LocalSettings.sample

   1 <?php
   2 # Local settings work like this: the file LocalSettings.sample
   3 # should be copied to LocalSettings.php in the source directory
   4 # and edited for your local file system settings and software
   5 # configuration preferences. The install script will copy it to
   6 # the installation path, but a copy should also remain in the
   7 # source tree so that maintenance scripts can refer to it (you
   8 # may want to make it a symbolic link after installation).
   9
  10 # Developers: Do not check LocalSettings.php into CVS! Make
  11 # changes to LocalSettings.sample instead.
  12
  13 # Note that you will find many more settings in
  14 # includes/DefaultSettings.php - if you want to change any of
  15 # them, copy the variables into LocalSettings.php, and change them
  16 # here, otherwise your settings will be overwritten with your
  17 # next update.
  18
  19 # The most important setting is here: $IP is the installation
  20 # path for the software. In the example below, the htdocs
  21 # dir should be set as the DocumentRoot in the httpd.conf
  22 # configuration file of Apache. To put it more simply:
  23 # The directory below needs to be accessible in some way
  24 # through your web browser.
  25 #
  26 $IP = "/usr/local/apache/htdocs/wiki";
  27
  28
  29 ## Don't change this bit; install.php needs it.
  30 #
  31 if ( ! isset( $DP ) ) { $DP = $IP; }
  32 include_once( "$DP/DefaultSettings.php" );
  33
  34 ## Please customize!
  35 #
  36 $wgSitename         = "MediaWiki";
  37
  38 # You can customize a lot of URLs and paths, but you will
  39 # almost certainly want to customize the following.  The
  40
  41 # Normally the server will be auto-detected, but you can
  42 # force the base URL. Don't forget http:// (or https://)!
  43 #
  44 #$wgServer           = "http://www.myhost.com";
  45
  46 ## The location of the main script, you need this to be correct!
  47 #
  48 $wgScriptPath       = "/wiki";
  49 $wgScript           = "{$wgScriptPath}/index.php";
  50 $wgRedirectScript   = "{$wgScriptPath}/redirect.php";
  51
  52 # ArticlePath one is especially useful if you want to use
  53 # mod_redirect to make page-viewing URLs look static.
  54 #
  55 $wgArticlePath      = "{$wgScript}?title=$1";
  56 # $wgArticlePath     = "/wiki/$1"; # Prettier if you're setup for it
  57
  58 ## Normally you don't need to change these once the above are set...
  59 #
  60 $wgStyleSheetPath   = "{$wgScriptPath}/style";
  61 $wgStyleSheetDirectory = "{$IP}/style";
  62
  63 $wgUploadPath       = "{$wgScriptPath}/upload";
  64 $wgUploadDirectory      = "{$IP}/upload";
  65 $wgLogo                         = "{$wgUploadPath}/wiki.png";
  66
  67 ## Preferably these addresses should be able to receive mail asking for help
  68 #
  69 $wgEmergencyContact = "wikiadmin@" . getenv( "SERVER_NAME" );
  70 $wgPasswordSender       = "Wikipedia Mail <apache@" . getenv( "SERVER_NAME" ) . ">";
  71
  72 # MySQL settings
  73 #
  74 # The user you specify here DOES NOT NEED TO EXIST.
  75 # It is created by the installation script, if
  76 # you have root privileges on your database.
  77 #
  78 # IF on the other hand you have only limited privs
  79 # on your DB and have to do a manual install, use
  80 # your existing username and password. Be sure this
  81 # file doesn't get left around on the web legible...
  82 #
  83 # $wgDBsqluser is used for queries through the
  84 # web interface. It is also created by the script.
  85 # Unlike the regular user, it has no write
  86 # permissions and can not access passwords.
  87 #
  88 $wgDBserver         = "localhost";
  89 $wgDBname           = "wikidb";
  90 $wgDBuser           = "wikiuser";
  91 $wgDBpassword       = "userpass"; # Use a better password! ;)
  92 $wgDBsqluser        = "sqluser";
  93 $wgDBsqlpassword        = "sqlpass";
  94
  95 ## Advanced DB settings
  96 #
  97 $wgDBminWordLen         = 3;     # Match this to your MySQL fulltext
  98
  99 ## Set these to true to turn on some optimizations when using
 100 ## MySQL 4.x:
 101 #
 102 # $wgDBmysql4                   = true;
 103 # $wgEnablePersistentLC = true;
 104
 105 ## You can customize the interface messages through the wiki;
 106 ## see [[MediaWiki:All pages]]. (This requires a sysop account.)
 107 ## This causes a performance hit, though; if you don't need it,
 108 ## feel free to turn it off:
 109 #
 110 # $wgUseDatabaseMessages = false;
 111
 112 ## Set $wgUseImageResize to true if you want to enable dynamic
 113 ## server side image resizing ("Thumbnails")
 114 #
 115 # $wgUseImageResize             = true;
 116
 117 ## Resizing can be done using PHP's internal image libraries
 118 ## or using ImageMagick. The later supports more file formats
 119 ## than PHP, which only supports PNG, GIF, JPG, XBM and WBMP.
 120 ##
 121 ## Set $wgUseImageMagick to true to use Image Magick instead
 122 ## of the builtin functions
 123 #
 124 # $wgUseImageMagick             = true;
 125 # $wgImageMagickConvertCommand    = "/usr/bin/convert";
 126
 127 ## If you have the appropriate support software installed
 128 ## you can enable inline LaTeX equations:
 129 # $wgUseTeX                     = true;
 130 # $wgMathPath         = "{$wgUploadPath}/math";
 131 # $wgMathDirectory    = "{$wgUploadDirectory}/math";
 132 # $wgTmpDirectory     = "{$wgUploadDirectory}/tmp";
 133
 134 $wgLocalInterwiki   = $wgSitename;
 135
 136 ## If you want a non-English wiki, add a line like this
 137 # $wgLanguageCode = "de";
 138
 139 ## Character encoding: normally auto-selected by the language.
 140 ## English, German, Danish, Dutch, French, Spanish, and Swedish
 141 ## will be in ISO-8859-1 by default, all other languages in
 142 ## UTF-8 encoding. UTF-8 is more flexible, but some older browsers
 143 ## have trouble with it. You can force an English-language wiki
 144 ## to UTF-8 by uncommenting the lines below. The other languages
 145 ## mentioned above might not work properly this way without
 146 ## additional tweaking.
 147 #
 148 # $wgInputEncoding      = "UTF-8";
 149 # $wgOutputEncoding     = "UTF-8";
 150
 151 ## Extremely high-traffic wikis may want to disable
 152 ## some database-intensive features here:
 153 #
 154 # $wgDisableTextSearch = true;
 155 # $wgDisableCounters = true;
 156 # $wgMiserMode          = true;
 157
 158 ## The following three config variables are used to define
 159 ## the rights of users in your system.
 160 #
 161 # If wgWhitelistEdit is set to true, only logged in users
 162 # are allowed to edit articles.
 163 # If wgWhitelistRead is set to true, only logged in users
 164 # are allowed to read articles.
 165 #
 166 # wgWhitelistAccount lists user types that can add user accounts:
 167 # "key" => 1 defines permission if user has right "key".
 168 #
 169 # Typical setups are:
 170 #
 171 # Everything goes (this is the default behaviour):
 172 # $wgWhitelistEdit = false;
 173 # $wgWhitelistRead = false;
 174 # $wgWhitelistAccount = array ( "user" => 1, "sysop" => 1, "developer" => 1 );
 175 #
 176 # Invitation-only closed shop type of system
 177 # $wgWhitelistEdit = true;
 178 # $wgWhitelistRead = true;
 179 # $wgWhitelistAccount = array ( "user" => 0, "sysop" => 1, "developer" => 1 );
 180 #
 181 # Public website, closed editorial team
 182 # $wgWhitelistEdit = true;
 183 # $wgWhitelistRead = false;
 184 # $wgWhitelistAccount = array ( "user" => 0, "sysop" => 1, "developer" => 1 );
 185
 186
 187 # Squid-related settings
 188 #
 189 # Enable/disable Squid
 190 # $wgUseSquid = true;
 191 # If you run Squid3 with ESI support, enable this (default:false):
 192 # $wgUseESI = true;
 193 # Internal server name as known to Squid, if different
 194 # $wgInternalServer = 'http://yourinternal.tld:8000';
 195 # Cache timeout for the squid, will be sent as s-maxage (without ESI) or
 196 # Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in the Squid config.
 197 # 18000 seconds = 5 hours, more cache hits with 2678400 = 31 days
 198 # $wgSquidMaxage = 18000;
 199 # A list of proxy servers (ips if possible) to purge on changes
 200 # don't specify ports here (80 is default)
 201 # $wgSquidServers = array('127.0.0.1');
 202 ?>