*/
# This is not a valid entry point, perform no further processing unless MEDIAWIKI is defined
-if( defined( 'MEDIAWIKI' ) ) {
+if( !defined( 'MEDIAWIKI' ) ) {
+ die( "This file is part of MediaWiki and is not a valid entry point\n" );
+}
/** MediaWiki version number */
-$wgVersion = '1.5pre-alpha';
+$wgVersion = '1.5alpha1';
/** Name of the site. It must be changed in LocalSettings.php */
$wgSitename = 'MediaWiki';
/** Will be same as you set @see $wgSitename */
$wgMetaNamespace = FALSE;
+
/** URL of the server. It will be automaticly build including https mode */
$wgServer = '';
$wgServerName = $_SERVER['SERVER_NAME'];
} elseif( isset( $_SERVER['HOSTNAME'] ) ) {
$wgServerName = $_SERVER['HOSTNAME'];
+} elseif( isset( $_SERVER['HTTP_HOST'] ) ) {
+ $wgServerName = $_SERVER['HTTP_HOST'];
+} elseif( isset( $_SERVER['SERVER_ADDR'] ) ) {
+ $wgServerName = $_SERVER['SERVER_ADDR'];
} else {
- # FIXME: Fall back on... something else?
$wgServerName = 'localhost';
}
$wgProto = (isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] == 'on') ? 'https' : 'http';
$wgServer = $wgProto.'://' . $wgServerName;
-if( isset( $_SERVER['SERVER_PORT'] ) && $_SERVER['SERVER_PORT'] != 80 ) {
+# If the port is a non-standard one, add it to the URL
+if( isset( $_SERVER['SERVER_PORT'] )
+ && ( ( $wgProto == 'http' && $_SERVER['SERVER_PORT'] != 80 )
+ || ( $wgProto == 'https' && $_SERVER['SERVER_PORT'] != 443 ) ) ) {
+
$wgServer .= ":" . $_SERVER['SERVER_PORT'];
}
unset($wgProto);
*/
$wgStyleDirectory = "{$IP}/skins";
$wgStyleSheetPath = &$wgStylePath;
-$wgStyleSheetDirectory = &$wgStyleDirectory;
$wgArticlePath = "{$wgScript}?title=$1";
$wgUploadPath = "{$wgScriptPath}/upload";
$wgUploadDirectory = "{$IP}/upload";
$wgUploadBaseUrl = "";
/**#@-*/
+/** internal name of virus scanner. This servers as a key to the $wgAntivirusSetup array.
+ * Set this to NULL to disable virus scanning. If not null, every file uploaded will be scanned for viruses.
+ * @global string $wgAntivirus
+ */
+$wgAntivirus= NULL;
+
+/** Configuration for different virus scanners. This an associative array of associative arrays:
+ * it contains on setup array per known scanner type. The entry is selected by $wgAntivirus, i.e.
+ * valid values for $wgAntivirus are the keys defined in this array.
+ *
+ * The configuration array for each scanner contains the following keys: "command", "codemap", "messagepattern";
+ *
+ * "command" is the full command to call the virus scanner - %f will be replaced with the name of the
+ * file to scan. If not present, the filename will be appended to the command. Note that this must be
+ * overwritten if the scanner is not in the system path; in that case, plase set
+ * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full path.
+ *
+ * "codemap" is a mapping of exit code to return codes of the detectVirus function in SpecialUpload.
+ * An exit code mapped to AV_SCAN_FAILED causes the function to consider the scan to be failed. This will pass
+ * the file if $wgAntivirusRequired is not set.
+ * An exit code mapped to AV_SCAN_ABORTED causes the function to consider the file to have an usupported format,
+ * which is probably imune to virusses. This causes the file to pass.
+ * An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning no virus was found.
+ * All other codes (like AV_VIRUS_FOUND) will cause the function to report a virus.
+ * You may use "*" as a key in the array to catch all exit codes not mapped otherwise.
+ *
+ * "messagepattern" is a perl regular expression to extract the meaningful part of the scanners
+ * output. The relevant part should be matched as group one (\1).
+ * If not defined or the pattern does not match, the full message is shown to the user.
+ *
+ * @global array $wgAntivirusSetup
+ */
+$wgAntivirusSetup= array(
+
+ #setup for clamav
+ 'clamav' => array (
+ 'command' => "clamscan --no-summary ",
+
+ 'codemap'=> array (
+ "0"=> AV_NO_VIRUS, #no virus
+ "1"=> AV_VIRUS_FOUND, #virus found
+ "52"=> AV_SCAN_ABORTED, #unsupported file format (probably imune)
+ "*"=> AV_SCAN_FAILED, #else scan failed
+ ),
+
+ 'messagepattern'=> '/.*?:(.*)/sim',
+ ),
+
+ #setup for f-prot
+ 'f-prot' => array (
+ 'command' => "f-prot ",
+
+ 'codemap'=> array (
+ "0"=> AV_NO_VIRUS, #no virus
+ "3"=> AV_VIRUS_FOUND, #virus found
+ "6"=> AV_VIRUS_FOUND, #virus found
+ "*"=> AV_SCAN_FAILED, #else scan failed
+ ),
+
+ 'messagepattern'=> '/.*?Infection:(.*)$/m',
+ ),
+);
+
+
+/** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected.
+ * @global boolean $wgAntivirusRequired
+*/
+$wgAntivirusRequired= true;
+
+/** Determines if the mime type of uploaded files should be checked
+ * @global boolean $wgVerifyMimeType
+*/
+$wgVerifyMimeType= true;
+
+/** Sets the mime type definition file to use by MimeMagic.php.
+* @global string $wgMimeTypeFile
+*/
+#$wgMimeTypeFile= "/etc/mime.types";
+$wgMimeTypeFile= "includes/mime.types";
+#$wgMimeTypeFile= NULL; #use build in defaults only.
+
+/** Sets the mime type info file to use by MimeMagic.php.
+* @global string $wgMimeInfoFile
+*/
+$wgMimeInfoFile= "includes/mime.info";
+#$wgMimeInfoFile= NULL; #use build in defaults only.
+
+/** Switch for loading the FileInfo extension by PECL at runtime.
+* This should be used only if fileinfo is installed as a shared object / dynamic libary
+* @global string $wgLoadFileinfoExtension
+*/
+$wgLoadFileinfoExtension= false;
+
+/** Sets an external mime detector program. The command must print only the mime type to standard output.
+* the name of the file to process will be appended to the command given here.
+* If not set or NULL, mime_content_type will be used if available.
+* @global string $wgMimeTypeFile
+*/
+$wgMimeDetectorCommand= NULL; # use internal mime_content_type function, available since php 4.3.0
+#$wgMimeDetectorCommand= "file -bi" #use external mime detector (linux)
+
+/** Switch for trivial mime detection. Used by thumb.php to disable all fance things,
+* because only a few types of images are needed and file extensions can be trusted.
+*/
+$wgTrivialMimeDetection= false;
+
+/**
+ * Produce hashed HTML article paths. Used internally, do not set.
+ */
+$wgMakeDumpLinks = false;
+
+/**
+ * To set 'pretty' URL paths for actions other than
+ * plain page views, add to this array. For instance:
+ * 'edit' => "$wgScriptPath/edit/$1"
+ *
+ * There must be an appropriate script or rewrite rule
+ * in place to handle these URLs.
+ */
+$wgActionPaths = array();
+
/**
* If you operate multiple wikis, you can define a shared upload path here.
* Uploads to this wiki will NOT be put there - they will be put into
$wgUseSharedUploads = false;
/** Full path on the web server where shared uploads can be found */
$wgSharedUploadPath = "http://commons.wikimedia.org/shared/images";
-/** Path on the file system where shared uploads can be found */
+/** Path on the file system where shared uploads can be found. */
$wgSharedUploadDirectory = "/var/www/wiki3/images";
+/** DB name with metadata about shared directory. Set this to false if the uploads do not come from a wiki. */
+$wgSharedUploadDBname = false;
+/** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */
+$wgCacheSharedUploads = true;
+
+/**
+ * Point the upload navigation link to an external URL
+ * Useful if you want to use a shared repository by default
+ * without disabling local uploads
+ * e.g. $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
+*/
+$wgUploadNavigationUrl = false;
+
+/**
+ * Give a path here to use thumb.php for thumbnail generation on client request, instead of
+ * generating them on render and outputting a static URL. This is necessary if some of your
+ * apache servers don't have read/write access to the thumbnail path.
+ *
+ * Example:
+ * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb.php";
+ */
+$wgThumbnailScriptPath = false;
+$wgSharedThumbnailScriptPath = false;
/**
* Set the following to false especially if you have a set of files that need to
*/
$wgHashedSharedUploadDirectory = true;
-/** set true if the repository uses latin1 filenames */
-$wgSharedLatin1=false;
-
/**
* Base URL for a repository wiki. Leave this blank if uploads are just stored
* in a shared directory and not meant to be accessible through a separate wiki.
*/
$wgDBtype = "mysql";
/** Search type
- * "MyISAM" for MySQL native full text search, "Tsearch2" for PostgreSQL
- * based search engine
+ * Leave as null to select the default search engine for the
+ * selected database type (eg SearchMySQL4), or set to a class
+ * name to override to a custom search engine.
*/
-$wgSearchType = "MyISAM";
+$wgSearchType = null;
/** Table name prefix */
$wgDBprefix = '';
/** Database schema
# Database load balancer
# This is a two-dimensional array, an array of server info structures
# Fields are:
-# host: Host name
-# dbname: Default database name
-# user: DB user
-# password: DB password
-# type: "mysql" or "pgsql"
-# load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
-# flags: bit field
-# DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
-# DBO_DEBUG -- equivalent of $wgDebugDumpSql
-# DBO_TRX -- wrap entire request in a transaction
-# DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
-# DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
+# host: Host name
+# dbname: Default database name
+# user: DB user
+# password: DB password
+# type: "mysql" or "pgsql"
+# load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
+# groupLoads: array of load ratios, the key is the query group name. A query may belong
+# to several groups, the most specific group defined here is used.
+#
+# flags: bit field
+# DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
+# DBO_DEBUG -- equivalent of $wgDebugDumpSql
+# DBO_TRX -- wrap entire request in a transaction
+# DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
+# DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
#
# Leave at false to use the single-server variables above
$wgDBservers = false;
/** How long to wait for a slave to catch up to the master */
$wgMasterWaitTimeout = 10;
-# Sysop SQL queries
-# The sql user shouldn't have too many rights other the database, restrict
-# it to SELECT only on 'page', 'revision' and 'text' tables for example
-#
-/** Dangerous if not configured properly. */
-$wgAllowSysopQueries = false;
-$wgDBsqluser = 'sqluser';
-$wgDBsqlpassword = 'sqlpass';
-$wgDBpassword = 'userpass';
-$wgSqlLogFile = "{$wgUploadDirectory}/sqllog_mFhyRe6";
/** File to log MySQL errors to */
$wgDBerrorLog = false;
$wgDBtransactions = false;
/** Set to true to use enhanced fulltext search */
$wgDBmysql4 = false;
-$wgSqlTimeout = 30;
/**
* Other wikis on this site, can be administered from a single developer
*/
$wgLocalDatabases = array();
+/**
+ * Object cache settings
+ * See Defines.php for types
+ */
+$wgMainCacheType = CACHE_NONE;
+$wgMessageCacheType = CACHE_ANYTHING;
+$wgParserCacheType = CACHE_ANYTHING;
-# Memcached settings
-# See docs/memcached.doc
-#
-$wgMemCachedDebug = false; # Will be set to false in Setup.php, if the server isn't working
-$wgUseMemCached = false;
-$wgMemCachedServers = array( '127.0.0.1:11000' );
-$wgMemCachedDebug = false;
$wgSessionsInMemcached = false;
$wgLinkCacheMemcached = false; # Not fully tested
/**
- * Turck MMCache shared memory
- * You can use this for persistent caching where your wiki runs on a single
- * server. Enabled by default if Turck is installed. Mutually exclusive with
- * memcached, memcached is used if both are specified.
- *
- * @global bool $wgUseTurckShm Enable or disabled Turck MMCache
+ * Memcached-specific settings
+ * See docs/memcached.txt
*/
-$wgUseTurckShm = false;
+$wgMemCachedDebug = false; # Will be set to false in Setup.php, if the server isn't working
+$wgMemCachedServers = array( '127.0.0.1:11000' );
+$wgMemCachedDebug = false;
+
# Language settings
#
-/** Site language code, should be one of ./language/Language(.*).php */
+/** Site language code, should be one of ./languages/Language(.*).php */
$wgLanguageCode = 'en';
-/** Filename of a language file generated by dumpMessages.php */
-$wgLanguageFile = false;
-
/** Treat language links as magic connectors, not inline links */
$wgInterwikiMagic = true;
-/** LanguageUtf8.php normally overrides this */
-$wgInputEncoding = 'ISO-8859-1';
-/** unless you set the next option to true: */
-$wgOutputEncoding = 'ISO-8859-1';
-/** Enable ISO-8859-1 compatibility mode */
-$wgUseLatin1 = false;
+/** We speak UTF-8 all the time now, unless some oddities happen */
+$wgInputEncoding = 'UTF-8';
+$wgOutputEncoding = 'UTF-8';
$wgEditEncoding = '';
# Set this to eg 'ISO-8859-1' to perform character set
# en masse in the database before continuing as a UTF-8 wiki.
$wgLegacyEncoding = false;
+/**
+ * If set to true, the MediaWiki 1.4 to 1.5 schema conversion will
+ * create stub reference rows in the text table instead of copying
+ * the full text of all current entries from 'cur' to 'text'.
+ *
+ * This will speed up the conversion step for large sites, but
+ * requires that the cur table be kept around for those revisions
+ * to remain viewable.
+ *
+ * maintenance/migrateCurStubs.php can be used to complete the
+ * migration in the background once the wiki is back online.
+ *
+ * This option affects the updaters *only*. Any present cur stub
+ * revisions will be readable at runtime regardless of this setting.
+ */
+$wgLegacySchemaConversion = false;
+
$wgMimeType = 'text/html';
+$wgJsMimeType = 'text/javascript';
$wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN';
$wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
/** Enable to allow rewriting dates in page text.
* DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES */
$wgUseDynamicDates = false;
-/** Enable for English module to print dates as eg 'May 12' instead of '12 May' */
+/** Enable dates like 'May 12' instead of '12 May', this only takes effect if
+ * the interface is set to English
+ */
$wgAmericanDates = false;
/**
* For Hindi and Arabic use local numerals instead of Western style (0-9)
# Interface messages will be get from the database.
$wgUseDatabaseMessages = true;
$wgMsgCacheExpiry = 86400;
-$wgPartialMessageCache = false;
# Whether to enable language variant conversion. Currently only zh
# supports this function, to convert between Traditional and Simplified
# code, so that if it breaks, only zh will be affected
$wgDisableLangConversion = false;
+# Use article validation feature; turned off by default
+$wgUseValidation = false;
+$wgValidationForAnons = true ;
+
# Whether to use zhdaemon to perform Chinese text processing
# zhdaemon is under developement, so normally you don't want to
# use it unless for testing
$wgZhdaemonHost="localhost";
$wgZhdaemonPort=2004;
+/** Normally you can ignore this and it will be something
+ like $wgMetaNamespace . "_talk". In some languages, you
+ may want to set this manually for grammatical reasons.
+ It is currently only respected by those languages
+ where it might be relevant and where no automatic
+ grammar converter exists.
+*/
+$wgMetaNamespaceTalk = false;
+
# Miscellaneous configuration settings
#
$wgLocalInterwiki = 'w';
$wgInterwikiExpiry = 10800; # Expiry time for cache of interwiki table
+/**
+ * If local interwikis are set up which allow redirects,
+ * set this regexp to restrict URLs which will be displayed
+ * as 'redirected from' links.
+ *
+ * It might look something like this:
+ * $wgRedirectSources = '!^https?://[a-z-]+\.wikipedia\.org/!';
+ *
+ * Leave at false to avoid displaying any incoming redirect markers.
+ * This does not affect intra-wiki redirects, which don't change
+ * the URL.
+ */
+$wgRedirectSources = false;
+
+
$wgShowIPinHeader = true; # For non-logged in users
$wgMaxNameChars = 32; # Maximum number of bytes in username
$wgSiteSupportPage = ''; # A page where you users can receive donations
$wgReadOnlyFile = "{$wgUploadDirectory}/lock_yBgMBwiR";
-$wgUseData = false ;
/**
* The debug log file should be not be publicly accessible if it is used, as it
*/
$wgEnableParserCache = true;
+/**
+ * Under which condition should a page in the main namespace be counted
+ * as a valid article? If $wgUseCommaCount is set to true, it will be
+ * counted if it contains at least one comma. If it is set to false
+ * (default), it will only be counted if it contains at least one [[wiki
+ * link]]. See http://meta.wikimedia.org/wiki/Help:Article_count
+ *
+ * Retroactively changing this variable will not affect
+ * the existing count (cf. maintenance/recount.sql).
+*/
+$wgUseCommaCount = false;
+
/**#@-*/
/**
$wgAllowAnonymousMinor = false; # Allow anonymous users to mark changes as 'minor'
-$wgSysopUserBans = false; # Allow sysops to ban logged-in users
-$wgSysopRangeBans = false; # Allow sysops to ban IP ranges
-$wgDefaultBlockExpiry = '24 hours'; # default expiry time
- # strtotime format, or "infinite" for an infinite block
+$wgSysopUserBans = true; # Allow sysops to ban logged-in users
+$wgSysopRangeBans = true; # Allow sysops to ban IP ranges
+
+/** Comma-separated list of options to show on the IP block form.
+ * Use strtotime() format, or "infinite" for an infinite block
+ */
+$wgBlockExpiryOptions = "2 hours,1 day,3 days,1 week,2 weeks,1 month,3 months,6 months,1 year,infinite";
+
$wgAutoblockExpiry = 86400; # Number of seconds before autoblock entries expire
+/**
+ * Static user groups serialized record
+ * To avoid database access, you can set this to a user groups record as returned
+ * by Special:Groups with the magic parameter showrecord=1. This will however mean
+ * that you won't be able to edit them at runtime.
+ */
+$wgStaticGroups = false;
+
# Proxy scanner settings
#
$wgProxyScriptPath = "$IP/proxy_check.php";
/** */
$wgProxyMemcExpiry = 86400;
-/** */
-$wgProxyKey = 'W1svekXc5u6lZllTZOwnzEk1nbs';
+/** This should always be customised in LocalSettings.php */
+$wgSecretKey = false;
/** big list of banned IP addresses, in the keys not the values */
$wgProxyList = array();
+/** deprecated */
+$wgProxyKey = false;
/** Number of accounts each IP address may create, 0 to disable.
* Requires memcached */
# Email notification settings
#
-/**
- * Program to run when the email is actually sent out. You might want to make
- * your server beep for example. Usermailer.php will make a system() call with
- * exactly that string as parameter.
- */
-# $wgEmailNotificationSystembeep = '/usr/bin/beep -f 4000 -l 20 &';
-$wgEmailNotificationSystembeep = '';
-
/** For email notification on page changes */
$wgPasswordSender = $wgEmergencyContact;
-# true: from PageEditor if s/he opted-in
+# true: from page editor if s/he opted-in
# false: Enotif mails appear to come from $wgEmergencyContact
-$wgEmailNotificationMailsSentFromPageEditor = false;
+$wgEnotifFromEditor = false;
// TODO move UPO to preferences probably ?
# If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion
# If set to false, the corresponding input form on the user preference page is suppressed
# It call this to be a "user-preferences-option (UPO)"
$wgEmailAuthentication = true; # UPO (if this is set to false, texts referring to authentication are suppressed)
-$wgEmailNotificationForWatchlistPages = false; # UPO
-$wgEmailNotificationForUserTalkPages = false; # UPO
-$wgEmailNotificationRevealPageEditorAddress = false; # UPO; reply-to address may be filled with page editor's address (if user allowed this in the preferences)
-$wgEmailNotificationForMinorEdits = true; # UPO; false: "minor edits" on pages do not trigger notification mails.
+$wgEnotifWatchlist = false; # UPO
+$wgEnotifUserTalk = false; # UPO
+$wgEnotifRevealEditorAddress = false; # UPO; reply-to address may be filled with page editor's address (if user allowed this in the preferences)
+$wgEnotifMinorEdits = true; # UPO; false: "minor edits" on pages do not trigger notification mails.
# # Attention: _every_ change on a user_talk page trigger a notification mail (if the user is not yet notified)
/** Maximum number of titles to purge in any one client operation */
$wgMaxSquidPurgeTitles = 400;
+/** HTCP multicast purging */
+$wgHTCPPort = 4827;
+$wgHTCPMulticastTTL = 1;
+# $wgHTCPMulticastAddress = "224.0.0.85";
# Cookie settings:
#
*/
$wgDisableSearchUpdate = false;
/** Uploads have to be specially set up to be secure */
-$wgDisableUploads = true;
+$wgEnableUploads = false;
+/**
+ * Show EXIF data, on by default if available.
+ * Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php
+ */
+$wgShowEXIF = function_exists( 'exif_read_data' );
+
/**
* Set to true to enable the upload _link_ while local uploads are disabled.
* Assumes that the special page link will be bounced to another server where
/** Files with these extensions will never be allowed as uploads. */
$wgFileBlacklist = array(
# HTML may contain cookie-stealing JavaScript and web bugs
- 'html', 'htm',
+ 'html', 'htm', 'js', 'jsb',
# PHP scripts may execute arbitrary code on the server
'php', 'phtml', 'php3', 'php4', 'phps',
# Other types that may be interpreted by some servers
'shtml', 'jhtml', 'pl', 'py', 'cgi',
# May contain harmful executables for Windows victims
'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' );
+
+/** Files with these mime types will never be allowed as uploads
+ * if $wgVerifyMimeType is enabled.
+ */
+$wgMimeTypeBlacklist= array(
+ # HTML may contain cookie-stealing JavaScript and web bugs
+ 'text/html', 'text/javascript', 'text/x-javascript', 'application/x-shellscript',
+ # PHP scripts may execute arbitrary code on the server
+ 'application/x-php', 'text/x-php',
+ # Other types that may be interpreted by some servers
+ 'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh'
+);
/** This is a flag to determine whether or not to check file extensions on upload. */
$wgCheckFileExtensions = true;
$wgStrictFileExtensions = true;
/** Warn if uploaded files are larger than this */
-$wgUploadSizeWarning = 150000;
+$wgUploadSizeWarning = 150 * 1024;
/** For compatibility with old installations set to false */
$wgPasswordSalt = true;
/** Which namespaces should support subpages?
* See Language.php for a list of namespaces.
*/
-$wgNamespacesWithSubpages = array( -1 => 0, 0 => 0, 1 => 1,
- 2 => 1, 3 => 1, 4 => 0, 5 => 1, 6 => 0, 7 => 1, 8 => 0, 9 => 1, 10 => 0, 11 => 1);
-
-$wgNamespacesToBeSearchedDefault = array( -1 => 0, 0 => 1, 1 => 0,
- 2 => 0, 3 => 0, 4 => 0, 5 => 0, 6 => 0, 7 => 0, 8 => 0, 9 => 1, 10 => 0, 11 => 1 );
+$wgNamespacesWithSubpages = array(
+ NS_SPECIAL => 0,
+ NS_MAIN => 0,
+ NS_TALK => 1,
+ NS_USER => 1,
+ NS_USER_TALK => 1,
+ NS_PROJECT => 0,
+ NS_PROJECT_TALK => 1,
+ NS_IMAGE => 0,
+ NS_IMAGE_TALK => 1,
+ NS_MEDIAWIKI => 0,
+ NS_MEDIAWIKI_TALK => 1,
+ NS_TEMPLATE => 0,
+ NS_TEMPLATE_TALK => 1,
+ NS_HELP => 0,
+ NS_HELP_TALK => 1,
+ NS_CATEGORY => 0,
+ NS_CATEGORY_TALK => 1
+ );
+
+$wgNamespacesToBeSearchedDefault = array(
+ NS_SPECIAL => 0,
+ NS_MAIN => 1,
+ NS_TALK => 0,
+ NS_USER => 0,
+ NS_USER_TALK => 0,
+ NS_PROJECT => 0,
+ NS_PROJECT_TALK => 0,
+ NS_IMAGE => 0,
+ NS_IMAGE_TALK => 0,
+ NS_MEDIAWIKI => 0,
+ NS_MEDIAWIKI_TALK => 1,
+ NS_TEMPLATE => 1,
+ NS_TEMPLATE_TALK => 1,
+ NS_HELP => 0,
+ NS_HELP_TALK => 0,
+ NS_CATEGORY => 0,
+ NS_CATEGORY_TALK => 0
+);
/** If set, a bold ugly notice will show up at the top of every page. */
$wgSiteNotice = '';
# Recent changes settings
#
-/** Show seconds in Recent Changes */
-$wgRCSeconds = false;
-
/** Log IP addresses in the recentchanges table */
$wgPutIPinRC = false;
* $wgTidyBin should be set to the path of the binary and
* $wgTidyConf to the path of the configuration file.
* $wgTidyOpts can include any number of parameters.
+ *
+ * $wgTidyInternal controls the use of the PECL extension to use an in-
+ * process tidy library instead of spawning a separate program.
+ * Normally you shouldn't need to override the setting except for
+ * debugging. To install, use 'pear install tidy' and add a line
+ * 'extension=tidy.so' to php.ini.
*/
$wgUseTidy = false;
$wgTidyBin = 'tidy';
$wgTidyConf = $IP.'/extensions/tidy/tidy.conf';
$wgTidyOpts = '';
+$wgTidyInternal = function_exists( 'tidy_load_config' );
-/** See list of skins and their symbolic names in languagel/Language.php */
+/** See list of skins and their symbolic names in languages/Language.php */
$wgDefaultSkin = 'monobook';
/**
/** Maximum indent level of toc. */
$wgMaxTocLevel = 999;
-/** Recognise longitude/latitude coordinates */
-$wgUseGeoMode = false;
-
-/** Validation for print or other production versions */
-$wgUseValidation = false;
-
/** Use external C++ diff engine (module wikidiff from the extensions package) */
$wgUseExternalDiffEngine = false;
* no longer be accessible. If you rename it, then you can access them through
* the new namespace name.
*
- * Custom namespaces should start at 100 and stop at 255 (hard limit set by
- * database).
+ * Custom namespaces should start at 100 to avoid conflicting with standard
+ * namespaces, and should always follow the even/odd main/talk pattern.
*/
#$wgExtraNamespaces =
# array(100 => "Hilfe",
# );
$wgExtraNamespaces = NULL;
-/**
- * Enable SOAP interface. Off by default
- * SOAP is a protocoll for remote procedure calls (RPC) using http as
- * middleware. This interface can be used by bots or special clients to receive
- * articles from a wiki.
- * Most bots use the normal HTTP interface and don't use SOAP.
- * If unsure, set to false.
- */
-$wgEnableSOAP = false;
-
/**
* Limit images on image description pages to a user-selectable limit. In order
* to reduce disk usage, limits can only be selected from a list. This is the
array(1280,1024),
array(10000,10000) );
-
-/** Navigation links for the user sidebar.
- * 'text' is the name of the MediaWiki message that contains the label of this link
- * 'href' is the name of the MediaWiki message that contains the link target of this link.
- * Link targets starting with http are considered remote links. Ones not starting with
- * http are considered as names of local wiki pages.
- */
-$wgNavigationLinks = array (
- array( 'text'=>'mainpage', 'href'=>'mainpage' ),
- array( 'text'=>'portal', 'href'=>'portal-url' ),
- array( 'text'=>'currentevents', 'href'=>'currentevents-url' ),
- array( 'text'=>'recentchanges', 'href'=>'recentchanges-url' ),
- array( 'text'=>'randompage', 'href'=>'randompage-url' ),
- array( 'text'=>'help', 'href'=>'helppage' ),
- array( 'text'=>'sitesupport', 'href'=>'sitesupport-url' ),
+/**
+ * Adjust thumbnails on image pages according to a user setting. In order to
+ * reduce disk usage, the values can only be selected from a list. This is the
+ * list of settings the user can choose from:
+ */
+$wgThumbLimits = array(
+ 120,
+ 150,
+ 180,
+ 200,
+ 250,
+ 300
);
/**
* Contains a list of regexps : "/regexp/" matching problematic browsers
*/
$wgBrowserBlackList = array(
- "/Mozilla\/4\.78 \[en\] \(X11; U; Linux/"
- // FIXME: Add some accurate, true things here
- );
+ "/Mozilla\/4\.78 \[en\] \(X11; U; Linux/",
+ /**
+ * MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH>
+ *
+ * Known useragents:
+ * - Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC)
+ * - Mozilla/4.0 (compatible; MSIE 5.15; Mac_PowerPC)
+ * - Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC)
+ * - [...]
+ *
+ * @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864
+ * @link http://en.wikipedia.org/wiki/Template%3AOS9
+ */
+ "/Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/"
+);
/**
* Fake out the timezone that the server thinks it's in. This will be used for
$wgLoggedInGroupId = 2;
$wgSysopGroupId = 3;
$wgBureaucratGroupId = 4;
+$wgStewardGroupId = 5;
/**
* When translating messages with wfMsg(), it is not always clear what should be
*/
$wgMinimalPasswordLength = 0;
-} else {
- die();
-}
-?>
\ No newline at end of file
+/**
+ * Activate external editor interface for files and pages
+ * See http://meta.wikimedia.org/wiki/Help:External_editors
+ */
+$wgUseExternalEditor = true;
+
+/** Whether or not to sort special pages in Special:Specialpages */
+
+$wgSortSpecialPages = true;
+
+/**
+ * Array of disabled article actions, e.g. view, edit, dublincore, delete, etc.
+ */
+$wgDisabledActions = array();
+
+/**
+ * Use http.dnsbl.sorbs.net to check for open proxies
+ */
+$wgEnableSorbs = false;
+
+/**
+ * On Special:Unusedimages, consider images "used", if they are put
+ * into a category. Default (false) is not to count those as used.
+ */
+$wgCountCategorizedImagesAsUsed = false;
+
+/**
+ * External stores allow including content
+ * from non database sources following URL links
+ *
+ * Short names of ExternalStore classes may be specified in an array here:
+ * $wgExternalStores = array("http","file","custom")...
+ *
+ * CAUTION: Access to database might lead to code execution
+ */
+$wgExternalStores = false;
+
+/**
+* list of trusted media-types and mime types.
+* Use the MEDIATYPE_xxx constants to represent media types.
+* This list is used by Image::isSafeFile
+*
+* Types not listed here will have a warning about unsafe content
+* displayed on the images description page. It would also be possible
+* to use this for further restrictions, like disabling direct
+* [[media:...]] links for non-trusted formats.
+*/
+$wgTrustedMediaFormats= array(
+ MEDIATYPE_BITMAP, //all bitmap formats
+ MEDIATYPE_AUDIO, //all audio formats
+ MEDIATYPE_VIDEO, //all plain video formats
+ "image/svg", //svg (only needed if inline rendering of svg is not supported)
+ "application/pdf", //PDF files
+ #"application/x-shockwafe-flash", //flash/shockwave movie
+);
+
+?>