UPO
+$wgShowUpdatedMarker = true;
$wgCookieExpiration = 2592000;
+/** Clock skew or the one-second resolution of time() can occasionally cause cache
+ * problems when the user requests two pages within a short period of time. This
+ * variable adds a given number of seconds to vulnerable timestamps, thereby giving
+ * a grace period.
+ */
+$wgClockSkewFudge = 5;
+
# Squid-related settings
#
/** Enable/disable Squid */
$wgUseSquid = false;
-
+
/** If you run Squid3 with ESI support, enable this (default:false): */
$wgUseESI = false;
-
+
/** Internal server name as known to Squid, if different */
# $wgInternalServer = 'http://yourinternal.tld:8000';
$wgInternalServer = $wgServer;
-
+
/**
* Cache timeout for the squid, will be sent as s-maxage (without ESI) or
* Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in
* days
*/
$wgSquidMaxage = 18000;
-
+
/**
* A list of proxy servers (ips if possible) to purge on changes don't specify
* ports here (80 is default)
/** Maximum number of titles to purge in any one client operation */
$wgMaxSquidPurgeTitles = 400;
+/** HTCP multicast purging */
+$wgHTCPPort = 4827;
+$wgHTCPMulticastTTL = 1;
+# $wgHTCPMulticastAddress = "224.0.0.85";
# Cookie settings:
#
*/
$wgCookieDomain = '';
$wgCookiePath = '/';
+$wgCookieSecure = ($wgProto == 'https');
$wgDisableCookieCheck = false;
/** Whether to allow inline image pointing to other websites */
$wgAllowExternalImages = true;
+/** If the above is false, you can specify an exception here. Image URLs
+ * that start with this string are then rendered, while all others are not.
+ * You can use this to set up a trusted, simple repository of images.
+ *
+ * Example:
+ * $wgAllowExternalImagesFrom = 'http://127.0.0.1/';
+ */
+$wgAllowExternalImagesFrom = '';
+
/** Disable database-intensive features */
$wgMiserMode = false;
/** Disable all query pages if miser mode is on, not just some */
$wgUseWatchlistCache = false;
/** The hour or so mentioned above */
$wgWLCacheTimeout = 3600;
+/** Number of links to a page required before it is deemed "wanted" */
+$wgWantedPagesThreshold = 1;
/**
* To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory of
#
/** Enable for more detailed by-function times in debug log */
-$wgProfiling = false;
+$wgProfiling = false;
/** Only record profiling info for pages that took longer than this */
$wgProfileLimit = 0.0;
/** Don't put non-profiling info into log file */
-$wgProfileOnly = false;
+$wgProfileOnly = false;
/** Log sums from profiling into "profiling" table in db. */
$wgProfileToDatabase = false;
/** Only profile every n requests when profiling is turned on */
$wgProfileSampleRate = 1;
/** If true, print a raw call tree instead of per-function report */
-$wgProfileCallTree = false;
+$wgProfileCallTree = false;
+/** If not empty, specifies profiler type to load */
+$wgProfilerType = '';
+
+/** Settings for UDP profiler */
+$wgUDPProfilerHost = '127.0.0.1';
+$wgUDPProfilerPort = '3811';
/** Detects non-matching wfProfileIn/wfProfileOut calls */
$wgDebugProfiling = false;
$wgDisableCounters = false;
$wgDisableTextSearch = false;
+$wgDisableSearchContext = false;
/**
* If you've disabled search semi-permanently, this also disables updates to the
* table. If you ever re-enable, be sure to rebuild the search table.
*/
$wgDisableSearchUpdate = false;
/** Uploads have to be specially set up to be secure */
-$wgDisableUploads = true;
+$wgEnableUploads = false;
+/**
+ * Show EXIF data, on by default if available.
+ * Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php
+ */
+$wgShowEXIF = function_exists( 'exif_read_data' );
+
/**
* Set to true to enable the upload _link_ while local uploads are disabled.
* Assumes that the special page link will be bounced to another server where
* uploads do work.
*/
-$wgRemoteUploads = false;
+$wgRemoteUploads = false;
$wgDisableAnonTalk = false;
+/**
+ * Do DELETE/INSERT for link updates instead of incremental
+ */
+$wgUseDumbLinkUpdate = false;
+
+/**
+ * Anti-lock flags - bitfield
+ * ALF_PRELOAD_LINKS
+ * Preload links during link update for save
+ * ALF_PRELOAD_EXISTENCE
+ * Preload cur_id during replaceLinkHolders
+ * ALF_NO_LINK_LOCK
+ * Don't use locking reads when updating the link table. This is
+ * necessary for wikis with a high edit rate for performance
+ * reasons, but may cause link table inconsistency
+ * ALF_NO_BLOCK_LOCK
+ * As for ALF_LINK_LOCK, this flag is a necessity for high-traffic
+ * wikis.
+ */
+$wgAntiLockFlags = 0;
/**
* Path to the GNU diff3 utility. If the file doesn't exist, edit conflicts will
*/
$wgDiff3 = '/usr/bin/diff3';
-/**
+/**
* We can also compress text in the old revisions table. If this is set on, old
* revisions will be compressed on page save if zlib support is available. Any
* compressed revisions will be decompressed on load regardless of this setting
/** Files with these extensions will never be allowed as uploads. */
$wgFileBlacklist = array(
# HTML may contain cookie-stealing JavaScript and web bugs
- 'html', 'htm',
+ 'html', 'htm', 'js', 'jsb',
# PHP scripts may execute arbitrary code on the server
'php', 'phtml', 'php3', 'php4', 'phps',
# Other types that may be interpreted by some servers
# May contain harmful executables for Windows victims
'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' );
+/** Files with these mime types will never be allowed as uploads
+ * if $wgVerifyMimeType is enabled.
+ */
+$wgMimeTypeBlacklist= array(
+ # HTML may contain cookie-stealing JavaScript and web bugs
+ 'text/html', 'text/javascript', 'text/x-javascript', 'application/x-shellscript',
+ # PHP scripts may execute arbitrary code on the server
+ 'application/x-php', 'text/x-php',
+ # Other types that may be interpreted by some servers
+ 'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh',
+ # Windows metafile, client-side vulnerability on some systems
+ 'application/x-msmetafile'
+);
+
/** This is a flag to determine whether or not to check file extensions on upload. */
$wgCheckFileExtensions = true;
$wgStrictFileExtensions = true;
/** Warn if uploaded files are larger than this */
-$wgUploadSizeWarning = 150000;
+$wgUploadSizeWarning = 150 * 1024;
/** For compatibility with old installations set to false */
-$wgPasswordSalt = true;
+$wgPasswordSalt = true;
/** Which namespaces should support subpages?
* See Language.php for a list of namespaces.
*/
-$wgNamespacesWithSubpages = array( -1 => 0, 0 => 0, 1 => 1,
- 2 => 1, 3 => 1, 4 => 0, 5 => 1, 6 => 0, 7 => 1, 8 => 0, 9 => 1, 10 => 0, 11 => 1);
-
-$wgNamespacesToBeSearchedDefault = array( -1 => 0, 0 => 1, 1 => 0,
- 2 => 0, 3 => 0, 4 => 0, 5 => 0, 6 => 0, 7 => 0, 8 => 0, 9 => 1, 10 => 0, 11 => 1 );
+$wgNamespacesWithSubpages = array(
+ NS_TALK => true,
+ NS_USER => true,
+ NS_USER_TALK => true,
+ NS_PROJECT_TALK => true,
+ NS_IMAGE_TALK => true,
+ NS_MEDIAWIKI_TALK => true,
+ NS_TEMPLATE_TALK => true,
+ NS_HELP_TALK => true,
+ NS_CATEGORY_TALK => true
+ );
+
+$wgNamespacesToBeSearchedDefault = array(
+ NS_MAIN => true,
+);
/** If set, a bold ugly notice will show up at the top of every page. */
$wgSiteNotice = '';
/**
* Resizing can be done using PHP's internal image libraries or using
- * ImageMagick. The later supports more file formats than PHP, which only
- * supports PNG, GIF, JPG, XBM and WBMP.
- *
+ * ImageMagick or another third-party converter, e.g. GraphicMagick.
+ * These support more file formats than PHP, which only supports PNG,
+ * GIF, JPG, XBM and WBMP.
+ *
* Use Image Magick instead of PHP builtin functions.
*/
$wgUseImageMagick = false;
/** The convert command shipped with ImageMagick */
$wgImageMagickConvertCommand = '/usr/bin/convert';
+/**
+ * Use another resizing converter, e.g. GraphicMagick
+ * %s will be replaced with the source path, %d with the destination
+ * %w and %h will be replaced with the width and height
+ *
+ * An example is provided for GraphicMagick
+ * Leave as false to skip this
+ */
+#$wgCustomConvertCommand = "gm convert %s -resize %wx%h %d"
+$wgCustomConvertCommand = false;
+
# Scalable Vector Graphics (SVG) may be uploaded as images.
# Since SVG support is not yet standard in browsers, it is
# necessary to rasterize SVGs to PNG as a fallback format.
'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input',
+ 'rsvg' => '$path/rsvg -w$width -h$height $input $output',
);
/** Pick one of the above */
$wgSVGConverter = 'ImageMagick';
/** If not in the executable PATH, specify */
$wgSVGConverterPath = '';
+/** Don't scale a SVG larger than this */
+$wgSVGMaxSize = 1024;
+/**
+ * Don't thumbnail an image if it will use too much working memory
+ * Default is 50 MB if decompressed to RGBA form, which corresponds to
+ * 12.5 million pixels or 3500x3500
+ */
+$wgMaxImageArea = 1.25e7;
+/**
+ * If rendered thumbnail files are older than this timestamp, they
+ * will be rerendered on demand as if the file didn't already exist.
+ * Update if there is some need to force thumbs and SVG rasterizations
+ * to rerender, such as fixes to rendering bugs.
+ */
+$wgThumbnailEpoch = '20030516000000';
+
-/** @todo FIXME what does it do here ?? [ashar] */
+
+/** Set $wgCommandLineMode if it's not set already, to avoid notices */
if( !isset( $wgCommandLineMode ) ) {
$wgCommandLineMode = false;
}
# Recent changes settings
#
-/** Show seconds in Recent Changes */
-$wgRCSeconds = false;
-
/** Log IP addresses in the recentchanges table */
-$wgPutIPinRC = false;
+$wgPutIPinRC = true;
/**
* Recentchanges items are periodically purged; entries older than this many
$wgRCMaxAge = 7 * 24 * 3600;
+# Send RC updates via UDP
+$wgRC2UDPAddress = false;
+$wgRC2UDPPort = false;
+$wgRC2UDPPrefix = '';
+
#
# Copyright and credits settings
#
/**
* Set this to the number of authors that you want to be credited below an
* article text. Set it to zero to hide the attribution block, and a negative
- * number (like -1) to show all authors. Note that this will# require 2-3 extra
+ * number (like -1) to show all authors. Note that this will require 2-3 extra
* database hits, which can have a not insignificant impact on performance for
* large wikis.
*/
/**
* List of interwiki prefixes for wikis we'll accept as sources for
- * Special:Import (for sysops). Since complete page history# can be imported,
+ * Special:Import (for sysops). Since complete page history can be imported,
* these should be 'trusted'.
+ *
+ * If a user has the 'import' permission but not the 'importupload' permission,
+ * they will only be able to run imports through this transwiki interface.
*/
$wgImportSources = array();
+/**
+ * If set to false, disables the full-history option on Special:Export.
+ * This is currently poorly optimized for long edit histories, so is
+ * disabled on Wikimedia's sites.
+ */
+$wgExportAllowHistory = true;
+$wgExportAllowListContributors = false ;
/** Text matching this regular expression will be recognised as spam
* See http://en.wikipedia.org/wiki/Regular_expression */
-$wgSpamRegex = false;
+$wgSpamRegex = false;
/** Similarly if this function returns true */
$wgFilterCallback = false;
$wgUserHtml = true;
/** Allow raw, unchecked HTML in <html>...</html> sections.
- * THIS IS VERY DANGEROUS on a publically editable site, so you can't enable it
- * unless you've restricted editing to trusted users only with $wgWhitelistEdit.
+ * THIS IS VERY DANGEROUS on a publically editable site, so USE wgGroupPermissions
+ * TO RESTRICT EDITING to only those that you trust
*/
$wgRawHtml = false;
* $wgTidyBin should be set to the path of the binary and
* $wgTidyConf to the path of the configuration file.
* $wgTidyOpts can include any number of parameters.
+ *
+ * $wgTidyInternal controls the use of the PECL extension to use an in-
+ * process tidy library instead of spawning a separate program.
+ * Normally you shouldn't need to override the setting except for
+ * debugging. To install, use 'pear install tidy' and add a line
+ * 'extension=tidy.so' to php.ini.
*/
$wgUseTidy = false;
+$wgAlwaysUseTidy = false;
$wgTidyBin = 'tidy';
-$wgTidyConf = $IP.'/extensions/tidy/tidy.conf';
+$wgTidyConf = $IP.'/extensions/tidy/tidy.conf';
$wgTidyOpts = '';
+$wgTidyInternal = function_exists( 'tidy_load_config' );
-/** See list of skins and their symbolic names in languagel/Language.php */
+/** See list of skins and their symbolic names in languages/Language.php */
$wgDefaultSkin = 'monobook';
/**
* and sample values in languages/Language.php)
* For instance, to disable section editing links:
* $wgDefaultUserOptions ['editsection'] = 0;
- *
+ *
*/
$wgDefaultUserOptions = array();
/** Extensions */
$wgSkinExtensionFunctions = array();
$wgExtensionFunctions = array();
+/**
+ * An array of extension types and inside that their names, versions, authors
+ * and urls, note that the version and url key can be omitted.
+ *
+ * <code>
+ * $wgExtensionCredits[$type][] = array(
+ * 'name' => 'Example extension',
+ * 'version' => 1.9,
+ * 'author' => 'Foo Barstein',
+ * 'url' => 'http://wwww.example.com/Example%20Extension/',
+ * );
+ * </code>
+ *
+ * Where $type is 'specialpage', 'parserhook', or 'other'.
+ */
+$wgExtensionCredits = array();
/**
* Allow user Javascript page?
/** Use the site's Cascading Style Sheets (CSS)? */
$wgUseSiteCss = true;
-
+
/** Filter for Special:Randompage. Part of a WHERE clause */
$wgExtraRandompageSQL = false;
/** Maximum indent level of toc. */
$wgMaxTocLevel = 999;
-/** Use external C++ diff engine (module wikidiff from the extensions package) */
-$wgUseExternalDiffEngine = false;
+/** Name of the external diff engine to use */
+$wgExternalDiffEngine = false;
/** Use RC Patrolling to check for vandalism */
$wgUseRCPatrol = true;
/** _Minimum_ timeout for cached Recentchanges feed, in seconds.
* A cached version will continue to be served out even if changes
- * are made, until this many seconds runs out since the last render. */
+ * are made, until this many seconds runs out since the last render.
+ *
+ * If set to 0, feed caching is disabled. Use this for debugging only;
+ * feed generation can be pretty slow with diffs.
+ */
$wgFeedCacheTimeout = 60;
/** When generating Recentchanges RSS/Atom feed, diffs will not be generated for
/**
* Additional namespaces. If the namespaces defined in Language.php and
- * Namespace.php are insufficient,# you can create new ones here, for example,
+ * Namespace.php are insufficient, you can create new ones here, for example,
* to import Help files in other languages.
* PLEASE NOTE: Once you delete a namespace, the pages in that namespace will
* no longer be accessible. If you rename it, then you can access them through
* the new namespace name.
- *
- * Custom namespaces should start at 100 and stop at 255 (hard limit set by
- * database).
+ *
+ * Custom namespaces should start at 100 to avoid conflicting with standard
+ * namespaces, and should always follow the even/odd main/talk pattern.
*/
#$wgExtraNamespaces =
# array(100 => "Hilfe",
# );
$wgExtraNamespaces = NULL;
-/**
- * Enable SOAP interface. Off by default
- * SOAP is a protocoll for remote procedure calls (RPC) using http as
- * middleware. This interface can be used by bots or special clients to receive
- * articles from a wiki.
- * Most bots use the normal HTTP interface and don't use SOAP.
- * If unsure, set to false.
- */
-$wgEnableSOAP = false;
-
/**
* Limit images on image description pages to a user-selectable limit. In order
* to reduce disk usage, limits can only be selected from a list. This is the
array(1280,1024),
array(10000,10000) );
-
-/** Navigation links for the user sidebar.
- * 'text' is the name of the MediaWiki message that contains the label of this link
- * 'href' is the name of the MediaWiki message that contains the link target of this link.
- * Link targets starting with http are considered remote links. Ones not starting with
- * http are considered as names of local wiki pages.
- */
-$wgNavigationLinks = array (
- array( 'text'=>'mainpage', 'href'=>'mainpage' ),
- array( 'text'=>'portal', 'href'=>'portal-url' ),
- array( 'text'=>'currentevents', 'href'=>'currentevents-url' ),
- array( 'text'=>'recentchanges', 'href'=>'recentchanges-url' ),
- array( 'text'=>'randompage', 'href'=>'randompage-url' ),
- array( 'text'=>'help', 'href'=>'helppage' ),
- array( 'text'=>'sitesupport', 'href'=>'sitesupport-url' ),
+/**
+ * Adjust thumbnails on image pages according to a user setting. In order to
+ * reduce disk usage, the values can only be selected from a list. This is the
+ * list of settings the user can choose from:
+ */
+$wgThumbLimits = array(
+ 120,
+ 150,
+ 180,
+ 200,
+ 250,
+ 300
);
/**
*/
$wgCategoryMagicGallery = true;
+/**
+ * Paging limit for categories
+ */
+$wgCategoryPagingLimit = 200;
+
/**
* Browser Blacklist for unicode non compliant browsers
* Contains a list of regexps : "/regexp/" matching problematic browsers
*/
$wgBrowserBlackList = array(
- "/Mozilla\/4\.78 \[en\] \(X11; U; Linux/"
- // FIXME: Add some accurate, true things here
- );
+ "/Mozilla\/4\.78 \[en\] \(X11; U; Linux/",
+ /**
+ * MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH>
+ *
+ * Known useragents:
+ * - Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC)
+ * - Mozilla/4.0 (compatible; MSIE 5.15; Mac_PowerPC)
+ * - Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC)
+ * - [...]
+ *
+ * @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864
+ * @link http://en.wikipedia.org/wiki/Template%3AOS9
+ */
+ "/Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/"
+);
/**
* Fake out the timezone that the server thinks it's in. This will be used for
* date display and not for what's stored in the DB. Leave to null to retain
* your server's OS-based timezone value. This is the same as the timezone.
+ *
+ * This variable is currently used ONLY for signature formatting, not for
+ * anything else.
*/
# $wgLocaltimezone = 'GMT';
# $wgLocaltimezone = 'PST8PDT';
$wgLocaltimezone = null;
/**
- * User level management
- * The number is the database id of a group you want users to be attached by
- * default. A better interface should be coded [av]
+ * Set an offset from UTC in hours to use for the default timezone setting
+ * for anonymous users and new user accounts.
+ *
+ * This setting is used for most date/time displays in the software, and is
+ * overrideable in user preferences. It is *not* used for signature timestamps.
+ *
+ * You can set it to match the configured server timezone like this:
+ * $wgLocalTZoffset = date("Z") / 3600;
+ *
+ * If your server is not configured for the timezone you want, you can set
+ * this in conjunction with the signature timezone and override the TZ
+ * environment variable like so:
+ * $wgLocaltimezone="Europe/Berlin";
+ * putenv("TZ=$wgLocaltimezone");
+ * $wgLocalTZoffset = date("Z") / 3600;
+ *
+ * Leave at NULL to show times in universal time (UTC/GMT).
*/
-$wgAnonGroupId = 1;
-$wgLoggedInGroupId = 2;
-$wgSysopGroupId = 3;
-$wgBureaucratGroupId = 4;
+$wgLocalTZoffset = null;
+
/**
* When translating messages with wfMsg(), it is not always clear what should be
* $wgHooks['event_name'][] = array($function, $data);
* or:
* $wgHooks['event_name'][] = array($object, 'method');
- */
+ */
$wgHooks = array();
/**
* Set this to a URL to forward search requests to some external location.
* If the URL includes '$1', this will be replaced with the URL-encoded
* search term.
- *
+ *
* For example, to forward to Google you'd have something like:
* $wgSearchForwardUrl = 'http://www.google.com/search?q=$1' .
* '&domains=http://example.com' .
*/
$wgMinimalPasswordLength = 0;
-} else {
- die();
-}
+/**
+ * Activate external editor interface for files and pages
+ * See http://meta.wikimedia.org/wiki/Help:External_editors
+ */
+$wgUseExternalEditor = true;
+
+/** Whether or not to sort special pages in Special:Specialpages */
+
+$wgSortSpecialPages = true;
+
+/**
+ * Specify the name of a skin that should not be presented in the
+ * list of available skins.
+ * Use for blacklisting a skin which you do not want to remove
+ * from the .../skins/ directory
+ */
+$wgSkipSkin = '';
+$wgSkipSkins = array(); # More of the same
+
+/**
+ * Array of disabled article actions, e.g. view, edit, dublincore, delete, etc.
+ */
+$wgDisabledActions = array();
+
+/**
+ * Disable redirects to special pages and interwiki redirects, which use a 302 and have no "redirected from" link
+ */
+$wgDisableHardRedirects = false;
+
+/**
+ * Use http.dnsbl.sorbs.net to check for open proxies
+ */
+$wgEnableSorbs = false;
+
+/**
+ * Use opm.blitzed.org to check for open proxies.
+ * Not yet actually used.
+ */
+$wgEnableOpm = false;
+
+/**
+ * Proxy whitelist, list of addresses that are assumed to be non-proxy despite what the other
+ * methods might say
+ */
+$wgProxyWhitelist = array();
+
+/**
+ * Simple rate limiter options to brake edit floods.
+ * Maximum number actions allowed in the given number of seconds;
+ * after that the violating client receives HTTP 500 error pages
+ * until the period elapses.
+ *
+ * array( 4, 60 ) for a maximum of 4 hits in 60 seconds.
+ *
+ * This option set is experimental and likely to change.
+ * Requires memcached.
+ */
+$wgRateLimits = array(
+ 'edit' => array(
+ 'anon' => null, // for any and all anonymous edits (aggregate)
+ 'user' => null, // for each logged-in user
+ 'newbie' => null, // for each recent account; overrides 'user'
+ 'ip' => null, // for each anon and recent account
+ 'subnet' => null, // ... with final octet removed
+ ),
+ 'move' => array(
+ 'user' => null,
+ 'newbie' => null,
+ 'ip' => null,
+ 'subnet' => null,
+ ),
+ );
+
+/**
+ * Set to a filename to log rate limiter hits.
+ */
+$wgRateLimitLog = null;
+
+/**
+ * On Special:Unusedimages, consider images "used", if they are put
+ * into a category. Default (false) is not to count those as used.
+ */
+$wgCountCategorizedImagesAsUsed = false;
+
+/**
+ * External stores allow including content
+ * from non database sources following URL links
+ *
+ * Short names of ExternalStore classes may be specified in an array here:
+ * $wgExternalStores = array("http","file","custom")...
+ *
+ * CAUTION: Access to database might lead to code execution
+ */
+$wgExternalStores = false;
+
+/**
+ * An array of external mysql servers, e.g.
+ * $wgExternalServers = array( 'cluster1' => array( 'srv28', 'srv29', 'srv30' ) );
+ */
+$wgExternalServers = array();
+
+/**
+ * The place to put new revisions, false to put them in the local text table.
+ * Part of a URL, e.g. DB://cluster1
+ *
+ * Can be an array instead of a single string, to enable data distribution. Keys
+ * must be consecutive integers, starting at zero. Example:
+ *
+ * $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' );
+ *
+ */
+$wgDefaultExternalStore = false;
+
+/**
+* list of trusted media-types and mime types.
+* Use the MEDIATYPE_xxx constants to represent media types.
+* This list is used by Image::isSafeFile
+*
+* Types not listed here will have a warning about unsafe content
+* displayed on the images description page. It would also be possible
+* to use this for further restrictions, like disabling direct
+* [[media:...]] links for non-trusted formats.
+*/
+$wgTrustedMediaFormats= array(
+ MEDIATYPE_BITMAP, //all bitmap formats
+ MEDIATYPE_AUDIO, //all audio formats
+ MEDIATYPE_VIDEO, //all plain video formats
+ "image/svg", //svg (only needed if inline rendering of svg is not supported)
+ "application/pdf", //PDF files
+ #"application/x-shockwafe-flash", //flash/shockwave movie
+);
+
+/**
+ * Allow special page inclusions such as {{Special:Allpages}}
+ */
+$wgAllowSpecialInclusion = true;
+
+/**
+ * Timeout for HTTP requests done via CURL
+ */
+$wgHTTPTimeout = 3;
+
+/**
+ * Proxy to use for CURL requests.
+ */
+$wgHTTPProxy = false;
+
+/**
+ * Enable interwiki transcluding. Only when iw_trans=1.
+ */
+$wgEnableScaryTranscluding = false;
+/**
+ * Expiry time for interwiki transclusion
+ */
+$wgTranscludeCacheExpiry = 3600;
+
+/**
+ * Support blog-style "trackbacks" for articles. See
+ * http://www.sixapart.com/pronet/docs/trackback_spec for details.
+ */
+$wgUseTrackbacks = false;
+
+/**
+ * Enable filtering of robots in Special:Watchlist
+ */
+
+$wgFilterRobotsWL = false;
+
+/**
+ * Enable filtering of categories in Recentchanges
+ */
+$wgAllowCategorizedRecentChanges = false ;
+
+/**
+ * Number of jobs to perform per request. May be less than one in which case
+ * jobs are performed probabalistically. If this is zero, jobs will not be done
+ * during ordinary apache requests. In this case, maintenance/doJobs.php should
+ * be run periodically.
+ */
+$wgJobRunRate = 1;
+
+/**
+ * Log file for job execution
+ */
+$wgJobLogFile = false;
+
+/**
+ * Enable use of AJAX features, currently auto suggestion for the search bar
+ */
+$wgUseAjax = false;
+
+/**
+ * List of Ajax-callable functions
+ */
+$wgAjaxExportList = array( 'wfSajaxSearch' );
+
+
?>
dépôts / lhc / web / wiklou.git / blobdiff