* There are three supported ways to handle broadcasted operations:
* - a) Configure the 'purge' EventRelayer to point to a valid PubSub endpoint
* that has subscribed listeners on the cache servers applying the cache updates.
- * - b) Ignore the 'purge' EventRelayer configuration (default is NullEventRelayer)
- * and set up mcrouter as the underlying cache backend, using one of the memcached
- * BagOStuff classes as 'cache'. Use OperationSelectorRoute in the mcrouter settings
- * to configure 'set' and 'delete' operations to go to all DCs via AllAsyncRoute and
- * configure other operations to go to the local DC via PoolRoute (for reference,
- * see https://github.com/facebook/mcrouter/wiki/List-of-Route-Handles).
- * - c) Ignore the 'purge' EventRelayer configuration (default is NullEventRelayer)
- * and set up dynomite as cache middleware between the web servers and either
- * memcached or redis. This will also broadcast all key setting operations, not just purges,
- * which can be useful for cache warming. Writes are eventually consistent via the
- * Dynamo replication model (see https://github.com/Netflix/dynomite).
+ * - b) Ommit the 'purge' EventRelayer parameter and set up mcrouter as the underlying cache
+ * backend, using a memcached BagOStuff class for the 'cache' parameter. The 'region'
+ * and 'cluster' parameters must be provided and 'mcrouterAware' must be set to 'true'.
+ * Configure mcrouter as follows:
+ * - 1) Use Route Prefixing based on region (datacenter) and cache cluster.
+ * See https://github.com/facebook/mcrouter/wiki/Routing-Prefix and
+ * https://github.com/facebook/mcrouter/wiki/Multi-cluster-broadcast-setup
+ * - 2) To increase the consistency of delete() and touchCheckKey() during cache
+ * server membership changes, you can use the OperationSelectorRoute to
+ * configure 'set' and 'delete' operations to go to all servers in the cache
+ * cluster, instead of just one server determined by hashing.
+ * See https://github.com/facebook/mcrouter/wiki/List-of-Route-Handles
+ * - c) Ommit the 'purge' EventRelayer parameter and set up dynomite as cache middleware
+ * between the web servers and either memcached or redis. This will also broadcast all
+ * key setting operations, not just purges, which can be useful for cache warming.
+ * Writes are eventually consistent via the Dynamo replication model.
+ * See https://github.com/Netflix/dynomite
*
* Broadcasted operations like delete() and touchCheckKey() are done asynchronously
* in all datacenters this way, though the local one should likely be near immediate.
protected $purgeChannel;
/** @var EventRelayer Bus that handles purge broadcasts */
protected $purgeRelayer;
+ /** @bar bool Whether to use mcrouter key prefixing for routing */
+ protected $mcrouterAware;
+ /** @var string Physical region for mcrouter use */
+ protected $region;
+ /** @var string Cache cluster name for mcrouter use */
+ protected $cluster;
/** @var LoggerInterface */
protected $logger;
/** @var StatsdDataFactoryInterface */
/** @var int Key fetched */
private $warmupKeyMisses = 0;
+ /** @var float|null */
+ private $wallClockOverride;
+
/** Max time expected to pass between delete() and DB commit finishing */
const MAX_COMMIT_DELAY = 3;
/** Max replication+snapshot lag before applying TTL_LAGGED or disallowing set() */
const LOCK_TTL = 10;
/** Default remaining TTL at which to consider pre-emptive regeneration */
const LOW_TTL = 30;
- /** Default time-since-expiry on a miss that makes a key "hot" */
- const LOCK_TSE = 1;
/** Never consider performing "popularity" refreshes until a key reaches this age */
const AGE_NEW = 60;
* callback supplied by the getWithSetCallback() caller. The result will be saved
* as normal. The handler is expected to call the WAN cache callback at an opportune
* time (e.g. HTTP post-send), though generally within a few 100ms. [optional]
+ * - region: the current physical region. This is required when using mcrouter as the
+ * backing store proxy. [optional]
+ * - cluster: name of the cache cluster used by this WAN cache. The name must be the
+ * same in all datacenters; the ("region","cluster") tuple is what distinguishes
+ * the counterpart cache clusters among all the datacenter. The contents of
+ * https://github.com/facebook/mcrouter/wiki/Config-Files give background on this.
+ * This is required when using mcrouter as the backing store proxy. [optional]
+ * - mcrouterAware: set as true if mcrouter is the backing store proxy and mcrouter
+ * is configured to interpret /<region>/<cluster>/ key prefixes as routes. This
+ * requires that "region" and "cluster" are both set above. [optional]
*/
public function __construct( array $params ) {
$this->cache = $params['cache'];
$this->purgeRelayer = isset( $params['relayers']['purge'] )
? $params['relayers']['purge']
: new EventRelayerNull( [] );
+ $this->region = isset( $params['region'] ) ? $params['region'] : 'main';
+ $this->cluster = isset( $params['cluster'] ) ? $params['cluster'] : 'wan-main';
+ $this->mcrouterAware = !empty( $params['mcrouterAware'] );
+
$this->setLogger( isset( $params['logger'] ) ? $params['logger'] : new NullLogger() );
$this->stats = isset( $params['stats'] ) ? $params['stats'] : new NullStatsdDataFactory();
$this->asyncHandler = isset( $params['asyncHandler'] ) ? $params['asyncHandler'] : null;
* (e.g. the default REPEATABLE-READ in innoDB). Even for mutable data, that
* isolation can largely be maintained by doing the following:
* - a) Calling delete() on entity change *and* creation, before DB commit
- * - b) Keeping transaction duration shorter than delete() hold-off TTL
+ * - b) Keeping transaction duration shorter than the delete() hold-off TTL
+ * - c) Disabling interim key caching via useInterimHoldOffCaching() before get() calls
*
* However, pre-snapshot values might still be seen if an update was made
* in a remote datacenter but the purge from delete() didn't relay yet.
// Case B: any long-running transaction; ignore this set()
} elseif ( $age > self::MAX_READ_LAG ) {
$this->logger->info( 'Rejected set() for {cachekey} due to snapshot lag.',
- [ 'cachekey' => $key ] );
+ [ 'cachekey' => $key, 'lag' => $lag, 'age' => $age ] );
return true; // no-op the write for being unsafe
// Case C: high replication lag; lower TTL instead of ignoring all set()s
} elseif ( $lag === false || $lag > self::MAX_READ_LAG ) {
$ttl = $ttl ? min( $ttl, self::TTL_LAGGED ) : self::TTL_LAGGED;
$this->logger->warning( 'Lowered set() TTL for {cachekey} due to replication lag.',
- [ 'cachekey' => $key ] );
+ [ 'cachekey' => $key, 'lag' => $lag, 'age' => $age ] );
// Case D: medium length request with medium replication lag; ignore this set()
} else {
$this->logger->info( 'Rejected set() for {cachekey} due to high read lag.',
- [ 'cachekey' => $key ] );
+ [ 'cachekey' => $key, 'lag' => $lag, 'age' => $age ] );
return true; // no-op the write for being unsafe
}
}
/**
- * Locally set a key to expire soon if it is stale based on $purgeTimestamp
+ * Set a key to soon expire in the local cluster if it pre-dates $purgeTimestamp
*
* This sets stale keys' time-to-live at HOLDOFF_TTL seconds, which both avoids
* broadcasting in mcrouter setups and also avoids races with new tombstones.
}
/**
- * Locally set a "check" key to expire soon if it is stale based on $purgeTimestamp
+ * Set a "check" key to soon expire in the local cluster if it pre-dates $purgeTimestamp
*
* @param string $key Cache key
* @param int $purgeTimestamp UNIX timestamp of purge
if ( $purge && $purge[self::FLD_TIME] < $purgeTimestamp ) {
$isStale = true;
$this->logger->warning( "Reaping stale check key '$key'." );
- $ok = $this->cache->changeTTL( self::TIME_KEY_PREFIX . $key, 1 );
+ $ok = $this->cache->changeTTL( self::TIME_KEY_PREFIX . $key, self::TTL_SECOND );
if ( !$ok ) {
$this->logger->error( "Could not complete reap of check key '$key'." );
}
* @return bool Success
*/
protected function relayPurge( $key, $ttl, $holdoff ) {
- if ( $this->purgeRelayer instanceof EventRelayerNull ) {
+ if ( $this->mcrouterAware ) {
+ // See https://github.com/facebook/mcrouter/wiki/Multi-cluster-broadcast-setup
+ // Wildcards select all matching routes, e.g. the WAN cluster on all DCs
+ $ok = $this->cache->set(
+ "/*/{$this->cluster}/{$key}",
+ $this->makePurgeValue( $this->getCurrentTime(), self::HOLDOFF_NONE ),
+ $ttl
+ );
+ } elseif ( $this->purgeRelayer instanceof EventRelayerNull ) {
// This handles the mcrouter and the single-DC case
- $ok = $this->cache->set( $key,
+ $ok = $this->cache->set(
+ $key,
$this->makePurgeValue( $this->getCurrentTime(), self::HOLDOFF_NONE ),
$ttl
);
'cmd' => 'set',
'key' => $key,
'val' => 'PURGED:$UNIXTIME$:' . (int)$holdoff,
- 'ttl' => max( $ttl, 1 ),
+ 'ttl' => max( $ttl, self::TTL_SECOND ),
'sbt' => true, // substitute $UNIXTIME$ with actual microtime
] );
* @return bool Success
*/
protected function relayDelete( $key ) {
- if ( $this->purgeRelayer instanceof EventRelayerNull ) {
- // This handles the mcrouter and the single-DC case
+ if ( $this->mcrouterAware ) {
+ // See https://github.com/facebook/mcrouter/wiki/Multi-cluster-broadcast-setup
+ // Wildcards select all matching routes, e.g. the WAN cluster on all DCs
+ $ok = $this->cache->delete( "/*/{$this->cluster}/{$key}" );
+ } elseif ( $this->purgeRelayer instanceof EventRelayerNull ) {
+ // Some other proxy handles broadcasting or there is only one datacenter
$ok = $this->cache->delete( $key );
} else {
$event = $this->cache->modifySimpleRelayEvent( [
return isset( $parts[1] ) ? $parts[1] : $parts[0]; // sanity
}
- /**
- * @return float UNIX timestamp
- * @codeCoverageIgnore
- */
- protected function getCurrentTime() {
- return microtime( true );
- }
-
/**
* @param string $value Wrapped value like "PURGED:<timestamp>:<holdoff>"
* @return array|bool Array containing a UNIX timestamp (float) and holdoff period (integer),
return $warmupCache;
}
+
+ /**
+ * @return float UNIX timestamp
+ * @codeCoverageIgnore
+ */
+ protected function getCurrentTime() {
+ return $this->wallClockOverride ?: microtime( true );
+ }
+
+ /**
+ * @param float|null &$time Mock UNIX timestamp for testing
+ * @codeCoverageIgnore
+ */
+ public function setMockTime( &$time ) {
+ $this->wallClockOverride =& $time;
+ $this->cache->setMockTime( $time );
+ }
}